From: Fu Wei <fu.wei@linaro.org>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Timur Tabi <timur@codeaurora.org>,
Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>,
Linaro ACPI Mailman List <linaro-acpi@lists.linaro.org>,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
Wei Fu <tekkamanninja@gmail.com>,
G Gregory <graeme.gregory@linaro.org>,
Al Stone <al.stone@linaro.org>,
Hanjun Guo <hanjun.guo@linaro.org>,
Ashwin Chaugule <ashwin.chaugule@linaro.org>,
Arnd Bergmann <arnd@arndb.de>,
Vipul Gandhi <vgandhi@codeaurora.org>,
Wim Van Sebroeck <wim@iguana.be>, Jon Masters <jcm@redhat.com>,
Leo Duran <leo.duran@amd.com>, Jon Corbet <corbet@lwn.net>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
rjw@rjwysocki.net
Subject: Re: [PATCH v4 5/7] Watchdog: introduce ARM SBSA watchdog driver
Date: Thu, 11 Jun 2015 01:54:22 +0800 [thread overview]
Message-ID: <CADyBb7tMLjcco76GVu9O+GiDOrH4t2UirgxzAGb_jr253FV6RA@mail.gmail.com> (raw)
In-Reply-To: <CADyBb7tSkdRc0GHbX_vAdDAeFGVS=CFCdC_jMCm5LYmg9m1Qow@mail.gmail.com>
Hi Guenter,
On 10 June 2015 at 23:38, Fu Wei <fu.wei@linaro.org> wrote:
> Hi Guenter,
>
>
> On 10 June 2015 at 11:41, Fu Wei <fu.wei@linaro.org> wrote:
>> Hi Guenter,
>>
>> On 10 June 2015 at 00:45, Guenter Roeck <linux@roeck-us.net> wrote:
>>> On 06/09/2015 09:29 AM, Timur Tabi wrote:
>>>>
>>>> On 06/09/2015 11:22 AM, Guenter Roeck wrote:
>>>>>
>>>>>
>>>>>
>>>>> but I see your point. Essentially, the specification is broken
>>>>> for all practical purposes, since, as you point out, enabling
>>>>> the watchdog overwrites and explicitly sets WCV. Effectively
>>>>> this means that just using WCV to program the timeout period
>>>>> is not really possible.
>>>>>
>>>>> I am not really sure how to address this. We can either only use WOR,
>>>>> and forget about pretimeout, or we can enforce a minimum pretimeout.
>>>>> In the latter case, we'll have to write WCV after writing WOR.
>>>>
>>>>
>>>> In talking with our hardware engineers, using WCV to program the timeout
>>>> period is not a valid operation. This is why I keep arguing against the
>>>> pre-timeout feature, and I don't agree that servers should always use
>>>> pre-timeout.
>>>>
>>>
>>> Not sure if "not valid" is correct - after all, it is mentioned in the
>>> specification. However, it is at the very least fragile.
>>
>> I think we should focus on SBSA spec, but not a specific chip design,
>> because this is SBSA watchdog, not a driver for an IP core from a
>> specific chip vendor.
>> this operation is mentioned in the spec,
>> and I have tested my driver on Foundation model(from ARM) and a real hardware.
>>
>>>
>>> I tend to agree that we should just forget about pretimeout and
>>> use your original approach, where the timeout value is used
>>> to program WOR. Everything else is really just asking for trouble.
>>
>> I don't mind if we give up pretimeout, The reason I use pretimeout is:
>> this concept matches the function of two stage timeouts.
>>
>> but, If we give up pretimeout, could you give me a suggestion:
>>
>> How to config the two stage timeouts
>> (1)from enabling watchdog to WS0
>> (2)the time from WS1 to WS0
>>
>> If we only have one timeout parameter, How to config the two stage timeouts?
>> Any suggestion ?
>
> I have another thought for this, please allow me to sent anther
> patchset in a day. see if you like it.
I have sent a non-pretimeout version patchset, please let me know if
you like the non-pretimeout version more.
Great thanks for your time. :-)
>
>>
>> If we make the first stage timeout is timeout/2, this violates the
>> definition of timeout.
>> I don't think users expect interrupt, panic or reboot at timeout/2.
>>
>> And WS1 definitely isn't a backup of WS0.
