From: Matthias Brugger <matthias.bgg@gmail.com>
To: Howard Chen <ibanezchen@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
"moderated list:ARM/Mediatek SoC..."
<linux-arm-kernel@lists.infradead.org>,
"open list:OPEN FIRMWARE AND..." <devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 1/3] ARM: mediatek: Add basic support for mt6592
Date: Fri, 24 Oct 2014 15:48:41 +0200 [thread overview]
Message-ID: <CABuKBeL3i+tjx_AQg5N+e=2GWgLuBWbt-dY0-Rif6duKsM-X5Q@mail.gmail.com> (raw)
In-Reply-To: <1413775401-4501-1-git-send-email-ibanezchen@gmail.com>
2014-10-20 5:23 GMT+02:00 Howard Chen <ibanezchen@gmail.com>:
> * A dtsi for boards based on Mediatek MT6592 SoCs
> * Compatible string in arch/arm/mach-mediatek/mediatek.c
>
> Signed-off-by: Howard Chen <ibanezchen@gmail.com>
> ---
> arch/arm/boot/dts/mt6592.dtsi | 138 ++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-mediatek/mediatek.c | 1 +
> 2 files changed, 139 insertions(+)
> create mode 100644 arch/arm/boot/dts/mt6592.dtsi
>
> diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi
> new file mode 100644
> index 0000000..367ba8f
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt6592.dtsi
> @@ -0,0 +1,138 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: Howard Chen <ibanezchen@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt6592";
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + };
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + };
> + cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x2>;
> + };
> + cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x3>;
> + };
> + cpu@4 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x4>;
> + };
> + cpu@5 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x5>;
> + };
> + cpu@6 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x6>;
> + };
> + cpu@7 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x7>;
> + };
> + };
> +
> + system_clk: dummy13m {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + };
> +
> + rtc_clk: dummy32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> +
> + uart_clk: uart_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> +
> + timer: timer@10008000 {
> + compatible = "mediatek,mt6577-timer";
> + reg = <0x10008000 0x80>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&system_clk>, <&rtc_clk>;
> + clock-names = "system-clk", "rtc-clk";
> + };
> +
> + gic: interrupt-controller@10211000 {
> + compatible = "arm,cortex-a9-gic";
Should be arm,cortex-a7-gic, right?
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0x10211000 0x1000>,
> + <0x10212000 0x1000>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11002000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
I tried this on v3.18-rc1 but it does not boot for me. I think this
depends on different bootloader on the different platforms.
This is critical for me. Can you send me your intpol register values,
so that I can check with my values when booting the kernel?
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11003000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11004000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart3: serial@11005000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11005000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
> index f2acf07..88e4626 100644
> --- a/arch/arm/mach-mediatek/mediatek.c
> +++ b/arch/arm/mach-mediatek/mediatek.c
> @@ -19,6 +19,7 @@
>
> static const char * const mediatek_board_dt_compat[] = {
> "mediatek,mt6589",
> + "mediatek,mt6592",
> NULL,
> };
>
> --
> 1.9.1
>
--
motzblog.wordpress.com
prev parent reply other threads:[~2014-10-24 13:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-20 3:23 [PATCH v4 1/3] ARM: mediatek: Add basic support for mt6592 Howard Chen
2014-10-20 3:23 ` [PATCH v4 2/3] ARM: mediatek: add dts for mt6592-evb Howard Chen
2014-10-20 3:23 ` [PATCH v4 3/3] dt-bindings: add documentation for Mediatek SoC Howard Chen
2014-10-24 13:48 ` Matthias Brugger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CABuKBeL3i+tjx_AQg5N+e=2GWgLuBWbt-dY0-Rif6duKsM-X5Q@mail.gmail.com' \
--to=matthias.bgg@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ibanezchen@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).