* [PATCH] dt-bindings: Remove "status" from schema examples
@ 2021-07-20 17:20 Rob Herring
2021-07-20 17:49 ` Mauro Carvalho Chehab
` (8 more replies)
0 siblings, 9 replies; 11+ messages in thread
From: Rob Herring @ 2021-07-20 17:20 UTC (permalink / raw)
To: devicetree
Cc: linux-kernel, Maxime Ripard, Chen-Yu Tsai, Thierry Reding,
Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Mark Brown, Robert Marko, Philipp Zabel, Alessandro Zummo,
Alexandre Belloni, Ramesh Shanmugasundaram, G. Jaya Kumaran,
Linus Walleij, Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota,
Karol Gugala, Mateusz Holenko, Olivier Moysan, Peter Ujfalusi,
dri-devel, linux-media, netdev, linux-rtc, alsa-devel
There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).
Enabling qca,ar71xx causes a warning, so let's fix the node names:
Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
From schema: schemas/phy/phy-provider.yaml
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: ChiYuan Huang <cy_huang@richtek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Dilip Kota <eswara.kota@linux.intel.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
.../display/panel/boe,tv101wum-nl6.yaml | 1 -
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
.../bindings/media/renesas,drif.yaml | 1 -
.../bindings/net/intel,dwmac-plat.yaml | 2 --
.../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
.../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
.../regulator/richtek,rt6245-regulator.yaml | 1 -
.../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
.../reset/hisilicon,hi3660-reset.yaml | 1 -
.../bindings/reset/intel,rcu-gw.yaml | 1 -
.../bindings/rtc/microcrystal,rv3032.yaml | 1 -
.../soc/litex/litex,soc-controller.yaml | 1 -
.../bindings/sound/st,stm32-sai.yaml | 2 --
.../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
.../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
17 files changed, 5 insertions(+), 45 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 5d42d36608d9..4951b5ef5c6a 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -174,7 +174,6 @@ examples:
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
@@ -233,7 +232,6 @@ examples:
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 38bc1d1b511e..b87a2e28c866 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -70,7 +70,6 @@ examples:
avee-supply = <&ppvarp_lcd>;
pp1800-supply = <&pp1800_lcd>;
backlight = <&backlight_lcd0>;
- status = "okay";
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 7c09eec78ce5..877183cf4278 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -200,8 +200,6 @@ examples:
clock-names = "pclk", "wrap", "phy", "axi";
power-domains = <&mipi_pd>;
- status = "disabled";
-
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index 2867d11fe156..9403b235e976 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -242,7 +242,6 @@ examples:
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 513>;
renesas,bonding = <&drif11>;
- status = "disabled";
};
drif11: rif@e6f70000 {
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index c1948ce00081..79fa04f5e40d 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -116,8 +116,6 @@ examples:
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
snps,tso;
- status = "okay";
-
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index f2e91d1bf7d7..378ed2d3b003 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -71,7 +71,6 @@ examples:
ethernet@c8009000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc8009000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
intel,npe-handle = <&npe 1>;
@@ -82,7 +81,6 @@ examples:
ethernet@c800c000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc800c000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
intel,npe-handle = <&npe 2>;
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 081742c2b726..64995cbb0f97 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -90,14 +90,11 @@ examples:
# UART example on Raspberry Pi
- |
uart0 {
- status = "okay";
-
nfc {
compatible = "samsung,s3fwrn82";
en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index f0db22645d73..cf4d35edaa1b 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -101,8 +101,6 @@ examples:
phy-mode = "gmii";
- status = "disabled";
-
fixed-link {
speed = <1000>;
full-duplex;
@@ -148,32 +146,24 @@ examples:
reg = <0x1>;
phy-handle = <&phy_port0>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port2: port@2 {
reg = <0x2>;
phy-handle = <&phy_port1>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port3: port@3 {
reg = <0x3>;
phy-handle = <&phy_port2>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port4: port@4 {
reg = <0x4>;
phy-handle = <&phy_port3>;
phy-mode = "internal";
-
- status = "disabled";
};
};
@@ -183,34 +173,29 @@ examples:
