LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Doug Anderson <dianders@chromium.org>
To: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	cang@codeaurora.org, Evan Green <evgreen@chromium.org>,
	linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	sayalil@codeaurora.org, Asutosh Das <asutoshd@codeaurora.org>,
	devicetree@vger.kernel.org, liwei213@huawei.com,
	LKML <linux-kernel@vger.kernel.org>,
	Mathieu Malaterre <malat@debian.org>,
	Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH] dt-bindings: ufs: Fix the compatible string definition
Date: Wed, 17 Oct 2018 09:11:43 -0700
Message-ID: <CAD=FV=XSjfRSHP6B6GtiTqrQuUZaoA=hZNW_L1=71MU9fEXpDQ@mail.gmail.com> (raw)
In-Reply-To: <1ce7b24c-b154-4ce6-2b4c-9eb0fd0d71cb@codeaurora.org>

Hi,

On Tue, Oct 16, 2018 at 11:28 PM Vivek Gautam
<vivek.gautam@codeaurora.org> wrote:
>
> Hi Doug,
>
>
> On 10/16/2018 10:29 PM, Doug Anderson wrote:
> > Hi,
> >
> > On Mon, Oct 15, 2018 at 10:51 PM Vivek Gautam
> > <vivek.gautam@codeaurora.org> wrote:
> >>>> P.S.: While you are at it, can you please move 'ufs-qcom.txt'
> >>>> to Documentation/devicetree/bindings/phy/qcom,ufs-phy.txt.
> >>>> The current name and file location is misleading.
> >>> I'd rather someone at Qualcomm do this.  Do you have a suggested
> >>> person?  The reason I feel that Qualcomm needs to get involved is that
> >>> I see that when I look at the file you refer to says it's for:
> >>>
> >>>    "qcom,ufs-phy-qmp-20nm" for 20nm ufs phy,
> >>>    "qcom,ufs-phy-qmp-14nm" for legacy 14nm ufs phy,
> >>>    "qcom,msm8996-ufs-phy-qmp-14nm" for 14nm ufs phy
> >>>    present on MSM8996 chipset.
> >>>
> >>> ...but there's another Qualcomm file, 'qcom-qmp-phy.txt'.  That
> >>> handles the compatible string:
> >>>
> >>>         "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
> >>>
> >>> So I'm a little confused.  Should the SDM845 UFS PHY been handled by
> >>> the older UFS PHY driver?  ...or should all the older UFS PHYs be
> >>> moved to be handled by the newer QMP PHY driver?  ...or are they
> >>> really different hardware blocks, in which case how would you describe
> >>> the difference (both are described as UFS QMP PHYs I think).
> >> As you rightly said "ufs/ufs-qcom.txt" describes the bindings for
> >> 14nm, and 20nm ufs phy. These phys are however handled by the older
> >> ufs phy driver present at:
> >> drivers/phy/qualcomm/phy-qcom-ufs-qmp-{14nm,20nm}.c
> >> The sdm845 UFS phy driver is handled by the new consolidated qmp phy
> >> driver: drivers/phy/qualcomm/phy-qcom-qmp.c whose bindings are
> >> described by 'qcom-qmp-phy.txt'.
> >> We didn't attempt to move the 14nm phy to new driver as we already had
> >> 8996 using the bindings.
> >>
> >> So, really these are two separate drivers with different bindings. I
> >> believe it should be okay to move the file. If you are fine, I can
> >> attempt to post a small patch to do that.
> > I guess what I should have said was that the new name you're proposing
> > "qcom,ufs-phy.txt" is confusing and opening the file doesn't help
> > clarify things.  The name and the binding make it sound like this is
> > _the_ file to look at for Qualcomm UFS PHYs.  ...and then you look in
> > the examples in the file and it seems that this even includes Qualcomm
> > QMP PHYs for UFS.
> >
> > ...so while I agree that the file "ufs-qcom.txt" needs to be moved to
> > the "PHY" directory, I think at the same time we need to change the
> > name of the file and maybe the contents to disambiguate which things
> > belong in this file vs. the "qcom-qmp-phy.txt".  ...and I feel like
> > someone at Qualcomm will have the most information to properly do
> > that.
> >
> > For instance, you could call the older bindings
> > "qcom-qmp-phy-14nm-20nm.txt" or something like that.
>
> Sure, I get your point. I will propose something that removes the confusion.
>
> >
> > One point of clarification I'd like to know is if there's really a
> > good reason to have two drivers here.  Certainly if the hardware is
> > really different then a new driver can make sense, but if there are
> > two drivers for arbitrary reasons then maybe they should be combined
> > into one eventually?
>
> Right, the 14nm phy driver can be happily merged into the new qmp-phy
> driver.
> But we should take care of older bindings. Removing the driver will break
> things on targets with older bindings, precisely 8996.
>
> 20nm is bit tricky as it exported few APIs directly to ufs host
> controller, and
> that's the reason we have declared that as BROKEN after the ufs cleanup.
> So, until we are really in a kill mode, the old ufs-phy driver will have
> to live.

OK, sounds like a plan.  I'll assume you're posting the patch to move
the old PHY bindings and add some of the above information to them so
people aren't confused.

...all this is sort off the original subject, though.  ;-)  Just a
quick summary here is that nothing suggests ${SUBJECT} patch shouldn't
land and all the additional discussion has been about making further
improvements to the bindings situation for UFS on Qualcomm.

-Doug

  reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-12 21:39 Douglas Anderson
2018-10-15 15:23 ` Vivek Gautam
2018-10-15 17:23   ` Doug Anderson
2018-10-16  5:51     ` Vivek Gautam
2018-10-16 16:59       ` Doug Anderson
2018-10-17  6:28         ` Vivek Gautam
2018-10-17 16:11           ` Doug Anderson [this message]
2018-10-18  7:52             ` Vivek Gautam
2019-01-23 22:17               ` Evan Green
2018-10-18  0:42 ` Rob Herring
2019-02-06 13:59 ` Marc Gonzalez
2019-02-08 22:40   ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAD=FV=XSjfRSHP6B6GtiTqrQuUZaoA=hZNW_L1=71MU9fEXpDQ@mail.gmail.com' \
    --to=dianders@chromium.org \
    --cc=asutoshd@codeaurora.org \
    --cc=cang@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liwei213@huawei.com \
    --cc=malat@debian.org \
    --cc=mark.rutland@arm.com \
    --cc=martin.petersen@oracle.com \
    --cc=robh+dt@kernel.org \
    --cc=sayalil@codeaurora.org \
    --cc=vivek.gautam@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git