linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Baluta <daniel.baluta@gmail.com>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: jassisinghbrar@gmail.com,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Aisheng Dong <aisheng.dong@nxp.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [RESEND PATCH v5 4/4] mailbox: imx: add support for imx v1 mu
Date: Tue, 8 Oct 2019 10:25:41 +0300	[thread overview]
Message-ID: <CAEnQRZCkoA-q=C6nU0L_i33W8iTPY2RC4Cvb-aWuExA8VEqM4g@mail.gmail.com> (raw)
In-Reply-To: <CAEnQRZBoLw5pfZ10STGMRfmR7=6hFjYNFOmXiMAnbM+-8Q4uLg@mail.gmail.com>

Hi Richard,

Can you please rebase and resend this patch series?

On Mon, Aug 5, 2019 at 10:21 PM Daniel Baluta <daniel.baluta@gmail.com> wrote:
>
> On Mon, Aug 5, 2019 at 8:16 AM Richard Zhu <hongxing.zhu@nxp.com> wrote:
> >
> > There is a version 1.0 MU on i.MX7ULP platform.
> > One new version ID register is added, and it's offset is 0.
> > TRn registers are defined at the offset 0x20 ~ 0x2C.
> > RRn registers are defined at the offset 0x40 ~ 0x4C.
> > SR/CR registers are defined at 0x60/0x64.
> > Extend this driver to support it.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
> > Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
>
> Very clean solution. Thanks Richard!
>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
>
> > ---
> >  drivers/mailbox/imx-mailbox.c | 55 ++++++++++++++++++++++++++++++-------------
> >  1 file changed, 38 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
> > index afe625e..2cdcdc5 100644
> > --- a/drivers/mailbox/imx-mailbox.c
> > +++ b/drivers/mailbox/imx-mailbox.c
> > @@ -12,19 +12,11 @@
> >  #include <linux/of_device.h>
> >  #include <linux/slab.h>
> >
> > -/* Transmit Register */
> > -#define IMX_MU_xTRn(x)         (0x00 + 4 * (x))
> > -/* Receive Register */
> > -#define IMX_MU_xRRn(x)         (0x10 + 4 * (x))
> > -/* Status Register */
> > -#define IMX_MU_xSR             0x20
> >  #define IMX_MU_xSR_GIPn(x)     BIT(28 + (3 - (x)))
> >  #define IMX_MU_xSR_RFn(x)      BIT(24 + (3 - (x)))
> >  #define IMX_MU_xSR_TEn(x)      BIT(20 + (3 - (x)))
> >  #define IMX_MU_xSR_BRDIP       BIT(9)
> >
> > -/* Control Register */
> > -#define IMX_MU_xCR             0x24
> >  /* General Purpose Interrupt Enable */
> >  #define IMX_MU_xCR_GIEn(x)     BIT(28 + (3 - (x)))
> >  /* Receive Interrupt Enable */
> > @@ -44,6 +36,13 @@ enum imx_mu_chan_type {
> >         IMX_MU_TYPE_RXDB,       /* Rx doorbell */
> >  };
> >
> > +struct imx_mu_dcfg {
> > +       u32     xTR[4];         /* Transmit Registers */
> > +       u32     xRR[4];         /* Receive Registers */
> > +       u32     xSR;            /* Status Register */
> > +       u32     xCR;            /* Control Register */
> > +};
> > +
> >  struct imx_mu_con_priv {
> >         unsigned int            idx;
> >         char                    irq_desc[IMX_MU_CHAN_NAME_SIZE];
> > @@ -61,12 +60,27 @@ struct imx_mu_priv {
> >         struct mbox_chan        mbox_chans[IMX_MU_CHANS];
> >
> >         struct imx_mu_con_priv  con_priv[IMX_MU_CHANS];
> > +       const struct imx_mu_dcfg        *dcfg;
> >         struct clk              *clk;
> >         int                     irq;
> >
> >         bool                    side_b;
> >  };
> >
> > +static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
> > +       .xTR    = {0x0, 0x4, 0x8, 0xc},
> > +       .xRR    = {0x10, 0x14, 0x18, 0x1c},
> > +       .xSR    = 0x20,
> > +       .xCR    = 0x24,
> > +};
> > +
> > +static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
> > +       .xTR    = {0x20, 0x24, 0x28, 0x2c},
> > +       .xRR    = {0x40, 0x44, 0x48, 0x4c},
> > +       .xSR    = 0x60,
> > +       .xCR    = 0x64,
> > +};
> > +
> >  static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller *mbox)
> >  {
> >         return container_of(mbox, struct imx_mu_priv, mbox);
> > @@ -88,10 +102,10 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set, u32 clr)
> >         u32 val;
> >
> >         spin_lock_irqsave(&priv->xcr_lock, flags);
> > -       val = imx_mu_read(priv, IMX_MU_xCR);
> > +       val = imx_mu_read(priv, priv->dcfg->xCR);
> >         val &= ~clr;
> >         val |= set;
> > -       imx_mu_write(priv, val, IMX_MU_xCR);
> > +       imx_mu_write(priv, val, priv->dcfg->xCR);
> >         spin_unlock_irqrestore(&priv->xcr_lock, flags);
> >
> >         return val;
> > @@ -111,8 +125,8 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
> >         struct imx_mu_con_priv *cp = chan->con_priv;
> >         u32 val, ctrl, dat;
> >
> > -       ctrl = imx_mu_read(priv, IMX_MU_xCR);
> > -       val = imx_mu_read(priv, IMX_MU_xSR);
> > +       ctrl = imx_mu_read(priv, priv->dcfg->xCR);
> > +       val = imx_mu_read(priv, priv->dcfg->xSR);
> >
> >         switch (cp->type) {
> >         case IMX_MU_TYPE_TX:
> > @@ -138,10 +152,10 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
> >                 imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
> >                 mbox_chan_txdone(chan, 0);
> >         } else if (val == IMX_MU_xSR_RFn(cp->idx)) {
> > -               dat = imx_mu_read(priv, IMX_MU_xRRn(cp->idx));
> > +               dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
> >                 mbox_chan_received_data(chan, (void *)&dat);
> >         } else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
> > -               imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), IMX_MU_xSR);
> > +               imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), priv->dcfg->xSR);
> >                 mbox_chan_received_data(chan, NULL);
> >         } else {
> >                 dev_warn_ratelimited(priv->dev, "Not handled interrupt\n");
> > @@ -159,7 +173,7 @@ static int imx_mu_send_data(struct mbox_chan *chan, void *data)
> >
> >         switch (cp->type) {
> >         case IMX_MU_TYPE_TX:
> > -               imx_mu_write(priv, *arg, IMX_MU_xTRn(cp->idx));
> > +               imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
> >                 imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
> >                 break;
> >         case IMX_MU_TYPE_TXDB:
> > @@ -270,7 +284,7 @@ static void imx_mu_init_generic(struct imx_mu_priv *priv)
> >                 return;
> >
> >         /* Set default MU configuration */
> > -       imx_mu_write(priv, 0, IMX_MU_xCR);
> > +       imx_mu_write(priv, 0, priv->dcfg->xCR);
> >  }
> >
> >  static int imx_mu_probe(struct platform_device *pdev)
> > @@ -278,6 +292,7 @@ static int imx_mu_probe(struct platform_device *pdev)
> >         struct device *dev = &pdev->dev;
> >         struct device_node *np = dev->of_node;
> >         struct imx_mu_priv *priv;
> > +       const struct imx_mu_dcfg *dcfg;
> >         unsigned int i;
> >         int ret;
> >
> > @@ -295,6 +310,11 @@ static int imx_mu_probe(struct platform_device *pdev)
> >         if (priv->irq < 0)
> >                 return priv->irq;
> >
> > +       dcfg = of_device_get_match_data(dev);
> > +       if (!dcfg)
> > +               return -EINVAL;
> > +       priv->dcfg = dcfg;
> > +
> >         priv->clk = devm_clk_get(dev, NULL);
> >         if (IS_ERR(priv->clk)) {
> >                 if (PTR_ERR(priv->clk) != -ENOENT)
> > @@ -348,7 +368,8 @@ static int imx_mu_remove(struct platform_device *pdev)
> >  }
> >
> >  static const struct of_device_id imx_mu_dt_ids[] = {
> > -       { .compatible = "fsl,imx6sx-mu" },
> > +       { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
> > +       { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
> >         { },
> >  };
> >  MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
> > --
> > 2.7.4
> >