>>
>>>
>>> Guenter
>>>
>>
>>
>>
>> --
>> Best regards,
>>
>> Fu Wei
>> Software Engineer
>> Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch
>> Ph: +86 21 61221326(direct)
>> Ph: +86 186 2020 4684 (mobile)
>> Room 1512, Regus One Corporate Avenue,Level 15,
>> One Corporate Avenue,222 Hubin Road,Huangpu District,
>> Shanghai,China 200021
>
>
>
> --
> Best regards,
>
> Fu Wei
> Software Engineer
> Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch
> Ph: +86 21 61221326(direct)
> Ph: +86 186 2020 4684 (mobile)
> Room 1512, Regus One Corporate Avenue,Level 15,
> One Corporate Avenue,222 Hubin Road,Huangpu District,
> Shanghai,China 200021
--
Best regards,
Fu Wei
Software Engineer
Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch
Ph: +86 21 61221326(direct)
Ph: +86 186 2020 4684 (mobile)
Room 1512, Regus One Corporate Avenue,Level 15,
One Corporate Avenue,222 Hubin Road,Huangpu District,
Shanghai,China 200021
next prev parent reply other threads:[~2015-06-10 17:54 UTC|newest]
Thread overview: 329+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <=fu.wei@linaro.org>
2015-05-15 11:08 ` [PATCH 0/6] Watchdog: introdouce ARM SBSA watchdog driver fu.wei
2015-05-15 11:08 ` [PATCH 1/6] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-05-15 14:06 ` Arnd Bergmann
2015-05-15 14:14 ` Fu Wei
2015-05-16 10:29 ` Fu Wei
2015-05-15 11:08 ` [PATCH 2/6] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-05-15 11:08 ` [PATCH 3/6] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-05-15 14:07 ` [Linaro-acpi] [PATCH 0/6] Watchdog: introdouce ARM SBSA watchdog driver Arnd Bergmann
2015-05-16 10:33 ` Fu Wei
2015-05-15 11:24 ` [PATCH 4/6] Watchdog: introdouce "pretimeout" into framework fu.wei
2015-05-15 11:24 ` [PATCH 5/6] Watchdog: introdouce ARM SBSA watchdog driver fu.wei
2015-05-15 13:57 ` Arnd Bergmann
2015-05-16 12:01 ` Fu Wei
2015-05-16 12:26 ` Timur Tabi
2015-05-15 22:57 ` Guenter Roeck
2015-05-18 17:38 ` Fu Wei
2015-05-15 11:24 ` [PATCH 6/6] ACPI: import watchdog info of GTDT into platform device fu.wei
2015-05-15 13:33 ` [PATCH 4/6] Watchdog: introdouce "pretimeout" into framework Guenter Roeck
2015-05-15 13:49 ` Fu Wei
2015-05-15 13:55 ` Timur Tabi
2015-05-15 17:59 ` Guenter Roeck
2015-05-15 18:01 ` Guenter Roeck
2015-05-18 17:22 ` Fu Wei
2015-05-15 14:04 ` Arnd Bergmann
2015-05-18 17:19 ` Fu Wei
2015-05-18 17:23 ` Guenter Roeck
2015-05-18 17:39 ` Fu Wei
2015-05-18 20:03 ` Arnd Bergmann
2015-05-18 20:14 ` Guenter Roeck
2015-05-19 1:12 ` Fu Wei
2015-05-21 8:32 ` [PATCH v2 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-05-21 8:32 ` [PATCH v2 1/7] clocksource: export "arch_timer_get_rate" for the other drivers fu.wei
2015-05-22 14:02 ` Hanjun Guo
2015-05-22 14:09 ` Timur Tabi
2015-05-22 15:16 ` Guenter Roeck
2015-05-22 16:22 ` Timur Tabi
2015-05-21 8:32 ` [PATCH v2 2/7] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-05-21 8:32 ` [PATCH v2 3/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-05-21 8:45 ` Arnd Bergmann
2015-05-21 8:49 ` Fu Wei
2015-05-21 8:32 ` [PATCH v2 4/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-05-21 20:33 ` Suravee Suthikulpanit
