From: Karol Herbst <kherbst@redhat.com>
To: Marc MERLIN <marc_nouveau@merlins.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>,
nouveau <nouveau@lists.freedesktop.org>,
LKML <linux-kernel@vger.kernel.org>,
Linux PCI <linux-pci@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>, Len Brown <lenb@kernel.org>,
Lyude Paul <lyude@redhat.com>, Ben Skeggs <bskeggs@redhat.com>
Subject: Re: [Nouveau] pcieport 0000:00:01.0: PME: Spurious native interrupt (nvidia with nouveau and thunderbolt on thinkpad P73)
Date: Tue, 8 Sep 2020 01:51:19 +0200 [thread overview]
Message-ID: <CACO55ttBXKWTbxERK-aHsYQe_4=eK_WVc2+ebmCbCJJcQpFZrQ@mail.gmail.com> (raw)
In-Reply-To: <20200907205825.GB20064@merlins.org>
On Mon, Sep 7, 2020 at 10:58 PM Marc MERLIN <marc_nouveau@merlins.org> wrote:
>
> On Mon, Sep 07, 2020 at 09:14:03PM +0200, Karol Herbst wrote:
> > > - changes in the nouveau driver. Mika told me the PCIe regression
> > > "pcieport 0000:00:01.0: PME: Spurious native interrupt!" is supposed
> > > to be fixed in 5.8, but I still get a 4mn hang or so during boot and
> > > with 5.8, removing the USB key, didn't help make the boot faster
> >
> > that's the root port the GPU is attached to, no? I saw that message on
> > the Thinkpad P1G2 when runtime resuming the Nvidia GPU, but it does
> > seem to come from the root port.
>
> Hi Karol, thanks for your answer.
>
> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 0d)
> 01:00.0 VGA compatible controller: NVIDIA Corporation TU104GLM [Quadro RTX 4000 Mobile / Max-Q] (rev a1)
>
> > Well, you'd also need it when attaching external displays.
>
> Indeed. I just don't need that on this laptop, but familiar with the not
> so seemless procedure to turn on both GPUs, and mirror the intel one into
> the nvidia one for external output.
>
> > > [ 11.262985] nvidia-gpu 0000:01:00.3: PME# enabled
> > > [ 11.303060] nvidia-gpu 0000:01:00.3: PME# disabled
> >
> > mhh, interesting. I heard some random comments that the Nvidia
> > USB-C/UCSI driver is a bit broken and can cause various issues. Mind
> > blacklisting i2c-nvidia-gpu and typec_nvidia (and verify they don't
> > get loaded) and see if that helps?
>
> Right, this one:
> 01:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU104 USB Type-C UCSI Controller (rev a1)
> Sure, I'll blacklist it. Ok, just did that, removed from initrd,
> rebooted, and it was no better.
>
> From initrd (before root gets mounted), I have this:
> nouveau 1961984 0
> mxm_wmi 16384 1 nouveau
> hwmon 32768 1 nouveau
> ttm 102400 1 nouveau
> wmi 32768 2 nouveau,mxm_wmi
>
> I still got a 2mn hang. and a nouveau probe error
> [ 189.124530] nouveau: probe of 0000:01:00.0 failed with error -12
>
>
> Here's what it looks like:
> [ 9.693230] hid: raw HID events driver (C) Jiri Kosina
> [ 9.694988] usbcore: registered new interface driver usbhid
> [ 9.694989] usbhid: USB HID core driver
> [ 9.696700] hid-generic 0003:1050:0200.0001: hiddev0,hidraw0: USB HID v1.00 Device [Yubico Yubico Gnubby (gnubby1)] on usb-0000:00:14.0-2/input0
> [ 9.784456] Console: switching to colour frame buffer device 240x67
> [ 9.816297] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
> [ 25.087400] thunderbolt 0000:06:00.0: saving config space at offset 0x0 (reading 0x15eb8086)
> [ 25.087414] thunderbolt 0000:06:00.0: saving config space at offset 0x4 (reading 0x100406)
> [ 25.087419] thunderbolt 0000:06:00.0: saving config space at offset 0x8 (reading 0x8800006)
> [ 25.087424] thunderbolt 0000:06:00.0: saving config space at offset 0xc (reading 0x20)
> [ 25.087430] thunderbolt 0000:06:00.0: saving config space at offset 0x10 (reading 0xcc100000)
> [ 25.087435] thunderbolt 0000:06:00.0: saving config space at offset 0x14 (reading 0xcc140000)
> [ 25.087440] thunderbolt 0000:06:00.0: saving config space at offset 0x18 (reading 0x0)
> [ 25.087445] thunderbolt 0000:06:00.0: saving config space at offset 0x1c (reading 0x0)
> [ 25.087450] thunderbolt 0000:06:00.0: saving config space at offset 0x20 (reading 0x0)
