From: Huacai Chen <chenhuacai@gmail.com>
To: Marc Zyngier <maz@kernel.org>
Cc: Huacai Chen <chenhuacai@loongson.cn>,
Thomas Gleixner <tglx@linutronix.de>,
LKML <linux-kernel@vger.kernel.org>,
Xuefeng Li <lixuefeng@loongson.cn>,
Jiaxun Yang <jiaxun.yang@flygoat.com>
Subject: Re: [PATCH 7/9] irqchip: Add LoongArch CPU interrupt controller support
Date: Wed, 7 Jul 2021 12:57:17 +0800 [thread overview]
Message-ID: <CAAhV-H4ToQ=r8f7pkf3JGoDj2MkrZA+MkMoDEVnQHYZA8exWiA@mail.gmail.com> (raw)
In-Reply-To: <8735sr8tob.wl-maz@kernel.org>
Hi, Marc,
On Tue, Jul 6, 2021 at 9:21 PM Marc Zyngier <maz@kernel.org> wrote:
>
> On Tue, 06 Jul 2021 04:09:02 +0100,
> Huacai Chen <chenhuacai@loongson.cn> wrote:
> >
> > We are preparing to add new Loongson (based on LoongArch, not MIPS)
> > support. This patch add LoongArch CPU interrupt controller support.
> >
> > Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
> > ---
> > drivers/irqchip/Kconfig | 10 ++++
> > drivers/irqchip/Makefile | 1 +
> > drivers/irqchip/irq-loongarch-cpu.c | 87 +++++++++++++++++++++++++++++
> > 3 files changed, 98 insertions(+)
> > create mode 100644 drivers/irqchip/irq-loongarch-cpu.c
> >
> > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> > index 084bc4c2eebd..443c3a7a0cc1 100644
> > --- a/drivers/irqchip/Kconfig
> > +++ b/drivers/irqchip/Kconfig
> > @@ -528,6 +528,16 @@ config EXYNOS_IRQ_COMBINER
> > Say yes here to add support for the IRQ combiner devices embedded
> > in Samsung Exynos chips.
> >
> > +config IRQ_LOONGARCH_CPU
> > + bool
> > + select GENERIC_IRQ_CHIP
> > + select IRQ_DOMAIN
> > + select GENERIC_IRQ_EFFECTIVE_AFF_MASK
> > + help
> > + Support for the LoongArch CPU Interrupt Controller. For details of
> > + irq chip hierarchy on LoongArch platforms please read the document
> > + Documentation/loongarch/irq-chip-model.rst.
> > +
> > config LOONGSON_LIOINTC
> > bool "Loongson Local I/O Interrupt Controller"
> > depends on MACH_LOONGSON64
> > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> > index f88cbf36a9d2..4e34eebe180b 100644
> > --- a/drivers/irqchip/Makefile
> > +++ b/drivers/irqchip/Makefile
> > @@ -105,6 +105,7 @@ obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
> > obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o
> > obj-$(CONFIG_TI_SCI_INTA_IRQCHIP) += irq-ti-sci-inta.o
> > obj-$(CONFIG_TI_PRUSS_INTC) += irq-pruss-intc.o
> > +obj-$(CONFIG_IRQ_LOONGARCH_CPU) += irq-loongarch-cpu.o
> > obj-$(CONFIG_LOONGSON_LIOINTC) += irq-loongson-liointc.o
> > obj-$(CONFIG_LOONGSON_HTPIC) += irq-loongson-htpic.o
> > obj-$(CONFIG_LOONGSON_HTVEC) += irq-loongson-htvec.o
> > diff --git a/drivers/irqchip/irq-loongarch-cpu.c b/drivers/irqchip/irq-loongarch-cpu.c
> > new file mode 100644
> > index 000000000000..918d61a5a980
> > --- /dev/null
> > +++ b/drivers/irqchip/irq-loongarch-cpu.c
> > @@ -0,0 +1,87 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2020 Loongson Technologies, Inc.
> > + */
> > +
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqdomain.h>
> > +
> > +#include <asm/setup.h>
> > +#include <asm/loongarchregs.h>
> > +
> > +static struct irq_domain *irq_domain;
> > +
> > +static inline void unmask_loongarch_irq(struct irq_data *d)
> > +{
> > + set_csr_ecfg(ECFGF(d->hwirq));
> > +}
> > +
> > +static inline void mask_loongarch_irq(struct irq_data *d)
> > +{
> > + clear_csr_ecfg(ECFGF(d->hwirq));
> > +}
> > +
> > +#define enable_loongarch_irq unmask_loongarch_irq
> > +#define disable_loongarch_irq mask_loongarch_irq
> > +
> > +static struct irq_chip loongarch_cpu_irq_controller = {
> > + .name = "LoongArch",
> > + .irq_ack = mask_loongarch_irq,
> > + .irq_mask = mask_loongarch_irq,
> > + .irq_mask_ack = mask_loongarch_irq,
> > + .irq_unmask = unmask_loongarch_irq,
> > + .irq_eoi = unmask_loongarch_irq,
> > + .irq_enable = enable_loongarch_irq,
> > + .irq_disable = disable_loongarch_irq,
>
> NAK. Clearly, you don't understand what these callbacks do.