2015-05-21 8:32 ` [PATCH v2 5/7] Watchdog: introduce "pretimeout" into framework fu.wei
2015-05-21 9:04 ` Guenter Roeck
2015-05-21 10:05 ` Fu Wei
2015-05-21 10:17 ` Guenter Roeck
2015-05-21 10:50 ` Fu Wei
2015-05-21 13:28 ` Guenter Roeck
2015-05-21 10:11 ` Guenter Roeck
2015-05-21 15:32 ` Guenter Roeck
2015-05-22 5:17 ` Fu Wei
2015-05-25 3:09 ` Fu Wei
2015-05-22 6:30 ` Timo Kokkonen
2015-05-22 8:23 ` Fu Wei
2015-05-22 8:59 ` Timo Kokkonen
2015-05-22 10:46 ` Fu Wei
2015-05-22 12:14 ` Timo Kokkonen
2015-05-22 13:37 ` Guenter Roeck
2015-05-22 13:23 ` Guenter Roeck
2015-05-22 14:38 ` Fu Wei
2015-05-22 15:05 ` Guenter Roeck
2015-05-24 16:17 ` Fu Wei
2015-05-21 8:32 ` [PATCH v2 6/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-05-21 10:34 ` Guenter Roeck
2015-05-21 11:08 ` Fu Wei
2015-05-21 15:18 ` Guenter Roeck
2015-05-21 15:46 ` Fu Wei
2015-05-21 15:59 ` Guenter Roeck
2015-05-21 16:12 ` Fu Wei
2015-05-21 16:33 ` Timur Tabi
2015-05-22 5:05 ` Fu Wei
2015-05-21 13:09 ` Timur Tabi
2015-05-21 15:28 ` Guenter Roeck
2015-05-25 3:43 ` Fu Wei
2015-05-25 3:46 ` Timur Tabi
2015-05-25 4:11 ` Fu Wei
2015-05-21 15:42 ` Timur Tabi
2015-05-23 16:28 ` Fu Wei
2015-05-23 16:50 ` Fu Wei
2015-05-23 19:40 ` Timur Tabi
2015-05-23 20:01 ` Guenter Roeck
2015-05-23 20:27 ` Timur Tabi
2015-05-23 20:44 ` Guenter Roeck
2015-05-24 10:50 ` Fu Wei
2015-05-24 10:15 ` Fu Wei
2015-05-24 14:15 ` Guenter Roeck
2015-05-24 15:50 ` Fu Wei
2015-05-24 16:23 ` Guenter Roeck
2015-05-24 16:47 ` Fu Wei
2015-05-24 16:58 ` Guenter Roeck
2015-05-24 17:04 ` Fu Wei
2015-05-24 15:02 ` Timur Tabi
2015-05-24 16:04 ` Fu Wei
2015-05-24 16:13 ` Timur Tabi
2015-05-24 16:29 ` Guenter Roeck
2015-05-24 16:33 ` Fu Wei
2015-05-24 16:44 ` Timur Tabi
2015-05-24 16:50 ` Guenter Roeck
2015-05-24 16:52 ` Fu Wei
2015-05-24 17:19 ` Timur Tabi
2015-05-24 17:23 ` Fu Wei
2015-05-24 17:32 ` Guenter Roeck
2015-05-24 17:47 ` Timur Tabi
2015-05-25 2:03 ` Fu Wei
2015-05-25 2:00 ` Fu Wei
2015-05-24 16:29 ` Fu Wei
2015-05-22 14:50 ` Hanjun Guo
2015-05-22 14:55 ` Arnd Bergmann
2015-05-22 15:01 ` Guenter Roeck
2015-05-22 15:18 ` Hanjun Guo
2015-05-22 15:24 ` [Linaro-acpi] " Arnd Bergmann
2015-05-22 16:19 ` Timur Tabi
2015-05-22 20:13 ` Arnd Bergmann
2015-05-22 20:17 ` Timur Tabi
2015-05-23 7:25 ` Fu Wei
2015-05-22 16:19 ` Timur Tabi
2015-05-23 14:47 ` Fu Wei
2015-05-22 16:18 ` Timur Tabi
2015-05-23 15:08 ` Timur Tabi
2015-05-23 17:26 ` Fu Wei
2015-05-23 18:35 ` Guenter Roeck
2015-05-23 18:37 ` Timur Tabi
2015-05-23 19:03 ` Fu Wei
2015-05-23 19:51 ` Guenter Roeck
2015-05-24 9:58 ` Fu Wei
2015-05-24 14:06 ` Guenter Roeck
2015-05-24 15:06 ` Timur Tabi
2015-05-24 15:37 ` Fu Wei
2015-05-23 18:40 ` Timur Tabi
2015-05-23 19:14 ` Fu Wei
2015-05-23 19:21 ` Timur Tabi
2015-05-21 8:32 ` [PATCH v2 7/7] ACPI: import watchdog info of GTDT into platform device fu.wei
2015-05-22 15:38 ` Hanjun Guo
2015-05-23 19:46 ` Timur Tabi
2015-05-21 8:46 ` [Linaro-acpi] [PATCH v2 0/7] Watchdog: introduce ARM SBSA watchdog driver Arnd Bergmann
2015-05-21 9:01 ` Fu Wei
2015-05-21 20:36 ` Suravee Suthikulpanit
2015-05-22 5:08 ` Fu Wei
2015-05-25 10:03 ` [PATCH v3 0/6] " fu.wei
