* [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins
@ 2016-11-02 14:37 Andrew Jeffery
2016-11-02 14:37 ` [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6] Andrew Jeffery
` (5 more replies)
0 siblings, 6 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-02 14:37 UTC (permalink / raw)
To: Lee Jones, Linus Walleij
Cc: Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery
Hi all,
This is v2 of the series implementing the remainder of the pinmux tables for
the AST2400 and AST2500 SoCs. v1 of the series can be found here:
https://lkml.org/lkml/2016/9/27/309
The first patch, "pinctrl-aspeed-g5: Never set SCU90[6]", is another fix that
should be applied for 4.9. Please let me know if I should send such patches
separately, as the series otherwise targets 4.10.
v2 is based on 4.9-rc2 as requested in feedback on v1.
Cheers,
Andrew
Significant changes since v1:
* Fixes from v1 have been applied, so have been dropped for v2
* A new fix has appeared, "pinctrl-aspeed-g5: Never set SCU90[6]", as noted
above
* New bindings documents for the SoC Display and LPC Host Controllers, driven
by the patch "pinctrl: aspeed: Read and write bits in LPCHC and GFX
controllers"
* The v1 patch "pinctrl: aspeed: Enable capture of off-SCU pinmux state" has
been significantly reworked and is now titled "pinctrl: aspeed: Read and
write bits in LPCHC and GFX controllers"
Andrew Jeffery (6):
pinctrl-aspeed-g5: Never set SCU90[6]
mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC)
pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers
pinctrl: aspeed-g4: Add mux configuration for all pins
pinctrl: aspeed-g5: Add mux configuration for all pins
.../devicetree/bindings/mfd/aspeed-gfx.txt | 17 +
.../devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 86 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1115 +++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1514 +++++++++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 66 +-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 33 +-
7 files changed, 2760 insertions(+), 88 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
--
2.7.4
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6]
2016-11-02 14:37 [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins Andrew Jeffery
@ 2016-11-02 14:37 ` Andrew Jeffery
2016-11-03 22:59 ` Joel Stanley
2016-11-07 9:32 ` Linus Walleij
2016-11-02 14:37 ` [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) Andrew Jeffery
` (4 subsequent siblings)
5 siblings, 2 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-02 14:37 UTC (permalink / raw)
To: Lee Jones, Linus Walleij
Cc: Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery
If a pin depending on bit 6 in SCU90 is requested for GPIO, the export
will succeed but changes to the GPIO's value will not be accepted by the
hardware. This is because the pinmux driver has misconfigured the SCU by
writing 1 to the reserved bit.
The description of SCU90[6] from the datasheet is 'Reserved, must keep
at value ”0”'. The fix is to switch pinmux from the bit-flipping macro
to explicitly configuring the .enable and .disable values to zero.
The patch has been tested on an AST2500 EVB.
Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver)
Reported-by: Uma Yadlapati <yadlapat@us.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
This patch should be applied for 4.9.
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index c8c72e8259d3..87b46390b695 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -26,7 +26,7 @@
#define ASPEED_G5_NR_PINS 228
-#define COND1 SIG_DESC_BIT(SCU90, 6, 0)
+#define COND1 { SCU90, BIT(6), 0, 0 }
#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
#define B14 0
--
2.7.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
2016-11-02 14:37 [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins Andrew Jeffery
2016-11-02 14:37 ` [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6] Andrew Jeffery
@ 2016-11-02 14:37 ` Andrew Jeffery
2016-11-09 18:26 ` Rob Herring
2016-11-18 18:47 ` Lee Jones
2016-11-02 14:37 ` [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC) Andrew Jeffery
` (3 subsequent siblings)
5 siblings, 2 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-02 14:37 UTC (permalink / raw)
To: Lee Jones, Linus Walleij
Cc: Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery
The Aspeed SoC Display Controller is presented as a syscon device to
arbitrate access by display and pinmux drivers. Video pinmux
configuration on fifth generation SoCs depends on bits in both the
System Control Unit and the Display Controller.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
new file mode 100644
index 000000000000..aea5370efd97
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for Aspeed SoC Display Controller (GFX)
+
+The Aspeed SoC Display Controller primarily does as its name suggests, but also
+participates in pinmux requests on the g5 SoCs. It is therefore considered a
+syscon device.
+
+Required properties:
+- compatible: "aspeed,ast2500-gfx", "syscon"
+- reg: contains offset/length value of the GFX memory
+ region.
+
+Example:
+
+gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC)
2016-11-02 14:37 [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins Andrew Jeffery
2016-11-02 14:37 ` [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6] Andrew Jeffery
2016-11-02 14:37 ` [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) Andrew Jeffery
@ 2016-11-02 14:37 ` Andrew Jeffery
2016-11-03 23:06 ` Joel Stanley
2016-11-18 18:44 ` Lee Jones
2016-11-02 14:37 ` [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers Andrew Jeffery
` (2 subsequent siblings)
5 siblings, 2 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-02 14:37 UTC (permalink / raw)
To: Lee Jones, Linus Walleij
Cc: Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery
The Aspeed LPC Host Controller is presented as a syscon device to
arbitrate access by LPC and pinmux drivers. LPC pinmux configuration on
fifth generation SoCs depends on bits in both the System Control Unit
and the LPC Host Controller.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
new file mode 100644
index 000000000000..792651488c3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for the Aspeed LPC Host Controller (LPCHC)
+
+The LPCHC registers configure LPC behaviour between the BMC and the host
+system. The LPCHC also participates in pinmux requests on g5 SoCs and is
+therefore considered a syscon device.
+
+Required properties:
+- compatible: "aspeed,ast2500-lpchc", "syscon"
+- reg: contains offset/length value of the LPCHC memory
+ region.
+
+Example:
+
+lpchc: lpchc@1e7890a0 {
+ compatible = "aspeed,ast2500-lpchc", "syscon";
+ reg = <0x1e7890a0 0xc4>;
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers
2016-11-02 14:37 [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins Andrew Jeffery
` (2 preceding siblings ...)
2016-11-02 14:37 ` [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC) Andrew Jeffery
@ 2016-11-02 14:37 ` Andrew Jeffery
2016-11-03 23:24 ` Joel Stanley
2016-11-09 18:26 ` Rob Herring
2016-11-02 14:38 ` [PATCH v2 5/6] pinctrl: aspeed-g4: Add mux configuration for all pins Andrew Jeffery
2016-11-02 14:38 ` [PATCH v2 6/6] pinctrl: aspeed-g5: " Andrew Jeffery
5 siblings, 2 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-02 14:37 UTC (permalink / raw)
To: Lee Jones, Linus Walleij
Cc: Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery
The System Control Unit IP block in the Aspeed SoCs is typically where
the pinmux configuration is found, but not always. A number of pins
depend on state in one of LPC Host Control (LPCHC) or SoC Display
Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
means to adjust these as necessary.
We use syscon to cast a regmap over the GFX and LPCHCR blocks, which is
used as an arbitration layer between the relevant driver and the pinctrl
subsystem. The regmaps are then exposed to the SoC-specific pinctrl
drivers by phandles in the devicetree, and are selected during a mux
request by querying a new 'ip' member in struct aspeed_sig_desc.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Since v1:
The change is now proactive: instead of reporting that we need to flip bits in
controllers we can't access, the patch provides access via regmaps for the
relevant controllers. The implementation also splits out the IP block ID into
its own variable rather than packing the value into the upper bits of the reg
member of struct aspeed_sig_desc. This drives some churn in the diff, but I've
tried to minimise it.
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 50 +++++++++++++---
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +++---
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 39 ++++++++++---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 66 +++++++++++++---------
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++++++++---
5 files changed, 144 insertions(+), 61 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 2ad18c4ea55c..115b0cce6c1c 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -4,12 +4,19 @@ Aspeed Pin Controllers
The Aspeed SoCs vary in functionality inside a generation but have a common mux
device register layout.
-Required properties:
-- compatible : Should be any one of the following:
- "aspeed,ast2400-pinctrl"
- "aspeed,g4-pinctrl"
- "aspeed,ast2500-pinctrl"
- "aspeed,g5-pinctrl"
+Required properties for g4:
+- compatible : Should be any one of the following:
+ "aspeed,ast2400-pinctrl"
+ "aspeed,g4-pinctrl"
+
+Required properties for g5:
+- compatible : Should be any one of the following:
+ "aspeed,ast2500-pinctrl"
+ "aspeed,g5-pinctrl"
+
+- aspeed,external-nodes: A cell of phandles to external controller nodes:
+ 0: compatible with "aspeed,ast2500-gfx", "syscon"
+ 1: compatible with "aspeed,ast2500-lpchc", "syscon"
The pin controller node should be a child of a syscon node with the required
property:
@@ -47,7 +54,7 @@ RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
TIMER7 TIMER8 VGABIOSROM
-Examples:
+g4 Example:
syscon: scu@1e6e2000 {
compatible = "syscon", "simple-mfd";
@@ -63,5 +70,34 @@ syscon: scu@1e6e2000 {
};
};
+g5 Example:
+
+apb {
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ };
+
+ lpchc: lpchc@1e7890a0 {
+ compatible = "aspeed,ast2500-lpchc", "syscon";
+ reg = <0x1e7890a0 0xc4>;
+ };
+
+ syscon: scu@1e6e2000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g5-pinctrl";
+ aspeed,external-nodes = <&gfx, &lpchc>;
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+ };
+ };
+};
+
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices.
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index a21b071ff290..558bd102416c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -292,7 +292,7 @@ SSSF_PIN_DECL(U18, GPIOG7, FLWP, SIG_DESC_SET(SCU84, 7));
#define UART6_DESC SIG_DESC_SET(SCU90, 7)
#define ROM16_DESC SIG_DESC_SET(SCU90, 6)
#define FLASH_WIDE SIG_DESC_SET(HW_STRAP1, 4)
-#define BOOT_SRC_NOR { HW_STRAP1, GENMASK(1, 0), 0, 0 }
+#define BOOT_SRC_NOR { ASPEED_IP_SCU, HW_STRAP1, GENMASK(1, 0), 0, 0 }
#define A8 56
SIG_EXPR_DECL(ROMD8, ROM16, ROM16_DESC);
@@ -418,9 +418,9 @@ FUNC_GROUP_DECL(I2C8, G5, F3);
#define U1 88
SSSF_PIN_DECL(U1, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
-#define VPI18_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPI30_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI18_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPI30_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
#define T5 89
#define T5_DESC SIG_DESC_SET(SCU84, 17)
@@ -641,11 +641,11 @@ SSSF_PIN_DECL(Y22, GPIOR2, ROMCS3, SIG_DESC_SET(SCU88, 26));
#define U19 139
SSSF_PIN_DECL(U19, GPIOR3, ROMCS4, SIG_DESC_SET(SCU88, 27));
-#define VPOOFF0_DESC { SCU94, GENMASK(1, 0), 0, 0 }
-#define VPO12_DESC { SCU94, GENMASK(1, 0), 1, 0 }
-#define VPO24_DESC { SCU94, GENMASK(1, 0), 2, 0 }
-#define VPOOFF1_DESC { SCU94, GENMASK(1, 0), 3, 0 }
-#define VPO_OFF_12 { SCU94, 0x2, 0, 0 }
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO12_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPO24_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+#define VPO_OFF_12 { ASPEED_IP_SCU, SCU94, 0x2, 0, 0 }
#define VPO_24_OFF SIG_DESC_SET(SCU94, 1)
#define V21 140
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 87b46390b695..99c4fa9bf861 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -26,8 +27,8 @@
#define ASPEED_G5_NR_PINS 228
-#define COND1 { SCU90, BIT(6), 0, 0 }
-#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
+#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
+#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
@@ -186,9 +187,12 @@ MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
FUNC_GROUP_DECL(GPIE0, B20, C20);
-#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
-#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
-#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
#define C18 64
SIG_EXPR_DECL(SYSCS, SPI1DEBUG, COND1, SPI1DEBUG_DESC);
@@ -325,10 +329,11 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
-#define VPIOFF0_DESC { SCU90, GENMASK(5, 4), 0, 0 }
-#define VPIOFF1_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPIRSVD_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
+#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -848,10 +853,26 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
{
int i;
+ struct regmap **map;
+ struct device_node *node;
for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++)
aspeed_g5_pins[i].number = i;
+ map = &aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX];
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0);
+ *map = syscon_node_to_regmap(node);
+ of_node_put(node);
+ if (IS_ERR(*map))
+ return PTR_ERR(*map);
+
+ map = &aspeed_g5_pinctrl_data.maps[ASPEED_IP_LPCHC];
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1);
+ *map = syscon_node_to_regmap(node);
+ of_node_put(node);
+ if (IS_ERR(*map))
+ return PTR_ERR(*map);
+
return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc,
&aspeed_g5_pinctrl_data);
}
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 49aeba912531..23586aac7a5a 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -14,6 +14,12 @@
#include "../core.h"
#include "pinctrl-aspeed.h"
+static const char *const aspeed_pinmux_ips[] = {
+ [ASPEED_IP_SCU] = "SCU",
+ [ASPEED_IP_GFX] = "GFX",
+ [ASPEED_IP_LPCHC] = "LHCR",
+};
+
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -78,7 +84,8 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
static inline void aspeed_sig_desc_print_val(
const struct aspeed_sig_desc *desc, bool enable, u32 rv)
{
- pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
+ pr_debug("Want %s%X[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
+ aspeed_pinmux_ips[desc->ip], desc->reg,
desc->mask, enable ? desc->enable : desc->disable,
(rv & desc->mask) >> __ffs(desc->mask), rv);
}
@@ -88,7 +95,7 @@ static inline void aspeed_sig_desc_print_val(
*
* @desc: The signal descriptor of interest
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @regmap: The IP block's regmap instance
*
* @return True if the descriptor's bitfield is configured to the state
* selected by @enabled, false otherwise
@@ -119,7 +126,7 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
*
* @expr: An expression controlling the signal for a mux function on a pin
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @maps: The list of regmap instances
*
* @return True if the expression composed by @enabled evaluates true, false
* otherwise
@@ -136,15 +143,16 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
* either condition as required.
*/
static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
- bool enabled, struct regmap *map)
+ bool enabled, struct regmap * const *maps)
{
int i;
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
- if (!aspeed_sig_desc_eval(desc, enabled, map))
+ if (!aspeed_sig_desc_eval(desc, enabled, maps[desc->ip]))
return false;
+
}
return true;
@@ -158,12 +166,12 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
* configured
* @enable: true to enable an function's signal through a pin's signal
* expression, false to disable the function's signal
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
* @return true if the expression is configured as requested, false otherwise
*/
static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
- bool enable, struct regmap *map)
+ bool enable, struct regmap * const *maps)
{
int i;
@@ -171,6 +179,7 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
bool ret;
const struct aspeed_sig_desc *desc = &expr->descs[i];
u32 pattern = enable ? desc->enable : desc->disable;
+ u32 val = (pattern << __ffs(desc->mask));
/*
* Strap registers are configured in hardware or by early-boot
@@ -179,48 +188,49 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*/
- if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
+ if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
+ desc->ip == ASPEED_IP_SCU)
continue;
- ret = regmap_update_bits(map, desc->reg, desc->mask,
- pattern << __ffs(desc->mask)) == 0;
+ ret = regmap_update_bits(maps[desc->ip], desc->reg,
+ desc->mask, val) == 0;
if (!ret)
return ret;
}
- return aspeed_sig_expr_eval(expr, enable, map);
+ return aspeed_sig_expr_eval(expr, enable, maps);
}
static bool aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+ struct regmap * const *maps)
{
- if (aspeed_sig_expr_eval(expr, true, map))
+ if (aspeed_sig_expr_eval(expr, true, maps))
return true;
- return aspeed_sig_expr_set(expr, true, map);
+ return aspeed_sig_expr_set(expr, true, maps);
}
static bool aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+ struct regmap * const *maps)
{
- if (!aspeed_sig_expr_eval(expr, true, map))
+ if (!aspeed_sig_expr_eval(expr, true, maps))
return true;
- return aspeed_sig_expr_set(expr, false, map);
+ return aspeed_sig_expr_set(expr, false, maps);
}
/**
* Disable a signal on a pin by disabling all provided signal expressions.
*
* @exprs: The list of signal expressions (from a priority level on a pin)
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
* @return true if all expressions in the list are successfully disabled, false
* otherwise
*/
static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
- struct regmap *map)
+ struct regmap * const *maps)
{
bool disabled = true;
@@ -230,7 +240,7 @@ static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
while (*exprs) {
bool ret;
- ret = aspeed_sig_expr_disable(*exprs, map);
+ ret = aspeed_sig_expr_disable(*exprs, maps);
disabled = disabled && ret;
exprs++;
@@ -343,6 +353,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
const struct aspeed_sig_expr **funcs;
const struct aspeed_sig_expr ***prios;
+ pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
+
if (!pdesc)
return -EINVAL;
@@ -358,7 +370,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
if (expr)
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
+ if (!aspeed_disable_sig(funcs, pdata->maps))
return -EPERM;
prios++;
@@ -377,7 +389,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
return -ENXIO;
}
- if (!aspeed_sig_expr_enable(expr, pdata->map))
+ if (!aspeed_sig_expr_enable(expr, pdata->maps))
return -EPERM;
}
@@ -432,7 +444,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
if (aspeed_gpio_in_exprs(funcs))
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
+ if (!aspeed_disable_sig(funcs, pdata->maps))
return -EPERM;
prios++;
@@ -462,7 +474,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
* If GPIO is not the lowest priority signal type, assume there is only
* one expression defined to enable the GPIO function
*/
- if (!aspeed_sig_expr_enable(expr, pdata->map))
+ if (!aspeed_sig_expr_enable(expr, pdata->maps))
return -EPERM;
return 0;
@@ -481,10 +493,10 @@ int aspeed_pinctrl_probe(struct platform_device *pdev,
return -ENODEV;
}
- pdata->map = syscon_node_to_regmap(parent->of_node);
- if (IS_ERR(pdata->map)) {
+ pdata->maps[ASPEED_IP_SCU] = syscon_node_to_regmap(parent->of_node);
+ if (IS_ERR(pdata->maps[ASPEED_IP_SCU])) {
dev_err(&pdev->dev, "No regmap for syscon pincontroller parent\n");
- return PTR_ERR(pdata->map);
+ return PTR_ERR(pdata->maps[ASPEED_IP_SCU]);
}
pctl = pinctrl_register(pdesc, &pdev->dev, pdata);
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 3e72ef8c54bf..727728b86c07 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -232,6 +232,11 @@
* group.
*/
+#define ASPEED_IP_SCU 0
+#define ASPEED_IP_GFX 1
+#define ASPEED_IP_LPCHC 2
+#define ASPEED_NR_PINMUX_IPS 3
+
/*
* The "Multi-function Pins Mapping and Control" table in the SoC datasheet
* references registers by the device/offset mnemonic. The register macros
@@ -261,7 +266,9 @@
* A signal descriptor, which describes the register, bits and the
* enable/disable values that should be compared or written.
*
- * @reg: The register offset from base in bytes
+ * @ip: The IP block identifier, used as an index into the regmap array in
+ * struct aspeed_pinctrl_data
+ * @reg: The register offset with respect to the base address of the IP block
* @mask: The mask to apply to the register. The lowest set bit of the mask is
* used to derive the shift value.
* @enable: The value that enables the function. Value should be in the LSBs,
@@ -270,6 +277,7 @@
* LSBs, not at the position of the mask.
*/
struct aspeed_sig_desc {
+ unsigned int ip;
unsigned int reg;
u32 mask;
u32 enable;
@@ -313,24 +321,30 @@ struct aspeed_pin_desc {
/* Macro hell */
+#define SIG_DESC_IP_BIT(ip, reg, idx, val) \
+ { ip, reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+
/**
- * Short-hand macro for describing a configuration enabled by the state of one
- * bit. The disable value is derived.
+ * Short-hand macro for describing an SCU descriptor enabled by the state of
+ * one bit. The disable value is derived.
*
* @reg: The signal's associated register, offset from base
* @idx: The signal's bit index in the register
* @val: The value (0 or 1) that enables the function
*/
#define SIG_DESC_BIT(reg, idx, val) \
- { reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+ SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, val)
+
+#define SIG_DESC_IP_SET(ip, reg, idx) SIG_DESC_IP_BIT(ip, reg, idx, 1)
/**
- * A further short-hand macro describing a configuration enabled with a set bit.
+ * A further short-hand macro expanding to an SCU descriptor enabled by a set
+ * bit.
*
- * @reg: The configuration's associated register, offset from base
- * @idx: The configuration's bit index in the register
+ * @reg: The register, offset from base
+ * @idx: The bit index in the register
*/
-#define SIG_DESC_SET(reg, idx) SIG_DESC_BIT(reg, idx, 1)
+#define SIG_DESC_SET(reg, idx) SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, 1)
#define SIG_DESC_LIST_SYM(sig, func) sig_descs_ ## sig ## _ ## func
#define SIG_DESC_LIST_DECL(sig, func, ...) \
@@ -500,7 +514,7 @@ struct aspeed_pin_desc {
MS_PIN_DECL_(pin, SIG_EXPR_LIST_PTR(gpio))
struct aspeed_pinctrl_data {
- struct regmap *map;
+ struct regmap *maps[ASPEED_NR_PINMUX_IPS];
const struct pinctrl_pin_desc *pins;
const unsigned int npins;
--
2.7.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 5/6] pinctrl: aspeed-g4: Add mux configuration for all pins
2016-11-02 14:37 [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins Andrew Jeffery
` (3 preceding siblings ...)
2016-11-02 14:37 ` [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers Andrew Jeffery
@ 2016-11-02 14:38 ` Andrew Jeffery
2016-11-02 14:38 ` [PATCH v2 6/6] pinctrl: aspeed-g5: " Andrew Jeffery
5 siblings, 0 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-02 14:38 UTC (permalink / raw)
To: Lee Jones, Linus Walleij
Cc: Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery,
Timothy Pearson
The patch introducing the g4 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms. Now, update the bindings document
to reflect the complete functionality and implement the necessary pin
configuration tables in the driver.
Cc: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
No significant change since v1.
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 19 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1097 +++++++++++++++++++-
2 files changed, 1096 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 115b0cce6c1c..f5c427d11337 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -38,13 +38,18 @@ supported:
aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
-ACPI BMCINT DDCCLK DDCDAT FLACK FLBUSY FLWP GPID0 GPIE0 GPIE2 GPIE4 GPIE6 I2C10
-I2C11 I2C12 I2C13 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCSMI MDIO1
-MDIO2 NCTS1 NCTS3 NCTS4 NDCD1 NDCD3 NDCD4 NDSR1 NDSR3 NDTR1 NDTR3 NRI1 NRI3
-NRI4 NRTS1 NRTS3 PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RMII1 ROM16
-ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD3 RXD4 SD1 SGPMI SIOPBI SIOPBO TIMER3
-TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD3 TXD4 UART6 VGAHS VGAVS VPI18 VPI24 VPI30
-VPO12 VPO24
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
+GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
+I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
+MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
+NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
+PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
+ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
+SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
+TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS
+VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index 558bd102416c..09b668415c56 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -43,9 +43,18 @@
* Not all pins have their signals defined (yet).
