linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Duc Dang <dhdang@apm.com>
To: Christopher Covington <cov@codeaurora.org>
Cc: Dongdong Liu <liudongdong3@huawei.com>,
	Bjorn Helgaas <helgaas@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Will Deacon <will.deacon@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Rafael Wysocki <rafael@kernel.org>,
	Hanjun Guo <hanjun.guo@linaro.org>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
	okaya@codeaurora.org, Jayachandran C <jchandra@broadcom.com>,
	Tomasz Nowicki <tn@semihalf.com>,
	robert.richter@caviumnetworks.com,
	Marcin Wojtas <mw@semihalf.com>,
	Liviu Dudau <Liviu.Dudau@arm.com>,
	David Daney <ddaney@caviumnetworks.com>,
	Yijing Wang <wangyijing@huawei.com>,
	Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>,
	Mark Salter <msalter@redhat.com>,
	linux-pci@vger.kernel.org,
	linux-arm <linux-arm-kernel@lists.infradead.org>,
	linux-acpi@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linaro-acpi@lists.linaro.org, Jon Masters <jcm@redhat.com>,
	Andrea Gallo <andrea.gallo@linaro.org>,
	jeremy.linton@arm.com,
	Gabriele Paoloni <gabriele.paoloni@huawei.com>,
	charles.chenxin@huawei.com, linuxarm@huawei.com
Subject: Re: [RFC PATCH V2 1/2] ACPI/PCI: Match PCI config space accessors against platfrom specific ECAM quirks
Date: Mon, 13 Jun 2016 13:57:51 -0700	[thread overview]
Message-ID: <CADaLNDkfKxxXWmG3eAawH1H=B+4ia6ZYh41anjTuOdTWGbhfNg@mail.gmail.com> (raw)
In-Reply-To: <575ED57F.6050503@codeaurora.org>