2015-05-25 10:03 ` [PATCH v3 1/6] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-05-25 10:03 ` [PATCH v3 2/6] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-05-25 10:03 ` [PATCH v3 3/6] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-05-25 10:03 ` [PATCH v3 4/6] Watchdog: introdouce "pretimeout" into framework fu.wei
2015-05-25 19:28 ` Guenter Roeck
2015-05-25 10:03 ` [PATCH v3 5/6] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-05-25 19:39 ` Guenter Roeck
2015-05-29 9:11 ` Fu Wei
2015-05-29 14:54 ` Guenter Roeck
2015-05-29 15:05 ` Fu Wei
2015-05-26 16:50 ` Timur Tabi
2015-05-29 10:17 ` Fu Wei
2015-05-29 13:28 ` Timur Tabi
2015-05-29 14:32 ` Fu Wei
2015-05-29 15:46 ` Timur Tabi
2015-05-29 17:53 ` Fu Wei
2015-05-29 18:27 ` Timur Tabi
2015-05-29 22:10 ` Guenter Roeck
2015-06-01 7:50 ` Fu Wei
2015-05-25 10:03 ` [PATCH v3 6/6] ACPI: import watchdog info of GTDT into platform device fu.wei
2015-05-26 8:28 ` Hanjun Guo
2015-05-26 16:35 ` Timur Tabi
2015-05-26 18:24 ` Guenter Roeck
2015-05-27 3:01 ` Hanjun Guo
2015-05-27 3:08 ` Timur Tabi
2015-05-26 12:28 ` Will Deacon
2015-05-26 15:02 ` Ashwin Chaugule
2015-05-26 15:18 ` Will Deacon
2015-05-26 15:35 ` Ashwin Chaugule
2015-05-26 15:36 ` Guenter Roeck
2015-05-26 16:27 ` Fu Wei
2015-05-27 10:44 ` Will Deacon
2015-05-29 11:13 ` Fu Wei
2015-06-02 4:05 ` [PATCH v4 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-06-02 4:05 ` [PATCH v4 1/7] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-06-02 4:05 ` [PATCH v4 2/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-06-02 4:05 ` [PATCH v4 3/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-06-02 4:05 ` [PATCH v4 4/7] Watchdog: introdouce "pretimeout" into framework fu.wei
2015-06-02 16:12 ` Guenter Roeck
2015-06-08 16:44 ` Fu Wei
2015-06-02 4:05 ` [PATCH v4 5/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-06-02 15:32 ` Timur Tabi
2015-06-02 15:37 ` Guenter Roeck
2015-06-02 16:55 ` Fu Wei
2015-06-02 17:07 ` Guenter Roeck
2015-06-08 16:05 ` Fu Wei
2015-06-08 18:26 ` Guenter Roeck
2015-06-09 3:59 ` Fu Wei
2015-06-09 4:37 ` Guenter Roeck
2015-06-09 6:37 ` Fu Wei
2015-06-09 8:04 ` Guenter Roeck
2015-06-09 10:46 ` Fu Wei
2015-06-09 16:22 ` Guenter Roeck
2015-06-09 16:29 ` Timur Tabi
2015-06-09 16:45 ` Guenter Roeck
2015-06-09 16:53 ` Timur Tabi
2015-06-10 3:41 ` Fu Wei
2015-06-10 4:20 ` Fu Wei
2015-06-10 14:22 ` Timur Tabi
2015-06-10 14:36 ` Fu Wei
2015-06-10 14:41 ` Fu Wei
2015-06-10 15:38 ` Fu Wei
2015-06-10 17:54 ` Fu Wei [this message]
2015-06-11 0:22 ` Timur Tabi
2015-06-11 3:00 ` Fu Wei
2015-06-11 3:45 ` Timur Tabi
2015-06-11 5:13 ` Guenter Roeck
2015-06-11 5:33 ` Fu Wei
2015-06-11 5:32 ` Fu Wei
2015-06-02 17:21 ` Timur Tabi
2015-06-03 18:16 ` Timur Tabi
2015-06-03 18:25 ` Guenter Roeck
2015-06-03 18:53 ` Timur Tabi
2015-06-03 19:29 ` Arnd Bergmann
2015-09-10 22:45 ` Jon Masters
2015-09-14 4:21 ` Pratyush Anand
2015-09-14 15:27 ` Fu Wei
2015-09-14 8:51 ` Catalin Marinas
2015-09-15 3:16 ` Fu Wei
2015-06-08 16:10 ` Fu Wei
2015-06-02 4:05 ` [PATCH v4 6/7] ACPI: add GTDT table parse driver into ACPI driver fu.wei
2015-06-02 4:05 ` [PATCH v4 7/7] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei
