linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Li Yang <leoyang.li@nxp.com>
To: Ran Wang <ran.wang_1@nxp.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
	<linux-arm-kernel@lists.infradead.org>,
	lkml <linux-kernel@vger.kernel.org>, Peng Ma <peng.ma@nxp.com>
Subject: Re: [PATCH v6] soc: fsl: enable acpi support in RCPM driver
Date: Tue, 6 Apr 2021 16:45:29 -0500	[thread overview]
Message-ID: <CADRPPNRv_T9o=Kg4dCJ6jFPxOWMY24wgDXCzyTpz3oh_yL+4Tw@mail.gmail.com> (raw)
In-Reply-To: <20210312085822.12136-1-ran.wang_1@nxp.com>

On Fri, Mar 12, 2021 at 2:56 AM Ran Wang <ran.wang_1@nxp.com> wrote:
>
> From: Peng Ma <peng.ma@nxp.com>
>
> This patch enables ACPI support in RCPM driver.
>
> Signed-off-by: Peng Ma <peng.ma@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> Change in v6:
>  - Remove copyright udpate to rebase on latest mainline
>
> Change in v5:
>  - Fix panic when dev->of_node is null
>
> Change in v4:
>  - Make commit subject more accurate
>  - Remove unrelated new blank line
>
> Change in v3:
>  - Add #ifdef CONFIG_ACPI for acpi_device_id
>  - Rename rcpm_acpi_imx_ids to rcpm_acpi_ids
>
> Change in v2:
>  - Update acpi_device_id to fix conflict with other driver
>
>  drivers/soc/fsl/rcpm.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
> index 4ace28cab314..7aa997b932d1 100644
> --- a/drivers/soc/fsl/rcpm.c
> +++ b/drivers/soc/fsl/rcpm.c
> @@ -13,6 +13,7 @@
>  #include <linux/slab.h>
>  #include <linux/suspend.h>
>  #include <linux/kernel.h>
> +#include <linux/acpi.h>
>
>  #define RCPM_WAKEUP_CELL_MAX_SIZE      7
>
> @@ -78,10 +79,14 @@ static int rcpm_pm_prepare(struct device *dev)
>                                 "fsl,rcpm-wakeup", value,
>                                 rcpm->wakeup_cells + 1);
>
> -               /*  Wakeup source should refer to current rcpm device */
> -               if (ret || (np->phandle != value[0]))
> +               if (ret)
>                         continue;
>
> +               if (is_of_node(dev->fwnode))
> +                       /*  Should refer to current rcpm device */
> +                       if (np->phandle != value[0])
> +                               continue;

It looks like that we assume that in the ACPI scenario there will only
be one RCPM controller and all devices are controlled by this single
PM controller.  This probably is true for all existing SoCs with a
RCPM.  But since the driver tried to support multiple RCPMs, maybe we
should continue to support multiple RCPM controllers or at least
mention that in the comment.

> +
>                 /* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
>                  * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
>                  * of wakeup source IP contains an integer array: <phandle to
> @@ -172,10 +177,19 @@ static const struct of_device_id rcpm_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, rcpm_of_match);
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id rcpm_acpi_ids[] = {
> +       {"NXP0015",},
> +       { }
> +};
> +MODULE_DEVICE_TABLE(acpi, rcpm_acpi_ids);
> +#endif
> +
>  static struct platform_driver rcpm_driver = {
>         .driver = {
>                 .name = "rcpm",
>                 .of_match_table = rcpm_of_match,
> +               .acpi_match_table = ACPI_PTR(rcpm_acpi_ids),
>                 .pm     = &rcpm_pm_ops,
>         },
>         .probe = rcpm_probe,
> --
> 2.25.1
>

  reply	other threads:[~2021-04-06 21:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12  8:58 [PATCH v6] soc: fsl: enable acpi support in RCPM driver Ran Wang
2021-04-06 21:45 ` Li Yang [this message]
2021-04-07  1:31   ` Ran Wang
2021-04-07  3:38     ` Leo Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CADRPPNRv_T9o=Kg4dCJ6jFPxOWMY24wgDXCzyTpz3oh_yL+4Tw@mail.gmail.com' \
    --to=leoyang.li@nxp.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=peng.ma@nxp.com \
    --cc=ran.wang_1@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).