Re: [PATCH] drm/radeon: Fix ECS A740GM-M DVI-D EDID error flooding problem

[Alex Deucher <alexdeucher@gmail.com>]

On Wed, Jul 20, 2011 at 4:34 AM,  <reimth@googlemail.com> wrote:
> From: Thomas Reim <reimth@gmail.com>
>
>   ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
>   for a DVI connector that is not implemented/existent on the board.
>
>   Fix by applying extented DDC probing for this connector.
>
>   Requires [PATCH] drm/radeon: Fix Asus M2A-VM HDMI EDID error flooding problem
>
>   BugLink: http://bugs.launchpad.net/bugs/810926
>
> Signed-off-by: Thomas Reim <reimth@gmail.com>

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

> ---
>  drivers/gpu/drm/radeon/radeon_connectors.c |    9 +++++++++
>  1 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
> index 2e70be2..82dacc6 100644
> --- a/drivers/gpu/drm/radeon/radeon_connectors.c
> +++ b/drivers/gpu/drm/radeon/radeon_connectors.c
> @@ -449,6 +449,15 @@ static bool radeon_connector_needs_extended_probe(struct radeon_device *dev,
>                    (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
>                        return true;
>        }
> +       /* ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
> +        * for a DVI connector that is not implemented */
> +       if ((dev->pdev->device == 0x796e) &&
> +           (dev->pdev->subsystem_vendor == 0x1019) &&
> +           (dev->pdev->subsystem_device == 0x2615)) {
> +               if ((connector_type == DRM_MODE_CONNECTOR_DVID) &&
> +                   (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
> +                       return true;
> +       }
>
>        /* Default: no EDID header probe required for DDC probing */
>        return false;
> --
> 1.7.1
>
>