From: ChiYuan Huang <u0084500@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>, cy_huang <cy_huang@richtek.com>,
lkml <linux-kernel@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>
Subject: Re: [PATCH v2 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
Date: Tue, 8 Dec 2020 22:57:17 +0800 [thread overview]
Message-ID: <CADiBU3-fKrGEUDD90nnLqeUP9wUth6_oOnn4THw2iZC4=yF7Zw@mail.gmail.com> (raw)
In-Reply-To: <20201207164247.GB398093@robh.at.kernel.org>
Rob Herring <robh@kernel.org> 於 2020年12月8日 週二 上午12:42寫道:
>
> On Fri, Dec 04, 2020 at 12:06:33AM +0800, cy_huang wrote:
> > From: ChiYuan Huang <cy_huang@richtek.com>
> >
> > Adds DT binding document for Richtek RT4831 backlight.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> > ---
> > .../leds/backlight/richtek,rt4831-backlight.yaml | 86 ++++++++++++++++++++++
> > 1 file changed, 86 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> > new file mode 100644
> > index 00000000..df1439a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Richtek RT4831 Backlight
> > +
> > +maintainers:
> > + - ChiYuan Huang <cy_huang@richtek.com>
> > +
> > +description: |
> > + RT4831 is a mutifunctional device that can provide power to the LCD display
> > + and LCD backlight.
> > +
> > + For the LCD backlight, it can provide four channel WLED driving capability.
> > + Each channel driving current is up to 30mA
> > +
> > + Datasheet is available at
> > + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
> > +
> > +properties:
> > + compatible:
> > + const: richtek,rt4831-backlight
> > +
> > + default-brightness:
> > + description: |
> > + The default brightness that applied to the system on start-up.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + minimum: 0
> > + maximum: 2048
> > +
> > + max-brightness:
> > + description: |
> > + The max brightness for the H/W limit
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + minimum: 0
> > + maximum: 2048
> > +
> > + richtek,pwm-enable:
> > + description: |
> > + Specify the backlight dimming following by PWM duty or by SW control.
> > + type: boolean
> > +
> > + richtek,bled-ovp-sel:
> > + description: |
> > + Backlight OVP level selection, currently support 17V/21V/25V/29V.
> > + $ref: /schemas/types.yaml#/definitions/uint8
> > + default: 1
> > + minimum: 0
> > + maximum: 3
> > +
> > + richtek,channel-use:
> > + description: |
> > + Backlight LED channel to be used.
> > + BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable.
> > + $ref: /schemas/types.yaml#/definitions/uint8
> > + minimum: 1
> > + maximum: 15
> > +
> > +required:
> > + - compatible
> > + - richtek,channel-use
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/leds/rt4831-backlight.h>
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + rt4831@11 {
> > + compatible = "richtek,rt4831";
> > + reg = <0x11>;
> > +
> > + backlight {
> > + compatible = "richtek,rt4831-backlight";
> > + default-brightness = <1024>;
> > + max-brightness = <2048>;
> > + richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>;
> > + richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>;
> > + };
> > + };
>
> Just do 1 complete example in the mfd binding.
>
Ack.
> > + };
> > --
> > 2.7.4
> >
next prev parent reply other threads:[~2020-12-08 14:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-03 16:06 [PATCH v2 1/4] mfd: rt4831: Adds support for Richtek RT4831 MFD core cy_huang
2020-12-03 16:06 ` [PATCH v2 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight cy_huang
2020-12-07 16:04 ` Rob Herring
2020-12-07 16:42 ` Rob Herring
2020-12-08 14:57 ` ChiYuan Huang [this message]
2020-12-03 16:06 ` [PATCH v2 3/4] regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulator cy_huang
2020-12-03 16:06 ` [PATCH v2 4/4] mfd: rt4831: Adds DT binding document for Richtek RT4831 MFD core cy_huang
2020-12-07 16:41 ` Rob Herring
2020-12-08 14:56 ` ChiYuan Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CADiBU3-fKrGEUDD90nnLqeUP9wUth6_oOnn4THw2iZC4=yF7Zw@mail.gmail.com' \
--to=u0084500@gmail.com \
--cc=cy_huang@richtek.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).