From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755289AbcHCDPK (ORCPT ); Tue, 2 Aug 2016 23:15:10 -0400 Received: from mail-qt0-f171.google.com ([209.85.216.171]:33857 "EHLO mail-qt0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753709AbcHCDPF (ORCPT ); Tue, 2 Aug 2016 23:15:05 -0400 MIME-Version: 1.0 In-Reply-To: <1470189811-6604-1-git-send-email-zyw@rock-chips.com> References: <1470189811-6604-1-git-send-email-zyw@rock-chips.com> From: Guenter Roeck Date: Tue, 2 Aug 2016 20:15:03 -0700 Message-ID: Subject: Re: [v9.1 PATCH 3/6] phy: Add USB Type-C PHY driver for rk3399 To: Chris Zhong Cc: Douglas Anderson , Tomasz Figa , =?UTF-8?Q?Heiko_St=C3=BCbner?= , =?UTF-8?B?5aea5pm65oOF?= , Guenter Roeck , myungjoo.ham@samsung.com, Chanwoo Choi , wulf , =?UTF-8?Q?St=C3=A9phane_Marchesin?= , "open list:ARM/Rockchip SoC..." , Kever Yang , Kishon Vijay Abraham I , linux-kernel , linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Aug 2, 2016 at 7:03 PM, Chris Zhong wrote: > Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB > Type-C PHY is designed to support the USB3 and DP applications. The > PHY basically has two main components: USB3 and DisplyPort. USB3 > operates in SuperSpeed mode and the DP can operate at RBR, HBR and > HBR2 data rates. Hence, create 2 PHY deivces, the phy[0] for DP, > and phy[1] for USB3. > > Signed-off-by: Chris Zhong > Signed-off-by: Kever Yang > > --- > > Changes in v9.1: > - better mutex lock for phy mode and flip > > Changes in v9: > - split the Type-C PHY into two PHYs: USB3 and DP > > Changes in v8: > - set the default cable id to EXTCON_USB_HOST > - optimization Error log > > Changes in v7: > - support new API of extcon > > Changes in v6: > - delete the support of PIN_ASSIGN_A/B > - set the default mode to MODE_DFP_USB > - disable DP PLL at USB3 only mode > > Changes in v5: > - support get property from extcon > - remove PIN ASSIGN A/B support > > Changes in v4: > - select EXTCON > - use phy framework to control the USB3 and DP function > - rename PIN_MAP_ to PIN_ASSIGN_ > > Changes in v3: > - remove the phy framework(Kishon Vijay Abraham I) > - add parentheses around the macro > - use a single space between type and name > - add spaces after opening and before closing braces. > - use u16 for register value > - remove type-c phy header file > - CodingStyle optimization > - use some cable extcon to get type-c port information > - add a extcon to notify Display Port > > Changes in v2: > - select RESET_CONTROLLER > - alphabetic order > - modify some spelling mistakes > - make mode cleaner > - use bool for enable/disable > - check all of the return value > - return a better err number > - use more readx_poll_timeout() > - clk_disable_unprepare(tcphy->clk_ref); > - remove unuse functions, rockchip_typec_phy_power_on/off > - remove unnecessary typecast from void * > - use dts node to distinguish between phys. > > Changes in v1: > - update the licence note > - init core clock to 50MHz > - use extcon API > - remove unused global > - add some comments for magic num > - change usleep_range(1000, 2000) tousleep_range(1000, 1050) > - remove __func__ from dev_err > - return err number when get clk failed > - remove ADDR_ADJ define > - use devm_clk_get(&pdev->dev, "tcpdcore") > > drivers/phy/Kconfig | 9 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-rockchip-typec.c | 1004 ++++++++++++++++++++++++++++++++++++++ > 3 files changed, 1014 insertions(+) > create mode 100644 drivers/phy/phy-rockchip-typec.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 26566db..83706a5 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -351,6 +351,15 @@ config PHY_ROCKCHIP_DP > help > Enable this to support the Rockchip Display Port PHY. > > +config PHY_ROCKCHIP_TYPEC > + tristate "Rockchip TYPEC PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select EXTCON > + select GENERIC_PHY > + select RESET_CONTROLLER > + help > + Enable this to support the Rockchip USB TYPEC PHY. > + > config PHY_ST_SPEAR1310_MIPHY > tristate "ST SPEAR1310-MIPHY driver" > select GENERIC_PHY > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 24596a9..91fa413 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -39,6 +39,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o > obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c > new file mode 100644 > index 0000000..27a1663 > --- /dev/null > +++ b/drivers/phy/phy-rockchip-typec.c > @@ -0,0 +1,1004 @@ > +/* > + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd > + * Author: Chris Zhong > + * Kever Yang > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > + > +#define CMN_SSM_BANDGAP (0x21 << 2) > +#define CMN_SSM_BIAS (0x22 << 2) > +#define CMN_PLLSM0_PLLEN (0x29 << 2) > +#define CMN_PLLSM0_PLLPRE (0x2a << 2) > +#define CMN_PLLSM0_PLLVREF (0x2b << 2) > +#define CMN_PLLSM0_PLLLOCK (0x2c << 2) > +#define CMN_PLLSM1_PLLEN (0x31 << 2) > +#define CMN_PLLSM1_PLLPRE (0x32 << 2) > +#define CMN_PLLSM1_PLLVREF (0x33 << 2) > +#define CMN_PLLSM1_PLLLOCK (0x34 << 2) > +#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2) > +#define CMN_ICAL_OVRD (0xc1 << 2) > +#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2) > +#define CMN_PLL0_VCOCAL_INIT (0x84 << 2) > +#define CMN_PLL0_VCOCAL_ITER (0x85 << 2) > +#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2) > +#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2) > +#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2) > +#define CMN_PLL0_INTDIV (0x94 << 2) > +#define CMN_PLL0_FRACDIV (0x95 << 2) > +#define CMN_PLL0_HIGH_THR (0x96 << 2) > +#define CMN_PLL0_DSM_DIAG (0x97 << 2) > +#define CMN_PLL0_SS_CTRL1 (0x98 << 2) > +#define CMN_PLL0_SS_CTRL2 (0x99 << 2) > +#define CMN_PLL1_VCOCAL_START (0xa1 << 2) > +#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2) > +#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2) > +#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2) > +#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2) > +#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2) > +#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2) > +#define CMN_PLL1_INTDIV (0xb4 << 2) > +#define CMN_PLL1_FRACDIV (0xb5 << 2) > +#define CMN_PLL1_HIGH_THR (0xb6 << 2) > +#define CMN_PLL1_DSM_DIAG (0xb7 << 2) > +#define CMN_PLL1_SS_CTRL1 (0xb8 << 2) > +#define CMN_PLL1_SS_CTRL2 (0xb9 << 2) > +#define CMN_RXCAL_OVRD (0xd1 << 2) > +#define CMN_TXPUCAL_CTRL (0xe0 << 2) > +#define CMN_TXPUCAL_OVRD (0xe1 << 2) > +#define CMN_TXPDCAL_OVRD (0xf1 << 2) > +#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2) > +#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2) > +#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2) > +#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2) > +#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2) > +#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2) > +#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2) > +#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2) > +#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2) > +#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2) > +#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2) > +#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2) > +#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2) > +#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2) > +#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2) > +#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2) > + > +#define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2) > +#define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2) > +#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2) > +#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2) > +#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2) > +#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2) > +#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2) > +#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2) > +#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2) > +#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2) > +#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2) > +#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2) > +#define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2) > +#define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2) > +#define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2) > +#define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2) > +#define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2) > +#define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2) > +#define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2) > +#define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2) > +#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2) > +#define TX_ANA_CTRL_REG_1 (0x5020 << 2) > +#define TX_ANA_CTRL_REG_2 (0x5021 << 2) > +#define