On Mon, Jun 13, 2016 at 8:47 AM, Christopher Covington
<cov@codeaurora.org> wrote:
> Hi Dongdong,
>
> On 06/13/2016 09:02 AM, Dongdong Liu wrote:
>> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
>> index d3c3e85..49612b3 100644
>> --- a/drivers/acpi/pci_mcfg.c
>> +++ b/drivers/acpi/pci_mcfg.c
>> @@ -22,6 +22,10 @@
>>  #include <linux/kernel.h>
>>  #include <linux/pci.h>
>>  #include <linux/pci-acpi.h>
>> +#include <linux/pci-ecam.h>
>> +
>> +/* Root pointer to the mapped MCFG table */
>> +static struct acpi_table_mcfg *mcfg_table;
>>
>>  /* Structure to hold entries from the MCFG table */
>>  struct mcfg_entry {
>> @@ -35,6 +39,38 @@ struct mcfg_entry {
>>  /* List to save mcfg entries */
>>  static LIST_HEAD(pci_mcfg_list);
>>
>> +extern struct pci_cfg_fixup __start_acpi_mcfg_fixups[];
>> +extern struct pci_cfg_fixup __end_acpi_mcfg_fixups[];
>> +
>> +struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root *root)
>> +{
>> +     int bus_num = root->secondary.start;
>> +     int domain = root->segment;
>> +     struct pci_cfg_fixup *f;
>> +
>> +     if (!mcfg_table)
>> +             return &pci_generic_ecam_ops;
>> +
>> +     /*
>> +      * Match against platform specific quirks and return corresponding
>> +      * CAM ops.
>> +      *
>> +      * First match against PCI topology <domain:bus> then use OEM ID and
>> +      * OEM revision from MCFG table standard header.
>> +      */
>> +     for (f = __start_acpi_mcfg_fixups; f < __end_acpi_mcfg_fixups; f++) {
>> +             if ((f->domain == domain || f->domain == PCI_MCFG_DOMAIN_ANY) &&
>> +                 (f->bus_num == bus_num || f->bus_num == PCI_MCFG_BUS_ANY) &&
>> +                 (!strncmp(f->oem_id, mcfg_table->header.oem_id,
>> +                           ACPI_OEM_ID_SIZE)) &&
>> +                 (!strncmp(f->oem_table_id, mcfg_table->header.oem_table_id,
>> +                           ACPI_OEM_TABLE_ID_SIZE)))
>
> This would just be a small convenience, but if the character count used here were
>
> min(strlen(f->oem_id), ACPI_OEM_ID_SIZE)
>
> then the parameters to DECLARE_ACPI_MCFG_FIXUP macro could be substrings and
> wouldn't need to be padded out to the full length.
>
>> +                     return f->ops;
>> +     }
>> +     /* No quirks, use ECAM */
>> +     return &pci_generic_ecam_ops;
>> +}
>
>> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
>> index 7d63a66..088a1da 100644
>> --- a/include/linux/pci-acpi.h
>> +++ b/include/linux/pci-acpi.h
>> @@ -25,6 +25,7 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
>>  extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>>
>>  extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
>> +extern struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root *root);
>>
>>  static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
>>  {
>> @@ -72,6 +73,25 @@ struct acpi_pci_root_ops {
>>       int (*prepare_resources)(struct acpi_pci_root_info *info);
>>  };
>>
>> +struct pci_cfg_fixup {
>> +     struct pci_ecam_ops *ops;
>> +     char *oem_id;
>> +     char *oem_table_id;
>> +     int domain;
>> +     int bus_num;
>> +};
>> +
>> +#define PCI_MCFG_DOMAIN_ANY  -1
>> +#define PCI_MCFG_BUS_ANY     -1
>> +
>> +/* Designate a routine to fix up buggy MCFG */
>> +#define DECLARE_ACPI_MCFG_FIXUP(ops, oem_id, oem_table_id, dom, bus) \
>> +     static const struct pci_cfg_fixup                               \
>> +     __mcfg_fixup_##oem_id##oem_table_id##dom##bus                   \
>
> I'm not entirely sure that this is the right fix--I'm pretty blindly
> following a GCC documentation suggestion [1]--but removing the first two
> preprocessor concatenation operators "##" solved the following build error
> for me.
>
> include/linux/pci-acpi.h:90:2: error: pasting "__mcfg_fixup_" and ""QCOM"" does not give a valid preprocessing token
>   __mcfg_fixup_##oem_id##oem_table_id##dom##bus   \

I think the problem is gcc is not happy with quoted string when
processing these tokens
(""QCOM"", the extra "" are added by gcc). So should we not concat
string tokens and
use the fixup definition in v1 of this RFC:
/* Designate a routine to fix up buggy MCFG */
#define DECLARE_ACPI_MCFG_FIXUP(ops, oem_id, rev, dom, bus)             \
        static const struct pci_cfg_fixup __mcfg_fixup_##system##dom##bus\
         __used __attribute__((__section__(".acpi_fixup_mcfg"),         \
                                aligned((sizeof(void *))))) =           \
        { ops, oem_id, rev, dom, bus };

Regards,
Duc Dang.