interrupt-parent = <&switch10>;
- phy_port0: phy@0 {
+ phy_port0: ethernet-phy@0 {
reg = <0x0>;
interrupts = <0>;
- status = "disabled";
};
- phy_port1: phy@1 {
+ phy_port1: ethernet-phy@1 {
reg = <0x1>;
interrupts = <0>;
- status = "disabled";
};
- phy_port2: phy@2 {
+ phy_port2: ethernet-phy@2 {
reg = <0x2>;
interrupts = <0>;
- status = "disabled";
};
- phy_port3: phy@3 {
+ phy_port3: ethernet-phy@3 {
reg = <0x3>;
interrupts = <0>;
- status = "disabled";
};
- phy_port4: phy@4 {
+ phy_port4: ethernet-phy@4 {
reg = <0x4>;
interrupts = <0>;
- status = "disabled";
};
};
};
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index 796ceac87445..e983d0e70c9b 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -77,7 +77,6 @@ examples:
rt6245@34 {
compatible = "richtek,rt6245";
- status = "okay";
reg = <0x34>;
enable-gpios = <&gpio26 2 0>;
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index 6f45582c914e..dd7a2f92634c 100644
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -39,6 +39,5 @@ examples:
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
- status = "disabled";
};
...
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
index 9bf40952e5b7..b0c41ab1a746 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -72,6 +72,5 @@ examples:
resets = <&iomcu_rst 0x20 3>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
- status = "disabled";
};
...
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index 6b2d56cc3f38..13bf6bb3f097 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -57,7 +57,6 @@ examples:
};
pwm: pwm@e0d00000 {
- status = "disabled";
compatible = "intel,lgm-pwm";
reg = <0xe0d00000 0x30>;
clocks = <&cgu0 1>;
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
index a2c55303810d..9593840a4a2b 100644
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -53,7 +53,6 @@ examples:
rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
- status = "okay";
pinctrl-0 = <&rtc_nint_pins>;
interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
trickle-resistor-ohms = <7000>;
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
index c8b57c7fd08c..ecae9fa8561b 100644
--- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -35,7 +35,6 @@ examples:
soc_ctrl0: soc-controller@f0000000 {
compatible = "litex,soc-controller";
reg = <0xf0000000 0xc>;
- status = "okay";
};
...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 06e83461705c..f97132400bb6 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -180,7 +180,6 @@ examples:
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
- status = "okay";
sai2a: audio-controller@4400b004 {
#sound-dai-cells = <0>;
@@ -190,7 +189,6 @@ examples:
dma-names = "tx";
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index ec06789b21df..6806f53a4aed 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -127,8 +127,6 @@ examples:
compatible = "ti,j721e-cpb-audio";
model = "j721e-cpb";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
index ee9f960de36b..859d369c71e2 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -119,8 +119,6 @@ examples:
compatible = "ti,j721e-cpb-ivi-audio";
model = "j721e-cpb-ivi";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
--
2.27.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
@ 2021-07-20 17:49 ` Mauro Carvalho Chehab
2021-07-20 17:58 ` Laurent Pinchart
` (7 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-20 17:49 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, linux-kernel, Maxime Ripard, Chen-Yu Tsai,
Thierry Reding, Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
David S. Miller, Jakub Kicinski, Mark Brown, Robert Marko,
Philipp Zabel, Alessandro Zummo, Alexandre Belloni,
Ramesh Shanmugasundaram, G. Jaya Kumaran, Linus Walleij,
Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi, dri-devel,
linux-media, netdev, linux-rtc, alsa-devel
Em Tue, 20 Jul 2021 11:20:25 -0600
Rob Herring <robh@kernel.org> escreveu:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> # For media
Thanks,
Mauro
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
2021-07-20 17:49 ` Mauro Carvalho Chehab
@ 2021-07-20 17:58 ` Laurent Pinchart
2021-07-20 18:15 ` Rui Miguel Silva
` (6 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Laurent Pinchart @ 2021-07-20 17:58 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, linux-kernel, Maxime Ripard, Chen-Yu Tsai,
Thierry Reding, Sam Ravnborg, Rui Miguel Silva,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Mark Brown, Robert Marko, Philipp Zabel, Alessandro Zummo,
Alexandre Belloni, Ramesh Shanmugasundaram, G. Jaya Kumaran,
Linus Walleij, Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota,
Karol Gugala, Mateusz Holenko, Olivier Moysan, Peter Ujfalusi,
dri-devel, linux-media, netdev, linux-rtc, alsa-devel
Hi Rob,
Thank you for the patch.
