From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752187AbcLEUwE (ORCPT ); Mon, 5 Dec 2016 15:52:04 -0500 Received: from mail-wm0-f65.google.com ([74.125.82.65]:35221 "EHLO mail-wm0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751427AbcLEUv7 (ORCPT ); Mon, 5 Dec 2016 15:51:59 -0500 MIME-Version: 1.0 In-Reply-To: <19bc0efe-bf1f-8251-7ff2-4dc5a5b61fce@gmail.com> References: <1480183585-592-1-git-send-email-yamada.masahiro@socionext.com> <1480183585-592-40-git-send-email-yamada.masahiro@socionext.com> <20161201160511.ahlibszokg547wxk@rob-hp-laptop> <563ec35c-0964-b696-0f5b-79ec38d4620b@gmail.com> <19bc0efe-bf1f-8251-7ff2-4dc5a5b61fce@gmail.com> From: Dinh Nguyen Date: Mon, 5 Dec 2016 14:51:45 -0600 Message-ID: Subject: Re: [PATCH 39/39] mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants To: Marek Vasut Cc: Masahiro Yamada , Rob Herring , "linux-mtd@lists.infradead.org" , "devicetree@vger.kernel.org" , Linux Kernel Mailing List , Boris Brezillon , Brian Norris , Richard Weinberger , David Woodhouse , Cyrille Pitchen , Mark Rutland , Dinh Nguyen , Alan Tull , Chin Liang See , Dinh Nguyen Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sun, Dec 4, 2016 at 10:22 PM, Marek Vasut wrote: > On 12/05/2016 05:10 AM, Masahiro Yamada wrote: >> Hi Marek, >> >> >> 2016-12-05 12:44 GMT+09:00 Marek Vasut : >>> On 12/05/2016 04:30 AM, Masahiro Yamada wrote: >>>> Hi Dinh, >>>> >>>> >>>> 2016-12-04 7:08 GMT+09:00 Dinh Nguyen : >>>>> Hi, >>>>> >>>>> On Fri, Dec 2, 2016 at 8:49 PM, Marek Vasut wrote: >>>>>> On 12/03/2016 03:41 AM, Masahiro Yamada wrote: >>>>>>> Hi Rob, >>>>>> >>>>>> Hi! >>>>>> >>>>>>> 2016-12-03 1:26 GMT+09:00 Rob Herring : >>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> (Plan A) >>>>>>>>> "denali,socfpga-nand" (for Altera SOCFPGA variant) >>>>>>>>> "denali,uniphier-nand-v1" (for old Socionext UniPhier family variant) >>>>>>>>> "denali,uniphier-nand-v2" (for new Socionext UniPhier family variant) >>>>>>>>> >>>>>>>>> (Plan B) >>>>>>>>> "altera,denali-nand" (for Altera SOCFPGA variant) >>>>>>>>> "socionext,denali-nand-v5a" (for old Socionext UniPhier family variant) >>>>>>>>> "socionext,denali-nand-v5b" (for new Socionext UniPhier family variant) >>>>>>> >>>>>>>> Let the Altera folks worry about their stuff. At least for soft IP in >>>>>>>> FPGA, it's a bit of a special case. The old string can remain as bad >>>>>>>> as it is. >>>>>>> >>>>>>> >>>>>>> Hmm, I am not sure if this IP would fit in FPGA >>>>>>> (to use it along with NIOS-II?) >>>>>>> >>>>>>> (even if it happened, nothing of this IP would be customizable on users' side. >>>>>>> When buying the IP, SoC vendors submit a list of desired features. >>>>>>> Denali (now Cadence) generates the RTL according to the configuration sheet. >>>>>>> The function is fixed at this point. So, generic compatible would be >>>>>>> useless anyway.) >>>>>>> >>>>>>> >>>>>>> If we are talking about SOCFPGA, >>>>>>> SOCFPGA is not only FPGA. Rather "SOC" + "FPGA". >>>>>>> It consists of two parts: >>>>>>> [1] SOC part (Cortex-A9 + various hard-wired peripherals such UART, >>>>>>> USB, SD, NAND, ...) >>>>>>> [2] FPGA part (User design logic) >>>>>>> >>>>>>> The Denali NAND controller is included in [1]. >>>>>>> So, as far as we talk about the Denali on SOCFPGA, >>>>>>> it is as hard-wired as Intel, Socionext's ones. >>>>>> >>>>>> That's correct, the Denali NAND IP in altera socfpga is a hardware >>>>>> block. You can make it