>
> > +};
> > +
> > +asmlinkage void __weak plat_irq_dispatch(int irq)
> > +{
> > + do_IRQ(irq_linear_revmap(irq_domain, irq));
> > +}
>
> NAK. If you are going to add a new architecture to Linux, do not mimic
> the MIPS brain-damage. Have your new architecture to support multiple
> interrupt controllers from day one without the need to add these silly
> weak symbols.
>
> Move the low-level code such as this into the architecture code, and
> use the existing domain abstractions.
Thanks, I will consider to rework the whole thing.
Huacai
>
> > +
> > +static int loongarch_cpu_intc_map(struct irq_domain *d, unsigned int irq,
> > + irq_hw_number_t hwirq)
> > +{
> > + struct irq_chip *chip;
> > +
> > + chip = &loongarch_cpu_irq_controller;
> > + set_vi_handler(EXCCODE_INT_START + hwirq, plat_irq_dispatch);
> > + irq_set_chip_and_handler(irq, chip, handle_percpu_irq);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct irq_domain_ops loongarch_cpu_intc_irq_domain_ops = {
> > + .map = loongarch_cpu_intc_map,
> > + .xlate = irq_domain_xlate_onecell,
>
> Are all interrupts with the same trigger?
>
> > +};
> > +
> > +
> > +int __init loongarch_cpu_irq_init(struct device_node *of_node, struct device_node *parent)
> > +{
> > + int i;
> > +
> > + /* Mask interrupts. */
> > + clear_csr_ecfg(ECFG0_IM);
> > + clear_csr_estat(ESTATF_IP);
> > +
> > + irq_alloc_descs(-1, LOONGSON_CPU_IRQ_BASE, EXCCODE_INT_NUM, 0);
> > +
> > + for (i = LOONGSON_CPU_IRQ_BASE; i <= LOONGSON_CPU_LAST_IRQ; i++)
> > + irq_set_noprobe(i);
> > +
> > + irq_domain = irq_domain_add_legacy(of_node, EXCCODE_INT_NUM,
> > + LOONGSON_CPU_IRQ_BASE, 0, &loongarch_cpu_intc_irq_domain_ops, NULL);
>
> Oh, the irony of using irq_domain_add_legacy() for a brand new
> architecture...
>
> > +
> > + if (!irq_domain)
> > + panic("Failed to add irqdomain for loongarch CPU");
> > +
> > + return 0;
> > +}
> > +
> > +IRQCHIP_DECLARE(cpu_intc, "loongson,cpu-interrupt-controller", loongarch_cpu_irq_init);
>
> As it stands, this driver has zero chance of being merged. You
> seriously need to move your low-level interrupt handling code into the
> 21st century.
>
> M.
>
> --
> Without deviation from the norm, progress is not possible.
next prev parent reply other threads:[~2021-07-07 4:57 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-06 3:08 [PATCH 0/9] irqchip: Add LoongArch-related irqchip drivers Huacai Chen
2021-07-06 3:08 ` [PATCH 1/9] irqchip: Adjust Kconfig for Loongson Huacai Chen
2021-07-06 3:08 ` [PATCH 2/9] irqchip/loongson-pch-pic: Improve edge triggered interrupt support Huacai Chen
2021-07-06 13:06 ` Marc Zyngier
2021-07-09 3:00 ` Huacai Chen
2021-08-04 14:23 ` Marc Zyngier
2021-08-05 13:06 ` Huacai Chen
2021-07-06 3:08 ` [PATCH 3/9] irqchip/loongson-pch-pic: Add ACPI init support Huacai Chen
2021-07-06 13:10 ` Marc Zyngier
2021-07-07 4:50 ` Huacai Chen
2021-08-12 12:23 ` Huacai Chen
2021-08-12 13:28 ` Marc Zyngier
2021-08-16 3:19 ` Huacai Chen
2021-07-06 3:08 ` [PATCH 4/9] irqchip/loongson-pch-msi: " Huacai Chen
2021-07-06 13:12 ` Marc Zyngier
2021-07-07 4:51 ` Huacai Chen
2021-07-06 3:09 ` [PATCH 5/9] irqchip/loongson-htvec: " Huacai Chen
2021-07-06 13:13 ` Marc Zyngier
2021-07-07 4:52 ` Huacai Chen
2021-07-06 3:09 ` [PATCH 6/9] irqchip/loongson-liointc: " Huacai Chen
2021-07-06 3:09 ` [PATCH 7/9] irqchip: Add LoongArch CPU interrupt controller support Huacai Chen
2021-07-06 13:21 ` Marc Zyngier
2021-07-07 4:57 ` Huacai Chen [this message]
2021-07-06 3:09 ` [PATCH 8/9] irqchip: Add Loongson Extended I/O " Huacai Chen
2021-07-06 3:09 ` [PATCH 9/9] irqchip: Add Loongson PCH LPC " Huacai Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAAhV-H4ToQ=r8f7pkf3JGoDj2MkrZA+MkMoDEVnQHYZA8exWiA@mail.gmail.com' \
--to=chenhuacai@gmail.com \
--cc=chenhuacai@loongson.cn \
--cc=jiaxun.yang@flygoat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lixuefeng@loongson.cn \
--cc=maz@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).