TXDA_COEFF_CALC_CTRL (0x5022 << 2) > +#define TX_DIG_CTRL_REG_2 (0x5024 << 2) > +#define TXDA_CYA_AUXDA_CYA (0x5025 << 2) > +#define TX_ANA_CTRL_REG_3 (0x5026 << 2) > +#define TX_ANA_CTRL_REG_4 (0x5027 << 2) > +#define TX_ANA_CTRL_REG_5 (0x5029 << 2) > + > +#define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2) > +#define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2) > +#define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2) > +#define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2) > +#define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2) > +#define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2) > +#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2) > +#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2) > +#define RX_SDCAL0_OVRD (0x8041 << 2) > +#define RX_SDCAL1_OVRD (0x8049 << 2) > +#define RX_SLC_INIT (0x806d << 2) > +#define RX_SLC_RUN (0x806e << 2) > +#define RX_CDRLF_CNFG2 (0x8081 << 2) > +#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2) > +#define RX_SLC_IOP0_OVRD (0x8101 << 2) > +#define RX_SLC_IOP1_OVRD (0x8105 << 2) > +#define RX_SLC_QOP0_OVRD (0x8109 << 2) > +#define RX_SLC_QOP1_OVRD (0x810d << 2) > +#define RX_SLC_EOP0_OVRD (0x8111 << 2) > +#define RX_SLC_EOP1_OVRD (0x8115 << 2) > +#define RX_SLC_ION0_OVRD (0x8119 << 2) > +#define RX_SLC_ION1_OVRD (0x811d << 2) > +#define RX_SLC_QON0_OVRD (0x8121 << 2) > +#define RX_SLC_QON1_OVRD (0x8125 << 2) > +#define RX_SLC_EON0_OVRD (0x8129 << 2) > +#define RX_SLC_EON1_OVRD (0x812d << 2) > +#define RX_SLC_IEP0_OVRD (0x8131 << 2) > +#define RX_SLC_IEP1_OVRD (0x8135 << 2) > +#define RX_SLC_QEP0_OVRD (0x8139 << 2) > +#define RX_SLC_QEP1_OVRD (0x813d << 2) > +#define RX_SLC_EEP0_OVRD (0x8141 << 2) > +#define RX_SLC_EEP1_OVRD (0x8145 << 2) > +#define RX_SLC_IEN0_OVRD (0x8149 << 2) > +#define RX_SLC_IEN1_OVRD (0x814d << 2) > +#define RX_SLC_QEN0_OVRD (0x8151 << 2) > +#define RX_SLC_QEN1_OVRD (0x8155 << 2) > +#define RX_SLC_EEN0_OVRD (0x8159 << 2) > +#define RX_SLC_EEN1_OVRD (0x815d << 2) > +#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2) > +#define RX_DIAG_SC2C_DELAY (0x81e1 << 2) > + > +#define PMA_LANE_CFG (0xc000 << 2) > +#define PIPE_CMN_CTRL1 (0xc001 << 2) > +#define PIPE_CMN_CTRL2 (0xc002 << 2) > +#define PIPE_COM_LOCK_CFG1 (0xc003 << 2) > +#define PIPE_COM_LOCK_CFG2 (0xc004 << 2) > +#define PIPE_RCV_DET_INH (0xc005 << 2) > +#define DP_MODE_CTL (0xc008 << 2) > +#define DP_CLK_CTL (0xc009 << 2) > +#define STS (0xc00F << 2) > +#define PHY_ISO_CMN_CTRL (0xc010 << 2) > +#define PHY_DP_TX_CTL (0xc408 << 2) > +#define PMA_CMN_CTRL1 (0xc800 << 2) > +#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2) > +#define PHY_ISOLATION_CTRL (0xc81f << 2) > +#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2) > +#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2) > +#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2) > +#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2) > +#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2) > +#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2) > +#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2) > +#define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2) > +#define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2) > + > +/* > + * Selects which PLL clock will be driven on the analog high speed > + * clock 0: PLL 0 div 1 > + * clock 1: PLL 1 div 2 > + */ > +#define CLK_PLL_CONFIG 0X30 > +#define CLK_PLL_MASK 0x33 > + > +#define CMN_READY BIT(0) > + > +#define DP_PLL_CLOCK_ENABLE BIT(2) > +#define DP_PLL_ENABLE BIT(0) > +#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8)) > +#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8)) > +#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8)) > + > +#define GRF_SOC_CON26 0x6268 > +#define UPHY_DP_SEL BIT(3) > +#define UPHY_DP_SEL_MASK BIT(19) > +#define DPTX_HPD_SEL (3 << 12) > +#define DPTX_HPD_DEL (2 << 12) > +#define DPTX_HPD_SEL_MASK (3 << 28) > + > +#define DP_MODE_A0 BIT(4) > +#define DP_MODE_A2 BIT(6) > +#define DP_MODE_ENTER_A0 0xc101 > +#define DP_MODE_ENTER_A2 0xc104 > + > +#define PHY_MODE_SET_TIMEOUT 100000 > + > +#define PIN_ASSIGN_C_E 0x51d9 > +#define PIN_ASSIGN_D_F 0x5100 > + > +#define MODE_DISCONNECT 0 > +#define MODE_UFP_USB BIT(0) > +#define MODE_DFP_USB BIT(1) > +#define MODE_DFP_DP BIT(2) > + > +struct usb3phy_reg { > + u32 offset; > + u32 enable_bit; > + u32 