> [ 25.087455] thunderbolt 0000:06:00.0: saving config space at offset 0x24 (reading 0x0)
> [ 25.087460] thunderbolt 0000:06:00.0: saving config space at offset 0x28 (reading 0x0)
> [ 25.087466] thunderbolt 0000:06:00.0: saving config space at offset 0x2c (reading 0x229b17aa)
> [ 25.087471] thunderbolt 0000:06:00.0: saving config space at offset 0x30 (reading 0x0)
> [ 25.087476] thunderbolt 0000:06:00.0: saving config space at offset 0x34 (reading 0x80)
> [ 25.087481] thunderbolt 0000:06:00.0: saving config space at offset 0x38 (reading 0x0)
> [ 25.087486] thunderbolt 0000:06:00.0: saving config space at offset 0x3c (reading 0x1ff)
> [ 25.087571] thunderbolt 0000:06:00.0: PME# enabled
> [ 25.105353] pcieport 0000:05:00.0: saving config space at offset 0x0 (reading 0x15ea8086)
> [ 25.105364] pcieport 0000:05:00.0: saving config space at offset 0x4 (reading 0x100407)
> [ 25.105370] pcieport 0000:05:00.0: saving config space at offset 0x8 (reading 0x6040006)
> [ 25.105375] pcieport 0000:05:00.0: saving config space at offset 0xc (reading 0x10020)
> [ 25.105380] pcieport 0000:05:00.0: saving config space at offset 0x10 (reading 0x0)
> [ 25.105384] pcieport 0000:05:00.0: saving config space at offset 0x14 (reading 0x0)
> [ 25.105389] pcieport 0000:05:00.0: saving config space at offset 0x18 (reading 0x60605)
> [ 25.105394] pcieport 0000:05:00.0: saving config space at offset 0x1c (reading 0x1f1)
> [ 25.105399] pcieport 0000:05:00.0: saving config space at offset 0x20 (reading 0xcc10cc10)
> [ 25.105404] pcieport 0000:05:00.0: saving config space at offset 0x24 (reading 0x1fff1)
> [ 25.105409] pcieport 0000:05:00.0: saving config space at offset 0x28 (reading 0x0)
> [ 25.105413] pcieport 0000:05:00.0: saving config space at offset 0x2c (reading 0x0)
> [ 25.105418] pcieport 0000:05:00.0: saving config space at offset 0x30 (reading 0x0)
> [ 25.105423] pcieport 0000:05:00.0: saving config space at offset 0x34 (reading 0x80)
> [ 25.105428] pcieport 0000:05:00.0: saving config space at offset 0x38 (reading 0x0)
> [ 25.105432] pcieport 0000:05:00.0: saving config space at offset 0x3c (reading 0x201ff)
> [ 25.105517] pcieport 0000:05:00.0: PME# enabled
> [ 25.125367] pcieport 0000:04:00.0: saving config space at offset 0x0 (reading 0x15ea8086)
> [ 25.125378] pcieport 0000:04:00.0: saving config space at offset 0x4 (reading 0x100007)
> [ 25.125383] pcieport 0000:04:00.0: saving config space at offset 0x8 (reading 0x6040006)
> [ 25.125388] pcieport 0000:04:00.0: saving config space at offset 0xc (reading 0x10020)
> [ 25.125393] pcieport 0000:04:00.0: saving config space at offset 0x10 (reading 0x0)
> [ 25.125398] pcieport 0000:04:00.0: saving config space at offset 0x14 (reading 0x0)
> [ 25.125403] pcieport 0000:04:00.0: saving config space at offset 0x18 (reading 0x510504)
> [ 25.125407] pcieport 0000:04:00.0: saving config space at offset 0x1c (reading 0x5141)
> [ 25.125412] pcieport 0000:04:00.0: saving config space at offset 0x20 (reading 0xcc10b400)
> [ 25.125417] pcieport 0000:04:00.0: saving config space at offset 0x24 (reading 0x3ff10001)
> [ 25.125422] pcieport 0000:04:00.0: saving config space at offset 0x28 (reading 0x60)
> [ 25.125427] pcieport 0000:04:00.0: saving config space at offset 0x2c (reading 0x60)
> [ 25.125431] pcieport 0000:04:00.0: saving config space at offset 0x30 (reading 0x0)
> [ 25.125436] pcieport 0000:04:00.0: saving config space at offset 0x34 (reading 0x80)
> [ 25.125441] pcieport 0000:04:00.0: saving config space at offset 0x38 (reading 0x0)
> [ 25.125446] pcieport 0000:04:00.0: saving config space at offset 0x3c (reading 0x201ff)
> [ 25.125528] pcieport 0000:04:00.0: PME# enabled
> [ 25.145423] pcieport 0000:00:1c.0: saving config space at offset 0x0 (reading 0xa3388086)
> [ 25.145437] pcieport 0000:00:1c.0: saving config space at offset 0x4 (reading 0x100407)
> [ 25.145445] pcieport 0000:00:1c.0: saving config space at offset 0x8 (reading 0x60400f0)