*/
+#define D6 0
+SSSF_PIN_DECL(D6, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+
+#define B5 1
+SSSF_PIN_DECL(B5, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
#define A4 2
SSSF_PIN_DECL(A4, GPIOA2, TIMER3, SIG_DESC_SET(SCU80, 2));
+#define E6 3
+SSSF_PIN_DECL(E6, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
+
#define I2C9_DESC SIG_DESC_SET(SCU90, 22)
#define C5 4
@@ -80,6 +89,26 @@ MS_PIN_DECL(D5, GPIOA7, MDIO2, TIMER8);
FUNC_GROUP_DECL(TIMER8, D5);
FUNC_GROUP_DECL(MDIO2, A3, D5);
+#define J21 8
+SSSF_PIN_DECL(J21, GPIOB0, SALT1, SIG_DESC_SET(SCU80, 8));
+
+#define J20 9
+SSSF_PIN_DECL(J20, GPIOB1, SALT2, SIG_DESC_SET(SCU80, 9));
+
+#define H18 10
+SSSF_PIN_DECL(H18, GPIOB2, SALT3, SIG_DESC_SET(SCU80, 10));
+
+#define F18 11
+SSSF_PIN_DECL(F18, GPIOB3, SALT4, SIG_DESC_SET(SCU80, 11));
+
+#define E19 12
+SIG_EXPR_DECL(LPCRST, LPCRST, SIG_DESC_SET(SCU80, 12));
+SIG_EXPR_DECL(LPCRST, LPCRSTS, SIG_DESC_SET(HW_STRAP1, 14));
+SIG_EXPR_LIST_DECL_DUAL(LPCRST, LPCRST, LPCRSTS);
+SS_PIN_DECL(E19, GPIOB4, LPCRST);
+
+FUNC_GROUP_DECL(LPCRST, E19);
+
#define H19 13
#define H19_DESC SIG_DESC_SET(SCU80, 13)
SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H19_DESC);
@@ -92,6 +121,19 @@ FUNC_GROUP_DECL(LPCSMI, H19);
#define H20 14
SSSF_PIN_DECL(H20, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+#define E18 15
+SIG_EXPR_LIST_DECL_SINGLE(EXTRST, EXTRST,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_BIT(SCU90, 31, 0),
+ SIG_DESC_SET(SCU3C, 3));
+SIG_EXPR_LIST_DECL_SINGLE(SPICS1, SPICS1,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_SET(SCU90, 31));
+MS_PIN_DECL(E18, GPIOB7, EXTRST, SPICS1);
+
+FUNC_GROUP_DECL(EXTRST, E18);
+FUNC_GROUP_DECL(SPICS1, E18);
+
#define SD1_DESC SIG_DESC_SET(SCU90, 0)
#define I2C10_DESC SIG_DESC_SET(SCU90, 23)
@@ -170,6 +212,62 @@ MS_PIN_DECL(D16, GPIOD1, SD2CMD, GPID0OUT);
FUNC_GROUP_DECL(GPID0, A18, D16);
+#define GPID2_DESC SIG_DESC_SET(SCU8C, 9)
+
+#define B17 26
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT0, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2IN, GPID2, GPID);
+MS_PIN_DECL(B17, GPIOD2, SD2DAT0, GPID2IN);
+
+#define A17 27
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT1, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2OUT, GPID2, GPID);
+MS_PIN_DECL(A17, GPIOD3, SD2DAT1, GPID2OUT);
+
+FUNC_GROUP_DECL(GPID2, B17, A17);
+
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define C16 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(C16, GPIOD4, SD2DAT2, GPID4IN);
+
+#define B16 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(B16, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, C16, B16);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define A16 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(A16, GPIOD6, SD2CD, GPID6IN);
+
+#define E15 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(E15, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, A16, E15);
+FUNC_GROUP_DECL(SD2, A18, D16, B17, A17, C16, B16, A16, E15);
+FUNC_GROUP_DECL(GPID, A18, D16, B17, A17, C16, B16, A16, E15);
+
#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
@@ -266,6 +364,15 @@ MS_PIN_DECL(B19, GPIOF1, NDCD4, SIOPBI);
FUNC_GROUP_DECL(NDCD4, B19);
FUNC_GROUP_DECL(SIOPBI, B19);
+#define A20 42
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, SIG_DESC_SET(SCUA4, 12));
+SIG_EXPR_DECL(SIOPWRGD, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+MS_PIN_DECL(A20, GPIOF2, NDSR4, SIOPWRGD);
+FUNC_GROUP_DECL(NDSR4, A20);
+FUNC_GROUP_DECL(SIOPWRGD, A20);
+
#define D17 43
SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
SIG_EXPR_DECL(SIOPBO, SIOPBO, SIG_DESC_SET(SCUA4, 14));
@@ -275,7 +382,17 @@ MS_PIN_DECL(D17, GPIOF3, NRI4, SIOPBO);
FUNC_GROUP_DECL(NRI4, D17);
FUNC_GROUP_DECL(SIOPBO, D17);
-FUNC_GROUP_DECL(ACPI, B19, D17);
+#define B18 44
+SSSF_PIN_DECL(B18, GPIOF4, NDTR4, SIG_DESC_SET(SCU80, 28));
+
+#define A19 45
+SIG_EXPR_LIST_DECL_SINGLE(NDTS4, NDTS4, SIG_DESC_SET(SCU80, 29));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, SIG_DESC_SET(SCUA4, 15));
+SIG_EXPR_DECL(SIOSCI, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+MS_PIN_DECL(A19, GPIOF5, NDTS4, SIOSCI);
+FUNC_GROUP_DECL(NDTS4, A19);
+FUNC_GROUP_DECL(SIOSCI, A19);
#define E16 46
SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
@@ -283,6 +400,34 @@ SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
#define C17 47
SSSF_PIN_DECL(C17, GPIOF7, RXD4, SIG_DESC_SET(SCU80, 31));
+#define A14 48
+SSSF_PIN_DECL(A14, GPIOG0, SGPSCK, SIG_DESC_SET(SCU84, 0));
+
+#define E13 49
+SSSF_PIN_DECL(E13, GPIOG1, SGPSLD, SIG_DESC_SET(SCU84, 1));
+
+#define D13 50
+SSSF_PIN_DECL(D13, GPIOG2, SGPSI0, SIG_DESC_SET(SCU84, 2));
+
+#define C13 51
+SSSF_PIN_DECL(C13, GPIOG3, SGPSI1, SIG_DESC_SET(SCU84, 3));
+
+#define B13 52
+SIG_EXPR_LIST_DECL_SINGLE(OSCCLK, OSCCLK, SIG_DESC_SET(SCU2C, 1));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(B13, GPIOG4, OSCCLK, WDTRST1);
+
+FUNC_GROUP_DECL(OSCCLK, B13);
+FUNC_GROUP_DECL(WDTRST1, B13);
+
+#define Y21 53
+SIG_EXPR_LIST_DECL_SINGLE(USBCKI, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(Y21, GPIOG5, USBCKI, WDTRST2);
+
+FUNC_GROUP_DECL(USBCKI, Y21);
+FUNC_GROUP_DECL(WDTRST2, Y21);
+
#define AA22 54
SSSF_PIN_DECL(AA22, GPIOG6, FLBUSY, SIG_DESC_SET(SCU84, 6));
@@ -352,6 +497,93 @@ MS_PIN_DECL(E7, GPIOH7, ROMD15, RXD6);
FUNC_GROUP_DECL(UART6, A8, C7, B7, A7, D7, B6, A6, E7);
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
+
+#define C22 64
+SIG_EXPR_DECL(SYSCS, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCS, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCS, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C22, GPIOI0, SYSCS);
+
+#define G18 65
+SIG_EXPR_DECL(SYSCK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCK, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(G18, GPIOI1, SYSCK);
+
+#define D19 66
+SIG_EXPR_DECL(SYSDO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDO, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(D19, GPIOI2, SYSDO);
+
+#define C20 67
+SIG_EXPR_DECL(SYSDI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDI, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C20, GPIOI3, SYSDI);
+
+#define VB_DESC SIG_DESC_SET(HW_STRAP1, 5)
+
+#define B22 68
+SIG_EXPR_DECL(SPI1CS0, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CS0, SIG_EXPR_PTR(SPI1CS0, SPI1),
+ SIG_EXPR_PTR(SPI1CS0, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CS0, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCS, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(B22, GPIOI4, SPI1CS0, VBCS);
+
+#define G19 69
+SIG_EXPR_DECL(SPI1CK, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CK, SIG_EXPR_PTR(SPI1CK, SPI1),
+ SIG_EXPR_PTR(SPI1CK, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CK, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCK, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(G19, GPIOI5, SPI1CK, VBCK);
+
+#define C18 70
+SIG_EXPR_DECL(SPI1DO, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DO, SIG_EXPR_PTR(SPI1DO, SPI1),
+ SIG_EXPR_PTR(SPI1DO, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DO, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDO, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(C18, GPIOI6, SPI1DO, VBDO);
+
+#define E20 71
+SIG_EXPR_DECL(SPI1DI, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DI, SIG_EXPR_PTR(SPI1DI, SPI1),
+ SIG_EXPR_PTR(SPI1DI, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DI, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDI, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(E20, GPIOI7, SPI1DI, VBDI);
+
+FUNC_GROUP_DECL(SPI1, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1DEBUG, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1PASSTHRU, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(VGABIOS_ROM, B22, G19, C18, E20);
+
+#define J5 72
+SSSF_PIN_DECL(J5, GPIOJ0, SGPMCK, SIG_DESC_SET(SCU84, 8));
+
+#define J4 73
+SSSF_PIN_DECL(J4, GPIOJ1, SGPMLD, SIG_DESC_SET(SCU84, 9));
+
+#define K5 74
+SSSF_PIN_DECL(K5, GPIOJ2, SGPMO, SIG_DESC_SET(SCU84, 10));
+
#define J3 75
SSSF_PIN_DECL(J3, GPIOJ3, SGPMI, SIG_DESC_SET(SCU84, 11));
@@ -496,6 +728,102 @@ SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, U5_DESC);
MS_PIN_DECL(U5, GPIOL7, VPIB1, RXD1);
FUNC_GROUP_DECL(RXD1, U5);
+#define V3 96
+#define V3_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_DECL(VPIOB2, VPI18, VPI18_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI24, VPI24_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI30, VPI30_DESC, V3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB2, SIG_EXPR_PTR(VPIOB2, VPI18),
+ SIG_EXPR_PTR(VPIOB2, VPI24),
+ SIG_EXPR_PTR(VPIOB2, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, V3_DESC);
+MS_PIN_DECL(V3, GPIOM0, VPIOB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, V3);
+
+#define W2 97
+#define W2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_DECL(VPIOB3, VPI18, VPI18_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI24, VPI24_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI30, VPI30_DESC, W2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB3, SIG_EXPR_PTR(VPIOB3, VPI18),
+ SIG_EXPR_PTR(VPIOB3, VPI24),
+ SIG_EXPR_PTR(VPIOB3, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, W2_DESC);
+MS_PIN_DECL(W2, GPIOM1, VPIOB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, W2);
+
+#define Y1 98
+#define Y1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_DECL(VPIOB4, VPI18, VPI18_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI24, VPI24_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI30, VPI30_DESC, Y1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB4, SIG_EXPR_PTR(VPIOB4, VPI18),
+ SIG_EXPR_PTR(VPIOB4, VPI24),
+ SIG_EXPR_PTR(VPIOB4, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, Y1_DESC);
+MS_PIN_DECL(Y1, GPIOM2, VPIOB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, Y1);
+
+#define V4 99
+#define V4_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_DECL(VPIOB5, VPI18, VPI18_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI24, VPI24_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI30, VPI30_DESC, V4_DESC);
+SIG_EXPR_LIST_DECL(VPIOB5, SIG_EXPR_PTR(VPIOB5, VPI18),
+ SIG_EXPR_PTR(VPIOB5, VPI24),
+ SIG_EXPR_PTR(VPIOB5, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, V4_DESC);
+MS_PIN_DECL(V4, GPIOM3, VPIOB5, NRI2);
+FUNC_GROUP_DECL(NRI2, V4);
+
+#define W3 100
+#define W3_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_DECL(VPIOB6, VPI18, VPI18_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI24, VPI24_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI30, VPI30_DESC, W3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB6, SIG_EXPR_PTR(VPIOB6, VPI18),
+ SIG_EXPR_PTR(VPIOB6, VPI24),
+ SIG_EXPR_PTR(VPIOB6, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, W3_DESC);
+MS_PIN_DECL(W3, GPIOM4, VPIOB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, W3);
+
+#define Y2 101
+#define Y2_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_DECL(VPIOB7, VPI18, VPI18_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI24, VPI24_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI30, VPI30_DESC, Y2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB7, SIG_EXPR_PTR(VPIOB7, VPI18),
+ SIG_EXPR_PTR(VPIOB7, VPI24),
+ SIG_EXPR_PTR(VPIOB7, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, Y2_DESC);
+MS_PIN_DECL(Y2, GPIOM5, VPIOB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, Y2);
+
+#define AA1 102
+#define AA1_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_DECL(VPIOB8, VPI18, VPI18_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI24, VPI24_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI30, VPI30_DESC, AA1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB8, SIG_EXPR_PTR(VPIOB8, VPI18),
+ SIG_EXPR_PTR(VPIOB8, VPI24),
+ SIG_EXPR_PTR(VPIOB8, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, AA1_DESC);
+MS_PIN_DECL(AA1, GPIOM6, VPIOB8, TXD2);
+FUNC_GROUP_DECL(TXD2, AA1);
+
+#define V5 103
+#define V5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_DECL(VPIOB9, VPI18, VPI18_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI24, VPI24_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI30, VPI30_DESC, V5_DESC);
+SIG_EXPR_LIST_DECL(VPIOB9, SIG_EXPR_PTR(VPIOB9, VPI18),
+ SIG_EXPR_PTR(VPIOB9, VPI24),
+ SIG_EXPR_PTR(VPIOB9, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, V5_DESC);
+MS_PIN_DECL(V5, GPIOM7, VPIOB9, RXD2);
+FUNC_GROUP_DECL(RXD2, V5);
+
#define W4 104
#define W4_DESC SIG_DESC_SET(SCU88, 0)
SIG_EXPR_LIST_DECL_SINGLE(VPIG0, VPI30, VPI30_DESC, W4_DESC);
@@ -580,10 +908,57 @@ SS_PIN_DECL(V6, GPIOO0, VPIG8);
SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9));
SS_PIN_DECL(Y5, GPIOO1, VPIG9);
-FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2);
-FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2, V6, Y5);
-FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, W4, Y3, AA22, W5, Y4, AA3,
- AB2);
+#define AA4 114
+SIG_EXPR_LIST_DECL_SINGLE(VPIR0, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(AA4, GPIOO2, VPIR0);
+
+#define AB3 115
+SIG_EXPR_LIST_DECL_SINGLE(VPIR1, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB3, GPIOO3, VPIR1);
+
+#define W6 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12));
+SS_PIN_DECL(W6, GPIOO4, VPIR2);
+
+#define AA5 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13));
+SS_PIN_DECL(AA5, GPIOO5, VPIR3);
+
+#define AB4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14));
+SS_PIN_DECL(AB4, GPIOO6, VPIR4);
+
+#define V7 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15));
+SS_PIN_DECL(V7, GPIOO7, VPIR5);
+
+#define Y6 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16));
+SS_PIN_DECL(Y6, GPIOP0, VPIR6);
+
+#define AB5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17));
+SS_PIN_DECL(AB5, GPIOP1, VPIR7);
+
+#define W7 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18));
+SS_PIN_DECL(W7, GPIOP2, VPIR8);
+
+#define AA6 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19));
+SS_PIN_DECL(AA6, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2);
+FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2, V6, Y5, W6, AA5, AB4, V7, Y6, AB5, W7,
+ AA6);
+FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, V3, W2, Y1, V4, W3, Y2, AA1,
+ V5, W4, Y3, AA22, W5, Y4, AA3, AB2, AA4, AB3);
+
+#define AB6 124
+SIG_EXPR_LIST_DECL_SINGLE(GPIOP4, GPIOP4);
+MS_PIN_DECL_(AB6, SIG_EXPR_LIST_PTR(GPIOP4));
#define Y7 125
SIG_EXPR_LIST_DECL_SINGLE(GPIOP5, GPIOP5);
@@ -619,6 +994,18 @@ SS_PIN_DECL(F5, GPIOQ3, SDA4);
FUNC_GROUP_DECL(I2C4, B1, F5);
+#define I2C14_DESC SIG_DESC_SET(SCU90, 27)
+
+#define H4 132
+SIG_EXPR_LIST_DECL_SINGLE(SCL14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H4, GPIOQ4, SCL14);
+
+#define H3 133
+SIG_EXPR_LIST_DECL_SINGLE(SDA14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H3, GPIOQ5, SDA14);
+
+FUNC_GROUP_DECL(I2C14, H4, H3);
+
#define DASH9028_DESC SIG_DESC_SET(SCU90, 28)
#define H2 134
@@ -776,13 +1163,6 @@ SIG_EXPR_LIST_DECL(ROMA23, SIG_EXPR_PTR(ROMA23, ROM8),
SIG_EXPR_LIST_DECL_SINGLE(VPOR5, VPO24, K18_DESC, VPO_24_OFF);
MS_PIN_DECL(K18, GPIOS7, ROMA23, VPOR5);
-FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
- U19);
-FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
- A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19);
-FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20);
-FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22);
-
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
#define A12 152
@@ -827,6 +1207,50 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1TXD3, RGMII1);
MS_PIN_DECL_(A13, SIG_EXPR_LIST_PTR(GPIOT5), SIG_EXPR_LIST_PTR(DASHA13),
SIG_EXPR_LIST_PTR(RGMII1TXD3));
+#define RMII2_DESC SIG_DESC_BIT(HW_STRAP1, 7, 0)
+
+#define D9 158
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT6, GPIOT6, SIG_DESC_SET(SCUA0, 6));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXEN, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCK, RGMII2);
+MS_PIN_DECL_(D9, SIG_EXPR_LIST_PTR(GPIOT6), SIG_EXPR_LIST_PTR(RMII2TXEN),
+ SIG_EXPR_LIST_PTR(RGMII2TXCK));
+
+#define E9 159
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT7, GPIOT7, SIG_DESC_SET(SCUA0, 7));
+SIG_EXPR_LIST_DECL_SINGLE(DASHE9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCTL, RGMII2);
+MS_PIN_DECL_(E9, SIG_EXPR_LIST_PTR(GPIOT7), SIG_EXPR_LIST_PTR(DASHE9),
+ SIG_EXPR_LIST_PTR(RGMII2TXCTL));
+
+#define A10 160
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU0, GPIOU0, SIG_DESC_SET(SCUA0, 8));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD0, RGMII2);
+MS_PIN_DECL_(A10, SIG_EXPR_LIST_PTR(GPIOU0), SIG_EXPR_LIST_PTR(RMII2TXD0),
+ SIG_EXPR_LIST_PTR(RGMII2TXD0));
+
+#define B10 161
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU1, GPIOU1, SIG_DESC_SET(SCUA0, 9));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD1, RGMII2);
+MS_PIN_DECL_(B10, SIG_EXPR_LIST_PTR(GPIOU1), SIG_EXPR_LIST_PTR(RMII2TXD1),
+ SIG_EXPR_LIST_PTR(RGMII2TXD1));
+
+#define C10 162
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU2, GPIOU2, SIG_DESC_SET(SCUA0, 10));
+SIG_EXPR_LIST_DECL_SINGLE(DASHC10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD2, RGMII2);
+MS_PIN_DECL_(C10, SIG_EXPR_LIST_PTR(GPIOU2), SIG_EXPR_LIST_PTR(DASHC10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD2));
+
+#define D10 163
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU3, GPIOU3, SIG_DESC_SET(SCUA0, 11));
+SIG_EXPR_LIST_DECL_SINGLE(DASHD10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD3, RGMII2);
+MS_PIN_DECL_(D10, SIG_EXPR_LIST_PTR(GPIOU3), SIG_EXPR_LIST_PTR(DASHD10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD3));
+
#define E11 164
SIG_EXPR_LIST_DECL_SINGLE(GPIOU4, GPIOU4, SIG_DESC_SET(SCUA0, 12));
SIG_EXPR_LIST_DECL_SINGLE(RMII1RCLK, RMII1, RMII1_DESC);
@@ -869,11 +1293,419 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1RXD3, RGMII1);
MS_PIN_DECL_(E10, SIG_EXPR_LIST_PTR(GPIOV1), SIG_EXPR_LIST_PTR(RMII1RXER),
SIG_EXPR_LIST_PTR(RGMII1RXD3));
+#define C9 170
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV2, GPIOV2, SIG_DESC_SET(SCUA0, 18));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RCLK, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCK, RGMII2);
+MS_PIN_DECL_(C9, SIG_EXPR_LIST_PTR(GPIOV2), SIG_EXPR_LIST_PTR(RMII2RCLK),
+ SIG_EXPR_LIST_PTR(RGMII2RXCK));
+
+#define B9 171
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV3, GPIOV3, SIG_DESC_SET(SCUA0, 19));
+SIG_EXPR_LIST_DECL_SINGLE(DASHB9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCTL, RGMII2);
+MS_PIN_DECL_(B9, SIG_EXPR_LIST_PTR(GPIOV3), SIG_EXPR_LIST_PTR(DASHB9),
+ SIG_EXPR_LIST_PTR(RGMII2RXCTL));
+
+#define A9 172
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV4, GPIOV4, SIG_DESC_SET(SCUA0, 20));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD0, RGMII2);
+MS_PIN_DECL_(A9, SIG_EXPR_LIST_PTR(GPIOV4), SIG_EXPR_LIST_PTR(RMII2RXD0),
+ SIG_EXPR_LIST_PTR(RGMII2RXD0));
+
+#define E8 173
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV5, GPIOV5, SIG_DESC_SET(SCUA0, 21));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD1, RGMII2);
+MS_PIN_DECL_(E8, SIG_EXPR_LIST_PTR(GPIOV5), SIG_EXPR_LIST_PTR(RMII2RXD1),
+ SIG_EXPR_LIST_PTR(RGMII2RXD1));
+
+#define D8 174
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV6, GPIOV6, SIG_DESC_SET(SCUA0, 22));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2CRSDV, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD2, RGMII2);
+MS_PIN_DECL_(D8, SIG_EXPR_LIST_PTR(GPIOV6), SIG_EXPR_LIST_PTR(RMII2CRSDV),
+ SIG_EXPR_LIST_PTR(RGMII2RXD2));
+
+#define C8 175
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV7, GPIOV7, SIG_DESC_SET(SCUA0, 23));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXER, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD3, RGMII2);
+MS_PIN_DECL_(C8, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
+ SIG_EXPR_LIST_PTR(RGMII2RXD3));
+
FUNC_GROUP_DECL(RMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
+FUNC_GROUP_DECL(RMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+FUNC_GROUP_DECL(RGMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+
+#define L5 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(L5, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, L5);
+
+#define L4 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(L4, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, L4);
+
+#define L3 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(L3, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, L3);
+
+#define L2 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(L2, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, L2);
+
+#define L1 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(L1, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, L1);
+
+#define M5 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(M5, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, M5);
+
+#define M4 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(M4, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, M4);
+
+#define M3 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(M3, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, M3);
+
+#define M2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(M2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, M2);
+
+#define M1 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(M1, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, M1);
+
+#define N5 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(N5, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, N5);
+
+#define N4 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(N4, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, N4);
+
+#define N3 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(N3, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, N3);
+
+#define N2 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(N2, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, N2);
+
+#define N1 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(N1, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, N1);
+
+#define P5 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(P5, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, P5);
+
+#define C21 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SS_PIN_DECL(C21, GPIOY0, SIOS3);
+FUNC_GROUP_DECL(SIOS3, C21);
+
+#define F20 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SS_PIN_DECL(F20, GPIOY1, SIOS5);
+FUNC_GROUP_DECL(SIOS5, F20);
+
+#define G20 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SS_PIN_DECL(G20, GPIOY2, SIOPWREQ);
+FUNC_GROUP_DECL(SIOPWREQ, G20);
+
+#define K20 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SS_PIN_DECL(K20, GPIOY3, SIOONCTRL);
+FUNC_GROUP_DECL(SIOONCTRL, K20);
+
+FUNC_GROUP_DECL(ACPI, B19, A20, D17, A19, C21, F20, G20, K20);
+
+#define R22 200
+#define R22_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(ROMA2, ROM8, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA2, ROM16, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA2, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB0, VPO12, R22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB0, VPO24, R22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB0, VPOOFF1, R22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB0, SIG_EXPR_PTR(VPOB0, VPO12),
+ SIG_EXPR_PTR(VPOB0, VPO24), SIG_EXPR_PTR(VPOB0, VPOOFF1));
+MS_PIN_DECL(R22, GPIOZ0, ROMA2, VPOB0);
+
+#define P18 201
+#define P18_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(ROMA3, ROM8, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA3, ROM16, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA3, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB1, VPO12, P18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB1, VPO24, P18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB1, VPOOFF1, P18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB1, SIG_EXPR_PTR(VPOB1, VPO12),
+ SIG_EXPR_PTR(VPOB1, VPO24), SIG_EXPR_PTR(VPOB1, VPOOFF1));
+MS_PIN_DECL(P18, GPIOZ1, ROMA3, VPOB1);
+
+#define P19 202
+#define P19_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(ROMA4, ROM8, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA4, ROM16, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA4, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB2, VPO12, P19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB2, VPO24, P19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, P19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO12),
+ SIG_EXPR_PTR(VPOB2, VPO24), SIG_EXPR_PTR(VPOB2, VPOOFF1));
+MS_PIN_DECL(P19, GPIOZ2, ROMA4, VPOB2);
+
+#define P20 203
+#define P20_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(ROMA5, ROM8, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA5, ROM16, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA5, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB3, VPO12, P20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB3, VPO24, P20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, P20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO12),
+ SIG_EXPR_PTR(VPOB3, VPO24), SIG_EXPR_PTR(VPOB3, VPOOFF1));
+MS_PIN_DECL(P20, GPIOZ3, ROMA5, VPOB3);
+
+#define P21 204
+#define P21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(ROMA6, ROM8, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA6, ROM16, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA6, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB4, VPO12, P21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB4, VPO24, P21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, P21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO12),
+ SIG_EXPR_PTR(VPOB4, VPO24), SIG_EXPR_PTR(VPOB4, VPOOFF1));
+MS_PIN_DECL(P21, GPIOZ4, ROMA6, VPOB4);
+
+#define P22 205
+#define P22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(ROMA7, ROM8, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA7, ROM16, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA7, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB5, VPO12, P22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB5, VPO24, P22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO12),
+ SIG_EXPR_PTR(VPOB5, VPO24), SIG_EXPR_PTR(VPOB5, VPOOFF1));
+MS_PIN_DECL(P22, GPIOZ5, ROMA7, VPOB5);
+
+#define M19 206
+#define M19_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(ROMA8, ROM8, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA8, ROM16, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA8, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB6, VPO12, M19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB6, VPO24, M19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, M19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO12),
+ SIG_EXPR_PTR(VPOB6, VPO24), SIG_EXPR_PTR(VPOB6, VPOOFF1));
+MS_PIN_DECL(M19, GPIOZ6, ROMA8, VPOB6);
+
+#define M20 207
+#define M20_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(ROMA9, ROM8, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA9, ROM16, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA9, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB7, VPO12, M20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB7, VPO24, M20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, M20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO12),
+ SIG_EXPR_PTR(VPOB7, VPO24), SIG_EXPR_PTR(VPOB7, VPOOFF1));
+MS_PIN_DECL(M20, GPIOZ7, ROMA9, VPOB7);
+
+#define M21 208
+#define M21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(ROMA10, ROM8, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA10, ROM16, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA10, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG0, VPO12, M21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG0, VPO24, M21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG0, VPOOFF1, M21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG0, SIG_EXPR_PTR(VPOG0, VPO12),
+ SIG_EXPR_PTR(VPOG0, VPO24), SIG_EXPR_PTR(VPOG0, VPOOFF1));
+MS_PIN_DECL(M21, GPIOAA0, ROMA10, VPOG0);
+
+#define M22 209
+#define M22_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(ROMA11, ROM8, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA11, ROM16, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA11, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG1, VPO12, M22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG1, VPO24, M22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG1, VPOOFF1, M22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG1, SIG_EXPR_PTR(VPOG1, VPO12),
+ SIG_EXPR_PTR(VPOG1, VPO24), SIG_EXPR_PTR(VPOG1, VPOOFF1));
+MS_PIN_DECL(M22, GPIOAA1, ROMA11, VPOG1);
+
+#define L18 210
+#define L18_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(ROMA12, ROM8, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA12, ROM16, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA12, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG2, VPO12, L18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG2, VPO24, L18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, L18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO12),
+ SIG_EXPR_PTR(VPOG2, VPO24), SIG_EXPR_PTR(VPOG2, VPOOFF1));
+MS_PIN_DECL(L18, GPIOAA2, ROMA12, VPOG2);
+
+#define L19 211
+#define L19_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(ROMA13, ROM8, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA13, ROM16, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA13, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG3, VPO12, L19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG3, VPO24, L19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, L19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO12),
+ SIG_EXPR_PTR(VPOG3, VPO24), SIG_EXPR_PTR(VPOG3, VPOOFF1));
+MS_PIN_DECL(L19, GPIOAA3, ROMA13, VPOG3);
+
+#define L20 212
+#define L20_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(ROMA14, ROM8, L20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA14, ROM16, L20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA14, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG4, VPO24, L20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, L20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG4, VPO24, VPOOFF1);
+MS_PIN_DECL(L20, GPIOAA4, ROMA14, VPOG4);
+
+#define L21 213
+#define L21_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(ROMA15, ROM8, L21_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA15, ROM16, L21_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA15, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG5, VPO24, L21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, L21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG5, VPO24, VPOOFF1);
+MS_PIN_DECL(L21, GPIOAA5, ROMA15, VPOG5);
+
+#define T18 214
+#define T18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(ROMA16, ROM8, T18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA16, ROM16, T18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA16, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG6, VPO24, T18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, T18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG6, VPO24, VPOOFF1);
+MS_PIN_DECL(T18, GPIOAA6, ROMA16, VPOG6);
+
+#define N18 215
+#define N18_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(ROMA17, ROM8, N18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA17, ROM16, N18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA17, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG7, VPO24, N18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, N18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG7, VPO24, VPOOFF1);
+MS_PIN_DECL(N18, GPIOAA7, ROMA17, VPOG7);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(ROMA18, ROM8, N19_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA18, ROM16, N19_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA18, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR0, VPO24, N19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR0, VPOOFF1, N19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR0, VPO24, VPOOFF1);
+MS_PIN_DECL(N19, GPIOAB0, ROMA18, VPOR0);
+
+#define M18 217
+#define M18_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(ROMA19, ROM8, M18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA19, ROM16, M18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA19, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR1, VPO24, M18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR1, VPOOFF1, M18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR1, VPO24, VPOOFF1);
+MS_PIN_DECL(M18, GPIOAB1, ROMA19, VPOR1);
+
+#define N22 218
+#define N22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(ROMA20, ROM8, N22_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA20, ROM16, N22_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA20, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR2, VPO24, N22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, N22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR2, VPO24, VPOOFF1);
+MS_PIN_DECL(N22, GPIOAB2, ROMA20, VPOR2);
+
+#define N20 219
+#define N20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(ROMA21, ROM8, N20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA21, ROM16, N20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA21, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR3, VPO24, N20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, N20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR3, VPO24, VPOOFF1);
+MS_PIN_DECL(N20, GPIOAB3, ROMA21, VPOR3);
+
+FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
+ U19, R22, P18, P19, P20, P21, P22, M19, M20, M21, M22, L18,
+ L19, L20, L21, T18, N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
+ A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19, L20, L21, T18,
+ N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20, R22, P18, P19, P20, P21, P22, M19,
+ M20, M21, M22, L18, L19, L20, L21, T18, N18, N19, M18, N22,
+ N20);
+FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19);
+
/* Note we account for GPIOY4-GPIOY7 even though they're not valid, thus 216
* pins becomes 220.