  reply	other threads:[~2019-10-08  7:25 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-05  4:52 [PATCH v5 0/4] mailbox: imx: bug fix and add support for imx v1 mu Richard Zhu
2019-08-05  4:52 ` [RESEND PATCH v5 1/4] mailbox: imx: Fix Tx doorbell shutdown path Richard Zhu
2019-08-05  4:52 ` [RESEND PATCH v5 2/4] mailbox: imx: Clear the right interrupts at shutdown Richard Zhu
2019-08-05  4:52 ` [RESEND PATCH v5 3/4] dt-bindings: mailbox: imx-mu: add imx7ulp MU support Richard Zhu
2019-08-05 19:20   ` Daniel Baluta
2019-08-05  4:52 ` [RESEND PATCH v5 4/4] mailbox: imx: add support for imx v1 mu Richard Zhu
2019-08-05 19:21   ` Daniel Baluta
2019-10-08  7:25     ` Daniel Baluta [this message]
2019-10-09  1:47       ` [EXT] " Richard Zhu
2019-10-12  1:12         ` Richard Zhu
2019-10-12  7:24           ` Daniel Baluta
     [not found]   ` <CAEnQRZDk4TjU0nWgGXEV06ZygvSyuPHc61_uT7KRu0j2Aaxj7w@mail.gmail.com>
2019-10-29 21:02     ` Jassi Brar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAEnQRZCkoA-q=C6nU0L_i33W8iTPY2RC4Cvb-aWuExA8VEqM4g@mail.gmail.com' \
    --to=daniel.baluta@gmail.com \
    --cc=aisheng.dong@nxp.com \
    --cc=daniel.baluta@nxp.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).