> [ 25.145453] pcieport 0000:00:1c.0: saving config space at offset 0xc (reading 0x810000)
> [ 25.145460] pcieport 0000:00:1c.0: saving config space at offset 0x10 (reading 0x0)
> [ 25.145464] pcieport 0000:00:1c.0: saving config space at offset 0x14 (reading 0x0)
> [ 25.145469] pcieport 0000:00:1c.0: saving config space at offset 0x18 (reading 0x510400)
> [ 25.145476] pcieport 0000:00:1c.0: saving config space at offset 0x1c (reading 0x20006040)
> [ 25.145484] pcieport 0000:00:1c.0: saving config space at offset 0x20 (reading 0xcc10b400)
> [ 25.145488] pcieport 0000:00:1c.0: saving config space at offset 0x24 (reading 0x3ff10001)
> [ 25.145493] pcieport 0000:00:1c.0: saving config space at offset 0x28 (reading 0x60)
> [ 25.145497] pcieport 0000:00:1c.0: saving config space at offset 0x2c (reading 0x60)
> [ 25.145502] pcieport 0000:00:1c.0: saving config space at offset 0x30 (reading 0x0)
> [ 25.145506] pcieport 0000:00:1c.0: saving config space at offset 0x34 (reading 0x40)
> [ 25.145510] pcieport 0000:00:1c.0: saving config space at offset 0x38 (reading 0x0)
> [ 25.145515] pcieport 0000:00:1c.0: saving config space at offset 0x3c (reading 0x201ff)
> [ 25.145604] pcieport 0000:00:1c.0: PME# enabled
> [ 26.265697] pcieport 0000:00:1c.0: power state changed by ACPI to D3cold
> [ 45.468365] random: crng init done
> [ 105.032727] usb 1-2: USB disconnect, device number 2 <= I removed a usb key, didn't help
> [ 128.495144] async_tx: api initialized (async)
> [ 128.514820] device-mapper: uevent: version 1.0.3
> [ 128.518186] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
> [ 144.869445] e1000e 0000:00:1f.6 eth0: NIC Link is Down
> [ 172.851384] BTRFS: device label btrfs_pool4 devid 1 transid 78270 /dev/sdb4 scanned by btrfs (1293)
> [ 172.851648] BTRFS: device label btrfs_pool3 devid 1 transid 27410 /dev/sda5 scanned by btrfs (1293)
> [ 172.852030] BTRFS: device fsid de9694f8-9c0d-4e9d-bd12-57adc4381cd7 devid 1 transid 41 /dev/sda3 scanned by btrfs (1293)
> [ 172.852224] BTRFS: device fsid 23e1398d-e462-41aa-b85e-f574906ddc03 devid 1 transid 585 /dev/nvme0n1p4 scanned by btrfs (1293)
> [ 189.124291] nouveau 0000:01:00.0: disp ctor failed, -12
> [ 189.124530] nouveau: probe of 0000:01:00.0 failed with error -12
>
> The next boot looks similar:
> [ 25.161759] pcieport 0000:00:1c.0: PME# enabled
> [ 26.297810] pcieport 0000:00:1c.0: power state changed by ACPI to D3cold
> [ 128.427270] async_tx: api initialized (async)
> [ 128.446525] device-mapper: uevent: version 1.0.3
> [ 128.446691] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
> [ 128.458120] random: cryptsetup: uninitialized urandom read (4 bytes read)
> [ 138.507373] random: cryptsetup: uninitialized urandom read (4 bytes read)
> [ 144.793573] e1000e 0000:00:1f.6 eth0: NIC Link is Down
> [ 159.627780] random: crng init done
> [ 171.814064] process '/usr/bin/fstype' started with executable stack
> [ 181.949989] BTRFS: device label btrfs_boot devid 1 transid 394687 /dev/mapper/cryptroot scanned by btrfs (1063)
> [ 181.953437] BTRFS: device label btrfs_pool4 devid 1 transid 78270 /dev/sdb4 scanned by btrfs (1063)
> [ 181.956989] BTRFS: device label btrfs_pool3 devid 1 transid 27410 /dev/sda5 scanned by btrfs (1063)
> [ 181.960473] BTRFS: device fsid de9694f8-9c0d-4e9d-bd12-57adc4381cd7 devid 1 transid 41 /dev/sda3 scanned by btrfs (1063)
> [ 181.964097] BTRFS: device fsid 23e1398d-e462-41aa-b85e-f574906ddc03 devid 1 transid 585 /dev/nvme0n1p4 scanned by btrfs (1063)
> [ 188.733645] nouveau 0000:01:00.0: disp ctor failed, -12
> [ 188.740653] nouveau: probe of 0000:01:00.0 failed with error -12
oh, I somehow missed that "disp ctor failed" message. I think that
might explain why things are a bit hanging. From the top of my head I
am not sure if that's something known or something new. But just in
case I CCed Lyude and Ben. And I think booting with
nouveau.debug=disp=trace could already show something relevant.