write_enable; > +}; > + > +struct rockchip_usb3phy_port_cfg { > + struct usb3phy_reg typec_conn_dir; > + struct usb3phy_reg usb3tousb2_en; > + struct usb3phy_reg external_psm; > + struct usb3phy_reg pipe_status; > + struct usb3phy_reg uphy_dp_sel; > +}; > + > +struct rockchip_typec_phy { > + struct device *dev; > + void __iomem *base; > + struct extcon_dev *extcon; > + struct phy *phy[2]; > + struct regmap *grf_regs; > + struct clk *clk_core; > + struct clk *clk_ref; > + struct reset_control *uphy_rst; > + struct reset_control *pipe_rst; > + struct reset_control *tcphy_rst; > + struct rockchip_usb3phy_port_cfg port_cfgs; > + /* mutex to protect access to individual PHYs */ > + struct mutex lock; > + > + bool flip; > + u8 mode; > +}; > + > +struct phy_reg { > + u16 value; > + u32 addr; > +}; > + > +struct phy_reg usb_pll_cfg[] = { > + { 0xf0, CMN_PLL0_VCOCAL_INIT }, > + { 0x18, CMN_PLL0_VCOCAL_ITER }, > + { 0xd0, CMN_PLL0_INTDIV }, > + { 0x4a4a, CMN_PLL0_FRACDIV }, > + { 0x34, CMN_PLL0_HIGH_THR }, > + { 0x1ee, CMN_PLL0_SS_CTRL1 }, > + { 0x7f03, CMN_PLL0_SS_CTRL2 }, > + { 0x20, CMN_PLL0_DSM_DIAG }, > + { 0, CMN_DIAG_PLL0_OVRD }, > + { 0, CMN_DIAG_PLL0_FBH_OVRD }, > + { 0, CMN_DIAG_PLL0_FBL_OVRD }, > + { 0x7, CMN_DIAG_PLL0_V2I_TUNE }, > + { 0x45, CMN_DIAG_PLL0_CP_TUNE }, > + { 0x8, CMN_DIAG_PLL0_LF_PROG }, > +}; > + > +struct phy_reg dp_pll_cfg[] = { > + { 0xf0, CMN_PLL1_VCOCAL_INIT }, > + { 0x18, CMN_PLL1_VCOCAL_ITER }, > + { 0x30b9, CMN_PLL1_VCOCAL_START }, > + { 0x21c, CMN_PLL1_INTDIV }, > + { 0, CMN_PLL1_FRACDIV }, > + { 0x5, CMN_PLL1_HIGH_THR }, > + { 0x35, CMN_PLL1_SS_CTRL1 }, > + { 0x7f1e, CMN_PLL1_SS_CTRL2 }, > + { 0x20, CMN_PLL1_DSM_DIAG }, > + { 0, CMN_PLLSM1_USER_DEF_CTRL }, > + { 0, CMN_DIAG_PLL1_OVRD }, > + { 0, CMN_DIAG_PLL1_FBH_OVRD }, > + { 0, CMN_DIAG_PLL1_FBL_OVRD }, > + { 0x6, CMN_DIAG_PLL1_V2I_TUNE }, > + { 0x45, CMN_DIAG_PLL1_CP_TUNE }, > + { 0x8, CMN_DIAG_PLL1_LF_PROG }, > + { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 }, > + { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 }, > + { 0x4, CMN_DIAG_PLL1_INCLK_CTRL }, > +}; > + > +static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy) > +{ > + u32 i, rdata; > + > + /* > + * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent > + * cmn_psm_clk_dig_div = 2, set the clk division to 2 > + */ > + writel(0x830, tcphy->base + PMA_CMN_CTRL1); > + for (i = 0; i < 4; i++) { > + /* > + * The following PHY configuration assumes a 24 MHz reference > + * clock. > + */ > + writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i)); > + writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i)); > + writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i)); > + } > + > + rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL); > + rdata &= ~CLK_PLL_MASK; > + rdata |= CLK_PLL_CONFIG; > + writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL); > +} > + > +static void tcphy_cfg_usb_pll(struct rockchip_typec_phy *tcphy) > +{ > + u32 i; > + > + /* load the configuration of PLL0 */ > + for (i = 0; i < ARRAY_SIZE(usb_pll_cfg); i++) > + writel(usb_pll_cfg[i].value, tcphy->base + usb_pll_cfg[i].addr); > +} > + > +static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy) > +{ > + u32 i; > + > + /* set the default mode to RBR */ > + writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR, > + tcphy->base + DP_CLK_CTL); > + > + /* load the configuration of PLL1 */ > + for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++) > + writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr); > +} > + > +static void tcphy_tx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) > +{ > + writel(0x7799, tcphy->base + TX_PSC_A0(lane)); > + writel(0x7798, tcphy->base + TX_PSC_A1(lane)); > + writel(0x5098, tcphy->base + TX_PSC_A2(lane)); > + writel(0x5098, tcphy->base + TX_PSC_A3(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); > + writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); > +} > + > +static void tcphy_rx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) > +{ > + writel(0xa6fd, tcphy->base + RX_PSC_A0(lane)); > + writel(0xa6fd, tcphy->base + RX_PSC_A1(lane)); > + writel(0xa410, tcphy->base + RX_PSC_A2(lane)); > + writel(0x2410, tcphy->base + RX_PSC_A3(lane)); > + writel(0x23ff, tcphy->base + RX_PSC_CAL(lane)); > + writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane)); > + writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane)); > + writel(0x2010, tcphy->base + RX_PSC_RDY(lane)); > + writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); > +} > + > +static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) > +{ > + u16 rdata; > + > + writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane)); > + writel(0x6799, tcphy->base + TX_PSC_A0(lane)); > + writel(0x6798, tcphy->base + TX_PSC_A1(lane)); > + writel(0x98, tcphy->base + TX_PSC_A2(lane)); > + writel(0x98, tcphy->base + TX_PSC_A3(lane)); > + > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane)); > + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane)); > + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane)); > + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane)); > + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane)); > + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane)); > + > + writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane)); > + writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane)); > + > + rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); > + rdata = (rdata & 0x8fff) | 0x6000; > + writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); > +} > + > +static inline int property_enable(struct rockchip_typec_phy *tcphy, > + const struct usb3phy_reg *reg, bool en) > +{ > + u32 mask = 1 << reg->write_enable; > + u32 val = en << reg->enable_bit; > + > + return regmap_write(tcphy->grf_regs, reg->offset, val | mask); > +} > + > +static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) > +{ > + u16 rdata, rdata2, val; > + > + /* disable txda_cal_latch_en for rewrite the calibration values */ > + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); > + val = rdata & 0xdfff; > + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); > + > + /* > + * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and > + * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it > + * works. > + */ > + rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2); > + rdata = rdata & 0xffc0; > + > + rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL); > + rdata2 = rdata2 & 0x3f; > + > + val = rdata | rdata2; > + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); > + usleep_range(1000, 1050); > + > + /* > + * Enable signal for latch that sample and holds calibration values. > + * Activate this signal for 1 clock cycle to sample new calibration > + * values. > + */ > + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); > + val = rdata | 0x2000; > + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); > + usleep_range(150, 200); > + > + /* set TX Voltage Level and TX Deemphasis to 0 */ > + writel(0, tcphy->base + PHY_DP_TX_CTL); > + /* re-enable decap */ > + writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); > + writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); > + writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); > + writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); > + > + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); > + > + /* > + * Programs txda_drv_ldo_prog[15:0], Sets driver LDO > + * voltage 16'h1001 for DP-AUX-TX and RX > + */ > + writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); > + > + /* re-enables Bandgap reference for LDO */ > + writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); > + writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); > + > + /* > + * re-enables the transmitter pre-driver, driver data selection MUX, > + * and receiver detect circuits. > + */ > + writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2); > + writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); > + > + /* > + * BIT 12: Controls auxda_polarity, which selects the polarity of the > + * xcvr: > + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull > + * down aux_m) > + * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down > + * aux_p) > + */ > + val = 0xa078; > + if (!tcphy->flip) > + val |= BIT(12); > + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); > + > + writel(0, tcphy->base + TX_ANA_CTRL_REG_3); > + writel(0, tcphy->base + TX_ANA_CTRL_REG_4); > + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); > + > + /* > + * Controls low_power_swing_en, set the voltage swing of the driver > + * to 400mv. The values below are peak to peak (differential) values. > + */ > + writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL); > + writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); > + > + /* Controls