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
> avee-supply = <&ppvarp_lcd>;
> pp1800-supply = <&pp1800_lcd>;
> backlight = <&backlight_lcd0>;
> - status = "okay";
> port {
> panel_in: endpoint {
> remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
> clock-names = "pclk", "wrap", "phy", "axi";
> power-domains = <&mipi_pd>;
>
> - status = "disabled";
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
> power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> resets = <&cpg 513>;
> renesas,bonding = <&drif11>;
> - status = "disabled";
> };
>
> drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
> snps,mtl-rx-config = <&mtl_rx_setup>;
> snps,mtl-tx-config = <&mtl_tx_setup>;
> snps,tso;
> - status = "okay";
> -
I would have kept the blank line here.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> mdio0 {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
> ethernet@c8009000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc8009000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 4>;
> queue-txready = <&qmgr 21>;
> intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
> ethernet@c800c000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc800c000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 3>;
> queue-txready = <&qmgr 20>;
> intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
> # UART example on Raspberry Pi
> - |
> uart0 {
> - status = "okay";
> -
> nfc {
> compatible = "samsung,s3fwrn82";
>
> en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
> wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>
> - status = "okay";
> };
> };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>
> phy-mode = "gmii";
>
> - status = "disabled";
> -
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -148,32 +146,24 @@ examples:
> reg = <0x1>;
> phy-handle = <&phy_port0>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port2: port@2 {
> reg = <0x2>;
> phy-handle = <&phy_port1>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port3: port@3 {
> reg = <0x3>;
> phy-handle = <&phy_port2>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port4: port@4 {
> reg = <0x4>;
> phy-handle = <&phy_port3>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
> };
>
> @@ -183,34 +173,29 @@ examples:
>
> interrupt-parent = <&switch10>;
>
> - phy_port0: phy@0 {
> + phy_port0: ethernet-phy@0 {
> reg = <0x0>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port1: phy@1 {
> + phy_port1: ethernet-phy@1 {
> reg = <0x1>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port2: phy@2 {
> + phy_port2: ethernet-phy@2 {
> reg = <0x2>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port3: phy@3 {
> + phy_port3: ethernet-phy@3 {
> reg = <0x3>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port4: phy@4 {
> + phy_port4: ethernet-phy@4 {
> reg = <0x4>;
> interrupts = <0>;
> - status = "disabled";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>
> rt6245@34 {
> compatible = "richtek,rt6245";
> - status = "okay";
> reg = <0x34>;
> enable-gpios = <&gpio26 2 0>;
>
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
> regulator-min-microvolt = <1500000>;
> regulator-max-microvolt = <3000000>;
> regulator-always-on;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
> resets = <&iomcu_rst 0x20 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
> };
>
> pwm: pwm@e0d00000 {
> - status = "disabled";
> compatible = "intel,lgm-pwm";
> reg = <0xe0d00000 0x30>;
> clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
> rtc@51 {
> compatible = "microcrystal,rv3032";
> reg = <0x51>;
> - status = "okay";
> pinctrl-0 = <&rtc_nint_pins>;
> interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
> trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
> soc_ctrl0: soc-controller@f0000000 {
> compatible = "litex,soc-controller";
> reg = <0xf0000000 0xc>;
> - status = "okay";
> };
>
> ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
> pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> - status = "okay";
>
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