*/
@@ -883,84 +1715,180 @@ FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(A1),
+ ASPEED_PINCTRL_PIN(A10),
ASPEED_PINCTRL_PIN(A11),
ASPEED_PINCTRL_PIN(A12),
ASPEED_PINCTRL_PIN(A13),
+ ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A6),
ASPEED_PINCTRL_PIN(A7),
ASPEED_PINCTRL_PIN(A8),
+ ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
ASPEED_PINCTRL_PIN(AA2),
ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AA6),
ASPEED_PINCTRL_PIN(AA7),
ASPEED_PINCTRL_PIN(AB1),
ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
+ ASPEED_PINCTRL_PIN(AB6),
ASPEED_PINCTRL_PIN(AB7),
ASPEED_PINCTRL_PIN(B1),
+ ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
ASPEED_PINCTRL_PIN(B12),
+ ASPEED_PINCTRL_PIN(B13),
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
+ ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
+ ASPEED_PINCTRL_PIN(B5),
ASPEED_PINCTRL_PIN(B6),
ASPEED_PINCTRL_PIN(B7),
+ ASPEED_PINCTRL_PIN(B9),
ASPEED_PINCTRL_PIN(C1),
+ ASPEED_PINCTRL_PIN(C10),
ASPEED_PINCTRL_PIN(C11),
ASPEED_PINCTRL_PIN(C12),
+ ASPEED_PINCTRL_PIN(C13),
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
+ ASPEED_PINCTRL_PIN(C16),
ASPEED_PINCTRL_PIN(C17),
+ ASPEED_PINCTRL_PIN(C18),
ASPEED_PINCTRL_PIN(C2),
+ ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(C6),
ASPEED_PINCTRL_PIN(C7),
+ ASPEED_PINCTRL_PIN(C8),
+ ASPEED_PINCTRL_PIN(C9),
ASPEED_PINCTRL_PIN(D1),
+ ASPEED_PINCTRL_PIN(D10),
ASPEED_PINCTRL_PIN(D11),
ASPEED_PINCTRL_PIN(D12),
+ ASPEED_PINCTRL_PIN(D13),
ASPEED_PINCTRL_PIN(D14),
ASPEED_PINCTRL_PIN(D15),
ASPEED_PINCTRL_PIN(D16),
ASPEED_PINCTRL_PIN(D17),
ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D3),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
+ ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
+ ASPEED_PINCTRL_PIN(D8),
+ ASPEED_PINCTRL_PIN(D9),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E11),
ASPEED_PINCTRL_PIN(E12),
+ ASPEED_PINCTRL_PIN(E13),
ASPEED_PINCTRL_PIN(E14),
+ ASPEED_PINCTRL_PIN(E15),
ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E5),
+ ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
+ ASPEED_PINCTRL_PIN(E8),
+ ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F18),
+ ASPEED_PINCTRL_PIN(F20),
ASPEED_PINCTRL_PIN(F3),
ASPEED_PINCTRL_PIN(F4),
ASPEED_PINCTRL_PIN(F5),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G19),
+ ASPEED_PINCTRL_PIN(G20),
ASPEED_PINCTRL_PIN(G5),
ASPEED_PINCTRL_PIN(H1),
+ ASPEED_PINCTRL_PIN(H18),
ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H2),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(J21),
ASPEED_PINCTRL_PIN(J3),
+ ASPEED_PINCTRL_PIN(J4),
+ ASPEED_PINCTRL_PIN(J5),
ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K20),
+ ASPEED_PINCTRL_PIN(K5),
+ ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
+ ASPEED_PINCTRL_PIN(L2),
+ ASPEED_PINCTRL_PIN(L20),
+ ASPEED_PINCTRL_PIN(L21),
ASPEED_PINCTRL_PIN(L22),
+ ASPEED_PINCTRL_PIN(L3),
+ ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(L5),
+ ASPEED_PINCTRL_PIN(M1),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M2),
+ ASPEED_PINCTRL_PIN(M20),
+ ASPEED_PINCTRL_PIN(M21),
+ ASPEED_PINCTRL_PIN(M22),
+ ASPEED_PINCTRL_PIN(M3),
+ ASPEED_PINCTRL_PIN(M4),
+ ASPEED_PINCTRL_PIN(M5),
+ ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
+ ASPEED_PINCTRL_PIN(N2),
+ ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
+ ASPEED_PINCTRL_PIN(N22),
+ ASPEED_PINCTRL_PIN(N3),
+ ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R22),
ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T18),
ASPEED_PINCTRL_PIN(T19),
ASPEED_PINCTRL_PIN(T2),
ASPEED_PINCTRL_PIN(T4),
@@ -979,28 +1907,61 @@ static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(V20),
ASPEED_PINCTRL_PIN(V21),
ASPEED_PINCTRL_PIN(V22),
+ ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(V7),
ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W2),
ASPEED_PINCTRL_PIN(W21),
ASPEED_PINCTRL_PIN(W22),
+ ASPEED_PINCTRL_PIN(W3),
ASPEED_PINCTRL_PIN(W4),
ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(W7),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y21),
ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
ASPEED_PINCTRL_PIN(Y4),
ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
ASPEED_PINCTRL_PIN(Y7),
};
static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
ASPEED_PINCTRL_GROUP(BMCINT),
ASPEED_PINCTRL_GROUP(DDCCLK),
ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(EXTRST),
ASPEED_PINCTRL_GROUP(FLACK),
ASPEED_PINCTRL_GROUP(FLBUSY),
ASPEED_PINCTRL_GROUP(FLWP),
+ ASPEED_PINCTRL_GROUP(GPID),
ASPEED_PINCTRL_GROUP(GPID0),
+ ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
ASPEED_PINCTRL_GROUP(GPIE2),
ASPEED_PINCTRL_GROUP(GPIE4),
@@ -1009,6 +1970,7 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
ASPEED_PINCTRL_GROUP(I2C13),
+ ASPEED_PINCTRL_GROUP(I2C14),
ASPEED_PINCTRL_GROUP(I2C3),
ASPEED_PINCTRL_GROUP(I2C4),
ASPEED_PINCTRL_GROUP(I2C5),
@@ -1018,25 +1980,37 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C9),
ASPEED_PINCTRL_GROUP(LPCPD),
ASPEED_PINCTRL_GROUP(LPCPME),
- ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
ASPEED_PINCTRL_GROUP(NCTS3),
ASPEED_PINCTRL_GROUP(NCTS4),
ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
ASPEED_PINCTRL_GROUP(NDCD3),
ASPEED_PINCTRL_GROUP(NDCD4),
ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NDTS4),
ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
ASPEED_PINCTRL_GROUP(NRI3),
ASPEED_PINCTRL_GROUP(NRI4),
ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -1046,7 +2020,9 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(PWM6),
ASPEED_PINCTRL_GROUP(PWM7),
ASPEED_PINCTRL_GROUP(RGMII1),
+ ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
+ ASPEED_PINCTRL_GROUP(RMII2),
ASPEED_PINCTRL_GROUP(ROM16),
ASPEED_PINCTRL_GROUP(ROM8),
ASPEED_PINCTRL_GROUP(ROMCS1),
@@ -1054,21 +2030,48 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ROMCS3),
ASPEED_PINCTRL_GROUP(ROMCS4),
ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
ASPEED_PINCTRL_GROUP(RXD3),
ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SGPMCK),
ASPEED_PINCTRL_GROUP(SGPMI),
+ ASPEED_PINCTRL_GROUP(SGPMLD),
+ ASPEED_PINCTRL_GROUP(SGPMO),
+ ASPEED_PINCTRL_GROUP(SGPSCK),
+ ASPEED_PINCTRL_GROUP(SGPSI0),
+ ASPEED_PINCTRL_GROUP(SGPSI1),
+ ASPEED_PINCTRL_GROUP(SGPSLD),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
ASPEED_PINCTRL_GROUP(SIOPBI),
ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
+ ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1DEBUG),
+ ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPICS1),
ASPEED_PINCTRL_GROUP(TIMER3),
+ ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
ASPEED_PINCTRL_GROUP(TXD3),
ASPEED_PINCTRL_GROUP(TXD4),
ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
+ ASPEED_PINCTRL_GROUP(VGABIOS_ROM),
ASPEED_PINCTRL_GROUP(VGAHS),
ASPEED_PINCTRL_GROUP(VGAVS),
ASPEED_PINCTRL_GROUP(VPI18),
@@ -1076,17 +2079,40 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(VPI30),
ASPEED_PINCTRL_GROUP(VPO12),
ASPEED_PINCTRL_GROUP(VPO24),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
ASPEED_PINCTRL_FUNC(BMCINT),
ASPEED_PINCTRL_FUNC(DDCCLK),
ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(EXTRST),
ASPEED_PINCTRL_FUNC(FLACK),
ASPEED_PINCTRL_FUNC(FLBUSY),
ASPEED_PINCTRL_FUNC(FLWP),
+ ASPEED_PINCTRL_FUNC(GPID),
ASPEED_PINCTRL_FUNC(GPID0),
+ ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
ASPEED_PINCTRL_FUNC(GPIE2),
ASPEED_PINCTRL_FUNC(GPIE4),
@@ -1095,6 +2121,7 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
ASPEED_PINCTRL_FUNC(I2C13),
+ ASPEED_PINCTRL_FUNC(I2C14),
ASPEED_PINCTRL_FUNC(I2C3),
ASPEED_PINCTRL_FUNC(I2C4),
ASPEED_PINCTRL_FUNC(I2C5),
@@ -1104,24 +2131,37 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C9),
ASPEED_PINCTRL_FUNC(LPCPD),
ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
ASPEED_PINCTRL_FUNC(NCTS3),
ASPEED_PINCTRL_FUNC(NCTS4),
ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
ASPEED_PINCTRL_FUNC(NDCD3),
ASPEED_PINCTRL_FUNC(NDCD4),
ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NDTS4),
ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
ASPEED_PINCTRL_FUNC(NRI3),
ASPEED_PINCTRL_FUNC(NRI4),
ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -1131,7 +2171,9 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(PWM6),
ASPEED_PINCTRL_FUNC(PWM7),
ASPEED_PINCTRL_FUNC(RGMII1),
+ ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
+ ASPEED_PINCTRL_FUNC(RMII2),
ASPEED_PINCTRL_FUNC(ROM16),
ASPEED_PINCTRL_FUNC(ROM8),
ASPEED_PINCTRL_FUNC(ROMCS1),
@@ -1139,21 +2181,48 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ROMCS3),
ASPEED_PINCTRL_FUNC(ROMCS4),
ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
ASPEED_PINCTRL_FUNC(RXD3),
ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SGPMCK),
ASPEED_PINCTRL_FUNC(SGPMI),
+ ASPEED_PINCTRL_FUNC(SGPMLD),
+ ASPEED_PINCTRL_FUNC(SGPMO),
+ ASPEED_PINCTRL_FUNC(SGPSCK),
+ ASPEED_PINCTRL_FUNC(SGPSI0),
+ ASPEED_PINCTRL_FUNC(SGPSI1),
+ ASPEED_PINCTRL_FUNC(SGPSLD),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
ASPEED_PINCTRL_FUNC(SIOPBI),
ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
+ ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1DEBUG),
+ ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPICS1),
ASPEED_PINCTRL_FUNC(TIMER3),
+ ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
ASPEED_PINCTRL_FUNC(TXD3),
ASPEED_PINCTRL_FUNC(TXD4),
ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
+ ASPEED_PINCTRL_FUNC(VGABIOS_ROM),
ASPEED_PINCTRL_FUNC(VGAHS),
ASPEED_PINCTRL_FUNC(VGAVS),
ASPEED_PINCTRL_FUNC(VPI18),
@@ -1161,6 +2230,8 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(VPI30),
ASPEED_PINCTRL_FUNC(VPO12),
ASPEED_PINCTRL_FUNC(VPO24),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g4_pinctrl_data = {
--
2.7.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 6/6] pinctrl: aspeed-g5: Add mux configuration for all pins
2016-11-02 14:37 [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins Andrew Jeffery
` (4 preceding siblings ...)
2016-11-02 14:38 ` [PATCH v2 5/6] pinctrl: aspeed-g4: Add mux configuration for all pins Andrew Jeffery
@ 2016-11-02 14:38 ` Andrew Jeffery
5 siblings, 0 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-02 14:38 UTC (permalink / raw)
To: Lee Jones, Linus Walleij
Cc: Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery
The patch introducing the g5 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms and the AST2500 evaluation board.
Now, update the bindings document to reflect the complete functionality
and implement the necessary pin configuration tables in the driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
No significant change since v1.
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 17 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1475 +++++++++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 1 +
3 files changed, 1486 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index f5c427d11337..f16be8fe6c76 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -53,10 +53,19 @@ VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
-GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
-I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
-TIMER7 TIMER8 VGABIOSROM
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
+GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
+I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME
+LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1
+NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2
+NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4
+PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10
+SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9
+SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0
+SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
+TXD3 TXD4 UART6 USBCKI VGABIOSROM VGAHS VGAVS VPI24 VPO WDTRST1 WDTRST2
g4 Example:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 99c4fa9bf861..9d4ad10dd1c6 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -25,14 +25,27 @@
#include "../pinctrl-utils.h"
#include "pinctrl-aspeed.h"
-#define ASPEED_G5_NR_PINS 228
+#define ASPEED_G5_NR_PINS 232
#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define LHCR0 0x00
+#define GFX064 0x64
+
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+#define D14 1
+SSSF_PIN_DECL(D14, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
+#define D13 2
+SIG_EXPR_LIST_DECL_SINGLE(SPI1CS1, SPI1CS1, SIG_DESC_SET(SCU80, 15));
+SIG_EXPR_LIST_DECL_SINGLE(TIMER3, TIMER3, SIG_DESC_SET(SCU80, 2));
+MS_PIN_DECL(D13, GPIOA2, SPI1CS1, TIMER3);
+FUNC_GROUP_DECL(SPI1CS1, D13);
+FUNC_GROUP_DECL(TIMER3, D13);
+
#define E13 3
SSSF_PIN_DECL(E13, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
@@ -72,6 +85,32 @@ FUNC_GROUP_DECL(TIMER8, B13);
FUNC_GROUP_DECL(MDIO2, C13, B13);
+#define K19 8
+GPIO_PIN_DECL(K19, GPIOB0);
+
+#define L19 9
+GPIO_PIN_DECL(L19, GPIOB1);
+
+#define L18 10
+GPIO_PIN_DECL(L18, GPIOB2);
+
+#define K18 11
+GPIO_PIN_DECL(K18, GPIOB3);
+
+#define J20 12
+SSSF_PIN_DECL(J20, GPIOB4, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+
+#define H21 13
+#define H21_DESC SIG_DESC_SET(SCU80, 13)
+SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCSMI, LPCSMI, H21_DESC);
+MS_PIN_DECL(H21, GPIOB5, LPCPD, LPCSMI);
+FUNC_GROUP_DECL(LPCPD, H21);
+FUNC_GROUP_DECL(LPCSMI, H21);
+
+#define H22 14
+SSSF_PIN_DECL(H22, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+
#define H20 15
GPIO_PIN_DECL(H20, GPIOB7);
@@ -168,7 +207,44 @@ MS_PIN_DECL(D20, GPIOD3, SD2DAT1, GPID2OUT);
FUNC_GROUP_DECL(GPID2, F20, D20);
-#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 21)
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define D21 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(D21, GPIOD4, SD2DAT2, GPID4IN);
+
+#define E20 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(E20, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, D21, E20);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define G18 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(G18, GPIOD6, SD2CD, GPID6IN);
+
+#define C21 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(C21, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, G18, C21);
+FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, G18, C21);
+
+#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define B20 32
@@ -177,6 +253,7 @@ SIG_EXPR_DECL(GPIE0IN, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0IN, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0IN, GPIE0, GPIE);
MS_PIN_DECL(B20, GPIOE0, NCTS3, GPIE0IN);
+FUNC_GROUP_DECL(NCTS3, B20);
#define C20 33
SIG_EXPR_LIST_DECL_SINGLE(NDCD3, NDCD3, SIG_DESC_SET(SCU80, 17));
@@ -184,9 +261,227 @@ SIG_EXPR_DECL(GPIE0OUT, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0OUT, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0OUT, GPIE0, GPIE);
MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
+FUNC_GROUP_DECL(NDCD3, C20);
FUNC_GROUP_DECL(GPIE0, B20, C20);
+#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
+
+#define F18 34
+SIG_EXPR_LIST_DECL_SINGLE(NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
+SIG_EXPR_DECL(GPIE2IN, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2IN, GPIE2, GPIE);
+MS_PIN_DECL(F18, GPIOE2, NDSR3, GPIE2IN);
+FUNC_GROUP_DECL(NDSR3, F18);
+
+
+#define F17 35
+SIG_EXPR_LIST_DECL_SINGLE(NRI3, NRI3, SIG_DESC_SET(SCU80, 19));
+SIG_EXPR_DECL(GPIE2OUT, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2OUT, GPIE2, GPIE);
+MS_PIN_DECL(F17, GPIOE3, NRI3, GPIE2OUT);
+FUNC_GROUP_DECL(NRI3, F17);
+
+FUNC_GROUP_DECL(GPIE2, F18, F17);
+
+#define GPIE4_DESC SIG_DESC_SET(SCU8C, 14)
+
+#define E18 36
+SIG_EXPR_LIST_DECL_SINGLE(NDTR3, NDTR3, SIG_DESC_SET(SCU80, 20));
+SIG_EXPR_DECL(GPIE4IN, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4IN, GPIE4, GPIE);
+MS_PIN_DECL(E18, GPIOE4, NDTR3, GPIE4IN);
+FUNC_GROUP_DECL(NDTR3, E18);
+
+#define D19 37
+SIG_EXPR_LIST_DECL_SINGLE(NRTS3, NRTS3, SIG_DESC_SET(SCU80, 21));
+SIG_EXPR_DECL(GPIE4OUT, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4OUT, GPIE4, GPIE);
+MS_PIN_DECL(D19, GPIOE5, NRTS3, GPIE4OUT);
+FUNC_GROUP_DECL(NRTS3, D19);
+
+FUNC_GROUP_DECL(GPIE4, E18, D19);
+
+#define GPIE6_DESC SIG_DESC_SET(SCU8C, 15)
+
+#define A20 38
+SIG_EXPR_LIST_DECL_SINGLE(TXD3, TXD3, SIG_DESC_SET(SCU80, 22));
+SIG_EXPR_DECL(GPIE6IN, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6IN, GPIE6, GPIE);
+MS_PIN_DECL(A20, GPIOE6, TXD3, GPIE6IN);
+FUNC_GROUP_DECL(TXD3, A20);
+
+#define B19 39
+SIG_EXPR_LIST_DECL_SINGLE(RXD3, RXD3, SIG_DESC_SET(SCU80, 23));
+SIG_EXPR_DECL(GPIE6OUT, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6OUT, GPIE6, GPIE);
+MS_PIN_DECL(B19, GPIOE7, RXD3, GPIE6OUT);
+FUNC_GROUP_DECL(RXD3, B19);
+
+FUNC_GROUP_DECL(GPIE6, A20, B19);
+
+#define LPCHC_DESC SIG_DESC_IP_SET(ASPEED_IP_LPCHC, LHCR0, 0)
+#define LPCPLUS_DESC SIG_DESC_SET(SCU90, 30)
+
+#define J19 40
+SIG_EXPR_DECL(LHAD0, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD0, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD0, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS4, NCTS4, SIG_DESC_SET(SCU80, 24));
+MS_PIN_DECL(J19, GPIOF0, LHAD0, NCTS4);
+FUNC_GROUP_DECL(NCTS4, J19);
+
+#define J18 41
+SIG_EXPR_DECL(LHAD1, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD1, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD1, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD4, NDCD4, SIG_DESC_SET(SCU80, 25));
+MS_PIN_DECL(J18, GPIOF1, LHAD1, NDCD4);
+FUNC_GROUP_DECL(NDCD4, J18);
+
+#define B22 42
+SIG_EXPR_DECL(LHAD2, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD2, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD2, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+MS_PIN_DECL(B22, GPIOF2, LHAD2, NDSR4);
+FUNC_GROUP_DECL(NDSR4, B22);
+
+#define B21 43
+SIG_EXPR_DECL(LHAD3, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD3, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD3, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
+MS_PIN_DECL(B21, GPIOF3, LHAD3, NRI4);
+FUNC_GROUP_DECL(NRI4, B21);
+
+#define A21 44
+SIG_EXPR_DECL(LHCLK, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHCLK, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHCLK, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR4, NDTR4, SIG_DESC_SET(SCU80, 28));
+MS_PIN_DECL(A21, GPIOF4, LHCLK, NDTR4);
+FUNC_GROUP_DECL(NDTR4, A21);
+
+#define H19 45
+SIG_EXPR_DECL(LHFRAME, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHFRAME, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHFRAME, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS4, NRTS4, SIG_DESC_SET(SCU80, 29));
+MS_PIN_DECL(H19, GPIOF5, LHFRAME, NRTS4);
+FUNC_GROUP_DECL(NRTS4, H19);
+
+#define G17 46
+SIG_EXPR_LIST_DECL_SINGLE(LHSIRQ, LPCHC, LPCHC_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD4, TXD4, SIG_DESC_SET(SCU80, 30));
+MS_PIN_DECL(G17, GPIOF6, LHSIRQ, TXD4);
+FUNC_GROUP_DECL(TXD4, G17);
+
+#define H18 47
+SIG_EXPR_DECL(LHRST, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHRST, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHRST, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(RXD4, RXD4, SIG_DESC_SET(SCU80, 31));
+MS_PIN_DECL(H18, GPIOF7, LHRST, RXD4);
+FUNC_GROUP_DECL(RXD4, H18);
+
+FUNC_GROUP_DECL(LPCHC, J19, J18, B22, B21, A21, H19, G17, H18);
+FUNC_GROUP_DECL(LPCPLUS, J19, J18, B22, B21, A21, H19, H18);
+
+#define A19 48
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1CK, SGPS1, COND1, SIG_DESC_SET(SCU84, 0));
+SS_PIN_DECL(A19, GPIOG0, SGPS1CK);
+
+#define E19 49
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1LD, SGPS1, COND1, SIG_DESC_SET(SCU84, 1));
+SS_PIN_DECL(E19, GPIOG1, SGPS1LD);
+
+#define C19 50
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I0, SGPS1, COND1, SIG_DESC_SET(SCU84, 2));
+SS_PIN_DECL(C19, GPIOG2, SGPS1I0);
+
+#define E16 51
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I1, SGPS1, COND1, SIG_DESC_SET(SCU84, 3));
+SS_PIN_DECL(E16, GPIOG3, SGPS1I1);
+
+FUNC_GROUP_DECL(SGPS1, A19, E19, C19, E16);
+
+#define SGPS2_DESC SIG_DESC_SET(SCU94, 12)
+
+#define E17 52
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2CK, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT1, SALT1, COND1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(E17, GPIOG4, SGPS2CK, SALT1);
+FUNC_GROUP_DECL(SALT1, E17);
+
+#define D16 53
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2LD, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT2, SALT2, COND1, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(D16, GPIOG5, SGPS2LD, SALT2);
+FUNC_GROUP_DECL(SALT2, D16);
+
+#define D15 54
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I0, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT3, SALT3, COND1, SIG_DESC_SET(SCU84, 6));
+MS_PIN_DECL(D15, GPIOG6, SGPS2I0, SALT3);
+FUNC_GROUP_DECL(SALT3, D15);
+
+#define E14 55
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I1, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT4, SALT4, COND1, SIG_DESC_SET(SCU84, 7));
+MS_PIN_DECL(E14, GPIOG7, SGPS2I1, SALT4);
+FUNC_GROUP_DECL(SALT4, E14);
+
+FUNC_GROUP_DECL(SGPS2, E17, D16, D15, E14);
+
+#define UART6_DESC SIG_DESC_SET(SCU90, 7)
+
+#define A18 56
+SIG_EXPR_LIST_DECL_SINGLE(DASHA18, DASHA18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A18, GPIOH0, DASHA18, NCTS6);
+
+#define B18 57
+SIG_EXPR_LIST_DECL_SINGLE(DASHB18, DASHB18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B18, GPIOH1, DASHB18, NDCD6);
+
+#define D17 58
+SIG_EXPR_LIST_DECL_SINGLE(DASHD17, DASHD17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(D17, GPIOH2, DASHD17, NDSR6);
+
+#define C17 59
+SIG_EXPR_LIST_DECL_SINGLE(DASHC17, DASHC17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NRI6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(C17, GPIOH3, DASHC17, NRI6);
+
+#define A17 60
+SIG_EXPR_LIST_DECL_SINGLE(DASHA17, DASHA17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A17, GPIOH4, DASHA17, NDTR6);
+
+#define B17 61
+SIG_EXPR_LIST_DECL_SINGLE(DASHB17, DASHB17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B17, GPIOH5, DASHB17, NRTS6);
+
+#define A16 62
