linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Furquan Shaikh <furquan@google.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>,
	"Schmauss, Erik" <erik.schmauss@intel.com>,
	Rafael Wysocki <rafael.j.wysocki@intel.com>,
	Len Brown <lenb@kernel.org>,
	ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
	devel@acpica.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Rajat Jain <rajatja@google.com>, Evan Green <evgreen@google.com>,
	Duncan Laurie <dlaurie@google.com>
Subject: Re: [PATCH] drivers/acpi: Clear status of an event before enabling it
Date: Wed, 27 Mar 2019 17:46:21 -0700	[thread overview]
Message-ID: <CAEGmHFHaFk6v=vcciU3QNaQfLriWSJtQ5QUjciY+O8dLh3DhJA@mail.gmail.com> (raw)
In-Reply-To: <CAJZ5v0hxNA_KHjcqSL4XPpQpB1M4UuWJcYOknex=NOGavoooHA@mail.gmail.com>

On Wed, Mar 27, 2019 at 5:24 AM Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Thu, Mar 21, 2019 at 3:16 AM Furquan Shaikh <furquan@google.com> wrote:
> >
> > On Wed, Mar 20, 2019 at 5:11 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
> > >
> > > On Wed, Mar 20, 2019 at 11:34 PM Furquan Shaikh <furquan@google.com> wrote:
> > > >
> > > > Commit 18996f2db918 ("ACPICA: Events: Stop unconditionally
> > > > clearing ACPI IRQs during suspend/resume") was added to stop clearing
> > > > of event status bits unconditionally on suspend and resume paths. This
> > > > was done because of an issue
> > > > reported (https://bugzilla.kernel.org/show_bug.cgi?id=196249) where
> > > > lid status stays closed even on resume (which happens because event
> > > > status bits are cleared unconditionally on resume). Though this change
> > > > fixed the issue on suspend path, it introduced regressions on several
> > > > resume paths.
> > > >
> > > > First regression was reported and fixed on S5 path by the following
> > > > change: commit fa85015c0d95 ("ACPICA: Clear status of all events when
> > > > entering S5"). Next regression was reported and fixed on all legacy
> > > > sleep paths by the commit f317c7dc12b7 ("ACPICA: Clear status of all
> > > > events when entering sleep states"). However, regression still exists
> > > > on S0ix sleep path since it does not follow the legacy sleep path.
> > >
> > > What exactly is failing?
> >
> > Here is the failure scenario:
> >
> > 1. Consider the case of trackpad which acts as a wake source.
> > 2. Since the pad is configured for SCI, GPE_STS gets set for that pad
> > during normal interrupts as well (i.e. during probe at boot or when
> > using the trackpad)
>
> I don't quite understand this.
>
> Is the same GPE used for signaling trackpad events in the system
> working state and for wakeup?

Yes. The same pad is being configured for interrupts (i.e. routed to
APIC) during S0 as well as configured for GPE (i.e. routed for SCI) to
cause wakes when in S0ix/S3. This pad is externally connected to
trackpad interrupt line.

>
> > 3. Now, when the platform decides to enter S0ix, it enables the wake
> > on trackpad by enabling appropriate GPE_EN bit.
> > 4. So, at this point, we are in a situation where GPE_EN as well as
> > GPE_STS are set.
> > 5. Now, if the platform enters S0ix, having GPE_STS set will result in
> > unwanted wakes because of stale events.
> >
> > This is similar to what was fixed on the legacy sleep path:
> > https://lkml.org/lkml/2018/8/12/42. However, as S0ix does not follow
> > the legacy sleep path, clearing of GPE status does not happen. Thus,
> > it is causing failures to go into S0ix on our platforms because of the
> > stale wake events as described above.
> >
> > >
> > > > In case of S0ix, events are enabled as part of device suspend path. If
> > > > status bits for the events are set when they are enabled, it could
> > > > result in premature wake from S0ix. This change ensures that status is
> > > > cleared for any event that is being enabled so that any stale events
> > > > are cleared out.
> > > >
> > > > Signed-off-by: Furquan Shaikh <furquan@google.com>
> > > > ---
> > > >  drivers/acpi/acpica/evgpe.c | 6 +++++-
> > > >  1 file changed, 5 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
> > > > index 62d3aa74277b4..61455ab42fc87 100644
> > > > --- a/drivers/acpi/acpica/evgpe.c
> > > > +++ b/drivers/acpi/acpica/evgpe.c
> > > > @@ -81,8 +81,12 @@ acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
> > > >
> > > >         ACPI_FUNCTION_TRACE(ev_enable_gpe);
> > > >
> > > > -       /* Enable the requested GPE */
> > > > +       /* Clear the GPE (of stale events) */
> > > > +       status = acpi_hw_clear_gpe(gpe_event_info);
> > > > +       if (ACPI_FAILURE(status))
> > > > +               return_ACPI_STATUS(status);
> > >
> > > Well, this may cause events to be missed.
> >
> > Won't those be stale events?
>
> They need not be stale, the device may have already detected some
> activity before the GPE is enabled.
>
> > i.e. any event that has occurred before GPE is enabled should be ignored.
>
> But this is a good point.
>
> >
> > >
> > > >
> > > > +       /* Enable the requested GPE */
> > > >         status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
> > > >         return_ACPI_STATUS(status);
> > > >  }
> > > > --

  reply	other threads:[~2019-03-28  0:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-20 22:28 [PATCH] drivers/acpi: Clear status of an event before enabling it Furquan Shaikh
2019-03-20 22:44 ` Furquan Shaikh
2019-03-20 23:11 ` Rafael J. Wysocki
2019-03-21  2:16   ` Furquan Shaikh
2019-03-27 12:24     ` Rafael J. Wysocki
2019-03-28  0:46       ` Furquan Shaikh [this message]
2019-03-28  8:57         ` Rafael J. Wysocki
2019-03-28 23:48           ` Furquan Shaikh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAEGmHFHaFk6v=vcciU3QNaQfLriWSJtQ5QUjciY+O8dLh3DhJA@mail.gmail.com' \
    --to=furquan@google.com \
    --cc=devel@acpica.org \
    --cc=dlaurie@google.com \
    --cc=erik.schmauss@intel.com \
    --cc=evgreen@google.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=rafael@kernel.org \
    --cc=rajatja@google.com \
    --cc=robert.moore@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).