LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] regulator: ab8500: Remove AB8505 USB regulator
@ 2019-11-06 17:31 Stephan Gerhold
  2019-11-06 17:31 ` [PATCH 2/2] regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id Stephan Gerhold
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Stephan Gerhold @ 2019-11-06 17:31 UTC (permalink / raw)
  To: Mark Brown; +Cc: Liam Girdwood, linux-kernel, Stephan Gerhold, Linus Walleij

The USB regulator was removed for AB8500 in
commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator").
It was then added for AB8505 in
commit 547f384f33db ("regulator: ab8500: add support for ab8505").

However, there was never an entry added for it in
ab8505_regulator_match. This causes all regulators after it
to be initialized with the wrong device tree data, eventually
leading to an out-of-bounds array read.

Given that it is not used anywhere in the kernel, it seems
likely that similar arguments against supporting it exist for
AB8505 (it is controlled by hardware).

Therefore, simply remove it like for AB8500 instead of adding
an entry in ab8505_regulator_match.

Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 drivers/regulator/ab8500.c       | 17 -----------------
 include/linux/regulator/ab8500.h |  1 -
 2 files changed, 18 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index efb2f01a9101..f60e1b26c2d2 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -953,23 +953,6 @@ static struct ab8500_regulator_info
 		.update_val_idle	= 0x82,
 		.update_val_normal	= 0x02,
 	},
-	[AB8505_LDO_USB] = {
-		.desc = {
-			.name           = "LDO-USB",
-			.ops            = &ab8500_regulator_mode_ops,
-			.type           = REGULATOR_VOLTAGE,
-			.id             = AB8505_LDO_USB,
-			.owner          = THIS_MODULE,
-			.n_voltages     = 1,
-			.volt_table	= fixed_3300000_voltage,
-		},
-		.update_bank            = 0x03,
-		.update_reg             = 0x82,
-		.update_mask            = 0x03,
-		.update_val		= 0x01,
-		.update_val_idle	= 0x03,
-		.update_val_normal	= 0x01,
-	},
 	[AB8505_LDO_AUDIO] = {
 		.desc = {
 			.name		= "LDO-AUDIO",
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 7cf8f797e13a..505e94a6e3e8 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -37,7 +37,6 @@ enum ab8505_regulator_id {
 	AB8505_LDO_AUX6,
 	AB8505_LDO_INTCORE,
 	AB8505_LDO_ADC,
-	AB8505_LDO_USB,
 	AB8505_LDO_AUDIO,
 	AB8505_LDO_ANAMIC1,
 	AB8505_LDO_ANAMIC2,
-- 
2.23.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-06 17:31 [PATCH 1/2] regulator: ab8500: Remove AB8505 USB regulator Stephan Gerhold
2019-11-06 17:31 ` [PATCH 2/2] regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id Stephan Gerhold
2019-11-07  8:02   ` Linus Walleij
2019-11-07 13:13   ` Applied "regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id" to the regulator tree Mark Brown
2019-11-07  8:02 ` [PATCH 1/2] regulator: ab8500: Remove AB8505 USB regulator Linus Walleij
2020-01-10  8:02   ` Naresh Kamboju
2020-01-10  8:16     ` Greg Kroah-Hartman
2019-11-07 13:13 ` Applied "regulator: ab8500: Remove AB8505 USB regulator" to the regulator tree Mark Brown

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git