From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-kernel@vger.kernel.org,
Amarula patchwork <linux-amarula@amarulasolutions.com>,
michael@amarulasolutions.com,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jakub Kicinski <kuba@kernel.org>,
Jiri Slaby <jirislaby@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
Wolfgang Grandegger <wg@grandegger.com>,
linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [RFC PATCH 11/13] can: slcan: add ethtool support to reset adapter errors
Date: Wed, 8 Jun 2022 18:33:08 +0200 [thread overview]
Message-ID: <CABGWkvozX51zeQt16bdh+edsjwqST5A11qtfxYjTvP030DnToQ@mail.gmail.com> (raw)
In-Reply-To: <20220607105225.xw33w32en7fd4vmh@pengutronix.de>
Hi Marc,
On Tue, Jun 7, 2022 at 12:52 PM Marc Kleine-Budde <mkl@pengutronix.de> wrote:
>
> On 07.06.2022 11:47:50, Dario Binacchi wrote:
> > This patch adds a private flag to the slcan driver to switch the
> > "err-rst-on-open" setting on and off.
> >
> > "err-rst-on-open" on - Reset error states on opening command
> >
> > "err-rst-on-open" off - Don't reset error states on opening command
> > (default)
> >
> > The setting can only be changed if the interface is down:
> >
> > ip link set dev can0 down
> > ethtool --set-priv-flags can0 err-rst-on-open {off|on}
> > ip link set dev can0 up
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>
> I'm a big fan of bringing the device into a well known good state during
> ifup. What would be the reasons/use cases to not reset the device?
Because by default either slcand and slcan_attach don't reset the error states,
but you must use the `-f' option to do so. So, I followed this use case.
Thanks and regards,
Dario
>
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Embedded Linux | https://www.pengutronix.de |
> Vertretung West/Dortmund | Phone: +49-231-2826-924 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
Dario Binacchi
Embedded Linux Developer
dario.binacchi@amarulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@amarulasolutions.com
www.amarulasolutions.com
next prev parent reply other threads:[~2022-06-08 16:34 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-07 9:47 [RFC PATCH 00/13] can: slcan: extend supported features Dario Binacchi
2022-06-07 9:47 ` [RFC PATCH 01/13] can: slcan: use the BIT() helper Dario Binacchi
2022-06-07 9:47 ` [RFC PATCH 02/13] can: slcan: use netdev helpers to print out messages Dario Binacchi
2022-06-07 9:47 ` [RFC PATCH 03/13] can: slcan: use the alloc_can_skb() helper Dario Binacchi
2022-06-07 10:15 ` Marc Kleine-Budde
2022-06-07 9:47 ` [RFC PATCH 04/13] can: slcan: use CAN network device driver API Dario Binacchi
2022-06-07 11:13 ` Marc Kleine-Budde
2022-06-08 16:42 ` Dario Binacchi
2022-06-09 7:07 ` Marc Kleine-Budde
2022-06-12 21:24 ` Dario Binacchi
2022-06-07 9:47 ` [RFC PATCH 05/13] can: slcan: simplify the device de-allocation Dario Binacchi
2022-06-07 20:45 ` Oliver Hartkopp
2022-06-07 9:47 ` [RFC PATCH 06/13] can: slcan: allow to send commands to the adapter Dario Binacchi
2022-06-09 7:16 ` Marc Kleine-Budde
2022-06-11 21:43 ` Dario Binacchi
2022-06-12 10:39 ` Marc Kleine-Budde
2022-06-07 9:47 ` [RFC PATCH 07/13] can: slcan: set bitrate by CAN device driver API Dario Binacchi
2022-06-07 10:09 ` Marc Kleine-Budde
2022-06-07 9:47 ` [RFC PATCH 08/13] can: slcan: send the open command to the adapter Dario Binacchi
2022-06-07 11:00 ` Marc Kleine-Budde
2022-06-07 9:47 ` [RFC PATCH 09/13] can: slcan: send the close " Dario Binacchi
2022-06-07 9:47 ` [RFC PATCH 10/13] can: slcan: move driver into separate sub directory Dario Binacchi
2022-06-07 9:47 ` [RFC PATCH 11/13] can: slcan: add ethtool support to reset adapter errors Dario Binacchi
2022-06-07 10:52 ` Marc Kleine-Budde
2022-06-08 16:33 ` Dario Binacchi [this message]
2022-06-09 6:38 ` Marc Kleine-Budde
2022-06-09 7:24 ` Dario Binacchi
2022-06-09 8:01 ` Marc Kleine-Budde
2022-06-09 8:52 ` Dario Binacchi
2022-06-10 10:51 ` Marc Kleine-Budde
2022-06-07 9:47 ` [RFC PATCH 12/13] can: slcan: extend the protocol with error info Dario Binacchi
2022-06-07 10:56 ` Marc Kleine-Budde
2022-06-07 9:47 ` [RFC PATCH 13/13] can: slcan: extend the protocol with CAN state info Dario Binacchi
2022-06-07 10:13 ` Marc Kleine-Budde
2022-06-07 10:27 ` [RFC PATCH 00/13] can: slcan: extend supported features Vincent MAILHOL
2022-06-07 10:39 ` Marc Kleine-Budde
2022-06-07 12:20 ` Vincent MAILHOL
2022-06-07 12:19 ` Vincent MAILHOL
2022-06-07 23:55 ` Max Staudt
2022-06-08 0:15 ` Max Staudt
2022-06-08 7:19 ` Marc Kleine-Budde
2022-06-08 12:55 ` Max Staudt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CABGWkvozX51zeQt16bdh+edsjwqST5A11qtfxYjTvP030DnToQ@mail.gmail.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=bigeasy@linutronix.de \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=michael@amarulasolutions.com \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).