+SIG_EXPR_LIST_DECL_SINGLE(TXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(A16, GPIOH6, TXD6);
+
+#define D18 63
+SIG_EXPR_LIST_DECL_SINGLE(RXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(D18, GPIOH7, RXD6);
+
+FUNC_GROUP_DECL(UART6, A18, B18, D17, C17, A17, B17, A16, D18);
+
#define SPI1_DESC \
{ ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
#define SPI1DEBUG_DESC \
@@ -281,6 +576,30 @@ SS_PIN_DECL(N3, GPIOJ2, SGPMO);
SIG_EXPR_LIST_DECL_SINGLE(SGPMI, SGPM, SIG_DESC_SET(SCU84, 11));
SS_PIN_DECL(N4, GPIOJ3, SGPMI);
+#define N5 76
+SIG_EXPR_LIST_DECL_SINGLE(VGAHS, VGAHS, SIG_DESC_SET(SCU84, 12));
+SIG_EXPR_LIST_DECL_SINGLE(DASHN5, DASHN5, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(N5, GPIOJ4, VGAHS, DASHN5);
+FUNC_GROUP_DECL(VGAHS, N5);
+
+#define R4 77
+SIG_EXPR_LIST_DECL_SINGLE(VGAVS, VGAVS, SIG_DESC_SET(SCU84, 13));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR4, DASHR4, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(R4, GPIOJ5, VGAVS, DASHR4);
+FUNC_GROUP_DECL(VGAVS, R4);
+
+#define R3 78
+SIG_EXPR_LIST_DECL_SINGLE(DDCCLK, DDCCLK, SIG_DESC_SET(SCU84, 14));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR3, DASHR3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(R3, GPIOJ6, DDCCLK, DASHR3);
+FUNC_GROUP_DECL(DDCCLK, R3);
+
+#define T3 79
+SIG_EXPR_LIST_DECL_SINGLE(DDCDAT, DDCDAT, SIG_DESC_SET(SCU84, 15));
+SIG_EXPR_LIST_DECL_SINGLE(DASHT3, DASHT3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(T3, GPIOJ7, DDCDAT, DASHT3);
+FUNC_GROUP_DECL(DDCDAT, T3);
+
#define I2C5_DESC SIG_DESC_SET(SCU90, 18)
#define L3 80
@@ -329,11 +648,119 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
+#define T2 88
+SSSF_PIN_DECL(T2, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
+
#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI_24_RSVD_DESC SIG_DESC_SET(SCU90, 5)
+#define T1 89
+#define T1_DESC SIG_DESC_SET(SCU84, 17)
+SIG_EXPR_LIST_DECL_SINGLE(VPIDE, VPI24, VPI_24_RSVD_DESC, T1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD1, NDCD1, T1_DESC, COND2);
+MS_PIN_DECL(T1, GPIOL1, VPIDE, NDCD1);
+FUNC_GROUP_DECL(NDCD1, T1);
+
+#define U1 90
+#define U1_DESC SIG_DESC_SET(SCU84, 18)
+SIG_EXPR_LIST_DECL_SINGLE(DASHU1, VPI24, VPI_24_RSVD_DESC, U1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR1, NDSR1, U1_DESC);
+MS_PIN_DECL(U1, GPIOL2, DASHU1, NDSR1);
+FUNC_GROUP_DECL(NDSR1, U1);
+
+#define U2 91
+#define U2_DESC SIG_DESC_SET(SCU84, 19)
+SIG_EXPR_LIST_DECL_SINGLE(VPIHS, VPI24, VPI_24_RSVD_DESC, U2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI1, NRI1, U2_DESC, COND2);
+MS_PIN_DECL(U2, GPIOL3, VPIHS, NRI1);
+FUNC_GROUP_DECL(NRI1, U2);
+
+#define P4 92
+#define P4_DESC SIG_DESC_SET(SCU84, 20)
+SIG_EXPR_LIST_DECL_SINGLE(VPIVS, VPI24, VPI_24_RSVD_DESC, P4_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR1, NDTR1, P4_DESC, COND2);
+MS_PIN_DECL(P4, GPIOL4, VPIVS, NDTR1);
+FUNC_GROUP_DECL(NDTR1, P4);
+
+#define P3 93
+#define P3_DESC SIG_DESC_SET(SCU84, 21)
+SIG_EXPR_LIST_DECL_SINGLE(VPICLK, VPI24, VPI_24_RSVD_DESC, P3_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS1, NRTS1, P3_DESC, COND2);
+MS_PIN_DECL(P3, GPIOL5, VPICLK, NRTS1);
+FUNC_GROUP_DECL(NRTS1, P3);
+
+#define V1 94
+#define V1_DESC SIG_DESC_SET(SCU84, 22)
+SIG_EXPR_LIST_DECL_SINGLE(DASHV1, DASHV1, VPIRSVD_DESC, V1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD1, TXD1, V1_DESC, COND2);
+MS_PIN_DECL(V1, GPIOL6, DASHV1, TXD1);
+FUNC_GROUP_DECL(TXD1, V1);
+
+#define W1 95
+#define W1_DESC SIG_DESC_SET(SCU84, 23)
+SIG_EXPR_LIST_DECL_SINGLE(DASHW1, DASHW1, VPIRSVD_DESC, W1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, W1_DESC, COND2);
+MS_PIN_DECL(W1, GPIOL7, DASHW1, RXD1);
+FUNC_GROUP_DECL(RXD1, W1);
+
+#define Y1 96
+#define Y1_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB2, VPI24, VPI_24_RSVD_DESC, Y1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, Y1_DESC, COND2);
+MS_PIN_DECL(Y1, GPIOM0, VPIB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, Y1);
+
+#define AB2 97
+#define AB2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB3, VPI24, VPI_24_RSVD_DESC, AB2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, AB2_DESC, COND2);
+MS_PIN_DECL(AB2, GPIOM1, VPIB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, AB2);
+
+#define AA1 98
+#define AA1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB4, VPI24, VPI_24_RSVD_DESC, AA1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, AA1_DESC, COND2);
+MS_PIN_DECL(AA1, GPIOM2, VPIB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, AA1);
+
+#define Y2 99
+#define Y2_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB5, VPI24, VPI_24_RSVD_DESC, Y2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, Y2_DESC, COND2);
+MS_PIN_DECL(Y2, GPIOM3, VPIB5, NRI2);
+FUNC_GROUP_DECL(NRI2, Y2);
+
+#define AA2 100
+#define AA2_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB6, VPI24, VPI_24_RSVD_DESC, AA2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, AA2_DESC, COND2);
+MS_PIN_DECL(AA2, GPIOM4, VPIB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, AA2);
+
+#define P5 101
+#define P5_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB7, VPI24, VPI_24_RSVD_DESC, P5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, P5_DESC, COND2);
+MS_PIN_DECL(P5, GPIOM5, VPIB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, P5);
+
+#define R5 102
+#define R5_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB8, VPI24, VPI_24_RSVD_DESC, R5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, R5_DESC, COND2);
+MS_PIN_DECL(R5, GPIOM6, VPIB8, TXD2);
+FUNC_GROUP_DECL(TXD2, R5);
+
+#define T5 103
+#define T5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB9, VPI24, VPI_24_RSVD_DESC, T5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, T5_DESC, COND2);
+MS_PIN_DECL(T5, GPIOM7, VPIB9, RXD2);
+FUNC_GROUP_DECL(RXD2, T5);
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -399,9 +826,88 @@ SIG_EXPR_LIST_DECL_SINGLE(PWM7, PWM7, T4_DESC, COND2);
MS_PIN_DECL(T4, GPION7, VPIG7, PWM7);
FUNC_GROUP_DECL(PWM7, T4);
+#define U5 112
+SIG_EXPR_LIST_DECL_SINGLE(VPIG8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 8),
+ COND2);
+SS_PIN_DECL(U5, GPIOO0, VPIG8);
+
+#define U4 113
+SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9),
+ COND2);
+SS_PIN_DECL(U4, GPIOO1, VPIG9);
+
+#define V5 114
+SIG_EXPR_LIST_DECL_SINGLE(DASHV5, DASHV5, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(V5, GPIOO2, DASHV5);
+
+#define AB4 115
+SIG_EXPR_LIST_DECL_SINGLE(DASHAB4, DASHAB4, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB4, GPIOO3, DASHAB4);
+
+#define AB3 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12),
+ COND2);
+SS_PIN_DECL(AB3, GPIOO4, VPIR2);
+
+#define Y4 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13),
+ COND2);
+SS_PIN_DECL(Y4, GPIOO5, VPIR3);
+
+#define AA4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14),
+ COND2);
+SS_PIN_DECL(AA4, GPIOO6, VPIR4);
+
+#define W4 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15),
+ COND2);
+SS_PIN_DECL(W4, GPIOO7, VPIR5);
+
+#define V4 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16),
+ COND2);
+SS_PIN_DECL(V4, GPIOP0, VPIR6);
+
+#define W5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17),
+ COND2);
+SS_PIN_DECL(W5, GPIOP1, VPIR7);
+
+#define AA5 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18),
+ COND2);
+SS_PIN_DECL(AA5, GPIOP2, VPIR8);
+
+#define AB5 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19),
+ COND2);
+SS_PIN_DECL(AB5, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI24, T1, U2, P4, P3, Y1, AB2, AA1, Y2, AA2, P5, R5, T5, V3,
+ U3, W3, AA3, Y3, T4, U5, U4, AB3, Y4, AA4, W4, V4, W5, AA5,
+ AB5);
+
+#define Y6 124
+SIG_EXPR_LIST_DECL_SINGLE(DASHY6, DASHY6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 20));
+SS_PIN_DECL(Y6, GPIOP4, DASHY6);
+
+#define Y5 125
+SIG_EXPR_LIST_DECL_SINGLE(DASHY5, DASHY5, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 21));
+SS_PIN_DECL(Y5, GPIOP5, DASHY5);
+
+#define W6 126
+SIG_EXPR_LIST_DECL_SINGLE(DASHW6, DASHW6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 22));
+SS_PIN_DECL(W6, GPIOP6, DASHW6);
+
#define V6 127
SIG_EXPR_LIST_DECL_SINGLE(DASHV6, DASHV6, SIG_DESC_SET(SCU90, 28),
- SIG_DESC_SET(SCU88, 23));
+ SIG_DESC_SET(SCU88, 23));
SS_PIN_DECL(V6, GPIOP7, DASHV6);
#define I2C3_DESC SIG_DESC_SET(SCU90, 16)
@@ -446,6 +952,24 @@ SSSF_PIN_DECL(B10, GPIOQ6, OSCCLK, SIG_DESC_SET(SCU2C, 1));
#define N20 135
SSSF_PIN_DECL(N20, GPIOQ7, PEWAKE, SIG_DESC_SET(SCU2C, 29));
+#define AA19 136
+SSSF_PIN_DECL(AA19, GPIOR0, FWSPICS1, SIG_DESC_SET(SCU88, 24), COND2);
+
+#define T19 137
+SSSF_PIN_DECL(T19, GPIOR1, FWSPICS2, SIG_DESC_SET(SCU88, 25), COND2);
+
+#define T17 138
+SSSF_PIN_DECL(T17, GPIOR2, SPI2CS0, SIG_DESC_SET(SCU88, 26), COND2);
+
+#define Y19 139
+SSSF_PIN_DECL(Y19, GPIOR3, SPI2CK, SIG_DESC_SET(SCU88, 27), COND2);
+
+#define W19 140
+SSSF_PIN_DECL(W19, GPIOR4, SPI2MOSI, SIG_DESC_SET(SCU88, 28), COND2);
+
+#define V19 141
+SSSF_PIN_DECL(V19, GPIOR5, SPI2MISO, SIG_DESC_SET(SCU88, 29), COND2);
+
#define D8 142
SIG_EXPR_LIST_DECL_SINGLE(MDC1, MDIO1, SIG_DESC_SET(SCU88, 30));
SS_PIN_DECL(D8, GPIOR6, MDC1);
@@ -456,6 +980,93 @@ SS_PIN_DECL(E10, GPIOR7, MDIO1);
FUNC_GROUP_DECL(MDIO1, D8, E10);
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF2_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+
+#define CRT_DVO_EN_DESC SIG_DESC_IP_SET(ASPEED_IP_GFX, GFX064, 7)
+
+#define V20 144
+#define V20_DESC SIG_DESC_SET(SCU8C, 0)
+SIG_EXPR_DECL(VPOB2, VPO, V20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, V20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF2, V20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO),
+ SIG_EXPR_PTR(VPOB2, VPOOFF1), SIG_EXPR_PTR(VPOB2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SPI2CS1, SPI2CS1, V20_DESC);
+MS_PIN_DECL(V20, GPIOS0, VPOB2, SPI2CS1);
+FUNC_GROUP_DECL(SPI2CS1, V20);
+
+#define U19 145
+#define U19_DESC SIG_DESC_SET(SCU8C, 1)
+SIG_EXPR_DECL(VPOB3, VPO, U19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, U19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF2, U19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO),
+ SIG_EXPR_PTR(VPOB3, VPOOFF1), SIG_EXPR_PTR(VPOB3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(BMCINT, BMCINT, U19_DESC);
+MS_PIN_DECL(U19, GPIOS1, VPOB3, BMCINT);
+FUNC_GROUP_DECL(BMCINT, U19);
+
+#define R18 146
+#define R18_DESC SIG_DESC_SET(SCU8C, 2)
+SIG_EXPR_DECL(VPOB4, VPO, R18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, R18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF2, R18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO),
+ SIG_EXPR_PTR(VPOB4, VPOOFF1), SIG_EXPR_PTR(VPOB4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT5, SALT5, R18_DESC);
+MS_PIN_DECL(R18, GPIOS2, VPOB4, SALT5);
+FUNC_GROUP_DECL(SALT5, R18);
+
+#define P18 147
+#define P18_DESC SIG_DESC_SET(SCU8C, 3)
+SIG_EXPR_DECL(VPOB5, VPO, P18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF2, P18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO),
+ SIG_EXPR_PTR(VPOB5, VPOOFF1), SIG_EXPR_PTR(VPOB5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT6, SALT6, P18_DESC);
+MS_PIN_DECL(P18, GPIOS3, VPOB5, SALT6);
+FUNC_GROUP_DECL(SALT6, P18);
+
+#define R19 148
+#define R19_DESC SIG_DESC_SET(SCU8C, 4)
+SIG_EXPR_DECL(VPOB6, VPO, R19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, R19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF2, R19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO),
+ SIG_EXPR_PTR(VPOB6, VPOOFF1), SIG_EXPR_PTR(VPOB6, VPOOFF2));
+SS_PIN_DECL(R19, GPIOS4, VPOB6);
+
+#define W20 149
+#define W20_DESC SIG_DESC_SET(SCU8C, 5)
+SIG_EXPR_DECL(VPOB7, VPO, W20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, W20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF2, W20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO),
+ SIG_EXPR_PTR(VPOB7, VPOOFF1), SIG_EXPR_PTR(VPOB7, VPOOFF2));
+SS_PIN_DECL(W20, GPIOS5, VPOB7);
+
+#define U20 150
+#define U20_DESC SIG_DESC_SET(SCU8C, 6)
+SIG_EXPR_DECL(VPOB8, VPO, U20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF1, U20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF2, U20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB8, SIG_EXPR_PTR(VPOB8, VPO),
+ SIG_EXPR_PTR(VPOB8, VPOOFF1), SIG_EXPR_PTR(VPOB8, VPOOFF2));
+SS_PIN_DECL(U20, GPIOS6, VPOB8);
+
+#define AA20 151
+#define AA20_DESC SIG_DESC_SET(SCU8C, 7)
+SIG_EXPR_DECL(VPOB9, VPO, AA20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF1, AA20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF2, AA20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB9, SIG_EXPR_PTR(VPOB9, VPO),
+ SIG_EXPR_PTR(VPOB9, VPOOFF1), SIG_EXPR_PTR(VPOB9, VPOOFF2));
+SS_PIN_DECL(AA20, GPIOS7, VPOB9);
+
/* RGMII1/RMII1 */
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
@@ -637,6 +1248,481 @@ MS_PIN_DECL_(E6, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
FUNC_GROUP_DECL(RGMII2, B2, B1, A2, B3, D5, D4, C2, C1, C3, D1, D2, E6);
FUNC_GROUP_DECL(RMII2, B2, B1, A2, B3, C2, C3, D1, D2, E6);
+#define F4 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(F4, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, F4);
+
+#define F5 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(F5, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, F5);
+
+#define E2 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(E2, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, E2);
+
+#define E1 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(E1, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, E1);
+
+#define F3 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(F3, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, F3);
+
+#define E3 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(E3, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, E3);
+
+#define G5 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(G5, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, G5);
+
+#define G4 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(G4, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, G4);
+
+#define F2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(F2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, F2);
+
+#define G3 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(G3, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, G3);
+
+#define G2 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(G2, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, G2);
+
+#define F1 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(F1, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, F1);
+
+#define H5 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(H5, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, H5);
+
+#define G1 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(G1, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, G1);
+
+#define H3 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(H3, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, H3);
+
+#define H4 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(H4, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, H4);
+
+#define ACPI_DESC SIG_DESC_SET(HW_STRAP1, 19)
+
+#define R22 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R22, GPIOY0, SIOS3, DASHR22);
+FUNC_GROUP_DECL(SIOS3, R22);
+
+#define R21 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R21, GPIOY1, SIOS5, DASHR21);
+FUNC_GROUP_DECL(SIOS5, R21);
+
+#define P22 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP22, DASHP22, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P22, GPIOY2, SIOPWREQ, DASHP22);
+FUNC_GROUP_DECL(SIOPWREQ, P22);
+
+#define P21 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P21, GPIOY3, SIOONCTRL, DASHP21);
+FUNC_GROUP_DECL(SIOONCTRL, P21);
+
+#define M18 196
+SSSF_PIN_DECL(M18, GPIOY4, SCL1, SIG_DESC_SET(SCUA4, 12));
+
+#define M19 197
+SSSF_PIN_DECL(M19, GPIOY5, SDA1, SIG_DESC_SET(SCUA4, 13));
+
+#define M20 198
+SSSF_PIN_DECL(M20, GPIOY6, SCL2, SIG_DESC_SET(SCUA4, 14));
+
+#define P20 199
+SSSF_PIN_DECL(P20, GPIOY7, SDA2, SIG_DESC_SET(SCUA4, 15));
+
+#define PNOR_DESC SIG_DESC_SET(SCU90, 31)
+
+#define Y20 200
+#define Y20_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(VPOG2, VPO, Y20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, Y20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF2, Y20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO),
+ SIG_EXPR_PTR(VPOG2, VPOOFF1), SIG_EXPR_PTR(VPOG2, VPOOFF2));
+SIG_EXPR_DECL(SIOPBI, SIOPBI, Y20_DESC);
+SIG_EXPR_DECL(SIOPBI, ACPI, Y20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBI, SIOPBI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ0, GPIOZ0);
+MS_PIN_DECL_(Y20, SIG_EXPR_LIST_PTR(VPOG2), SIG_EXPR_LIST_PTR(SIOPBI),
+ SIG_EXPR_LIST_PTR(NORA0), SIG_EXPR_LIST_PTR(GPIOZ0));
+FUNC_GROUP_DECL(SIOPBI, Y20);
+
+#define AB20 201
+#define AB20_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(VPOG3, VPO, AB20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, AB20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF2, AB20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO),
+ SIG_EXPR_PTR(VPOG3, VPOOFF1), SIG_EXPR_PTR(VPOG3, VPOOFF2));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, AB20_DESC);
+SIG_EXPR_DECL(SIOPWRGD, ACPI, AB20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ1, GPIOZ1);
+MS_PIN_DECL_(AB20, SIG_EXPR_LIST_PTR(VPOG3), SIG_EXPR_LIST_PTR(SIOPWRGD),
+ SIG_EXPR_LIST_PTR(NORA1), SIG_EXPR_LIST_PTR(GPIOZ1));
+FUNC_GROUP_DECL(SIOPWRGD, AB20);
+
+#define AB21 202
+#define AB21_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(VPOG4, VPO, AB21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, AB21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF2, AB21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG4, SIG_EXPR_PTR(VPOG4, VPO),
+ SIG_EXPR_PTR(VPOG4, VPOOFF1), SIG_EXPR_PTR(VPOG4, VPOOFF2));
+SIG_EXPR_DECL(SIOPBO, SIOPBO, AB21_DESC);
+SIG_EXPR_DECL(SIOPBO, ACPI, AB21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBO, SIOPBO, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ2, GPIOZ2);
+MS_PIN_DECL_(AB21, SIG_EXPR_LIST_PTR(VPOG4), SIG_EXPR_LIST_PTR(SIOPBO),
+ SIG_EXPR_LIST_PTR(NORA2), SIG_EXPR_LIST_PTR(GPIOZ2));
+FUNC_GROUP_DECL(SIOPBO, AB21);
+
+#define AA21 203
+#define AA21_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(VPOG5, VPO, AA21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, AA21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF2, AA21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG5, SIG_EXPR_PTR(VPOG5, VPO),
+ SIG_EXPR_PTR(VPOG5, VPOOFF1), SIG_EXPR_PTR(VPOG5, VPOOFF2));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, AA21_DESC);
+SIG_EXPR_DECL(SIOSCI, ACPI, AA21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ3, GPIOZ3);
+MS_PIN_DECL_(AA21, SIG_EXPR_LIST_PTR(VPOG5), SIG_EXPR_LIST_PTR(SIOSCI),
+ SIG_EXPR_LIST_PTR(NORA3), SIG_EXPR_LIST_PTR(GPIOZ3));
+FUNC_GROUP_DECL(SIOSCI, AA21);
+
+FUNC_GROUP_DECL(ACPI, R22, R21, P22, P21, Y20, AB20, AB21, AA21);
+
+/* CRT DVO disabled, configured for single-edge mode */
+#define CRT_DVO_DS_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 0, 0 }
+
+/* CRT DVO disabled, configured for dual-edge mode */
+#define CRT_DVO_DD_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 1, 1 }
+
+/* CRT DVO enabled, configured for single-edge mode */
+#define CRT_DVO_ES_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 2, 2 }
+
+/* CRT DVO enabled, configured for dual-edge mode */
+#define CRT_DVO_ED_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 3, 3 }
+
+#define U21 204
+#define U21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(VPOG6, VPO, U21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, U21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF2, U21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG6, SIG_EXPR_PTR(VPOG6, VPO),
+ SIG_EXPR_PTR(VPOG6, VPOOFF1), SIG_EXPR_PTR(VPOG6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA4, PNOR, PNOR_DESC);
+MS_PIN_DECL(U21, GPIOZ4, VPOG6, NORA4);
+
+#define W22 205
+#define W22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(VPOG7, VPO, W22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, W22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF2, W22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG7, SIG_EXPR_PTR(VPOG7, VPO),
+ SIG_EXPR_PTR(VPOG7, VPOOFF1), SIG_EXPR_PTR(VPOG7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA5, PNOR, PNOR_DESC);
+MS_PIN_DECL(W22, GPIOZ5, VPOG7, NORA5);
+
+#define V22 206
+#define V22_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(VPOG8, VPO, V22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF1, V22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF2, V22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG8, SIG_EXPR_PTR(VPOG8, VPO),
+ SIG_EXPR_PTR(VPOG8, VPOOFF1), SIG_EXPR_PTR(VPOG8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA6, PNOR, PNOR_DESC);
+MS_PIN_DECL(V22, GPIOZ6, VPOG8, NORA6);
+
+#define W21 207
+#define W21_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(VPOG9, VPO, W21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF1, W21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF2, W21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG9, SIG_EXPR_PTR(VPOG9, VPO),
+ SIG_EXPR_PTR(VPOG9, VPOOFF1), SIG_EXPR_PTR(VPOG9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA7, PNOR, PNOR_DESC);
+MS_PIN_DECL(W21, GPIOZ7, VPOG9, NORA7);
+
+#define Y21 208
+#define Y21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(VPOR2, VPO, Y21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, Y21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF2, Y21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR2, SIG_EXPR_PTR(VPOR2, VPO),
+ SIG_EXPR_PTR(VPOR2, VPOOFF1), SIG_EXPR_PTR(VPOR2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT7, SALT7, Y21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA0, GPIOAA0);
+MS_PIN_DECL_(Y21, SIG_EXPR_LIST_PTR(VPOR2), SIG_EXPR_LIST_PTR(SALT7),
+ SIG_EXPR_LIST_PTR(NORD0), SIG_EXPR_LIST_PTR(GPIOAA0));
+FUNC_GROUP_DECL(SALT7, Y21);
+
+#define V21 209