available to the fabric too, but by default >>>>>> it's used by the ARM part of the chip, so for this discussion, you >>>>>> can forget that the FPGA part exists altogether. >>>>>> >>>>>> I would be in favor of plan B, since it seems to be the more often >>>>>> taken approach. A nice example is ci-hdrc: >>>>>> >>>>>> $ git grep compatible drivers/usb/chipidea/ >>>>>> >>>>>>>> I simply would do "socionext,uniphier-v5b-nand" (and v5a). >>>>>>>> The fact that it is denali is part of the documentation. >>>>>>>> >>>>>>> >>>>>>> Let me think about this. >>>>>>> >>>>>>> Socionext bought two version of Denali IP, >>>>>>> and we are now re-using the newer one (v5b) for several SoCs. >>>>>>> Socionext has some more product lines other than Uniphier SoC family, >>>>>>> perhaps wider re-use might happen in the future. >>>>>>> >>>>>>> At first, I included "uniphier" in compatible, but I am still wondering >>>>>>> if such a specific string is good or not. >>>>>>> >>>>>>> Also, comments from Altera engineers are appreciated. >>>>> >>>>> Sorry, it's taken me a while to add comments. My altera email is very spotty now >>>>> that the Intel merge is completed. Please use dinguyen@kernel.org for any future >>>>> communications. >>>>> >>>>> Yes, everything that is said so far for the NAND controller on the >>>>> SoCFPGA is correct. I added the binding for the controller a while >>>>> back, but unfortunately, we never added the NAND interface to the >>>>> devkit, so we did not do much in terms of enabling it. >>>>> >>>>> I think the only SoCFPGA board I know that has the NAND interface active is >>>>> the TRCom board, but I have never seen that board. >>>>> >>>>> I don't have any strong opinions on this matter, just as long as the >>>>> original binding >>>>> "denali,denali-nand-dt" is kept, and I think Rob was ok with keeping >>>>> that binding. >>>>> >>>> >>>> I am proposing to add "altera,denali-nand" for Altera. >>>> For what, do you need the generic compatible? >>>> This IP has no default for it to fallback to. >>> >>> IMO just for compatibility reasons with old DTs . >> >> We generally contribute for >> a "working driver" (at least, should be functional to some extent) >> and "DT binding" bundled together. >> >> However, Altera upstreamed the DT binding first >> (then some parts of the DT binding turned out wrong), >> but they did not upstream needed driver changes in the end. >> >> So, the mainline driver has never worked on SOCFPGA, right? > > Most likely it never worked, yes. > Right, looking through our downstream support, we may need to upstream a few changes to make upstream driver work on SoCFPGA. >> Removing "denali,denali-nand-dt" is not breakage at all, >> so I do not owe anything to them, right? > > I don't think I'm really qualified to answer this one. But, there is > drivers/mtd/nand/denali_dt.c , which handles this compatible string > and it's documented in > Documentation/devicetree/bindings/mtd/denali-nand.txt, so doesn't that > make it part of the ABI ? I think we should > at least keep it as a fallback, that should be pretty harmless. > I would like to propose "altr,denali-nand" as the binding we use to support the driver going forward on SoCFPGA hardware. It's pretty much the same as "altera,denali-nand", just with the correct vendor prefix. If we can please keep, "denali,denali-nand-dt" only because SoCFPGA is using this binding downstream, but I know that is a weak argument. Dinh