2015-06-10 13:41 ` [PATCH v5 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-06-10 13:41 ` [PATCH v5 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-06-10 13:41 ` [PATCH v5 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-06-10 13:41 ` [PATCH v5 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-06-10 13:41 ` [PATCH v5 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei
2015-06-10 16:21 ` Guenter Roeck
2015-06-11 11:22 ` Fu Wei
2015-06-11 16:38 ` Guenter Roeck
2015-06-10 13:41 ` [PATCH v5 5/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-06-10 13:41 ` [PATCH v5 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei
2015-06-10 13:41 ` [PATCH v5 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei
2015-06-10 13:41 ` [PATCH v5 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei
2015-06-10 17:47 ` [PATCH non-pretimeout 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-06-10 17:47 ` [PATCH non-pretimeout 1/7] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-06-10 17:47 ` [PATCH non-pretimeout 2/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-06-10 17:47 ` [PATCH non-pretimeout 3/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-06-12 20:54 ` Timur Tabi
2015-06-14 10:05 ` Fu Wei
2015-06-14 13:17 ` Timur Tabi
2015-06-14 13:57 ` Guenter Roeck
2015-06-15 11:00 ` Fu Wei
2015-06-10 17:47 ` [PATCH non-pretimeout 4/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-06-11 5:33 ` Guenter Roeck
2015-06-11 5:44 ` Fu Wei
2015-06-11 5:49 ` Guenter Roeck
2015-06-11 5:59 ` Fu Wei
2015-06-11 16:28 ` [non-pretimeout,4/7] " Guenter Roeck
2015-06-23 13:26 ` Fu Wei
2015-06-23 15:21 ` Guenter Roeck
2015-06-23 16:17 ` Fu Wei
2015-06-23 16:43 ` Guenter Roeck
2015-06-23 17:01 ` Fu Wei
2015-06-12 3:57 ` [PATCH non-pretimeout 4/7] " Timur Tabi
2015-06-14 10:15 ` Fu Wei
2015-06-10 17:47 ` [PATCH non-pretimeout 5/7] ACPI: add GTDT table parse driver into ACPI driver fu.wei
2015-06-11 11:14 ` Hanjun Guo
2015-06-10 17:47 ` [PATCH non-pretimeout 6/7] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei
2015-06-12 13:16 ` Timur Tabi
2015-06-10 17:47 ` [PATCH non-pretimeout 7/7] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei
2015-06-23 14:16 ` [PATCH v6 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-06-23 14:16 ` [PATCH v6 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-07-14 14:49 ` Rob Herring
2015-07-14 15:48 ` Fu Wei
2015-07-15 12:52 ` Fu Wei
2015-06-23 14:16 ` [PATCH v6 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-06-23 14:16 ` [PATCH v6 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-06-23 14:16 ` [PATCH v6 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei
2015-06-29 16:53 ` [PATCH v6 0/8] Watchdog: introduce ARM SBSA watchdog driver Fu Wei
2015-06-29 19:16 ` Guenter Roeck
2015-06-30 23:47 ` Fu Wei
2015-07-13 9:09 ` Fu Wei
2015-07-13 15:34 ` Guenter Roeck
2015-07-14 0:42 ` Fu Wei
2015-06-23 15:59 ` [PATCH v6 5/8] " fu.wei
2015-06-23 15:59 ` [PATCH v6 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei
2015-07-23 8:32 ` Fu Wei
2015-06-23 15:59 ` [PATCH v6 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei
2015-06-23 15:59 ` [PATCH v6 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei
2015-08-14 12:35 ` [PATCH] acpi, apei, arm64: APEI initial support for aarch64 fu.wei
2015-08-14 12:39 ` Fu Wei
2015-08-14 18:27 ` Zhang, Jonathan Zhixiong
2015-08-15 6:45 ` Fu Wei
2015-08-17 10:01 ` Will Deacon
2015-08-17 23:19 ` Zhang, Jonathan Zhixiong
2015-08-18 8:31 ` Will Deacon
2015-08-18 9:26 ` Fu Wei
2015-08-18 16:44 ` [PATCH v2 0/2] acpi, apei: add BERT support fu.wei
2015-08-18 16:44 ` [PATCH v2 1/2] acpi, apei: add Boot Error Record Table (BERT) support fu.wei
2015-12-16 10:29 ` Borislav Petkov
2016-01-06 18:21 ` Fu Wei
2016-01-06 18:31 ` Borislav Petkov
2015-08-18 16:44 ` [PATCH v2 2/2] acpi, apei, bert: Clear error status at the end of error handling fu.wei
2015-12-16 10:30 ` Borislav Petkov
2015-12-15 16:39 ` [Linaro-acpi] [PATCH v2 0/2] acpi, apei: add BERT support Timur Tabi
2016-01-06 18:24 ` Fu Wei
2015-08-24 17:01 ` [PATCH v7 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-08-24 17:01 ` [PATCH v7 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei
2015-08-24 17:01 ` [PATCH v7 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei
2015-09-15 8:43 ` Dave Young
2015-09-15 9:44 ` Pratyush Anand
2015-09-15 10:23 ` Fu Wei
2015-09-15 10:15 ` Fu Wei
2015-08-24 17:01 ` [PATCH v7 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei
2015-08-24 17:01 ` [PATCH v7 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei
2015-08-24 17:01 ` [PATCH v7 5/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei
2015-09-10 22:29 ` Jon Masters
2015-09-11 2:05 ` Guenter Roeck
2015-09-11 2:50 ` Guenter Roeck
2015-09-14 17:11 ` Fu Wei
2015-09-15 8:38 ` Dave Young
2015-09-15 10:07 ` Fu Wei
2015-09-16 1:57 ` Dave Young
2015-10-13 8:34 ` Fu Wei
2015-08-24 17:01 ` [PATCH v7 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei
2015-08-24 17:01 ` [PATCH v7 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei
2015-08-24 17:01 ` [PATCH v7 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei
2015-08-24 17:50 ` Thomas Gleixner
2015-08-25 17:19 ` Fu Wei
2015-08-25 19:17 ` Thomas Gleixner
2015-08-27 12:02 ` Hanjun Guo
2015-08-27 12:08 ` Thomas Gleixner
2015-08-27 12:28 ` Hanjun Guo
2015-08-27 13:36 ` Hanjun Guo
2015-08-27 13:40 ` Thomas Gleixner
2015-08-27 13:51 ` Fu Wei
2015-09-14 18:05 ` Marc Zyngier
2015-09-30 17:13 ` [PATCH v7 0/8] Watchdog: introduce ARM SBSA watchdog driver Pratyush Anand
2015-09-30 17:22 ` Fu Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CADyBb7tMLjcco76GVu9O+GiDOrH4t2UirgxzAGb_jr253FV6RA@mail.gmail.com \
--to=fu.wei@linaro.org \
--cc=Suravee.Suthikulpanit@amd.com \
--cc=al.stone@linaro.org \
--cc=arnd@arndb.de \
--cc=ashwin.chaugule@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=graeme.gregory@linaro.org \
--cc=hanjun.guo@linaro.org \
--cc=jcm@redhat.com \
--cc=leo.duran@amd.com \
--cc=linaro-acpi@lists.linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=rjw@rjwysocki.net \
--cc=tekkamanninja@gmail.com \
--cc=timur@codeaurora.org \
--cc=vgandhi@codeaurora.org \
--cc=will.deacon@arm.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).