> dma-names = "tx";
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> - status = "okay";
> };
> };
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
> compatible = "ti,j721e-cpb-audio";
> model = "j721e-cpb";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
> compatible = "ti,j721e-cpb-ivi-audio";
> model = "j721e-cpb-ivi";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
2021-07-20 17:49 ` Mauro Carvalho Chehab
2021-07-20 17:58 ` Laurent Pinchart
@ 2021-07-20 18:15 ` Rui Miguel Silva
2021-07-20 18:40 ` Alexandre Belloni
` (5 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Rui Miguel Silva @ 2021-07-20 18:15 UTC (permalink / raw)
To: Rob Herring, devicetree
Cc: linux-kernel, Maxime Ripard, Chen-Yu Tsai, Thierry Reding,
Sam Ravnborg, Laurent Pinchart, Mauro Carvalho Chehab,
David S. Miller, Jakub Kicinski, Mark Brown, Robert Marko,
Philipp Zabel, Alessandro Zummo, Alexandre Belloni,
Ramesh Shanmugasundaram, G. Jaya Kumaran, Linus Walleij,
Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi, dri-devel,
linux-media, netdev, linux-rtc, alsa-devel
On Tue Jul 20, 2021 at 6:20 PM WEST, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Cheers,
Rui
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
` (2 preceding siblings ...)
2021-07-20 18:15 ` Rui Miguel Silva
@ 2021-07-20 18:40 ` Alexandre Belloni
2021-07-20 20:33 ` Mark Brown
` (4 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Alexandre Belloni @ 2021-07-20 18:40 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, linux-kernel, Maxime Ripard, Chen-Yu Tsai,
Thierry Reding, Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Mark Brown, Robert Marko, Philipp Zabel, Alessandro Zummo,
Ramesh Shanmugasundaram, G. Jaya Kumaran, Linus Walleij,
Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi, dri-devel,
linux-media, netdev, linux-rtc, alsa-devel
On 20/07/2021 11:20:25-0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
> avee-supply = <&ppvarp_lcd>;
> pp1800-supply = <&pp1800_lcd>;
> backlight = <&backlight_lcd0>;
> - status = "okay";
> port {
> panel_in: endpoint {
> remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
> clock-names = "pclk", "wrap", "phy", "axi";
> power-domains = <&mipi_pd>;
>
> - status = "disabled";
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
> power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> resets = <&cpg 513>;
> renesas,bonding = <&drif11>;
> - status = "disabled";
> };
>
> drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
> snps,mtl-rx-config = <&mtl_rx_setup>;
> snps,mtl-tx-config = <&mtl_tx_setup>;
> snps,tso;
> - status = "okay";
> -
> mdio0 {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
> ethernet@c8009000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc8009000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 4>;
> queue-txready = <&qmgr 21>;
> intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
> ethernet@c800c000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc800c000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 3>;
> queue-txready = <&qmgr 20>;
> intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
> # UART example on Raspberry Pi
> - |
> uart0 {
> - status = "okay";
> -
> nfc {
> compatible = "samsung,s3fwrn82";
>
> en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
> wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>
> - status = "okay";
> };
> };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>
> phy-mode = "gmii";
>
> - status = "disabled";
> -
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -148,32 +146,24 @@ examples:
> reg = <0x1>;
> phy-handle = <&phy_port0>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port2: port@2 {
> reg = <0x2>;
> phy-handle = <&phy_port1>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port3: port@3 {
> reg = <0x3>;
> phy-handle = <&phy_port2>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port4: port@4 {
> reg = <0x4>;
> phy-handle = <&phy_port3>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
> };
>
> @@ -183,34 +173,29 @@ examples:
>
> interrupt-parent = <&switch10>;
>
> - phy_port0: phy@0 {
> + phy_port0: ethernet-phy@0 {
> reg = <0x0>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port1: phy@1 {
> + phy_port1: ethernet-phy@1 {
> reg = <0x1>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port2: phy@2 {
> + phy_port2: ethernet-phy@2 {
> reg = <0x2>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port3: phy@3 {
> + phy_port3: ethernet-phy@3 {
> reg = <0x3>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port4: phy@4 {
> + phy_port4: ethernet-phy@4 {
> reg = <0x4>;
> interrupts = <0>;
> - status = "disabled";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>
> rt6245@34 {
> compatible = "richtek,rt6245";
> - status = "okay";
> reg = <0x34>;
> enable-gpios = <&gpio26 2 0>;
>
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
> regulator-min-microvolt = <1500000>;
> regulator-max-microvolt = <3000000>;
> regulator-always-on;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
> resets = <&iomcu_rst 0x20 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
> };
>
> pwm: pwm@e0d00000 {
> - status = "disabled";
> compatible = "intel,lgm-pwm";
> reg = <0xe0d00000 0x30>;
> clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
> rtc@51 {
> compatible = "microcrystal,rv3032";
> reg = <0x51>;
> - status = "okay";
> pinctrl-0 = <&rtc_nint_pins>;
> interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
> trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
> soc_ctrl0: soc-controller@f0000000 {
> compatible = "litex,soc-controller";
> reg = <0xf0000000 0xc>;
> - status = "okay";
> };
>
> ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
> pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> - status = "okay";
>
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
> dma-names = "tx";
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> - status = "okay";
> };
> };
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
> compatible = "ti,j721e-cpb-audio";
> model = "j721e-cpb";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
> compatible = "ti,j721e-cpb-ivi-audio";
> model = "j721e-cpb-ivi";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> --
> 2.27.0
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
` (3 preceding siblings ...)
2021-07-20 18:40 ` Alexandre Belloni
@ 2021-07-20 20:33 ` Mark Brown
2021-07-21 8:32 ` Philipp Zabel
` (3 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Mark Brown @ 2021-07-20 20:33 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, linux-kernel, Maxime Ripard, Chen-Yu Tsai,
Thierry Reding, Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Robert Marko, Philipp Zabel, Alessandro Zummo, Alexandre Belloni,
Ramesh Shanmugasundaram, G. Jaya Kumaran, Linus Walleij,
Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi, dri-devel,
linux-media, netdev, linux-rtc, alsa-devel
[-- Attachment #1: Type: text/plain, Size: 263 bytes --]
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
Acked-by: Mark Brown <broonie@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
` (4 preceding siblings ...)
2021-07-20 20:33 ` Mark Brown
@ 2021-07-21 8:32 ` Philipp Zabel
2021-07-21 13:49 ` Rob Herring
2021-07-21 11:05 ` Oleksij Rempel
` (2 subsequent siblings)
8 siblings, 1 reply; 11+ messages in thread
From: Philipp Zabel @ 2021-07-21 8:32 UTC (permalink / raw)
To: Rob Herring, devicetree
Cc: linux-kernel, Maxime Ripard, Chen-Yu Tsai, Thierry Reding,
Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Mark Brown, Robert Marko, Alessandro Zummo, Alexandre Belloni,
Ramesh Shanmugasundaram, G. Jaya Kumaran, Linus Walleij,
Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi, dri-devel,
linux-media, netdev, linux-rtc, alsa-devel
Hi Rob,
On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
Is this documented somewhere? If not, should it be? (Maybe in writing-
schema.rst -> Schema Contents -> examples?)
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
[...]
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
` (5 preceding siblings ...)
2021-07-21 8:32 ` Philipp Zabel
@ 2021-07-21 11:05 ` Oleksij Rempel
2021-07-21 14:26 ` Linus Walleij
2021-07-23 21:18 ` Rob Herring
8 siblings, 0 replies; 11+ messages in thread
From: Oleksij Rempel @ 2021-07-21 11:05 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, linux-kernel, Maxime Ripard, Chen-Yu Tsai,
Thierry Reding, Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Mark Brown, Robert Marko, Philipp Zabel, Alessandro Zummo,
Alexandre Belloni, Ramesh Shanmugasundaram, G. Jaya Kumaran,
Linus Walleij, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi, dri-devel,
linux-media, netdev, linux-rtc, alsa-devel
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
> avee-supply = <&ppvarp_lcd>;
> pp1800-supply = <&pp1800_lcd>;
> backlight = <&backlight_lcd0>;
> - status = "okay";
> port {
> panel_in: endpoint {
> remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
> clock-names = "pclk", "wrap", "phy", "axi";
> power-domains = <&mipi_pd>;
>
> - status = "disabled";
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
> power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> resets = <&cpg 513>;
> renesas,bonding = <&drif11>;
> - status = "disabled";
> };
>
> drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
> snps,mtl-rx-config = <&mtl_rx_setup>;
> snps,mtl-tx-config = <&mtl_tx_setup>;
> snps,tso;
> - status = "okay";
> -
> mdio0 {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
> ethernet@c8009000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc8009000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 4>;
> queue-txready = <&qmgr 21>;
> intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
> ethernet@c800c000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc800c000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 3>;
> queue-txready = <&qmgr 20>;
> intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
> # UART example on Raspberry Pi
> - |
> uart0 {
> - status = "okay";
> -
> nfc {
> compatible = "samsung,s3fwrn82";
>
> en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
> wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>
> - status = "okay";
> };
> };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>
> phy-mode = "gmii";
>
> - status = "disabled";
> -
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -148,32 +146,24 @@ examples:
> reg = <0x1>;
> phy-handle = <&phy_port0>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port2: port@2 {
> reg = <0x2>;
> phy-handle = <&phy_port1>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port3: port@3 {
> reg = <0x3>;
> phy-handle = <&phy_port2>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port4: port@4 {
> reg = <0x4>;
> phy-handle = <&phy_port3>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
> };
>
> @@ -183,34 +173,29 @@ examples:
>
> interrupt-parent = <&switch10>;
>
> - phy_port0: phy@0 {
> + phy_port0: ethernet-phy@0 {
> reg = <0x0>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port1: phy@1 {
> + phy_port1: ethernet-phy@1 {
> reg = <0x1>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port2: phy@2 {
> + phy_port2: ethernet-phy@2 {
> reg = <0x2>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port3: phy@3 {
> + phy_port3: ethernet-phy@3 {
> reg = <0x3>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port4: phy@4 {
> + phy_port4: ethernet-phy@4 {
> reg = <0x4>;
> interrupts = <0>;
> - status = "disabled";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>
> rt6245@34 {
> compatible = "richtek,rt6245";
> - status = "okay";
> reg = <0x34>;
> enable-gpios = <&gpio26 2 0>;
>
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
> regulator-min-microvolt = <1500000>;
> regulator-max-microvolt = <3000000>;
> regulator-always-on;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
> resets = <&iomcu_rst 0x20 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
> };
>
> pwm: pwm@e0d00000 {
> - status = "disabled";
> compatible = "intel,lgm-pwm";
> reg = <0xe0d00000 0x30>;
> clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
> rtc@51 {
> compatible = "microcrystal,rv3032";
> reg = <0x51>;
> - status = "okay";
> pinctrl-0 = <&rtc_nint_pins>;
> interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
> trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
> soc_ctrl0: soc-controller@f0000000 {
> compatible = "litex,soc-controller";
> reg = <0xf0000000 0xc>;
> - status = "okay";
> };
>
> ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
> pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> - status = "okay";
>
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
> dma-names = "tx";
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> - status = "okay";
> };
> };
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
> compatible = "ti,j721e-cpb-audio";
> model = "j721e-cpb";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
> compatible = "ti,j721e-cpb-ivi-audio";
> model = "j721e-cpb-ivi";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> --
> 2.27.0
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-21 8:32 ` Philipp Zabel
@ 2021-07-21 13:49 ` Rob Herring
0 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2021-07-21 13:49 UTC (permalink / raw)
To: Philipp Zabel
Cc: devicetree, linux-kernel, Maxime Ripard, Chen-Yu Tsai,
Thierry Reding, Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Mark Brown, Robert Marko, Alessandro Zummo, Alexandre Belloni,
Ramesh Shanmugasundaram, G. Jaya Kumaran, Linus Walleij,
Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi, dri-devel,
Linux Media Mailing List, netdev,
open list:REAL TIME CLOCK (RTC) SUBSYSTEM, Linux-ALSA
On Wed, Jul 21, 2021 at 2:33 AM Philipp Zabel <p.zabel@pengutronix.de> wrote:
>
> Hi Rob,
>
> On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> > There's no reason to have "status" properties in examples. "okay" is the
> > default, and "disabled" turns off some schema checks ('required'
> > specifically).