>   ^
> arch/arm64/kernel/pci.c:225:1: note: in expansion of macro ‘DECLARE_ACPI_MCFG_FIXUP’
>  DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>  ^
> arch/arm64/kernel/pci.c:225:44: error: pasting ""QCOM"" and ""QDF2432"" does not give a valid preprocessing token
>  DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>                                             ^
> include/linux/pci-acpi.h:90:17: note: in definition of macro ‘DECLARE_ACPI_MCFG_FIXUP’
>   __mcfg_fixup_##oem_id##oem_table_id##dom##bus   \
>                  ^
> arch/arm64/kernel/pci.c:225:52: error: pasting ""QDF2432"" and "PCI_MCFG_DOMAIN_ANY" does not give a valid preprocessi
> ng token
>  DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>                                                     ^
> include/linux/pci-acpi.h:90:25: note: in definition of macro ‘DECLARE_ACPI_MCFG_FIXUP’
>   __mcfg_fixup_##oem_id##oem_table_id##dom##bus   \
>                          ^
> arch/arm64/kernel/pci.c:225:44: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before string constant
>  DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>                                             ^
> include/linux/pci-acpi.h:90:17: note: in definition of macro ‘DECLARE_ACPI_MCFG_FIXUP’
>   __mcfg_fixup_##oem_id##oem_table_id##dom##bus   \
>                  ^
> make[1]: *** [arch/arm64/kernel/pci.o] Error 1
> make: *** [arch/arm64/kernel] Error 2
>
> 1. https://gcc.gnu.org/onlinedocs/cpp/Concatenation.html#Concatenation
>
>> +     __used  __attribute__((__section__(".acpi_fixup_mcfg"),         \
>> +                             aligned((sizeof(void *))))) =           \
>> +     { ops, oem_id, oem_table_id, dom, bus };
>> +
>>  extern int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info);
>>  extern struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
>>                                           struct acpi_pci_root_ops *ops,
>>
>
> Thanks,
> Cov
>
> --
> Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project

  reply	other threads:[~2016-06-13 20:58 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-13 13:02 [RFC PATCH V2 0/2] ECAM quirks handling for ARM64 platforms Dongdong Liu
2016-06-13 13:02 ` [RFC PATCH V2 1/2] ACPI/PCI: Match PCI config space accessors against platfrom specific ECAM quirks Dongdong Liu
2016-06-13 13:54   ` Gabriele Paoloni
2016-06-13 14:02     ` Sinan Kaya
2016-06-13 14:29       ` Gabriele Paoloni
2016-06-13 15:12         ` okaya
2016-06-13 15:59           ` Jeffrey Hugo
2016-06-13 21:07             ` Duc Dang
2016-06-16  6:31     ` [Linaro-acpi] " Jon Masters
2016-06-16  7:45       ` Duc Dang
2016-06-16  7:54         ` Jon Masters
2016-06-13 15:47   ` Christopher Covington
2016-06-13 20:57     ` Duc Dang [this message]
2016-06-14  5:51       ` Dongdong Liu
2016-06-14  9:00         ` Duc Dang
2016-06-14  9:45           ` Dongdong Liu
2016-06-14 11:52             ` Tomasz Nowicki
2016-06-14 17:43               ` Duc Dang
2016-06-13 13:02 ` [RFC PATCH V2 2/2] ARM64/PCI: Start using quirks handling for ACPI based PCI host controller Dongdong Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CADaLNDkfKxxXWmG3eAawH1H=B+4ia6ZYh41anjTuOdTWGbhfNg@mail.gmail.com' \
    --to=dhdang@apm.com \
    --cc=Liviu.Dudau@arm.com \
    --cc=Lorenzo.Pieralisi@arm.com \
    --cc=Suravee.Suthikulpanit@amd.com \
    --cc=andrea.gallo@linaro.org \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=charles.chenxin@huawei.com \
    --cc=cov@codeaurora.org \
    --cc=ddaney@caviumnetworks.com \
    --cc=gabriele.paoloni@huawei.com \
    --cc=hanjun.guo@linaro.org \
    --cc=helgaas@kernel.org \
    --cc=jchandra@broadcom.com \
    --cc=jcm@redhat.com \
    --cc=jeremy.linton@arm.com \
    --cc=linaro-acpi@lists.linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=liudongdong3@huawei.com \
    --cc=msalter@redhat.com \
    --cc=mw@semihalf.com \
    --cc=okaya@codeaurora.org \
    --cc=rafael@kernel.org \
    --cc=robert.richter@caviumnetworks.com \
    --cc=tn@semihalf.com \
    --cc=wangyijing@huawei.com \
    --cc=will.deacon@arm.com \
    --subject='Re: [RFC PATCH V2 1/2] ACPI/PCI: Match PCI config space accessors against platfrom specific ECAM quirks' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).