+#define V21_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(VPOR3, VPO, V21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, V21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF2, V21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR3, SIG_EXPR_PTR(VPOR3, VPO),
+ SIG_EXPR_PTR(VPOR3, VPOOFF1), SIG_EXPR_PTR(VPOR3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT8, SALT8, V21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA1, GPIOAA1);
+MS_PIN_DECL_(V21, SIG_EXPR_LIST_PTR(VPOR3), SIG_EXPR_LIST_PTR(SALT8),
+ SIG_EXPR_LIST_PTR(NORD1), SIG_EXPR_LIST_PTR(GPIOAA1));
+FUNC_GROUP_DECL(SALT8, V21);
+
+#define Y22 210
+#define Y22_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(VPOR4, VPO, Y22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF1, Y22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF2, Y22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR4, SIG_EXPR_PTR(VPOR4, VPO),
+ SIG_EXPR_PTR(VPOR4, VPOOFF1), SIG_EXPR_PTR(VPOR4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT9, SALT9, Y22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA2, GPIOAA2);
+MS_PIN_DECL_(Y22, SIG_EXPR_LIST_PTR(VPOR4), SIG_EXPR_LIST_PTR(SALT9),
+ SIG_EXPR_LIST_PTR(NORD2), SIG_EXPR_LIST_PTR(GPIOAA2));
+FUNC_GROUP_DECL(SALT9, Y22);
+
+#define AA22 211
+#define AA22_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(VPOR5, VPO, AA22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF1, AA22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF2, AA22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR5, SIG_EXPR_PTR(VPOR5, VPO),
+ SIG_EXPR_PTR(VPOR5, VPOOFF1), SIG_EXPR_PTR(VPOR5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT10, SALT10, AA22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA3, GPIOAA3);
+MS_PIN_DECL_(AA22, SIG_EXPR_LIST_PTR(VPOR5), SIG_EXPR_LIST_PTR(SALT10),
+ SIG_EXPR_LIST_PTR(NORD3), SIG_EXPR_LIST_PTR(GPIOAA3));
+FUNC_GROUP_DECL(SALT10, AA22);
+
+#define U22 212
+#define U22_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(VPOR6, VPO, U22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF1, U22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF2, U22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR6, SIG_EXPR_PTR(VPOR6, VPO),
+ SIG_EXPR_PTR(VPOR6, VPOOFF1), SIG_EXPR_PTR(VPOR6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT11, SALT11, U22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD4, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA4, GPIOAA4);
+MS_PIN_DECL_(U22, SIG_EXPR_LIST_PTR(VPOR6), SIG_EXPR_LIST_PTR(SALT11),
+ SIG_EXPR_LIST_PTR(NORD4), SIG_EXPR_LIST_PTR(GPIOAA4));
+FUNC_GROUP_DECL(SALT11, U22);
+
+#define T20 213
+#define T20_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(VPOR7, VPO, T20_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF1, T20_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF2, T20_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR7, SIG_EXPR_PTR(VPOR7, VPO),
+ SIG_EXPR_PTR(VPOR7, VPOOFF1), SIG_EXPR_PTR(VPOR7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT12, SALT12, T20_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD5, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA5, GPIOAA5);
+MS_PIN_DECL_(T20, SIG_EXPR_LIST_PTR(VPOR7), SIG_EXPR_LIST_PTR(SALT12),
+ SIG_EXPR_LIST_PTR(NORD5), SIG_EXPR_LIST_PTR(GPIOAA5));
+FUNC_GROUP_DECL(SALT12, T20);
+
+#define N18 214
+#define N18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(VPOR8, VPO, N18_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF1, N18_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF2, N18_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR8, SIG_EXPR_PTR(VPOR8, VPO),
+ SIG_EXPR_PTR(VPOR8, VPOOFF1), SIG_EXPR_PTR(VPOR8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT13, SALT13, N18_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD6, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA6, GPIOAA6);
+MS_PIN_DECL_(N18, SIG_EXPR_LIST_PTR(VPOR8), SIG_EXPR_LIST_PTR(SALT13),
+ SIG_EXPR_LIST_PTR(NORD6), SIG_EXPR_LIST_PTR(GPIOAA6));
+FUNC_GROUP_DECL(SALT13, N18);
+
+#define P19 215
+#define P19_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(VPOR9, VPO, P19_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF1, P19_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF2, P19_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR9, SIG_EXPR_PTR(VPOR9, VPO),
+ SIG_EXPR_PTR(VPOR9, VPOOFF1), SIG_EXPR_PTR(VPOR9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT14, SALT14, P19_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD7, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA7, GPIOAA7);
+MS_PIN_DECL_(P19, SIG_EXPR_LIST_PTR(VPOR9), SIG_EXPR_LIST_PTR(SALT14),
+ SIG_EXPR_LIST_PTR(NORD7), SIG_EXPR_LIST_PTR(GPIOAA7));
+FUNC_GROUP_DECL(SALT14, P19);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(VPODE, VPO, N19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF1, N19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF2, N19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPODE, SIG_EXPR_PTR(VPODE, VPO),
+ SIG_EXPR_PTR(VPODE, VPOOFF1), SIG_EXPR_PTR(VPODE, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NOROE, PNOR, PNOR_DESC);
+MS_PIN_DECL(N19, GPIOAB0, VPODE, NOROE);
+
+#define T21 217
+#define T21_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(VPOHS, VPO, T21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF1, T21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF2, T21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOHS, SIG_EXPR_PTR(VPOHS, VPO),
+ SIG_EXPR_PTR(VPOHS, VPOOFF1), SIG_EXPR_PTR(VPOHS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORWE, PNOR, PNOR_DESC);
+MS_PIN_DECL(T21, GPIOAB1, VPOHS, NORWE);
+
+FUNC_GROUP_DECL(PNOR, Y20, AB20, AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22,
+ AA22, U22, T20, N18, P19, N19, T21);
+
+#define T22 218
+#define T22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(VPOVS, VPO, T22_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF1, T22_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF2, T22_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOVS, SIG_EXPR_PTR(VPOVS, VPO),
+ SIG_EXPR_PTR(VPOVS, VPOOFF1), SIG_EXPR_PTR(VPOVS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, T22_DESC);
+MS_PIN_DECL(T22, GPIOAB2, VPOVS, WDTRST1);
+FUNC_GROUP_DECL(WDTRST1, T22);
+
+#define R20 219
+#define R20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(VPOCLK, VPO, R20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF1, R20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF2, R20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOCLK, SIG_EXPR_PTR(VPOCLK, VPO),
+ SIG_EXPR_PTR(VPOCLK, VPOOFF1), SIG_EXPR_PTR(VPOCLK, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, R20_DESC);
+MS_PIN_DECL(R20, GPIOAB3, VPOCLK, WDTRST2);
+FUNC_GROUP_DECL(WDTRST2, R20);
+
+FUNC_GROUP_DECL(VPO, V20, U19, R18, P18, R19, W20, U20, AA20, Y20, AB20,
+ AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22, AA22, U22, T20,
+ N18, P19, N19, T21, T22, R20);
+
+#define ESPI_DESC SIG_DESC_SET(HW_STRAP1, 25)
+
+#define G21 224
+SIG_EXPR_LIST_DECL_SINGLE(ESPID0, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD0, LAD0, SIG_DESC_SET(SCUAC, 0));
+MS_PIN_DECL(G21, GPIOAC0, ESPID0, LAD0);
+FUNC_GROUP_DECL(LAD0, G21);
+
+#define G20 225
+SIG_EXPR_LIST_DECL_SINGLE(ESPID1, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD1, LAD1, SIG_DESC_SET(SCUAC, 1));
+MS_PIN_DECL(G20, GPIOAC1, ESPID1, LAD1);
+FUNC_GROUP_DECL(LAD1, G20);
+
+#define D22 226
+SIG_EXPR_LIST_DECL_SINGLE(ESPID2, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD2, LAD2, SIG_DESC_SET(SCUAC, 2));
+MS_PIN_DECL(D22, GPIOAC2, ESPID2, LAD2);
+FUNC_GROUP_DECL(LAD2, D22);
+
+#define E22 227
+SIG_EXPR_LIST_DECL_SINGLE(ESPID3, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD3, LAD3, SIG_DESC_SET(SCUAC, 3));
+MS_PIN_DECL(E22, GPIOAC3, ESPID3, LAD3);
+FUNC_GROUP_DECL(LAD3, E22);
+
+#define C22 228
+SIG_EXPR_LIST_DECL_SINGLE(ESPICK, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LCLK, LCLK, SIG_DESC_SET(SCUAC, 4));
+MS_PIN_DECL(C22, GPIOAC4, ESPICK, LCLK);
+FUNC_GROUP_DECL(LCLK, C22);
+
+#define F21 229
+SIG_EXPR_LIST_DECL_SINGLE(ESPICS, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LFRAME, LFRAME, SIG_DESC_SET(SCUAC, 5));
+MS_PIN_DECL(F21, GPIOAC5, ESPICS, LFRAME);
+FUNC_GROUP_DECL(LFRAME, F21);
+
+#define F22 230
+SIG_EXPR_LIST_DECL_SINGLE(ESPIALT, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LSIRQ, LSIRQ, SIG_DESC_SET(SCUAC, 6));
+MS_PIN_DECL(F22, GPIOAC6, ESPIALT, LSIRQ);
+FUNC_GROUP_DECL(LSIRQ, F22);
+
+#define G22 231
+SIG_EXPR_LIST_DECL_SINGLE(ESPIRST, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCRST, LPCRST, SIG_DESC_SET(SCUAC, 7));
+MS_PIN_DECL(G22, GPIOAC7, ESPIRST, LPCRST);
+FUNC_GROUP_DECL(LPCRST, G22);
+
+FUNC_GROUP_DECL(ESPI, G21, G20, D22, E22, C22, F21, F22, G22);
+
/* Pins, groups and functions are sort(1):ed alphabetically for sanity */
static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
@@ -646,12 +1732,32 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(A13),
ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
+ ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
+ ASPEED_PINCTRL_PIN(A21),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
+ ASPEED_PINCTRL_PIN(AA19),
+ ASPEED_PINCTRL_PIN(AA2),
+ ASPEED_PINCTRL_PIN(AA20),
+ ASPEED_PINCTRL_PIN(AA21),
+ ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB20),
+ ASPEED_PINCTRL_PIN(AB21),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
ASPEED_PINCTRL_PIN(B1),
ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
@@ -660,8 +1766,13 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
+ ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
ASPEED_PINCTRL_PIN(B20),
+ ASPEED_PINCTRL_PIN(B21),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
ASPEED_PINCTRL_PIN(B5),
@@ -673,62 +1784,210 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
ASPEED_PINCTRL_PIN(C16),
+ ASPEED_PINCTRL_PIN(C17),
ASPEED_PINCTRL_PIN(C18),
+ ASPEED_PINCTRL_PIN(C19),
ASPEED_PINCTRL_PIN(C2),
ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(D1),
ASPEED_PINCTRL_PIN(D10),
+ ASPEED_PINCTRL_PIN(D13),
+ ASPEED_PINCTRL_PIN(D14),
+ ASPEED_PINCTRL_PIN(D15),
+ ASPEED_PINCTRL_PIN(D16),
+ ASPEED_PINCTRL_PIN(D17),
+ ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D20),
+ ASPEED_PINCTRL_PIN(D21),
+ ASPEED_PINCTRL_PIN(D22),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
ASPEED_PINCTRL_PIN(D8),
ASPEED_PINCTRL_PIN(D9),
+ ASPEED_PINCTRL_PIN(E1),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E12),
ASPEED_PINCTRL_PIN(E13),
+ ASPEED_PINCTRL_PIN(E14),
ASPEED_PINCTRL_PIN(E15),
+ ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E17),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
+ ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E21),
+ ASPEED_PINCTRL_PIN(E22),
+ ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F1),
+ ASPEED_PINCTRL_PIN(F17),
+ ASPEED_PINCTRL_PIN(F18),
ASPEED_PINCTRL_PIN(F19),
+ ASPEED_PINCTRL_PIN(F2),
ASPEED_PINCTRL_PIN(F20),
+ ASPEED_PINCTRL_PIN(F21),
+ ASPEED_PINCTRL_PIN(F22),
+ ASPEED_PINCTRL_PIN(F3),
+ ASPEED_PINCTRL_PIN(F4),
+ ASPEED_PINCTRL_PIN(F5),
ASPEED_PINCTRL_PIN(F9),
+ ASPEED_PINCTRL_PIN(G1),
+ ASPEED_PINCTRL_PIN(G17),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G2),
+ ASPEED_PINCTRL_PIN(G20),
+ ASPEED_PINCTRL_PIN(G21),
+ ASPEED_PINCTRL_PIN(G22),
+ ASPEED_PINCTRL_PIN(G3),
+ ASPEED_PINCTRL_PIN(G4),
+ ASPEED_PINCTRL_PIN(G5),
+ ASPEED_PINCTRL_PIN(H18),
+ ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H21),
+ ASPEED_PINCTRL_PIN(H22),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(H5),
+ ASPEED_PINCTRL_PIN(J18),
+ ASPEED_PINCTRL_PIN(J19),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K19),
ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
ASPEED_PINCTRL_PIN(L2),
ASPEED_PINCTRL_PIN(L3),
ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M20),
ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
ASPEED_PINCTRL_PIN(N2),
ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
ASPEED_PINCTRL_PIN(N22),
ASPEED_PINCTRL_PIN(N3),
ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
ASPEED_PINCTRL_PIN(P1),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
ASPEED_PINCTRL_PIN(P2),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P3),
+ ASPEED_PINCTRL_PIN(P4),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R1),
+ ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R19),
+ ASPEED_PINCTRL_PIN(R2),
+ ASPEED_PINCTRL_PIN(R20),
+ ASPEED_PINCTRL_PIN(R21),
+ ASPEED_PINCTRL_PIN(R22),
+ ASPEED_PINCTRL_PIN(R3),
+ ASPEED_PINCTRL_PIN(R4),
+ ASPEED_PINCTRL_PIN(R5),
+ ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T17),
+ ASPEED_PINCTRL_PIN(T19),
+ ASPEED_PINCTRL_PIN(T2),
+ ASPEED_PINCTRL_PIN(T20),
+ ASPEED_PINCTRL_PIN(T21),
+ ASPEED_PINCTRL_PIN(T22),
+ ASPEED_PINCTRL_PIN(T3),
ASPEED_PINCTRL_PIN(T4),
+ ASPEED_PINCTRL_PIN(T5),
+ ASPEED_PINCTRL_PIN(U1),
+ ASPEED_PINCTRL_PIN(U19),
+ ASPEED_PINCTRL_PIN(U2),
+ ASPEED_PINCTRL_PIN(U20),
+ ASPEED_PINCTRL_PIN(U21),
+ ASPEED_PINCTRL_PIN(U22),
ASPEED_PINCTRL_PIN(U3),
+ ASPEED_PINCTRL_PIN(U4),
+ ASPEED_PINCTRL_PIN(U5),
+ ASPEED_PINCTRL_PIN(V1),
+ ASPEED_PINCTRL_PIN(V19),
ASPEED_PINCTRL_PIN(V2),
+ ASPEED_PINCTRL_PIN(V20),
+ ASPEED_PINCTRL_PIN(V21),
+ ASPEED_PINCTRL_PIN(V22),
ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W19),
ASPEED_PINCTRL_PIN(W2),
+ ASPEED_PINCTRL_PIN(W20),
+ ASPEED_PINCTRL_PIN(W21),
+ ASPEED_PINCTRL_PIN(W22),
ASPEED_PINCTRL_PIN(W3),
+ ASPEED_PINCTRL_PIN(W4),
+ ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y19),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y20),
+ ASPEED_PINCTRL_PIN(Y21),
+ ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
+ ASPEED_PINCTRL_PIN(Y4),
+ ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
};
static const struct aspeed_pin_group aspeed_g5_groups[] = {
+ ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
+ ASPEED_PINCTRL_GROUP(BMCINT),
+ ASPEED_PINCTRL_GROUP(DDCCLK),
+ ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(ESPI),
+ ASPEED_PINCTRL_GROUP(FWSPICS1),
+ ASPEED_PINCTRL_GROUP(FWSPICS2),
ASPEED_PINCTRL_GROUP(GPID0),
ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
+ ASPEED_PINCTRL_GROUP(GPIE2),
+ ASPEED_PINCTRL_GROUP(GPIE4),
+ ASPEED_PINCTRL_GROUP(GPIE6),
ASPEED_PINCTRL_GROUP(I2C10),
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
@@ -741,11 +2000,50 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(I2C7),
ASPEED_PINCTRL_GROUP(I2C8),
ASPEED_PINCTRL_GROUP(I2C9),
+ ASPEED_PINCTRL_GROUP(LAD0),
+ ASPEED_PINCTRL_GROUP(LAD1),
+ ASPEED_PINCTRL_GROUP(LAD2),
+ ASPEED_PINCTRL_GROUP(LAD3),
+ ASPEED_PINCTRL_GROUP(LCLK),
+ ASPEED_PINCTRL_GROUP(LFRAME),
+ ASPEED_PINCTRL_GROUP(LPCHC),
+ ASPEED_PINCTRL_GROUP(LPCPD),
+ ASPEED_PINCTRL_GROUP(LPCPLUS),
+ ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
+ ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(LSIRQ),
ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
+ ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
+ ASPEED_PINCTRL_GROUP(NCTS3),
+ ASPEED_PINCTRL_GROUP(NCTS4),
+ ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
+ ASPEED_PINCTRL_GROUP(NDCD3),
+ ASPEED_PINCTRL_GROUP(NDCD4),
+ ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
+ ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
+ ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
+ ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
+ ASPEED_PINCTRL_GROUP(NRI3),
+ ASPEED_PINCTRL_GROUP(NRI4),
+ ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
+ ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(NRTS4),
ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PEWAKE),
+ ASPEED_PINCTRL_GROUP(PNOR),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -758,22 +2056,102 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
ASPEED_PINCTRL_GROUP(RMII2),
+ ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
+ ASPEED_PINCTRL_GROUP(RXD3),
+ ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT10),
+ ASPEED_PINCTRL_GROUP(SALT11),
+ ASPEED_PINCTRL_GROUP(SALT12),
+ ASPEED_PINCTRL_GROUP(SALT13),
+ ASPEED_PINCTRL_GROUP(SALT14),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
+ ASPEED_PINCTRL_GROUP(SALT5),
+ ASPEED_PINCTRL_GROUP(SALT6),
+ ASPEED_PINCTRL_GROUP(SALT7),
+ ASPEED_PINCTRL_GROUP(SALT8),
+ ASPEED_PINCTRL_GROUP(SALT9),
+ ASPEED_PINCTRL_GROUP(SCL1),
+ ASPEED_PINCTRL_GROUP(SCL2),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SDA1),
+ ASPEED_PINCTRL_GROUP(SDA2),
+ ASPEED_PINCTRL_GROUP(SGPS1),
+ ASPEED_PINCTRL_GROUP(SGPS2),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
+ ASPEED_PINCTRL_GROUP(SIOPBI),
+ ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1CS1),
ASPEED_PINCTRL_GROUP(SPI1DEBUG),
ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPI2CK),
+ ASPEED_PINCTRL_GROUP(SPI2CS0),
+ ASPEED_PINCTRL_GROUP(SPI2CS1),
+ ASPEED_PINCTRL_GROUP(SPI2MISO),
+ ASPEED_PINCTRL_GROUP(SPI2MOSI),
+ ASPEED_PINCTRL_GROUP(TIMER3),
ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
+ ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
+ ASPEED_PINCTRL_GROUP(TXD3),
+ ASPEED_PINCTRL_GROUP(TXD4),
+ ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
ASPEED_PINCTRL_GROUP(VGABIOSROM),
+ ASPEED_PINCTRL_GROUP(VGAHS),
+ ASPEED_PINCTRL_GROUP(VGAVS),
+ ASPEED_PINCTRL_GROUP(VPI24),
+ ASPEED_PINCTRL_GROUP(VPO),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g5_functions[] = {
+ ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
+ ASPEED_PINCTRL_FUNC(BMCINT),
+ ASPEED_PINCTRL_FUNC(DDCCLK),
+ ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(ESPI),
+ ASPEED_PINCTRL_FUNC(FWSPICS1),
+ ASPEED_PINCTRL_FUNC(FWSPICS2),
ASPEED_PINCTRL_FUNC(GPID0),
ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
+ ASPEED_PINCTRL_FUNC(GPIE2),
+ ASPEED_PINCTRL_FUNC(GPIE4),
+ ASPEED_PINCTRL_FUNC(GPIE6),
ASPEED_PINCTRL_FUNC(I2C10),
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
@@ -786,11 +2164,50 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(I2C7),
ASPEED_PINCTRL_FUNC(I2C8),
ASPEED_PINCTRL_FUNC(I2C9),
+ ASPEED_PINCTRL_FUNC(LAD0),
+ ASPEED_PINCTRL_FUNC(LAD1),
+ ASPEED_PINCTRL_FUNC(LAD2),
+ ASPEED_PINCTRL_FUNC(LAD3),
+ ASPEED_PINCTRL_FUNC(LCLK),
+ ASPEED_PINCTRL_FUNC(LFRAME),
+ ASPEED_PINCTRL_FUNC(LPCHC),
+ ASPEED_PINCTRL_FUNC(LPCPD),
+ ASPEED_PINCTRL_FUNC(LPCPLUS),
+ ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
+ ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(LSIRQ),
ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
+ ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
+ ASPEED_PINCTRL_FUNC(NCTS3),
+ ASPEED_PINCTRL_FUNC(NCTS4),
+ ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
+ ASPEED_PINCTRL_FUNC(NDCD3),
+ ASPEED_PINCTRL_FUNC(NDCD4),
+ ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
+ ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
+ ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
+ ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
+ ASPEED_PINCTRL_FUNC(NRI3),
+ ASPEED_PINCTRL_FUNC(NRI4),
+ ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
+ ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(NRTS4),
ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PEWAKE),
+ ASPEED_PINCTRL_FUNC(PNOR),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -803,16 +2220,68 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
ASPEED_PINCTRL_FUNC(RMII2),
+ ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
+ ASPEED_PINCTRL_FUNC(RXD3),
+ ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT10),
+ ASPEED_PINCTRL_FUNC(SALT11),
+ ASPEED_PINCTRL_FUNC(SALT12),
+ ASPEED_PINCTRL_FUNC(SALT13),
+ ASPEED_PINCTRL_FUNC(SALT14),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
+ ASPEED_PINCTRL_FUNC(SALT5),
+ ASPEED_PINCTRL_FUNC(SALT6),
+ ASPEED_PINCTRL_FUNC(SALT7),
+ ASPEED_PINCTRL_FUNC(SALT8),
+ ASPEED_PINCTRL_FUNC(SALT9),
+ ASPEED_PINCTRL_FUNC(SCL1),
+ ASPEED_PINCTRL_FUNC(SCL2),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SDA1),
+ ASPEED_PINCTRL_FUNC(SDA2),
+ ASPEED_PINCTRL_FUNC(SGPS1),
+ ASPEED_PINCTRL_FUNC(SGPS2),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
+ ASPEED_PINCTRL_FUNC(SIOPBI),
+ ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1CS1),
ASPEED_PINCTRL_FUNC(SPI1DEBUG),
ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPI2CK),
+ ASPEED_PINCTRL_FUNC(SPI2CS0),
+ ASPEED_PINCTRL_FUNC(SPI2CS1),
+ ASPEED_PINCTRL_FUNC(SPI2MISO),
+ ASPEED_PINCTRL_FUNC(SPI2MOSI),
+ ASPEED_PINCTRL_FUNC(TIMER3),
ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
+ ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
+ ASPEED_PINCTRL_FUNC(TXD3),
+ ASPEED_PINCTRL_FUNC(TXD4),
+ ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
ASPEED_PINCTRL_FUNC(VGABIOSROM),
+ ASPEED_PINCTRL_FUNC(VGAHS),
+ ASPEED_PINCTRL_FUNC(VGAVS),
+ ASPEED_PINCTRL_FUNC(VPI24),
+ ASPEED_PINCTRL_FUNC(VPO),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g5_pinctrl_data = {
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 727728b86c07..f0dad016c9fd 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -260,6 +260,7 @@
#define SCUA0 0xA0 /* Multi-function Pin Control #7 */
#define SCUA4 0xA4 /* Multi-function Pin Control #8 */
#define SCUA8 0xA8 /* Multi-function Pin Control #9 */
+#define SCUAC 0xAC /* Multi-function Pin Control #10 */
#define HW_STRAP2 0xD0 /* Strapping */
/**
--
2.7.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6]
2016-11-02 14:37 ` [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6] Andrew Jeffery
@ 2016-11-03 22:59 ` Joel Stanley
2016-11-07 9:34 ` Linus Walleij
2016-11-07 9:32 ` Linus Walleij
1 sibling, 1 reply; 24+ messages in thread
From: Joel Stanley @ 2016-11-03 22:59 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Lee Jones, Linus Walleij, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Thu, Nov 3, 2016 at 1:07 AM, Andrew Jeffery <andrew@aj.id.au> wrote:
> If a pin depending on bit 6 in SCU90 is requested for GPIO, the export
> will succeed but changes to the GPIO's value will not be accepted by the
> hardware. This is because the pinmux driver has misconfigured the SCU by
> writing 1 to the reserved bit.
