LKML Archive on
 help / color / Atom feed
From: Evan Green <>
To: Sibi Sankar <>
Cc: Bjorn Andersson <>,
	Philipp Zabel <>,
	Ohad Ben Cohen <>,
	linux-arm-msm <>,,
	LKML <>,
	Andy Gross <>
Subject: Re: [PATCH 2/4] remoteproc: qcom: q6v5-mss: Improve readability across clk handling
Date: Tue, 21 Jan 2020 11:22:30 -0800
Message-ID: <> (raw)
In-Reply-To: <>

On Fri, Jan 17, 2020 at 5:51 AM Sibi Sankar <> wrote:
> Define CLKEN and CLKOFF for improving readability of Q6SS clock
> handling.
> Signed-off-by: Sibi Sankar <>

It took me awhile to wrap my head around how this new define,
sometimes replaces SLEEP_CHECK_MAX_LOOPS. I guess they're conceptually
different but set to the same value for now? And you've fixed up a
place where the wrong one was used? If you thought the distinction was
meaningless I'd also be fine merging these two defines into one.
Either way, assuming the above is intentional, this looks ok to me.
Thanks for renaming that define.

Reviewed-by: Evan Green <>

  reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-17 13:51 [PATCH 0/4] Improve general readability of MSS on SC7180 Sibi Sankar
2020-01-17 13:51 ` [PATCH 1/4] remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout Sibi Sankar
2020-01-17 14:19   ` Philipp Zabel
2020-01-20 19:24   ` Bjorn Andersson
2020-01-22  6:18     ` Sibi Sankar
2020-01-17 13:51 ` [PATCH 2/4] remoteproc: qcom: q6v5-mss: Improve readability across clk handling Sibi Sankar
2020-01-21 19:22   ` Evan Green [this message]
2020-01-22  6:38     ` Sibi Sankar
2020-01-17 13:51 ` [PATCH 3/4] remoteproc: qcom: q6v5-mss: Rename boot status timeout Sibi Sankar
2020-01-21 19:22   ` Evan Green
2020-01-17 13:51 ` [PATCH 4/4] remoteproc: qcom: q6v5-mss: Improve readability of reset_assert Sibi Sankar
2020-01-20 19:36   ` Bjorn Andersson
2020-01-20 19:37 ` [PATCH 0/4] Improve general readability of MSS on SC7180 Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='' \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone