linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Romain Perier <romain.perier@gmail.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
	Daniel Palmer <daniel@0x0f.com>, Rob Herring <robh+dt@kernel.org>,
	linux-rtc@vger.kernel.org,
	devicetree <devicetree@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC
Date: Thu, 19 Aug 2021 18:55:22 +0200	[thread overview]
Message-ID: <CABgxDo+deU3J1JCCSFTscQP8sm=XeXKJ=cPf4u78o37f3XBqwA@mail.gmail.com> (raw)
In-Reply-To: <YQ2Pm7nrEFmdS6Ky@piout.net>

Hello,

Le ven. 6 août 2021 à 21:38, Alexandre Belloni
<alexandre.belloni@bootlin.com> a écrit :
>
> Hello,
>
> On 01/08/2021 18:09:20+0200, Romain Perier wrote:
> > +static int msc313_rtc_probe(struct platform_device *pdev)
> > +{
> > +     struct device *dev = &pdev->dev;
> > +     struct msc313_rtc *priv;
> > +     int ret;
> > +     int irq;
> > +     unsigned long rate;
> > +     u16 reg;
> > +
> > +     priv = devm_kzalloc(&pdev->dev, sizeof(struct msc313_rtc), GFP_KERNEL);
> > +     if (!priv)
> > +             return -ENOMEM;
> > +
> > +     priv->rtc_base = devm_platform_ioremap_resource(pdev, 0);
> > +     if (IS_ERR(priv->rtc_base))
> > +             return PTR_ERR(priv->rtc_base);
> > +
> > +     irq = platform_get_irq(pdev, 0);
> > +     if (irq < 0)
> > +             return -EINVAL;
> > +
> > +     priv->rtc_dev = devm_rtc_allocate_device(dev);
> > +     if (IS_ERR(priv->rtc_dev))
> > +             return PTR_ERR(priv->rtc_dev);
> > +
> > +     priv->rtc_dev->ops = &msc313_rtc_ops;
> > +     priv->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_0000;
>
> I'm pretty sure this doesn't fit in this RTC registers, you should
> probably leave range_min to 0 (i.e. not set it at all).

ack

>
> > +     priv->rtc_dev->range_max = U32_MAX - 1; /* 2106-02-07 06:28:14 */
>
> I guess this one should be U32_MAX

ack

> > +
> > +     ret = devm_request_irq(dev, irq, msc313_rtc_interrupt, IRQF_SHARED,
> > +                            dev_name(&pdev->dev), &pdev->dev);
> > +     if (ret) {
> > +             dev_err(dev, "Could not request IRQ\n");
> > +             return ret;
> > +     }
> > +
> > +     priv->clk = devm_clk_get(dev, NULL);
> > +     if (IS_ERR(priv->clk)) {
> > +             dev_err(dev, "No input reference clock\n");
> > +             return PTR_ERR(priv->clk);
> > +     }
> > +
> > +     ret = clk_prepare_enable(priv->clk);
> > +     if (ret) {
> > +             dev_err(dev, "Failed to enable the reference clock, %d\n", ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare, priv->clk);
> > +     if (ret)
> > +             return ret;
> > +
> > +     rate = clk_get_rate(priv->clk);
> > +     writew(rate & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_L);
> > +     writew((rate >> 16) & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_H);
> > +
> > +     reg = readw(priv->rtc_base + REG_RTC_CTRL);
> > +     reg |= CNT_EN_BIT;
> > +     writew(reg, priv->rtc_base + REG_RTC_CTRL);
> > +
>
> If on POR, CNT_EN_BIT is not set, then it would be nice to use that to
> know whether the RTC is properly set. You can then check CNT_EN_BIT in
> .read_time and return -EINVAL if it is not set. Then you can set the bit
> in .set_time. It is anyway useless to let the RTC running if it is not
> set.

Yeah, this is to be sure that the RTC is alive with a valid value
(which makes sense).
Ok I will fix everything in v3, then.

Romain

  reply	other threads:[~2021-08-19 16:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-01 16:09 [PATCH v2 0/3] Add RTC for MStar SoCs Romain Perier
2021-08-01 16:09 ` [PATCH v2 1/3] dt-bindings: rtc: Add Mstar MSC313e RTC devicetree bindings documentation Romain Perier
2021-08-06 21:37   ` Rob Herring
2021-08-19 16:24     ` Romain Perier
2021-08-01 16:09 ` [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC Romain Perier
2021-08-06 19:38   ` Alexandre Belloni
2021-08-19 16:55     ` Romain Perier [this message]
2021-08-01 16:09 ` [PATCH v2 3/3] ARM: dts: mstar: Add rtc device node Romain Perier
2021-08-02 10:39   ` Daniel Palmer
2021-08-19 16:22     ` Romain Perier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CABgxDo+deU3J1JCCSFTscQP8sm=XeXKJ=cPf4u78o37f3XBqwA@mail.gmail.com' \
    --to=romain.perier@gmail.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=daniel@0x0f.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v2 2/3] rtc: Add support for the MSTAR MSC313 RTC' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).