>
> The description of SCU90[6] from the datasheet is 'Reserved, must keep
> at value ”0”'. The fix is to switch pinmux from the bit-flipping macro
> to explicitly configuring the .enable and .disable values to zero.
>
> The patch has been tested on an AST2500 EVB.
>
> Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver)
> Reported-by: Uma Yadlapati <yadlapat@us.ibm.com>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
And tested-by.
> This patch should be applied for 4.9.
In the future I think we should send fixes separately from the rest of
the series, so it's clear to Linus where we expect patches to end up.
Perhaps Linus can share his preference with us?
Cheers,
Joel
> drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> index c8c72e8259d3..87b46390b695 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> @@ -26,7 +26,7 @@
>
> #define ASPEED_G5_NR_PINS 228
>
> -#define COND1 SIG_DESC_BIT(SCU90, 6, 0)
> +#define COND1 { SCU90, BIT(6), 0, 0 }
> #define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
>
> #define B14 0
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC)
2016-11-02 14:37 ` [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC) Andrew Jeffery
@ 2016-11-03 23:06 ` Joel Stanley
2016-11-04 3:45 ` Andrew Jeffery
2016-11-18 18:44 ` Lee Jones
1 sibling, 1 reply; 24+ messages in thread
From: Joel Stanley @ 2016-11-03 23:06 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Lee Jones, Linus Walleij, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Thu, Nov 3, 2016 at 1:07 AM, Andrew Jeffery <andrew@aj.id.au> wrote:
> The Aspeed LPC Host Controller is presented as a syscon device to
> arbitrate access by LPC and pinmux drivers. LPC pinmux configuration on
> fifth generation SoCs depends on bits in both the System Control Unit
> and the LPC Host Controller.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> new file mode 100644
> index 000000000000..792651488c3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> @@ -0,0 +1,17 @@
> +* Device tree bindings for the Aspeed LPC Host Controller (LPCHC)
I had to check the data sheet for that acronym. They call the
registers LHC. I somewhat prefer that name, but if you're happy with
it as-is then that's fine.
I assume this is not an issue on the g4/ast2400?
> +
> +The LPCHC registers configure LPC behaviour between the BMC and the host
> +system. The LPCHC also participates in pinmux requests on g5 SoCs and is
> +therefore considered a syscon device.
> +
> +Required properties:
> +- compatible: "aspeed,ast2500-lpchc", "syscon"
> +- reg: contains offset/length value of the LPCHC memory
> + region.
> +
> +Example:
> +
> +lpchc: lpchc@1e7890a0 {
> + compatible = "aspeed,ast2500-lpchc", "syscon";
> + reg = <0x1e7890a0 0xc4>;
Where's the 0xc4 come from? I can see 9 registers, which would mean
the length should be 0x24?
Cheers,
Joel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers
2016-11-02 14:37 ` [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers Andrew Jeffery
@ 2016-11-03 23:24 ` Joel Stanley
2016-11-04 3:59 ` Andrew Jeffery
2016-11-09 18:26 ` Rob Herring
1 sibling, 1 reply; 24+ messages in thread
From: Joel Stanley @ 2016-11-03 23:24 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Lee Jones, Linus Walleij, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Thu, Nov 3, 2016 at 1:07 AM, Andrew Jeffery <andrew@aj.id.au> wrote:
> The System Control Unit IP block in the Aspeed SoCs is typically where
> the pinmux configuration is found, but not always. A number of pins
> depend on state in one of LPC Host Control (LPCHC) or SoC Display
> Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
> means to adjust these as necessary.
>
> We use syscon to cast a regmap over the GFX and LPCHCR blocks, which is
> used as an arbitration layer between the relevant driver and the pinctrl
> subsystem. The regmaps are then exposed to the SoC-specific pinctrl
> drivers by phandles in the devicetree, and are selected during a mux
> request by querying a new 'ip' member in struct aspeed_sig_desc.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
I like this a lot more than the first go. Good work.
Some minor comments below.
> ---
> Since v1:
>
> The change is now proactive: instead of reporting that we need to flip bits in
> controllers we can't access, the patch provides access via regmaps for the
> relevant controllers. The implementation also splits out the IP block ID into
> its own variable rather than packing the value into the upper bits of the reg
> member of struct aspeed_sig_desc. This drives some churn in the diff, but I've
> tried to minimise it.
>
> .../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 50 +++++++++++++---
> drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +++---
> drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 39 ++++++++++---
> drivers/pinctrl/aspeed/pinctrl-aspeed.c | 66 +++++++++++++---------
> drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++++++++---
> 5 files changed, 144 insertions(+), 61 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> index 2ad18c4ea55c..115b0cce6c1c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> @@ -4,12 +4,19 @@ Aspeed Pin Controllers
> The Aspeed SoCs vary in functionality inside a generation but have a common mux
> device register layout.
>
> -Required properties:
> -- compatible : Should be any one of the following:
> - "aspeed,ast2400-pinctrl"
> - "aspeed,g4-pinctrl"
> - "aspeed,ast2500-pinctrl"
> - "aspeed,g5-pinctrl"
> +Required properties for g4:
> +- compatible : Should be any one of the following:
> + "aspeed,ast2400-pinctrl"
> + "aspeed,g4-pinctrl"
> +
> +Required properties for g5:
> +- compatible : Should be any one of the following:
> + "aspeed,ast2500-pinctrl"
> + "aspeed,g5-pinctrl"
> +
> +- aspeed,external-nodes: A cell of phandles to external controller nodes:
> + 0: compatible with "aspeed,ast2500-gfx", "syscon"
> + 1: compatible with "aspeed,ast2500-lpchc", "syscon"
>
> The pin controller node should be a child of a syscon node with the required
> property:
> @@ -47,7 +54,7 @@ RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
> TIMER7 TIMER8 VGABIOSROM
>
>
> -Examples:
> +g4 Example:
>
> syscon: scu@1e6e2000 {
> compatible = "syscon", "simple-mfd";
> @@ -63,5 +70,34 @@ syscon: scu@1e6e2000 {
> };
> };
>
> +g5 Example:
> +
> +apb {
> + gfx: display@1e6e6000 {
> + compatible = "aspeed,ast2500-gfx", "syscon";
> + reg = <0x1e6e6000 0x1000>;
> + };
> +
> + lpchc: lpchc@1e7890a0 {
> + compatible = "aspeed,ast2500-lpchc", "syscon";
> + reg = <0x1e7890a0 0xc4>;
> + };
> +
> + syscon: scu@1e6e2000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1e6e2000 0x1a8>;
> +
> + pinctrl: pinctrl {
> + compatible = "aspeed,g5-pinctrl";
> + aspeed,external-nodes = <&gfx, &lpchc>;
> +
> + pinctrl_i2c3_default: i2c3_default {
> + function = "I2C3";
> + groups = "I2C3";
> + };
> + };
> + };
> +};
> +
> Please refer to pinctrl-bindings.txt in this directory for details of the
> common pinctrl bindings used by client devices.
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
> index a21b071ff290..558bd102416c 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
> @@ -292,7 +292,7 @@ SSSF_PIN_DECL(U18, GPIOG7, FLWP, SIG_DESC_SET(SCU84, 7));
> #define UART6_DESC SIG_DESC_SET(SCU90, 7)
> #define ROM16_DESC SIG_DESC_SET(SCU90, 6)
> #define FLASH_WIDE SIG_DESC_SET(HW_STRAP1, 4)
> -#define BOOT_SRC_NOR { HW_STRAP1, GENMASK(1, 0), 0, 0 }
> +#define BOOT_SRC_NOR { ASPEED_IP_SCU, HW_STRAP1, GENMASK(1, 0), 0, 0 }
>
> #define A8 56
> SIG_EXPR_DECL(ROMD8, ROM16, ROM16_DESC);
> @@ -418,9 +418,9 @@ FUNC_GROUP_DECL(I2C8, G5, F3);
> #define U1 88
> SSSF_PIN_DECL(U1, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
>
> -#define VPI18_DESC { SCU90, GENMASK(5, 4), 1, 0 }
> -#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
> -#define VPI30_DESC { SCU90, GENMASK(5, 4), 3, 0 }
> +#define VPI18_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
> +#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
> +#define VPI30_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
>
> #define T5 89
> #define T5_DESC SIG_DESC_SET(SCU84, 17)
> @@ -641,11 +641,11 @@ SSSF_PIN_DECL(Y22, GPIOR2, ROMCS3, SIG_DESC_SET(SCU88, 26));
> #define U19 139
> SSSF_PIN_DECL(U19, GPIOR3, ROMCS4, SIG_DESC_SET(SCU88, 27));
>
> -#define VPOOFF0_DESC { SCU94, GENMASK(1, 0), 0, 0 }
> -#define VPO12_DESC { SCU94, GENMASK(1, 0), 1, 0 }
> -#define VPO24_DESC { SCU94, GENMASK(1, 0), 2, 0 }
> -#define VPOOFF1_DESC { SCU94, GENMASK(1, 0), 3, 0 }
> -#define VPO_OFF_12 { SCU94, 0x2, 0, 0 }
> +#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
> +#define VPO12_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
> +#define VPO24_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
> +#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
> +#define VPO_OFF_12 { ASPEED_IP_SCU, SCU94, 0x2, 0, 0 }
> #define VPO_24_OFF SIG_DESC_SET(SCU94, 1)
>
> #define V21 140
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> index 87b46390b695..99c4fa9bf861 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> @@ -10,6 +10,7 @@
> #include <linux/init.h>
> #include <linux/io.h>
> #include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/mutex.h>
> #include <linux/of.h>
> #include <linux/platform_device.h>
> @@ -26,8 +27,8 @@
>
> #define ASPEED_G5_NR_PINS 228
>
> -#define COND1 { SCU90, BIT(6), 0, 0 }
> -#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
> +#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
> +#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
>
> #define B14 0
> SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
> @@ -186,9 +187,12 @@ MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
>
> FUNC_GROUP_DECL(GPIE0, B20, C20);
>
> -#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
> -#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
> -#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
> +#define SPI1_DESC \
> + { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
> +#define SPI1DEBUG_DESC \
> + { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
> +#define SPI1PASSTHRU_DESC \
> + { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
>
> #define C18 64
> SIG_EXPR_DECL(SYSCS, SPI1DEBUG, COND1, SPI1DEBUG_DESC);
> @@ -325,10 +329,11 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
>
> FUNC_GROUP_DECL(I2C8, P2, R1);
>
> -#define VPIOFF0_DESC { SCU90, GENMASK(5, 4), 0, 0 }
> -#define VPIOFF1_DESC { SCU90, GENMASK(5, 4), 1, 0 }
> -#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
> -#define VPIRSVD_DESC { SCU90, GENMASK(5, 4), 3, 0 }
> +#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
> +#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
> +#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
> +#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
> +
>
> #define V2 104
> #define V2_DESC SIG_DESC_SET(SCU88, 0)
> @@ -848,10 +853,26 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
> static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
> {
> int i;
> + struct regmap **map;
> + struct device_node *node;
>
> for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++)
> aspeed_g5_pins[i].number = i;
>
> + map = &aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX];
> + node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0);
> + *map = syscon_node_to_regmap(node);
I think you can use syscon_regmap_lookup_by_phandle to replace both of
these lines.
> + of_node_put(node);
> + if (IS_ERR(*map))
> + return PTR_ERR(*map);
Do we want to fail, or warn and continue?
The sequence is a bit messy. How about:
struct regmap *map;
map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"aspeed,external-nodes");
if (IS_ERR(map))
return PTR_ERR(map);
aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX] = map;
> +
> + map = &aspeed_g5_pinctrl_data.maps[ASPEED_IP_LPCHC];
> + node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1);
> + *map = syscon_node_to_regmap(node);
> + of_node_put(node);
> + if (IS_ERR(*map))
> + return PTR_ERR(*map);
> +
Same comments as above.
> return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc,
> &aspeed_g5_pinctrl_data);
> }
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> index 49aeba912531..23586aac7a5a 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> @@ -14,6 +14,12 @@
> #include "../core.h"
> #include "pinctrl-aspeed.h"
>
> +static const char *const aspeed_pinmux_ips[] = {
> + [ASPEED_IP_SCU] = "SCU",
> + [ASPEED_IP_GFX] = "GFX",
> + [ASPEED_IP_LPCHC] = "LHCR",
We've got both LPCHC and LHCR here. As I said when commenting on the
regmap bindings, I like LHC(R) better.
> +};
> +
> int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
> {
> struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
> @@ -78,7 +84,8 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
> static inline void aspeed_sig_desc_print_val(
> const struct aspeed_sig_desc *desc, bool enable, u32 rv)
What's a rv? Perhaps "reg" or "value"?
> {
> - pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
> + pr_debug("Want %s%X[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
> + aspeed_pinmux_ips[desc->ip], desc->reg,
> desc->mask, enable ? desc->enable : desc->disable,
> (rv & desc->mask) >> __ffs(desc->mask), rv);
> }
> @@ -88,7 +95,7 @@ static inline void aspeed_sig_desc_print_val(
> *
> * @desc: The signal descriptor of interest
> * @enabled: True to query the enabled state, false to query disabled state
> - * @regmap: The SCU regmap instance
> + * @regmap: The IP block's regmap instance
> *
> * @return True if the descriptor's bitfield is configured to the state
> * selected by @enabled, false otherwise
> @@ -119,7 +126,7 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
> *
> * @expr: An expression controlling the signal for a mux function on a pin
> * @enabled: True to query the enabled state, false to query disabled state
> - * @regmap: The SCU regmap instance
> + * @maps: The list of regmap instances
> *
> * @return True if the expression composed by @enabled evaluates true, false
> * otherwise
> @@ -136,15 +143,16 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
> * either condition as required.
> */
> static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
> - bool enabled, struct regmap *map)
> + bool enabled, struct regmap * const *maps)
> {
> int i;
>
> for (i = 0; i < expr->ndescs; i++) {
> const struct aspeed_sig_desc *desc = &expr->descs[i];
>
> - if (!aspeed_sig_desc_eval(desc, enabled, map))
> + if (!aspeed_sig_desc_eval(desc, enabled, maps[desc->ip]))
> return false;
> +
> }
>
> return true;
> @@ -158,12 +166,12 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
> * configured
> * @enable: true to enable an function's signal through a pin's signal
> * expression, false to disable the function's signal
> - * @map: The SCU's regmap instance for pinmux register access.
> + * @maps: The list of regmap instances for pinmux register access.
> *
> * @return true if the expression is configured as requested, false otherwise
> */
> static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
> - bool enable, struct regmap *map)
> + bool enable, struct regmap * const *maps)
> {
> int i;
>
> @@ -171,6 +179,7 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
> bool ret;
> const struct aspeed_sig_desc *desc = &expr->descs[i];
> u32 pattern = enable ? desc->enable : desc->disable;
> + u32 val = (pattern << __ffs(desc->mask));
>
> /*
> * Strap registers are configured in hardware or by early-boot
> @@ -179,48 +188,49 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
> * deconfigured and is the reason we re-evaluate after writing
> * all descriptor bits.
> */
> - if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
> + if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
> + desc->ip == ASPEED_IP_SCU)
> continue;
>
> - ret = regmap_update_bits(map, desc->reg, desc->mask,
> - pattern << __ffs(desc->mask)) == 0;
> + ret = regmap_update_bits(maps[desc->ip], desc->reg,
> + desc->mask, val) == 0;
>
> if (!ret)
> return ret;
> }
>
> - return aspeed_sig_expr_eval(expr, enable, map);
> + return aspeed_sig_expr_eval(expr, enable, maps);
> }
>
> static bool aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
> - struct regmap *map)
> + struct regmap * const *maps)
> {
> - if (aspeed_sig_expr_eval(expr, true, map))
> + if (aspeed_sig_expr_eval(expr, true, maps))
> return true;
>
> - return aspeed_sig_expr_set(expr, true, map);
> + return aspeed_sig_expr_set(expr, true, maps);
> }
>
> static bool aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
> - struct regmap *map)
> + struct regmap * const *maps)
> {
> - if (!aspeed_sig_expr_eval(expr, true, map))
> + if (!aspeed_sig_expr_eval(expr, true, maps))
> return true;
>
> - return aspeed_sig_expr_set(expr, false, map);
> + return aspeed_sig_expr_set(expr, false, maps);
> }
>
> /**
> * Disable a signal on a pin by disabling all provided signal expressions.
> *
> * @exprs: The list of signal expressions (from a priority level on a pin)
> - * @map: The SCU's regmap instance for pinmux register access.
> + * @maps: The list of regmap instances for pinmux register access.
> *
> * @return true if all expressions in the list are successfully disabled, false
> * otherwise
> */
> static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
> - struct regmap *map)
> + struct regmap * const *maps)
> {
> bool disabled = true;
>
> @@ -230,7 +240,7 @@ static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
> while (*exprs) {
> bool ret;
>
> - ret = aspeed_sig_expr_disable(*exprs, map);
> + ret = aspeed_sig_expr_disable(*exprs, maps);
> disabled = disabled && ret;
>
> exprs++;
> @@ -343,6 +353,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
> const struct aspeed_sig_expr **funcs;
> const struct aspeed_sig_expr ***prios;
>
> + pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
> +
> if (!pdesc)
> return -EINVAL;
>
> @@ -358,7 +370,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
> if (expr)
> break;
>
> - if (!aspeed_disable_sig(funcs, pdata->map))
> + if (!aspeed_disable_sig(funcs, pdata->maps))
> return -EPERM;
>
> prios++;
> @@ -377,7 +389,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
> return -ENXIO;
> }
>
> - if (!aspeed_sig_expr_enable(expr, pdata->map))
> + if (!aspeed_sig_expr_enable(expr, pdata->maps))
> return -EPERM;
> }
>
> @@ -432,7 +444,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
> if (aspeed_gpio_in_exprs(funcs))
> break;
>
> - if (!aspeed_disable_sig(funcs, pdata->map))
> + if (!aspeed_disable_sig(funcs, pdata->maps))
> return -EPERM;
>
> prios++;
> @@ -462,7 +474,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
> * If GPIO is not the lowest priority signal type, assume there is only
> * one expression defined to enable the GPIO function
> */
> - if (!aspeed_sig_expr_enable(expr, pdata->map))
> + if (!aspeed_sig_expr_enable(expr, pdata->maps))
> return -EPERM;
>
> return 0;
> @@ -481,10 +493,10 @@ int aspeed_pinctrl_probe(struct platform_device *pdev,
> return -ENODEV;
> }
>
> - pdata->map = syscon_node_to_regmap(parent->of_node);
> - if (IS_ERR(pdata->map)) {
> + pdata->maps[ASPEED_IP_SCU] = syscon_node_to_regmap(parent->of_node);
> + if (IS_ERR(pdata->maps[ASPEED_IP_SCU])) {
> dev_err(&pdev->dev, "No regmap for syscon pincontroller parent\n");
> - return PTR_ERR(pdata->map);
> + return PTR_ERR(pdata->maps[ASPEED_IP_SCU]);
> }
>
> pctl = pinctrl_register(pdesc, &pdev->dev, pdata);
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> index 3e72ef8c54bf..727728b86c07 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> @@ -232,6 +232,11 @@
> * group.
> */
>
> +#define ASPEED_IP_SCU 0
> +#define ASPEED_IP_GFX 1
> +#define ASPEED_IP_LPCHC 2
> +#define ASPEED_NR_PINMUX_IPS 3
> +
> /*
> * The "Multi-function Pins Mapping and Control" table in the SoC datasheet
> * references registers by the device/offset mnemonic. The register macros
> @@ -261,7 +266,9 @@
> * A signal descriptor, which describes the register, bits and the
> * enable/disable values that should be compared or written.
> *
> - * @reg: The register offset from base in bytes
> + * @ip: The IP block identifier, used as an index into the regmap array in
> + * struct aspeed_pinctrl_data
> + * @reg: The register offset with respect to the base address of the IP block
> * @mask: The mask to apply to the register. The lowest set bit of the mask is
> * used to derive the shift value.
> * @enable: The value that enables the function. Value should be in the LSBs,
> @@ -270,6 +277,7 @@
> * LSBs, not at the position of the mask.
> */
> struct aspeed_sig_desc {
> + unsigned int ip;
> unsigned int reg;
> u32 mask;
> u32 enable;
> @@ -313,24 +321,30 @@ struct aspeed_pin_desc {
>
> /* Macro hell */
>
> +#define SIG_DESC_IP_BIT(ip, reg, idx, val) \
> + { ip, reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
> +
> /**
> - * Short-hand macro for describing a configuration enabled by the state of one
> - * bit. The disable value is derived.
> + * Short-hand macro for describing an SCU descriptor enabled by the state of
> + * one bit. The disable value is derived.
> *
> * @reg: The signal's associated register, offset from base
> * @idx: The signal's bit index in the register
> * @val: The value (0 or 1) that enables the function
> */
> #define SIG_DESC_BIT(reg, idx, val) \
> - { reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
> + SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, val)
> +
> +#define SIG_DESC_IP_SET(ip, reg, idx) SIG_DESC_IP_BIT(ip, reg, idx, 1)
>
> /**
> - * A further short-hand macro describing a configuration enabled with a set bit.
> + * A further short-hand macro expanding to an SCU descriptor enabled by a set
> + * bit.
> *
> - * @reg: The configuration's associated register, offset from base
> - * @idx: The configuration's bit index in the register
> + * @reg: The register, offset from base
> + * @idx: The bit index in the register
> */
> -#define SIG_DESC_SET(reg, idx) SIG_DESC_BIT(reg, idx, 1)
> +#define SIG_DESC_SET(reg, idx) SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, 1)
>
> #define SIG_DESC_LIST_SYM(sig, func) sig_descs_ ## sig ## _ ## func
> #define SIG_DESC_LIST_DECL(sig, func, ...) \
> @@ -500,7 +514,7 @@ struct aspeed_pin_desc {
> MS_PIN_DECL_(pin, SIG_EXPR_LIST_PTR(gpio))
>
> struct aspeed_pinctrl_data {
> - struct regmap *map;
> + struct regmap *maps[ASPEED_NR_PINMUX_IPS];
>
> const struct pinctrl_pin_desc *pins;
> const unsigned int npins;
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC)
2016-11-03 23:06 ` Joel Stanley
@ 2016-11-04 3:45 ` Andrew Jeffery
0 siblings, 0 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-04 3:45 UTC (permalink / raw)
To: Joel Stanley
Cc: Lee Jones, Linus Walleij, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
[-- Attachment #1: Type: text/plain, Size: 2671 bytes --]
On Fri, 2016-11-04 at 09:36 +1030, Joel Stanley wrote:
> On Thu, Nov 3, 2016 at 1:07 AM, Andrew Jeffery <andrew@aj.id.au> wrote:
> >
> > The Aspeed LPC Host Controller is presented as a syscon device to
> > arbitrate access by LPC and pinmux drivers. LPC pinmux configuration on
> > fifth generation SoCs depends on bits in both the System Control Unit
> > and the LPC Host Controller.