tx_high_z_tm_en */ > + val = readl(tcphy->base + TX_DIG_CTRL_REG_2); > + val |= BIT(15); > + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); > +} > + > +static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) > +{ > + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; > + int ret, i; > + u32 val; > + > + ret = clk_prepare_enable(tcphy->clk_core); > + if (ret) { > + dev_err(tcphy->dev, "Failed to prepare_enable core clock\n"); > + return ret; > + } > + > + ret = clk_prepare_enable(tcphy->clk_ref); > + if (ret) { > + dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n"); > + goto err_clk_core; > + } > + > + reset_control_deassert(tcphy->tcphy_rst); > + > + property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); > + > + tcphy_cfg_24m(tcphy); > + > + if (mode == MODE_DFP_DP) { > + tcphy_cfg_dp_pll(tcphy); > + for (i = 0; i < 4; i++) > + tcphy_dp_cfg_lane(tcphy, i); > + > + writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG); > + } else { > + tcphy_cfg_usb_pll(tcphy); > + tcphy_cfg_dp_pll(tcphy); > + if (tcphy->flip) { > + tcphy_tx_usb_cfg_lane(tcphy, 3); > + tcphy_rx_usb_cfg_lane(tcphy, 2); > + tcphy_dp_cfg_lane(tcphy, 0); > + tcphy_dp_cfg_lane(tcphy, 1); > + } else { > + tcphy_tx_usb_cfg_lane(tcphy, 0); > + tcphy_rx_usb_cfg_lane(tcphy, 1); > + tcphy_dp_cfg_lane(tcphy, 2); > + tcphy_dp_cfg_lane(tcphy, 3); > + } > + > + writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG); > + } > + > + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); > + > + reset_control_deassert(tcphy->uphy_rst); > + > + ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1, > + val, val & CMN_READY, 10, > + PHY_MODE_SET_TIMEOUT); > + if (ret < 0) { > + dev_err(tcphy->dev, "wait pma ready timeout\n"); > + ret = -ETIMEDOUT; > + goto err_wait_pma; > + } > + > + reset_control_deassert(tcphy->pipe_rst); > + > + return 0; > + > +err_wait_pma: > + reset_control_assert(tcphy->uphy_rst); > + reset_control_assert(tcphy->tcphy_rst); > + clk_disable_unprepare(tcphy->clk_ref); > +err_clk_core: > + clk_disable_unprepare(tcphy->clk_core); > + return ret; > +} > + > +static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy) > +{ > + reset_control_assert(tcphy->tcphy_rst); > + reset_control_assert(tcphy->uphy_rst); > + reset_control_assert(tcphy->pipe_rst); > + clk_disable_unprepare(tcphy->clk_core); > + clk_disable_unprepare(tcphy->clk_ref); > +} > + > +static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) > +{ > + struct extcon_dev *edev = tcphy->extcon; > + union extcon_property_value property; > + unsigned int id; > + bool dfp, ufp, dp; > + u8 mode; > + int ret; > + > + ufp = extcon_get_state(edev, EXTCON_USB); > + dfp = extcon_get_state(edev, EXTCON_USB_HOST); > + dp = extcon_get_state(edev, EXTCON_DISP_DP); > + > + mode = MODE_DFP_USB; > + id = EXTCON_USB_HOST; > + > + if (ufp) { > + mode = MODE_UFP_USB; > + id = EXTCON_USB; > + } else if (dfp && dp) { > + mode = MODE_DFP_USB | MODE_DFP_DP; > + } else if (dp) { > + mode = MODE_DFP_DP; > + id = EXTCON_DISP_DP; > + } > + > + ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY, > + &property); > + if (ret) { > + dev_err(tcphy->dev, "get property failed\n"); > + return ret; > + } > + > + tcphy->flip = property.intval ? 1 : 0; > + > + return mode; > +} > + > +static int rockchip_usb3_phy_power_on(struct phy *phy) > +{ > + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); > + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; > + const struct usb3phy_reg *reg = &cfg->pipe_status; > + int timeout, ret = 0; > + u32 val; > + u8 new_mode; This will never be < 0 (sorry for not seeing this earlier) > + > + mutex_lock(&tcphy->lock); > + > + new_mode = tcphy_get_mode(tcphy); > + if (new_mode < 0) { Maybe compile with W=1 ? That might give you a warning here. > + ret = new_mode; > + goto unlock_ret; > + } > + > + if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) { > + ret = -ENODEV; > + goto unlock_ret; > + } > + > + if (tcphy->mode == new_mode) > + goto unlock_ret; > + > + if (tcphy->mode == MODE_DISCONNECT) > + tcphy_phy_init(tcphy, new_mode); > + > + /* wait TCPHY for pipe ready */ > + for (timeout = 0; timeout < 100; timeout++) { > + regmap_read(tcphy->grf_regs, reg->offset, &val); > + if (!