> [ 188.901070] PM: Image not found (code -22)
>
> Does that help?
>
> Thanks,
> Marc
> --
> "A mouse is a device used to point at the xterm you want to type in" - A.S.R.
>
> Home page: http://marc.merlins.org/ | PGP 7F55D5F27AAF9D08
>
next prev parent reply other threads:[~2020-09-07 23:51 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-04 12:39 [PATCH v2 0/2] PCI: Add missing link delays Mika Westerberg
2019-10-04 12:39 ` [PATCH v2 1/2] PCI: Introduce pcie_wait_for_link_delay() Mika Westerberg
2020-08-08 20:22 ` Marc MERLIN
2020-08-08 20:23 ` Marc MERLIN
2020-08-09 16:31 ` Marc MERLIN
2020-09-06 18:18 ` pcieport 0000:00:01.0: PME: Spurious native interrupt (nvidia with nouveau and thunderbolt on thinkpad P73) Marc MERLIN
2020-09-06 18:26 ` Matthias Andree
2020-09-07 19:14 ` [Nouveau] " Karol Herbst
2020-09-07 20:58 ` Marc MERLIN
2020-09-07 23:51 ` Karol Herbst [this message]
2020-09-08 0:29 ` Marc MERLIN
2020-09-13 20:15 ` Marc MERLIN
[not found] ` <20200529180315.GA18804@merlins.org>
2020-12-26 11:12 ` 5.9.11 still hanging 2mn at each boot and looping on nvidia-gpu 0000:01:00.3: PME# enabled (Quadro RTX 4000 Mobile) Marc MERLIN
2020-12-27 18:28 ` [Nouveau] " Ilia Mirkin
2021-01-27 21:33 ` Bjorn Helgaas
2021-01-28 20:59 ` Bjorn Helgaas
2021-01-29 0:56 ` Marc MERLIN
2021-01-29 21:20 ` Bjorn Helgaas
2021-01-30 2:04 ` Marc MERLIN
2020-12-29 15:51 ` Marc MERLIN
2020-12-29 16:33 ` Ilia Mirkin
2019-10-04 12:39 ` [PATCH v2 2/2] PCI: Add missing link delays required by the PCIe spec Mika Westerberg
2019-10-26 14:19 ` Bjorn Helgaas
2019-10-28 11:28 ` Mika Westerberg
2019-10-28 13:42 ` Bjorn Helgaas
2019-10-28 18:06 ` Mika Westerberg
2019-10-28 20:16 ` Bjorn Helgaas
2019-10-29 11:15 ` Mika Westerberg
2019-10-29 20:27 ` Bjorn Helgaas
2019-10-30 11:15 ` Mika Westerberg
2019-10-31 22:31 ` Bjorn Helgaas
2019-11-01 11:19 ` Mika Westerberg
2019-11-05 0:00 ` Bjorn Helgaas
2019-11-05 9:54 ` Mika Westerberg
2019-11-05 12:58 ` Mika Westerberg
2019-11-05 20:01 ` Bjorn Helgaas
2019-11-06 13:31 ` Mika Westerberg
2019-11-05 15:00 ` Bjorn Helgaas
2019-11-05 15:28 ` Mika Westerberg
2019-11-05 16:10 ` Bjorn Helgaas
2019-11-06 13:29 ` Mika Westerberg
2019-10-29 20:54 ` Bjorn Helgaas
2019-10-30 11:33 ` Mika Westerberg
2019-10-04 12:57 ` [PATCH v2 0/2] PCI: Add missing link delays Matthias Andree
2019-10-04 13:06 ` Mika Westerberg
2019-10-05 7:34 ` Matthias Andree
2019-10-07 9:32 ` Mika Westerberg
2019-10-07 15:15 ` Matthias Andree
2019-10-08 9:05 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACO55ttBXKWTbxERK-aHsYQe_4=eK_WVc2+ebmCbCJJcQpFZrQ@mail.gmail.com' \
--to=kherbst@redhat.com \
--cc=bhelgaas@google.com \
--cc=bskeggs@redhat.com \
--cc=kai.heng.feng@canonical.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lyude@redhat.com \
--cc=marc_nouveau@merlins.org \
--cc=mika.westerberg@linux.intel.com \
--cc=nicholas.johnson-opensource@outlook.com.au \
--cc=nouveau@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).