> >
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> > ---
> > Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> > new file mode 100644
> > index 000000000000..792651488c3d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> > @@ -0,0 +1,17 @@
> > +* Device tree bindings for the Aspeed LPC Host Controller (LPCHC)
> I had to check the data sheet for that acronym. They call the
> registers LHC. I somewhat prefer that name, but if you're happy with
> it as-is then that's fine.
I had an internal debate about this. I figured LPCHC might give a bit
more context to the acronym. I'm not unhappy with it but I wouldn't
claim I'm happy either. I will change it to LHC since you somewhat
prefer it, and it better aligns with the datasheet.
>
> I assume this is not an issue on the g4/ast2400?
Correct, we don't have the issue of pinmux needing to reach into the
LPC IO space on the AST2400. I don't think we've had anything else to
drive us to looking at the host controller space there, so I wasn't
going to add it to the bindings yet.
>
> >
> > +
> > +The LPCHC registers configure LPC behaviour between the BMC and the host
> > +system. The LPCHC also participates in pinmux requests on g5 SoCs and is
> > +therefore considered a syscon device.
> > +
> > +Required properties:
> > +- compatible: "aspeed,ast2500-lpchc", "syscon"
> > +- reg: contains offset/length value of the LPCHC memory
> > + region.
> > +
> > +Example:
> > +
> > +lpchc: lpchc@1e7890a0 {
> > + compatible = "aspeed,ast2500-lpchc", "syscon";
> > + reg = <0x1e7890a0 0xc4>;
> Where's the 0xc4 come from? I can see 9 registers, which would mean
> the length should be 0x24?
Yes, it should be 0x24. I can't even claim that 'c' is near '2'. Thanks
for catching that.
Andrew
>
> Cheers,
>
> Joel
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers
2016-11-03 23:24 ` Joel Stanley
@ 2016-11-04 3:59 ` Andrew Jeffery
0 siblings, 0 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-04 3:59 UTC (permalink / raw)
To: Joel Stanley
Cc: Lee Jones, Linus Walleij, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
[-- Attachment #1: Type: text/plain, Size: 27669 bytes --]
On Fri, 2016-11-04 at 09:54 +1030, Joel Stanley wrote:
> On Thu, Nov 3, 2016 at 1:07 AM, Andrew Jeffery <andrew@aj.id.au> wrote:
> >
> > The System Control Unit IP block in the Aspeed SoCs is typically where
> > the pinmux configuration is found, but not always. A number of pins
> > depend on state in one of LPC Host Control (LPCHC) or SoC Display
> > Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
> > means to adjust these as necessary.
> >
> > We use syscon to cast a regmap over the GFX and LPCHCR blocks, which is
> > used as an arbitration layer between the relevant driver and the pinctrl
> > subsystem. The regmaps are then exposed to the SoC-specific pinctrl
> > drivers by phandles in the devicetree, and are selected during a mux
> > request by querying a new 'ip' member in struct aspeed_sig_desc.
> >
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> I like this a lot more than the first go. Good work.
>
> Some minor comments below.
>
> >
> > ---
> > Since v1:
> >
> > The change is now proactive: instead of reporting that we need to flip bits in
> > controllers we can't access, the patch provides access via regmaps for the
> > relevant controllers. The implementation also splits out the IP block ID into
> > its own variable rather than packing the value into the upper bits of the reg
> > member of struct aspeed_sig_desc. This drives some churn in the diff, but I've
> > tried to minimise it.
> >
> > .../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 50 +++++++++++++---
> > drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +++---
> > drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 39 ++++++++++---
> > drivers/pinctrl/aspeed/pinctrl-aspeed.c | 66 +++++++++++++---------
> > drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++++++++---
> > 5 files changed, 144 insertions(+), 61 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > index 2ad18c4ea55c..115b0cce6c1c 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > @@ -4,12 +4,19 @@ Aspeed Pin Controllers
> > The Aspeed SoCs vary in functionality inside a generation but have a common mux
> > device register layout.
> >
> > -Required properties:
> > -- compatible : Should be any one of the following:
> > - "aspeed,ast2400-pinctrl"
> > - "aspeed,g4-pinctrl"
> > - "aspeed,ast2500-pinctrl"
> > - "aspeed,g5-pinctrl"
> > +Required properties for g4:
> > +- compatible : Should be any one of the following:
> > + "aspeed,ast2400-pinctrl"
> > + "aspeed,g4-pinctrl"
> > +
> > +Required properties for g5:
> > +- compatible : Should be any one of the following:
> > + "aspeed,ast2500-pinctrl"
> > + "aspeed,g5-pinctrl"
> > +
> > +- aspeed,external-nodes: A cell of phandles to external controller nodes:
> > + 0: compatible with "aspeed,ast2500-gfx", "syscon"
> > + 1: compatible with "aspeed,ast2500-lpchc", "syscon"
> >
> > The pin controller node should be a child of a syscon node with the required
> > property:
> > @@ -47,7 +54,7 @@ RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
> > TIMER7 TIMER8 VGABIOSROM
> >
> >
> > -Examples:
> > +g4 Example:
> >
> > syscon: scu@1e6e2000 {
> > compatible = "syscon", "simple-mfd";
> > @@ -63,5 +70,34 @@ syscon: scu@1e6e2000 {
> > };
> > };
> >
> > +g5 Example:
> > +
> > +apb {
> > + gfx: display@1e6e6000 {
> > + compatible = "aspeed,ast2500-gfx", "syscon";
> > + reg = <0x1e6e6000 0x1000>;
> > + };
> > +
> > + lpchc: lpchc@1e7890a0 {
> > + compatible = "aspeed,ast2500-lpchc", "syscon";
> > + reg = <0x1e7890a0 0xc4>;
> > + };
> > +
> > + syscon: scu@1e6e2000 {
> > + compatible = "syscon", "simple-mfd";
> > + reg = <0x1e6e2000 0x1a8>;
> > +
> > + pinctrl: pinctrl {
> > + compatible = "aspeed,g5-pinctrl";
> > + aspeed,external-nodes = <&gfx, &lpchc>;
> > +
> > + pinctrl_i2c3_default: i2c3_default {
> > + function = "I2C3";
> > + groups = "I2C3";
> > + };
> > + };
> > + };
> > +};
> > +
> > Please refer to pinctrl-bindings.txt in this directory for details of the
> > common pinctrl bindings used by client devices.
> > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
> > index a21b071ff290..558bd102416c 100644
> > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
> > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
> > @@ -292,7 +292,7 @@ SSSF_PIN_DECL(U18, GPIOG7, FLWP, SIG_DESC_SET(SCU84, 7));
> > #define UART6_DESC SIG_DESC_SET(SCU90, 7)
> > #define ROM16_DESC SIG_DESC_SET(SCU90, 6)
> > #define FLASH_WIDE SIG_DESC_SET(HW_STRAP1, 4)
> > -#define BOOT_SRC_NOR { HW_STRAP1, GENMASK(1, 0), 0, 0 }
> > +#define BOOT_SRC_NOR { ASPEED_IP_SCU, HW_STRAP1, GENMASK(1, 0), 0, 0 }
> >
> > #define A8 56
> > SIG_EXPR_DECL(ROMD8, ROM16, ROM16_DESC);
> > @@ -418,9 +418,9 @@ FUNC_GROUP_DECL(I2C8, G5, F3);
> > #define U1 88
> > SSSF_PIN_DECL(U1, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
> >
> > -#define VPI18_DESC { SCU90, GENMASK(5, 4), 1, 0 }
> > -#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
> > -#define VPI30_DESC { SCU90, GENMASK(5, 4), 3, 0 }
> > +#define VPI18_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
> > +#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
> > +#define VPI30_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
> >
> > #define T5 89
> > #define T5_DESC SIG_DESC_SET(SCU84, 17)
> > @@ -641,11 +641,11 @@ SSSF_PIN_DECL(Y22, GPIOR2, ROMCS3, SIG_DESC_SET(SCU88, 26));
> > #define U19 139
> > SSSF_PIN_DECL(U19, GPIOR3, ROMCS4, SIG_DESC_SET(SCU88, 27));
> >
> > -#define VPOOFF0_DESC { SCU94, GENMASK(1, 0), 0, 0 }
> > -#define VPO12_DESC { SCU94, GENMASK(1, 0), 1, 0 }
> > -#define VPO24_DESC { SCU94, GENMASK(1, 0), 2, 0 }
> > -#define VPOOFF1_DESC { SCU94, GENMASK(1, 0), 3, 0 }
> > -#define VPO_OFF_12 { SCU94, 0x2, 0, 0 }
> > +#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
> > +#define VPO12_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
> > +#define VPO24_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
> > +#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
> > +#define VPO_OFF_12 { ASPEED_IP_SCU, SCU94, 0x2, 0, 0 }
> > #define VPO_24_OFF SIG_DESC_SET(SCU94, 1)
> >
> > #define V21 140
> > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> > index 87b46390b695..99c4fa9bf861 100644
> > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
> > @@ -10,6 +10,7 @@
> > #include
> > #include
> > #include
> > +#include
> > #include
> > #include
> > #include
> > @@ -26,8 +27,8 @@
> >
> > #define ASPEED_G5_NR_PINS 228
> >
> > -#define COND1 { SCU90, BIT(6), 0, 0 }
> > -#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
> > +#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
> > +#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
> >
> > #define B14 0
> > SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
> > @@ -186,9 +187,12 @@ MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
> >
> > FUNC_GROUP_DECL(GPIE0, B20, C20);
> >
> > -#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
> > -#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
> > -#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
> > +#define SPI1_DESC \
> > + { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
> > +#define SPI1DEBUG_DESC \
> > + { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
> > +#define SPI1PASSTHRU_DESC \
> > + { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
> >
> > #define C18 64
> > SIG_EXPR_DECL(SYSCS, SPI1DEBUG, COND1, SPI1DEBUG_DESC);
> > @@ -325,10 +329,11 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
> >
> > FUNC_GROUP_DECL(I2C8, P2, R1);
> >
> > -#define VPIOFF0_DESC { SCU90, GENMASK(5, 4), 0, 0 }
> > -#define VPIOFF1_DESC { SCU90, GENMASK(5, 4), 1, 0 }
> > -#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
> > -#define VPIRSVD_DESC { SCU90, GENMASK(5, 4), 3, 0 }
> > +#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
> > +#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
> > +#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
> > +#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
> > +
> >
> > #define V2 104
> > #define V2_DESC SIG_DESC_SET(SCU88, 0)
> > @@ -848,10 +853,26 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
> > static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
> > {
> > int i;
> > + struct regmap **map;
> > + struct device_node *node;
> >
> > for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++)
> > aspeed_g5_pins[i].number = i;
> >
> > + map = &aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX];
> > + node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0);
> > + *map = syscon_node_to_regmap(node);
> I think you can use syscon_regmap_lookup_by_phandle to replace both of
> these lines.
Good call, will do.
>
> >
> > + of_node_put(node);
> > + if (IS_ERR(*map))
> > + return PTR_ERR(*map);
> Do we want to fail, or warn and continue?
We would need to add further checks to defend against null dereferences
if we were to continue. I think the broken devicetree should be fixed.
>
> The sequence is a bit messy. How about:
>
> struct regmap *map;
>
> map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> "aspeed,external-nodes");
> if (IS_ERR(map))
> return PTR_ERR(map);
>
> aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX] = map;
That looks neater, I will switch.
>
>
> >
> > +
> > + map = &aspeed_g5_pinctrl_data.maps[ASPEED_IP_LPCHC];
> > + node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1);
> > + *map = syscon_node_to_regmap(node);
> > + of_node_put(node);
> > + if (IS_ERR(*map))
> > + return PTR_ERR(*map);
> > +
> Same comments as above.
Ack.
>
> >
> > return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc,
> > &aspeed_g5_pinctrl_data);
> > }
> > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> > index 49aeba912531..23586aac7a5a 100644
> > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
> > @@ -14,6 +14,12 @@
> > #include "../core.h"
> > #include "pinctrl-aspeed.h"
> >
> > +static const char *const aspeed_pinmux_ips[] = {
> > + [ASPEED_IP_SCU] = "SCU",
> > + [ASPEED_IP_GFX] = "GFX",
> > + [ASPEED_IP_LPCHC] = "LHCR",
> We've got both LPCHC and LHCR here. As I said when commenting on the
> regmap bindings, I like LHC(R) better.
>
> >
> > +};
> > +
> > int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
> > {
> > struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
> > @@ -78,7 +84,8 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
> > static inline void aspeed_sig_desc_print_val(
> > const struct aspeed_sig_desc *desc, bool enable, u32 rv)
> What's a rv? Perhaps "reg" or "value"?
>
> >
> > {
> > - pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
> > + pr_debug("Want %s%X[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
> > + aspeed_pinmux_ips[desc->ip], desc->reg,
> > desc->mask, enable ? desc->enable : desc->disable,
> > (rv & desc->mask) >> __ffs(desc->mask), rv);
> > }
> > @@ -88,7 +95,7 @@ static inline void aspeed_sig_desc_print_val(
> > *
> > * @desc: The signal descriptor of interest
> > * @enabled: True to query the enabled state, false to query disabled state
> > - * @regmap: The SCU regmap instance
> > + * @regmap: The IP block's regmap instance
> > *
> > * @return True if the descriptor's bitfield is configured to the state
> > * selected by @enabled, false otherwise
> > @@ -119,7 +126,7 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
> > *
> > * @expr: An expression controlling the signal for a mux function on a pin
> > * @enabled: True to query the enabled state, false to query disabled state
> > - * @regmap: The SCU regmap instance
> > + * @maps: The list of regmap instances
> > *
> > * @return True if the expression composed by @enabled evaluates true, false
> > * otherwise
> > @@ -136,15 +143,16 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
> > * either condition as required.
> > */
> > static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
> > - bool enabled, struct regmap *map)
> > + bool enabled, struct regmap * const *maps)
> > {
> > int i;
> >
> > for (i = 0; i < expr->ndescs; i++) {
> > const struct aspeed_sig_desc *desc = &expr->descs[i];
> >
> > - if (!aspeed_sig_desc_eval(desc, enabled, map))
> > + if (!aspeed_sig_desc_eval(desc, enabled, maps[desc->ip]))
> > return false;
> > +
> > }
> >
> > return true;
> > @@ -158,12 +166,12 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
> > * configured
> > * @enable: true to enable an function's signal through a pin's signal
> > * expression, false to disable the function's signal
> > - * @map: The SCU's regmap instance for pinmux register access.
> > + * @maps: The list of regmap instances for pinmux register access.
> > *
> > * @return true if the expression is configured as requested, false otherwise
> > */
> > static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
> > - bool enable, struct regmap *map)
> > + bool enable, struct regmap * const *maps)
> > {
> > int i;
> >
> > @@ -171,6 +179,7 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
> > bool ret;
> > const struct aspeed_sig_desc *desc = &expr->descs[i];
> > u32 pattern = enable ? desc->enable : desc->disable;
> > + u32 val = (pattern << __ffs(desc->mask));
> >
> > /*
> > * Strap registers are configured in hardware or by early-boot
> > @@ -179,48 +188,49 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
> > * deconfigured and is the reason we re-evaluate after writing
> > * all descriptor bits.
> > */
> > - if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
> > + if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
> > + desc->ip == ASPEED_IP_SCU)
> > continue;
> >
> > - ret = regmap_update_bits(map, desc->reg, desc->mask,
> > - pattern << __ffs(desc->mask)) == 0;
> > + ret = regmap_update_bits(maps[desc->ip], desc->reg,
> > + desc->mask, val) == 0;
> >
> > if (!ret)
> > return ret;
> > }
> >
> > - return aspeed_sig_expr_eval(expr, enable, map);
> > + return aspeed_sig_expr_eval(expr, enable, maps);
> > }
> >
> > static bool aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
> > - struct regmap *map)
> > + struct regmap * const *maps)
> > {
> > - if (aspeed_sig_expr_eval(expr, true, map))
> > + if (aspeed_sig_expr_eval(expr, true, maps))
> > return true;
> >
> > - return aspeed_sig_expr_set(expr, true, map);
> > + return aspeed_sig_expr_set(expr, true, maps);
> > }
> >
> > static bool aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
> > - struct regmap *map)
> > + struct regmap * const *maps)
> > {
> > - if (!aspeed_sig_expr_eval(expr, true, map))
> > + if (!aspeed_sig_expr_eval(expr, true, maps))
> > return true;
> >
> > - return aspeed_sig_expr_set(expr, false, map);
> > + return aspeed_sig_expr_set(expr, false, maps);
> > }
> >
> > /**
> > * Disable a signal on a pin by disabling all provided signal expressions.
> > *
> > * @exprs: The list of signal expressions (from a priority level on a pin)
> > - * @map: The SCU's regmap instance for pinmux register access.
> > + * @maps: The list of regmap instances for pinmux register access.
> > *
> > * @return true if all expressions in the list are successfully disabled, false
> > * otherwise
> > */
> > static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
> > - struct regmap *map)
> > + struct regmap * const *maps)
> > {
> > bool disabled = true;
> >
> > @@ -230,7 +240,7 @@ static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
> > while (*exprs) {
> > bool ret;
> >
> > - ret = aspeed_sig_expr_disable(*exprs, map);
> > + ret = aspeed_sig_expr_disable(*exprs, maps);
> > disabled = disabled && ret;
> >
> > exprs++;
> > @@ -343,6 +353,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
> > const struct aspeed_sig_expr **funcs;
> > const struct aspeed_sig_expr ***prios;
> >
> > + pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
> > +
> > if (!pdesc)
> > return -EINVAL;
> >
> > @@ -358,7 +370,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
> > if (expr)
> > break;
> >
> > - if (!aspeed_disable_sig(funcs, pdata->map))
> > + if (!aspeed_disable_sig(funcs, pdata->maps))
> > return -EPERM;
> >
> > prios++;
> > @@ -377,7 +389,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
> > return -ENXIO;
> > }
> >
> > - if (!aspeed_sig_expr_enable(expr, pdata->map))
> > + if (!aspeed_sig_expr_enable(expr, pdata->maps))
> > return -EPERM;
> > }
> >
> > @@ -432,7 +444,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
> > if (aspeed_gpio_in_exprs(funcs))
> > break;
> >
> > - if (!aspeed_disable_sig(funcs, pdata->map))
> > + if (!aspeed_disable_sig(funcs, pdata->maps))
> > return -EPERM;
> >
> > prios++;
> > @@ -462,7 +474,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
> > * If GPIO is not the lowest priority signal type, assume there is only
> > * one expression defined to enable the GPIO function
> > */
> > - if (!aspeed_sig_expr_enable(expr, pdata->map))
> > + if (!aspeed_sig_expr_enable(expr, pdata->maps))
> > return -EPERM;
> >
> > return 0;
> > @@ -481,10 +493,10 @@ int aspeed_pinctrl_probe(struct platform_device *pdev,
> > return -ENODEV;
> > }
> >
> > - pdata->map = syscon_node_to_regmap(parent->of_node);
> > - if (IS_ERR(pdata->map)) {
> > + pdata->maps[ASPEED_IP_SCU] = syscon_node_to_regmap(parent->of_node);
> > + if (IS_ERR(pdata->maps[ASPEED_IP_SCU])) {
> > dev_err(&pdev->dev, "No regmap for syscon pincontroller parent\n");
> > - return PTR_ERR(pdata->map);
> > + return PTR_ERR(pdata->maps[ASPEED_IP_SCU]);
> > }
> >
> > pctl = pinctrl_register(pdesc, &pdev->dev, pdata);
> > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> > index 3e72ef8c54bf..727728b86c07 100644
> > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
> > @@ -232,6 +232,11 @@
> > * group.
> > */
> >
> > +#define ASPEED_IP_SCU 0
> > +#define ASPEED_IP_GFX 1
> > +#define ASPEED_IP_LPCHC 2
> > +#define ASPEED_NR_PINMUX_IPS 3
> > +
> > /*
> > * The "Multi-function Pins Mapping and Control" table in the SoC datasheet
> > * references registers by the device/offset mnemonic. The register macros
> > @@ -261,7 +266,9 @@
> > * A signal descriptor, which describes the register, bits and the
> > * enable/disable values that should be compared or written.
> > *
> > - * @reg: The register offset from base in bytes
> > + * @ip: The IP block identifier, used as an index into the regmap array in
> > + * struct aspeed_pinctrl_data
> > + * @reg: The register offset with respect to the base address of the IP block
> > * @mask: The mask to apply to the register. The lowest set bit of the mask is
> > * used to derive the shift value.
> > * @enable: The value that enables the function. Value should be in the LSBs,
> > @@ -270,6 +277,7 @@
> > * LSBs, not at the position of the mask.
> > */
> > struct aspeed_sig_desc {
> > + unsigned int ip;
> > unsigned int reg;
> > u32 mask;
> > u32 enable;
> > @@ -313,24 +321,30 @@ struct aspeed_pin_desc {
> >
> > /* Macro hell */
> >
> > +#define SIG_DESC_IP_BIT(ip, reg, idx, val) \
> > + { ip, reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
> > +
> > /**
> > - * Short-hand macro for describing a configuration enabled by the state of one
> > - * bit. The disable value is derived.
> > + * Short-hand macro for describing an SCU descriptor enabled by the state of
> > + * one bit. The disable value is derived.
> > *
> > * @reg: The signal's associated register, offset from base
> > * @idx: The signal's bit index in the register
> > * @val: The value (0 or 1) that enables the function
> > */
> > #define SIG_DESC_BIT(reg, idx, val) \
> > - { reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
> > + SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, val)
> > +
> > +#define SIG_DESC_IP_SET(ip, reg, idx) SIG_DESC_IP_BIT(ip, reg, idx, 1)
> >
> > /**
> > - * A further short-hand macro describing a configuration enabled with a set bit.
> > + * A further short-hand macro expanding to an SCU descriptor enabled by a set
> > + * bit.
> > *
> > - * @reg: The configuration's associated register, offset from base
> > - * @idx: The configuration's bit index in the register
> > + * @reg: The register, offset from base
> > + * @idx: The bit index in the register
> > */
> > -#define SIG_DESC_SET(reg, idx) SIG_DESC_BIT(reg, idx, 1)
> > +#define SIG_DESC_SET(reg, idx) SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, 1)
> >
> > #define SIG_DESC_LIST_SYM(sig, func) sig_descs_ ## sig ## _ ## func
> > #define SIG_DESC_LIST_DECL(sig, func, ...) \
> > @@ -500,7 +514,7 @@ struct aspeed_pin_desc {
> > MS_PIN_DECL_(pin, SIG_EXPR_LIST_PTR(gpio))
> >
> > struct aspeed_pinctrl_data {
> > - struct regmap *map;
> > + struct regmap *maps[ASPEED_NR_PINMUX_IPS];
> >
> > const struct pinctrl_pin_desc *pins;
> > const unsigned int npins;
> > --
> > 2.7.4
> >
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6]
2016-11-02 14:37 ` [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6] Andrew Jeffery
2016-11-03 22:59 ` Joel Stanley
@ 2016-11-07 9:32 ` Linus Walleij
1 sibling, 0 replies; 24+ messages in thread
From: Linus Walleij @ 2016-11-07 9:32 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Lee Jones, Joel Stanley, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Wed, Nov 2, 2016 at 3:37 PM, Andrew Jeffery <andrew@aj.id.au> wrote:
> If a pin depending on bit 6 in SCU90 is requested for GPIO, the export
> will succeed but changes to the GPIO's value will not be accepted by the
> hardware. This is because the pinmux driver has misconfigured the SCU by
> writing 1 to the reserved bit.
>
> The description of SCU90[6] from the datasheet is 'Reserved, must keep
> at value ”0”'. The fix is to switch pinmux from the bit-flipping macro
> to explicitly configuring the .enable and .disable values to zero.
>
> The patch has been tested on an AST2500 EVB.
>
> Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver)
> Reported-by: Uma Yadlapati <yadlapat@us.ibm.com>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
>
> This patch should be applied for 4.9.
Patch applied for fixes, adding Joel's review tag.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6]
2016-11-03 22:59 ` Joel Stanley
@ 2016-11-07 9:34 ` Linus Walleij
2016-11-07 22:42 ` Andrew Jeffery
0 siblings, 1 reply; 24+ messages in thread
From: Linus Walleij @ 2016-11-07 9:34 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Lee Jones, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Thu, Nov 3, 2016 at 11:59 PM, Joel Stanley <joel@jms.id.au> wrote:
> In the future I think we should send fixes separately from the rest of
> the series, so it's clear to Linus where we expect patches to end up.
>
> Perhaps Linus can share his preference with us?
Just make it clear to me where the patch is headed, if it is
a fix or a new feature.