(val & BIT(reg->enable_bit))) { > + tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB); > + goto unlock_ret; > + } > + usleep_range(10, 20); > + } > + > + if (tcphy->mode == MODE_DISCONNECT) > + tcphy_phy_deinit(tcphy); > + > + ret = -ETIMEDOUT; > + > +unlock_ret: > + mutex_unlock(&tcphy->lock); > + return ret; > +} > + > +static int rockchip_usb3_phy_power_off(struct phy *phy) > +{ > + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); > + > + if (tcphy->mode == MODE_DISCONNECT) > + goto unlock; > + > + mutex_lock(&tcphy->lock); > + Lock is too late. > + tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB); > + if (tcphy->mode == MODE_DISCONNECT) > + tcphy_phy_deinit(tcphy); > + > +unlock: > + mutex_unlock(&tcphy->lock); > + return 0; > +} > + > +static const struct phy_ops rockchip_usb3_phy_ops = { > + .power_on = rockchip_usb3_phy_power_on, > + .power_off = rockchip_usb3_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static int rockchip_dp_phy_power_on(struct phy *phy) > +{ > + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); > + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; > + u32 val; > + u8 new_mode; This can never be < 0. > + int ret = 0; > + > + mutex_lock(&tcphy->lock); > + > + new_mode = tcphy_get_mode(tcphy); > + if (new_mode < 0) { > + ret = new_mode; > + goto unlock_ret; > + } > + > + if (!(new_mode & (MODE_DFP_DP))) { Nitpick: Unnecessary ( ) around MODE_DFP_DP > + ret = -ENODEV; > + goto unlock_ret; > + } > + > + if (tcphy->mode == new_mode) > + goto unlock_ret; > + > + /* > + * If the PHY has been power on, but the mode is not DP only mode, > + * re-init the PHY for setting all of 4 lanes to DP. > + */ > + if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) { > + tcphy_phy_deinit(tcphy); > + tcphy_phy_init(tcphy, new_mode); > + } else if (tcphy->mode == MODE_DISCONNECT) { > + tcphy_phy_init(tcphy, new_mode); > + } > + > + property_enable(tcphy, &cfg->uphy_dp_sel, 1); > + > + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, > + val, val & DP_MODE_A2, 1000, > + PHY_MODE_SET_TIMEOUT); > + if (ret < 0) { > + dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n"); > + goto power_on_finish; > + } > + > + tcphy_dp_aux_calibration(tcphy); > + > + writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL); > + > + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, > + val, val & DP_MODE_A0, 1000, > + PHY_MODE_SET_TIMEOUT); > + if (ret < 0) { > + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); > + dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n"); > + goto power_on_finish; > + } > + > + regmap_write(tcphy->grf_regs, GRF_SOC_CON26, > + DPTX_HPD_SEL_MASK | DPTX_HPD_SEL); > + > + tcphy->mode |= MODE_DFP_DP; > + > +power_on_finish: > + if (tcphy->mode == MODE_DISCONNECT) > + tcphy_phy_deinit(tcphy); > +unlock_ret: > + mutex_unlock(&tcphy->lock); > + return ret; > +} > + > +static int rockchip_dp_phy_power_off(struct phy *phy) > +{ > + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); > + > + mutex_lock(&tcphy->lock); > + > + if (tcphy->mode == MODE_DISCONNECT) > + goto unlock; > + > + tcphy->mode &= ~MODE_DFP_DP; > + regmap_write(tcphy->grf_regs, GRF_SOC_CON26, > + DPTX_HPD_SEL_MASK | DPTX_HPD_DEL); > + > + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); > + > + if (tcphy->mode == MODE_DISCONNECT) > + tcphy_phy_deinit(tcphy); > + > +unlock: > + mutex_unlock(&tcphy->lock); > + return 0; > +} > + > +static const struct phy_ops rockchip_dp_phy_ops = { > + .power_on = rockchip_dp_phy_power_on, > + .power_off = rockchip_dp_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static int tcphy_get_param(struct device *dev, > + struct usb3phy_reg *reg, > + const char *name) > +{ > + u32 buffer[3]; > + int ret; > + > + ret = of_property_read_u32_array(dev->of_node, name, buffer, 3); > + if (ret) { > + dev_err(dev, "Can not parse %s\n", name); > + return ret; > + } > + > + reg->offset = buffer[0]; > + reg->enable_bit = buffer[1]; > + reg->write_enable = buffer[2]; > + return 0; > +} > + > +static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy, > + struct device *dev) > +{ > + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; > + int ret; > + > + ret = tcphy_get_param(dev, &cfg->typec_conn_dir, > + "rockchip,typec-conn-dir"); > + if (ret) > + return ret; > + > + ret = tcphy_get_param(dev, &cfg->usb3tousb2_en, > + "rockchip,usb3tousb2-en"); > + if (ret) > + return ret; > + > + ret = tcphy_get_param(dev, &cfg->external_psm, > + "rockchip,external-psm"); > + if (ret) > + return ret; > + > + ret = tcphy_get_param(dev, &cfg->pipe_status, > + "rockchip,pipe-status"); > + if (ret) > + return ret; > + > + ret = tcphy_get_param(dev, &cfg->uphy_dp_sel, > + "rockchip,uphy-dp-sel"); > + if (ret) > + return ret; > + > + tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node, > + "rockchip,grf"); > + if (IS_ERR(tcphy->grf_regs)) { > + dev_err(dev, "could not find grf dt node\n"); > + return PTR_ERR(tcphy->grf_regs); > + } > + > + tcphy->clk_core = devm_clk_get(dev, "tcpdcore"); > + if (IS_ERR(tcphy->clk_core)) { > + dev_err(dev, "could not get uphy core clock\n"); > + return PTR_ERR(tcphy->clk_core); > + } > + > + tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref"); > + if (IS_ERR(tcphy->clk_ref)) { > + dev_err(dev, "could not get uphy ref clock\n"); > + return PTR_ERR(tcphy->clk_ref); > + } > + > + tcphy->uphy_rst = devm_reset_control_get(dev, "uphy"); > + if (IS_ERR(tcphy->uphy_rst)) { > + dev_err(dev, "no uphy_rst reset control found\n"); > + return PTR_ERR(tcphy->uphy_rst); > + } > + > + tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe"); > + if (IS_ERR(tcphy->pipe_rst)) { > + dev_err(dev, "no pipe_rst reset control found\n"); > + return PTR_ERR(tcphy->pipe_rst); > + } > + > + tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy"); > + if (IS_ERR(tcphy->tcphy_rst)) { > + dev_err(dev, "no tcphy_rst reset control found\n"); > + return PTR_ERR(tcphy->tcphy_rst); > + } > + > + return 0; > +} > + > +static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy) > +{ > + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; > + > + reset_control_assert(tcphy->tcphy_rst); > + reset_control_assert(tcphy->uphy_rst); > + reset_control_assert(tcphy->pipe_rst); > + > + /* select external psm clock */ > + property_enable(tcphy, &cfg->external_psm, 1); > + property_enable(tcphy, &cfg->usb3tousb2_en, 0); > + > + tcphy->mode = MODE_DISCONNECT; > +} > + > +static struct phy *tcphy_phy_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct rockchip_typec_phy *tcphy = dev_get_drvdata(dev); > + int i; > + > + if (WARN_ON(args->args[0] >= 2)) > + return ERR_PTR(-ENODEV); > + > + for (i = 0; i < 2; i++) { > + if (i == args->args[0]) > + return tcphy->phy[i]; > + } > + > + return ERR_PTR(-ENODEV); > +} > + > +static int rockchip_typec_phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct rockchip_typec_phy *tcphy; > + struct phy_provider *phy_provider; > + struct resource *res; > + int ret; > + > + tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL); > + if (!tcphy) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + tcphy->base = devm_ioremap_resource(dev, res); > + if (IS_ERR(tcphy->base)) > + return PTR_ERR(tcphy->base); > + > + ret = tcphy_parse_dt(tcphy, dev); > + if (ret) > + return ret; > + > + tcphy->dev = dev; > + platform_set_drvdata(pdev, tcphy); > + mutex_init(&tcphy->lock); > + > + typec_phy_pre_init(tcphy); > + > + tcphy->extcon = extcon_get_edev_by_phandle(dev, 0); > + if (IS_ERR(tcphy->extcon)) { > + if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER) > + dev_err(dev, "Invalid or missing extcon\n"); > + return PTR_ERR(tcphy->extcon); > + } > + > + tcphy->phy[0] = devm_phy_create(dev, NULL, &rockchip_dp_phy_ops); > + if (IS_ERR(tcphy->phy[0])) { > + dev_err(dev, "failed to create DP phy\n"); > + return PTR_ERR(tcphy->phy[0]); > + } > + > + tcphy->phy[1] = devm_phy_create(dev, NULL, &rockchip_usb3_phy_ops); > + if (IS_ERR(tcphy->phy[1])) { > + dev_err(dev, "failed to create USB3 phy\n"); > + return PTR_ERR(tcphy->phy[1]); > + } > + > + phy_set_drvdata(tcphy->phy[0], tcphy); > + phy_set_drvdata(tcphy->phy[1], tcphy); > + > + phy_provider = devm_of_phy_provider_register(dev, tcphy_phy_xlate); > + if (IS_ERR(phy_provider)) { > + dev_err(dev, "Failed to register phy provider\n"); > + return PTR_ERR(phy_provider); > + } > + > + return 0; > +} > + > +static const struct of_device_id rockchip_typec_phy_dt_ids[] = { > + { .compatible = "rockchip,rk3399-typec-phy" }, > + {} > +}; > + > +MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids); > + > +static struct platform_driver rockchip_typec_phy_driver = { > + .probe = rockchip_typec_phy_probe, > + .driver = { > + .name = "rockchip-typec-phy", > + .of_match_table = rockchip_typec_phy_dt_ids, > + }, > +}; > + > +module_platform_driver(rockchip_typec_phy_driver); > + > +MODULE_AUTHOR("Chris Zhong "); > +MODULE_AUTHOR("Kever Yang "); > +MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.6.3 >