>
> Is this documented somewhere? If not, should it be? (Maybe in writing-
> schema.rst -> Schema Contents -> examples?)
I don't think it is. I'm writing a schema for it which works for both
those that read documentation and those that don't.
Rob
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
` (6 preceding siblings ...)
2021-07-21 11:05 ` Oleksij Rempel
@ 2021-07-21 14:26 ` Linus Walleij
2021-07-23 21:18 ` Rob Herring
8 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2021-07-21 14:26 UTC (permalink / raw)
To: Rob Herring
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Maxime Ripard, Chen-Yu Tsai, Thierry Reding,
Sam Ravnborg, Rui Miguel Silva, Laurent Pinchart,
Mauro Carvalho Chehab, David S. Miller, Jakub Kicinski,
Mark Brown, Robert Marko, Philipp Zabel, Alessandro Zummo,
Alexandre Belloni, Ramesh Shanmugasundaram, G. Jaya Kumaran,
Oleksij Rempel, ChiYuan Huang, Wei Xu, Dilip Kota, Karol Gugala,
Mateusz Holenko, Olivier Moysan, Peter Ujfalusi,
open list:DRM PANEL DRIVERS, Linux Media Mailing List, netdev,
linux-rtc,
moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...
On Tue, Jul 20, 2021 at 7:20 PM Rob Herring <robh@kernel.org> wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
All of mine are mistakes anyway.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Thanks for fixing this up.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Remove "status" from schema examples
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
` (7 preceding siblings ...)
2021-07-21 14:26 ` Linus Walleij
@ 2021-07-23 21:18 ` Rob Herring
8 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2021-07-23 21:18 UTC (permalink / raw)
To: Rob Herring
Cc: Chen-Yu Tsai, Oleksij Rempel, Wei Xu, Dilip Kota, dri-devel,
netdev, Robert Marko, Karol Gugala, linux-media, devicetree,
Jakub Kicinski, linux-rtc, Maxime Ripard, G. Jaya Kumaran,
Mateusz Holenko, Thierry Reding, Ramesh Shanmugasundaram,
alsa-devel, Alexandre Belloni, Rui Miguel Silva, Mark Brown,
Mauro Carvalho Chehab, Philipp Zabel, ChiYuan Huang,
Peter Ujfalusi, David S. Miller, Alessandro Zummo,
Laurent Pinchart, Sam Ravnborg, linux-kernel, Linus Walleij,
Olivier Moysan
On Tue, 20 Jul 2021 11:20:25 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
Applied, thanks!
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-07-23 21:18 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-20 17:20 [PATCH] dt-bindings: Remove "status" from schema examples Rob Herring
2021-07-20 17:49 ` Mauro Carvalho Chehab
2021-07-20 17:58 ` Laurent Pinchart
2021-07-20 18:15 ` Rui Miguel Silva
2021-07-20 18:40 ` Alexandre Belloni
2021-07-20 20:33 ` Mark Brown
2021-07-21 8:32 ` Philipp Zabel
2021-07-21 13:49 ` Rob Herring
2021-07-21 11:05 ` Oleksij Rempel
2021-07-21 14:26 ` Linus Walleij
2021-07-23 21:18 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).