Also mixing stuff in big series is of course problematic because
all the CC:in on MFD patches and whatnot that I don't apply
makes the picture blurry, but sometimes it is anyways needed
for context so it is a soft requirement.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6]
2016-11-07 9:34 ` Linus Walleij
@ 2016-11-07 22:42 ` Andrew Jeffery
0 siblings, 0 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-07 22:42 UTC (permalink / raw)
To: Linus Walleij, Joel Stanley
Cc: Lee Jones, Mark Rutland, Rob Herring, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
[-- Attachment #1: Type: text/plain, Size: 921 bytes --]
On Mon, 2016-11-07 at 10:34 +0100, Linus Walleij wrote:
> > On Thu, Nov 3, 2016 at 11:59 PM, Joel Stanley <joel@jms.id.au> wrote:
>
> > In the future I think we should send fixes separately from the rest of
> > the series, so it's clear to Linus where we expect patches to end up.
> >
> > Perhaps Linus can share his preference with us?
>
> Just make it clear to me where the patch is headed, if it is
> a fix or a new feature.
>
> Also mixing stuff in big series is of course problematic because
> all the CC:in on MFD patches and whatnot that I don't apply
> makes the picture blurry, but sometimes it is anyways needed
> for context so it is a soft requirement.
Context was my concern here and I would otherwise have split the rest
of the patches along mfd/pinctrl boundaries. I felt the situation was
odd enough to warrant presenting the full picture.
Andrew
>
> Yours,
> Linus Walleij
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
2016-11-02 14:37 ` [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) Andrew Jeffery
@ 2016-11-09 18:26 ` Rob Herring
2016-11-10 3:19 ` Joel Stanley
2016-11-18 18:47 ` Lee Jones
1 sibling, 1 reply; 24+ messages in thread
From: Rob Herring @ 2016-11-09 18:26 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Lee Jones, Linus Walleij, Joel Stanley, Mark Rutland, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Thu, Nov 03, 2016 at 01:07:57AM +1030, Andrew Jeffery wrote:
> The Aspeed SoC Display Controller is presented as a syscon device to
> arbitrate access by display and pinmux drivers. Video pinmux
> configuration on fifth generation SoCs depends on bits in both the
> System Control Unit and the Display Controller.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++
The register space can't be split to 2 nodes?
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
> new file mode 100644
> index 000000000000..aea5370efd97
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
> @@ -0,0 +1,17 @@
> +* Device tree bindings for Aspeed SoC Display Controller (GFX)
> +
> +The Aspeed SoC Display Controller primarily does as its name suggests, but also
> +participates in pinmux requests on the g5 SoCs. It is therefore considered a
> +syscon device.
> +
> +Required properties:
> +- compatible: "aspeed,ast2500-gfx", "syscon"
I think perhaps we should drop the syscon here and the driver should
just register as a syscon.
Rob
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers
2016-11-02 14:37 ` [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers Andrew Jeffery
2016-11-03 23:24 ` Joel Stanley
@ 2016-11-09 18:26 ` Rob Herring
2016-11-09 23:50 ` Andrew Jeffery
1 sibling, 1 reply; 24+ messages in thread
From: Rob Herring @ 2016-11-09 18:26 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Lee Jones, Linus Walleij, Joel Stanley, Mark Rutland, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Thu, Nov 03, 2016 at 01:07:59AM +1030, Andrew Jeffery wrote:
> The System Control Unit IP block in the Aspeed SoCs is typically where
> the pinmux configuration is found, but not always. A number of pins
> depend on state in one of LPC Host Control (LPCHC) or SoC Display
> Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
> means to adjust these as necessary.
>
> We use syscon to cast a regmap over the GFX and LPCHCR blocks, which is
> used as an arbitration layer between the relevant driver and the pinctrl
> subsystem. The regmaps are then exposed to the SoC-specific pinctrl
> drivers by phandles in the devicetree, and are selected during a mux
> request by querying a new 'ip' member in struct aspeed_sig_desc.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> Since v1:
>
> The change is now proactive: instead of reporting that we need to flip bits in
> controllers we can't access, the patch provides access via regmaps for the
> relevant controllers. The implementation also splits out the IP block ID into
> its own variable rather than packing the value into the upper bits of the reg
> member of struct aspeed_sig_desc. This drives some churn in the diff, but I've
> tried to minimise it.
>
> .../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 50 +++++++++++++---
> drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +++---
> drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 39 ++++++++++---
> drivers/pinctrl/aspeed/pinctrl-aspeed.c | 66 +++++++++++++---------
> drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++++++++---
> 5 files changed, 144 insertions(+), 61 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> index 2ad18c4ea55c..115b0cce6c1c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> @@ -4,12 +4,19 @@ Aspeed Pin Controllers
> The Aspeed SoCs vary in functionality inside a generation but have a common mux
> device register layout.
>
> -Required properties:
> -- compatible : Should be any one of the following:
> - "aspeed,ast2400-pinctrl"
> - "aspeed,g4-pinctrl"
> - "aspeed,ast2500-pinctrl"
> - "aspeed,g5-pinctrl"
> +Required properties for g4:
> +- compatible : Should be any one of the following:
> + "aspeed,ast2400-pinctrl"
> + "aspeed,g4-pinctrl"
> +
> +Required properties for g5:
> +- compatible : Should be any one of the following:
> + "aspeed,ast2500-pinctrl"
> + "aspeed,g5-pinctrl"
> +
> +- aspeed,external-nodes: A cell of phandles to external controller nodes:
> + 0: compatible with "aspeed,ast2500-gfx", "syscon"
> + 1: compatible with "aspeed,ast2500-lpchc", "syscon"
>
> The pin controller node should be a child of a syscon node with the required
> property:
> @@ -47,7 +54,7 @@ RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
> TIMER7 TIMER8 VGABIOSROM
>
>
> -Examples:
> +g4 Example:
>
> syscon: scu@1e6e2000 {
> compatible = "syscon", "simple-mfd";
> @@ -63,5 +70,34 @@ syscon: scu@1e6e2000 {
> };
> };
>
> +g5 Example:
> +
> +apb {
> + gfx: display@1e6e6000 {
> + compatible = "aspeed,ast2500-gfx", "syscon";
> + reg = <0x1e6e6000 0x1000>;
> + };
> +
> + lpchc: lpchc@1e7890a0 {
> + compatible = "aspeed,ast2500-lpchc", "syscon";
> + reg = <0x1e7890a0 0xc4>;
> + };
> +
> + syscon: scu@1e6e2000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1e6e2000 0x1a8>;
> +
> + pinctrl: pinctrl {
Why the single child node here? Doesn't look like any reason for it in
the example.
> + compatible = "aspeed,g5-pinctrl";
> + aspeed,external-nodes = <&gfx, &lpchc>;
> +
> + pinctrl_i2c3_default: i2c3_default {
> + function = "I2C3";
> + groups = "I2C3";
> + };
> + };
> + };
> +};
> +
> Please refer to pinctrl-bindings.txt in this directory for details of the
> common pinctrl bindings used by client devices.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers
2016-11-09 18:26 ` Rob Herring
@ 2016-11-09 23:50 ` Andrew Jeffery
0 siblings, 0 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-09 23:50 UTC (permalink / raw)
To: Rob Herring
Cc: Lee Jones, Linus Walleij, Joel Stanley, Mark Rutland, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
[-- Attachment #1: Type: text/plain, Size: 5698 bytes --]
On Wed, 2016-11-09 at 12:26 -0600, Rob Herring wrote:
> On Thu, Nov 03, 2016 at 01:07:59AM +1030, Andrew Jeffery wrote:
> > The System Control Unit IP block in the Aspeed SoCs is typically where
> > the pinmux configuration is found, but not always. A number of pins
> > depend on state in one of LPC Host Control (LPCHC) or SoC Display
> > Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
> > means to adjust these as necessary.
> >
> > We use syscon to cast a regmap over the GFX and LPCHCR blocks, which is
> > used as an arbitration layer between the relevant driver and the pinctrl
> > subsystem. The regmaps are then exposed to the SoC-specific pinctrl
> > drivers by phandles in the devicetree, and are selected during a mux
> > request by querying a new 'ip' member in struct aspeed_sig_desc.
> >
> > > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> > ---
> > Since v1:
> >
> > The change is now proactive: instead of reporting that we need to flip bits in
> > controllers we can't access, the patch provides access via regmaps for the
> > relevant controllers. The implementation also splits out the IP block ID into
> > its own variable rather than packing the value into the upper bits of the reg
> > member of struct aspeed_sig_desc. This drives some churn in the diff, but I've
> > tried to minimise it.
> >
> > .../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 50 +++++++++++++---
> > drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +++---
> > drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 39 ++++++++++---
> > drivers/pinctrl/aspeed/pinctrl-aspeed.c | 66 +++++++++++++---------
> > drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++++++++---
> > 5 files changed, 144 insertions(+), 61 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > index 2ad18c4ea55c..115b0cce6c1c 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > @@ -4,12 +4,19 @@ Aspeed Pin Controllers
> > The Aspeed SoCs vary in functionality inside a generation but have a common mux
> > device register layout.
> >
> > -Required properties:
> > -- compatible : Should be any one of the following:
> > - "aspeed,ast2400-pinctrl"
> > - "aspeed,g4-pinctrl"
> > - "aspeed,ast2500-pinctrl"
> > - "aspeed,g5-pinctrl"
> > +Required properties for g4:
> > +- compatible : Should be any one of the following:
> > + "aspeed,ast2400-pinctrl"
> > + "aspeed,g4-pinctrl"
> > +
> > +Required properties for g5:
> > +- compatible : Should be any one of the following:
> > + "aspeed,ast2500-pinctrl"
> > + "aspeed,g5-pinctrl"
> > +
> > +- aspeed,external-nodes: A cell of phandles to external controller nodes:
> > + 0: compatible with "aspeed,ast2500-gfx", "syscon"
> > + 1: compatible with "aspeed,ast2500-lpchc", "syscon"
> >
> > The pin controller node should be a child of a syscon node with the required
> > property:
> > @@ -47,7 +54,7 @@ RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
> > TIMER7 TIMER8 VGABIOSROM
> >
> >
> > -Examples:
> > +g4 Example:
> >
> > syscon: scu@1e6e2000 {
> > compatible = "syscon", "simple-mfd";
> > @@ -63,5 +70,34 @@ syscon: scu@1e6e2000 {
> > };
> > };
> >
> > +g5 Example:
> > +
> > +apb {
> > + gfx: display@1e6e6000 {
> > + compatible = "aspeed,ast2500-gfx", "syscon";
> > + reg = <0x1e6e6000 0x1000>;
> > + };
> > +
> > + lpchc: lpchc@1e7890a0 {
> > + compatible = "aspeed,ast2500-lpchc", "syscon";
> > + reg = <0x1e7890a0 0xc4>;
> > + };
> > +
> > + syscon: scu@1e6e2000 {
> > + compatible = "syscon", "simple-mfd";
> > + reg = <0x1e6e2000 0x1a8>;
> > +
> > + pinctrl: pinctrl {
>
> Why the single child node here? Doesn't look like any reason for it in
> the example.
The SCU contains other miscellaneous functionality besides pinctrl
registers, but that's not relevant for the pinctrl bindings. This is an
example for the g5 SoCs demonstrating use of the aspeed,external-nodes
property, which isn't required for the g4 and is why I split the
examples.
Maybe I should split out the bindings for each SoC generation into
separate files?
>
> > + compatible = "aspeed,g5-pinctrl";
> > + aspeed,external-nodes = <&gfx, &lpchc>;
You didn't comment on my approach here, but I'm interested in feedback.
I've gone the route of fixed ordering of the phandles, but there are
two other approaches:
1. Relax the fixed ordering requirement by adding an "aspeed,external-
node-names" property and requiring correlated indices between them
2. Using separate properties for each required external node
Approach 1 seems pretty idiomatic and only crossed my mind after I'd
sent the patch. Approach 2 seems a bit ugly as the number of properties
scales with the number of controllers participating in the pinmux
configuration.
Something that also wasn't clear to me was whether I need the "aspeed"
prefix on the property name. What's the convention here? Do I need it
in this case?
Cheers,
Andrew
> > +
> > > > + pinctrl_i2c3_default: i2c3_default {
> > > > + function = "I2C3";
> > > > + groups = "I2C3";
> > > > + };
> > > > + };
> > > > + };
> > +};
> > +
> > Please refer to pinctrl-bindings.txt in this directory for details of the
> > common pinctrl bindings used by client devices.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
2016-11-09 18:26 ` Rob Herring
@ 2016-11-10 3:19 ` Joel Stanley
2016-11-10 17:40 ` Rob Herring
0 siblings, 1 reply; 24+ messages in thread
From: Joel Stanley @ 2016-11-10 3:19 UTC (permalink / raw)
To: Rob Herring, Andrew Jeffery
Cc: Lee Jones, Linus Walleij, Mark Rutland, linux-gpio,
linux-arm-kernel, linux-kernel, devicetree
On Thu, Nov 10, 2016 at 4:56 AM, Rob Herring <robh@kernel.org> wrote:
> On Thu, Nov 03, 2016 at 01:07:57AM +1030, Andrew Jeffery wrote:
>> The Aspeed SoC Display Controller is presented as a syscon device to
>> arbitrate access by display and pinmux drivers. Video pinmux
>> configuration on fifth generation SoCs depends on bits in both the
>> System Control Unit and the Display Controller.
>>
>> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
>> ---
>> Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++
>
> The register space can't be split to 2 nodes?
Do you mean splitting the GFX IP and enable register into two nodes?
We can't. Pinmux needs to check bit 6 and 7 in GFX064, which is in the
middle the IP block:
GFX060: CRT Control Register I
GFX064: CRT Control Register II
GFX068: CRT Status Register
GFX06C: CRT Misc Setting Register
>> +The Aspeed SoC Display Controller primarily does as its name suggests, but also
>> +participates in pinmux requests on the g5 SoCs. It is therefore considered a
>> +syscon device.
>> +
>> +Required properties:
>> +- compatible: "aspeed,ast2500-gfx", "syscon"
>
> I think perhaps we should drop the syscon here and the driver should
> just register as a syscon.
We want the regmap to be present whenever the GFX driver or pinmux is
loaded. If we register it in pinmux but chose to not build in that
driver, we lack the regmap. Same for the case where a user builds in
the GFX driver and not pinmux. I think this means we want the syscon
compatible string, unless my understanding is wrong?
Cheers,
Joel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
2016-11-10 3:19 ` Joel Stanley
@ 2016-11-10 17:40 ` Rob Herring
0 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2016-11-10 17:40 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Lee Jones, Linus Walleij, Mark Rutland,
linux-gpio, linux-arm-kernel, linux-kernel, devicetree
On Wed, Nov 9, 2016 at 9:19 PM, Joel Stanley <joel@jms.id.au> wrote:
> On Thu, Nov 10, 2016 at 4:56 AM, Rob Herring <robh@kernel.org> wrote:
>> On Thu, Nov 03, 2016 at 01:07:57AM +1030, Andrew Jeffery wrote:
>>> The Aspeed SoC Display Controller is presented as a syscon device to
>>> arbitrate access by display and pinmux drivers. Video pinmux
>>> configuration on fifth generation SoCs depends on bits in both the
>>> System Control Unit and the Display Controller.
>>>
>>> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
>>> ---
>>> Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++
>>
>> The register space can't be split to 2 nodes?
>
> Do you mean splitting the GFX IP and enable register into two nodes?
>
> We can't. Pinmux needs to check bit 6 and 7 in GFX064, which is in the
> middle the IP block:
>
> GFX060: CRT Control Register I
> GFX064: CRT Control Register II
> GFX068: CRT Status Register
> GFX06C: CRT Misc Setting Register
Okay.
>>> +The Aspeed SoC Display Controller primarily does as its name suggests, but also
>>> +participates in pinmux requests on the g5 SoCs. It is therefore considered a
>>> +syscon device.
>>> +
>>> +Required properties:
>>> +- compatible: "aspeed,ast2500-gfx", "syscon"
>>
>> I think perhaps we should drop the syscon here and the driver should
>> just register as a syscon.
>
> We want the regmap to be present whenever the GFX driver or pinmux is
> loaded. If we register it in pinmux but chose to not build in that
> driver, we lack the regmap. Same for the case where a user builds in
> the GFX driver and not pinmux. I think this means we want the syscon
> compatible string, unless my understanding is wrong?
Right.
Acked-by: Rob Herring <robh@kernel.org>
Rob
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC)
2016-11-02 14:37 ` [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC) Andrew Jeffery
2016-11-03 23:06 ` Joel Stanley
@ 2016-11-18 18:44 ` Lee Jones
2016-11-18 18:45 ` Lee Jones
1 sibling, 1 reply; 24+ messages in thread
From: Lee Jones @ 2016-11-18 18:44 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Linus Walleij, Joel Stanley, Mark Rutland, Rob Herring,
linux-gpio, linux-arm-kernel, linux-kernel, devicetree
Arnd,
Do you have a preference?
> The Aspeed LPC Host Controller is presented as a syscon device to
> arbitrate access by LPC and pinmux drivers. LPC pinmux configuration on
> fifth generation SoCs depends on bits in both the System Control Unit
> and the LPC Host Controller.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +++++++++++++++++
Create a new directory in bindings/mfd called 'syscon'.
Or perhaps 'bindings/syscon'.
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> new file mode 100644
> index 000000000000..792651488c3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> @@ -0,0 +1,17 @@
> +* Device tree bindings for the Aspeed LPC Host Controller (LPCHC)
> +
> +The LPCHC registers configure LPC behaviour between the BMC and the host
> +system. The LPCHC also participates in pinmux requests on g5 SoCs and is
> +therefore considered a syscon device.
> +
> +Required properties:
> +- compatible: "aspeed,ast2500-lpchc", "syscon"
> +- reg: contains offset/length value of the LPCHC memory
> + region.
Why not just use a single tab, then you don't have to linewrap?
> +Example:
> +
> +lpchc: lpchc@1e7890a0 {
> + compatible = "aspeed,ast2500-lpchc", "syscon";
> + reg = <0x1e7890a0 0xc4>;
> +};
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC)
2016-11-18 18:44 ` Lee Jones
@ 2016-11-18 18:45 ` Lee Jones
2016-11-22 3:25 ` Andrew Jeffery
0 siblings, 1 reply; 24+ messages in thread
From: Lee Jones @ 2016-11-18 18:45 UTC (permalink / raw)
To: Andrew Jeffery, arnd
Cc: Linus Walleij, Joel Stanley, Mark Rutland, Rob Herring,
linux-gpio, linux-arm-kernel, linux-kernel, devicetree
[Sending Arnd this time!]
> Arnd,
>
> Do you have a preference?
>
> > The Aspeed LPC Host Controller is presented as a syscon device to
> > arbitrate access by LPC and pinmux drivers. LPC pinmux configuration on
> > fifth generation SoCs depends on bits in both the System Control Unit
> > and the LPC Host Controller.
> >
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> > ---
> > Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +++++++++++++++++
>
> Create a new directory in bindings/mfd called 'syscon'.
>
> Or perhaps 'bindings/syscon'.
>
> > 1 file changed, 17 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> > new file mode 100644
> > index 000000000000..792651488c3d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> > @@ -0,0 +1,17 @@
> > +* Device tree bindings for the Aspeed LPC Host Controller (LPCHC)
> > +
> > +The LPCHC registers configure LPC behaviour between the BMC and the host
> > +system. The LPCHC also participates in pinmux requests on g5 SoCs and is
> > +therefore considered a syscon device.
> > +
> > +Required properties:
> > +- compatible: "aspeed,ast2500-lpchc", "syscon"
> > +- reg: contains offset/length value of the LPCHC memory
> > + region.
>
> Why not just use a single tab, then you don't have to linewrap?
>
> > +Example:
> > +
> > +lpchc: lpchc@1e7890a0 {
> > + compatible = "aspeed,ast2500-lpchc", "syscon";
> > + reg = <0x1e7890a0 0xc4>;
> > +};
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
2016-11-02 14:37 ` [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) Andrew Jeffery
2016-11-09 18:26 ` Rob Herring
@ 2016-11-18 18:47 ` Lee Jones
1 sibling, 0 replies; 24+ messages in thread
From: Lee Jones @ 2016-11-18 18:47 UTC (permalink / raw)
To: Andrew Jeffery, arnd
Cc: Linus Walleij, Joel Stanley, Mark Rutland, Rob Herring,
linux-gpio, linux-arm-kernel, linux-kernel, devicetree
On Thu, 03 Nov 2016, Andrew Jeffery wrote:
> The Aspeed SoC Display Controller is presented as a syscon device to
> arbitrate access by display and pinmux drivers. Video pinmux
> configuration on fifth generation SoCs depends on bits in both the
> System Control Unit and the Display Controller.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
Same here.
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
> new file mode 100644
> index 000000000000..aea5370efd97
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
> @@ -0,0 +1,17 @@
> +* Device tree bindings for Aspeed SoC Display Controller (GFX)
> +
> +The Aspeed SoC Display Controller primarily does as its name suggests, but also
> +participates in pinmux requests on the g5 SoCs. It is therefore considered a
> +syscon device.
> +
> +Required properties:
> +- compatible: "aspeed,ast2500-gfx", "syscon"
> +- reg: contains offset/length value of the GFX memory
> + region.
> +
> +Example:
> +
> +gfx: display@1e6e6000 {
> + compatible = "aspeed,ast2500-gfx", "syscon";
> + reg = <0x1e6e6000 0x1000>;
> +};
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC)
2016-11-18 18:45 ` Lee Jones
@ 2016-11-22 3:25 ` Andrew Jeffery
0 siblings, 0 replies; 24+ messages in thread
From: Andrew Jeffery @ 2016-11-22 3:25 UTC (permalink / raw)
To: Lee Jones, arnd
Cc: Linus Walleij, Joel Stanley, Mark Rutland, Rob Herring,
linux-gpio, linux-arm-kernel, linux-kernel, devicetree
[-- Attachment #1: Type: text/plain, Size: 2384 bytes --]
On Fri, 2016-11-18 at 18:45 +0000, Lee Jones wrote:
> [Sending Arnd this time!]
>
> > Arnd,
> >
> > Do you have a preference?
> >
> > > The Aspeed LPC Host Controller is presented as a syscon device to
> > > arbitrate access by LPC and pinmux drivers. LPC pinmux configuration on
> > > fifth generation SoCs depends on bits in both the System Control Unit
> > > and the LPC Host Controller.
> > >
> > > > > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> > > ---
> > > Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt | 17 +++++++++++++++++
> >
> > Create a new directory in bindings/mfd called 'syscon'.
> >
> > Or perhaps 'bindings/syscon'.
> >
Sounds good to me. I'll wait for Arnd's feedback.
Note that this patch conflicts with some of the ideas I outlined in
https://www.spinics.net/lists/arm-kernel/msg543233.html
I sent it hoping to get some feedback on the approach to take for these
LPC-related bits. Did you have any suggestions? The problems with
hardware complexity are amplified by the fact that the datasheet is
only available under NDA, but I will do what I can to clarify.
> > > 1 file changed, 17 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> > > new file mode 100644
> > > index 000000000000..792651488c3d
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt
> > > @@ -0,0 +1,17 @@
> > > +* Device tree bindings for the Aspeed LPC Host Controller (LPCHC)
> > > +
> > > +The LPCHC registers configure LPC behaviour between the BMC and the host
> > > +system. The LPCHC also participates in pinmux requests on g5 SoCs and is
> > > +therefore considered a syscon device.
> > > +
> > > +Required properties:
> > > > > > +- compatible: "aspeed,ast2500-lpchc", "syscon"
> > > > > > +- reg: contains offset/length value of the LPCHC memory
> > > + region.
> >
> > Why not just use a single tab, then you don't have to linewrap?
I'll clean that up.
Cheers,
Andrew
> >
> > > +Example:
> > > +
> > > > > > +lpchc: lpchc@1e7890a0 {
> > > > > > + compatible = "aspeed,ast2500-lpchc", "syscon";
> > > > > > + reg = <0x1e7890a0 0xc4>;
> > > +};
>
>
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2016-11-22 3:25 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-02 14:37 [PATCH v2 0/6] pinctrl: aspeed: Fixes for g5, implement remaining pins Andrew Jeffery
2016-11-02 14:37 ` [PATCH v2 1/6] pinctrl-aspeed-g5: Never set SCU90[6] Andrew Jeffery
2016-11-03 22:59 ` Joel Stanley
2016-11-07 9:34 ` Linus Walleij
2016-11-07 22:42 ` Andrew Jeffery
2016-11-07 9:32 ` Linus Walleij
2016-11-02 14:37 ` [PATCH v2 2/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) Andrew Jeffery
2016-11-09 18:26 ` Rob Herring
2016-11-10 3:19 ` Joel Stanley
2016-11-10 17:40 ` Rob Herring
2016-11-18 18:47 ` Lee Jones
2016-11-02 14:37 ` [PATCH v2 3/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC) Andrew Jeffery
2016-11-03 23:06 ` Joel Stanley
2016-11-04 3:45 ` Andrew Jeffery
2016-11-18 18:44 ` Lee Jones
2016-11-18 18:45 ` Lee Jones
2016-11-22 3:25 ` Andrew Jeffery
2016-11-02 14:37 ` [PATCH v2 4/6] pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers Andrew Jeffery
2016-11-03 23:24 ` Joel Stanley
2016-11-04 3:59 ` Andrew Jeffery
2016-11-09 18:26 ` Rob Herring
2016-11-09 23:50 ` Andrew Jeffery
2016-11-02 14:38 ` [PATCH v2 5/6] pinctrl: aspeed-g4: Add mux configuration for all pins Andrew Jeffery
2016-11-02 14:38 ` [PATCH v2 6/6] pinctrl: aspeed-g5: " Andrew Jeffery
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).