Re: [PATCH 1/2] Input: rotary_encoder - Support key events

[nazgul33 <nazgul33@gmail.com>]

input_sync() is there, at the end of the function.

static void rotary_encoder_report_event(struct rotary_encoder *encoder)
{
    if (encoder->relative_axis) {
        input_report_rel(encoder->input,
            encoder->axis, encoder->dir);
    } else if (encoder->relative_keys) {
        u32 keycode = encoder->keycodes[encoder->dir > 0];
        input_event(encoder->input, EV_KEY, keycode, 1);
        input_event(encoder->input, EV_KEY, keycode, 0);
    } else {
        unsigned int pos = encoder->pos;

        if (encoder->dir < 0) {
            /* turning counter-clockwise */
            if (encoder->rollover)
            pos += encoder->steps;
            if (pos)
                pos--;
            } else {
               /* turning clockwise */
               if (encoder->rollover || pos < encoder->steps)
                      pos++;
           }

           if (encoder->rollover)
               pos %= encoder->steps;

           encoder->pos = pos;
           input_report_abs(encoder->input, encoder->axis, encoder->pos);
        }

        input_sync(encoder->input);
}

On Sun, Jan 6, 2019 at 8:12 AM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
>
> On Sat, Jan 5, 2019 at 2:27 PM Donghoon Han <nazgul33@gmail.com> wrote:
> >
> > From: Steven Han <nazgul33@gmail.com>
> >
> > Support generating EV_KEY pair, instead of EV_REL.
> >
> > Signed-off-by: Donghoon Han <nazgul33@gmail.com>
> > ---
> >  drivers/input/misc/rotary_encoder.c | 23 +++++++++++++++++++++--
> >  1 file changed, 21 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
> > index 72eee6d55527..180e35884289 100644
> > --- a/drivers/input/misc/rotary_encoder.c
> > +++ b/drivers/input/misc/rotary_encoder.c
> > @@ -41,6 +41,8 @@ struct rotary_encoder {
> >         u32 steps;
> >         u32 axis;
> >         bool relative_axis;
> > +       bool relative_keys;
> > +       u32 keycodes[2];
> >         bool rollover;
> >         enum rotary_encoder_encoding encoding;
> >
> > @@ -79,6 +81,10 @@ static void rotary_encoder_report_event(struct rotary_encoder *encoder)
> >         if (encoder->relative_axis) {
> >                 input_report_rel(encoder->input,
> >                                  encoder->axis, encoder->dir);
> > +       } else if (encoder->relative_keys) {
> > +               u32 keycode = encoder->keycodes[encoder->dir > 0];
> > +               input_event(encoder->input, EV_KEY, keycode, 1);
>
> You need input_sync() here.
>
> > +               input_event(encoder->input, EV_KEY, keycode, 0);
> >         } else {
> >                 unsigned int pos = encoder->pos;
> >
> > @@ -237,6 +243,16 @@ static int rotary_encoder_probe(struct platform_device *pdev)
> >         device_property_read_u32(dev, "linux,axis", &encoder->axis);
> >         encoder->relative_axis =
> >                 device_property_read_bool(dev, "rotary-encoder,relative-axis");
> > +       encoder->relative_keys =
> > +               device_property_read_bool(dev, "rotary-encoder,relative-keys");
> > +       if (encoder->relative_keys) {
> > +               err = device_property_read_u32_array(dev,
> > +                                       "rotary-encoder,relative-keycodes",
> > +                                       encoder->keycodes, 2);
> > +               if (err)
> > +                       dev_err(dev, "unable to get keycodes: %d\n", err);
> > +               return err;
> > +       }
> >
> >         encoder->gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
> >         if (IS_ERR(encoder->gpios)) {
> > @@ -260,9 +276,12 @@ static int rotary_encoder_probe(struct platform_device *pdev)
> >         input->id.bustype = BUS_HOST;
> >         input->dev.parent = dev;
> >
> > -       if (encoder->relative_axis)
> > +       if (encoder->relative_axis) {
> >                 input_set_capability(input, EV_REL, encoder->axis);
> > -       else
> > +       } else if (encoder->relative_keys) {
> > +               input_set_capability(input, EV_KEY, encoder->keycodes[0]);
> > +               input_set_capability(input, EV_KEY, encoder->keycodes[1]);
> > +       } else
> >                 input_set_abs_params(input,
> >                                      encoder->axis, 0, encoder->steps, 0, 1);
> >
> > --
> > 2.17.1
> >
>
> Thanks.
>
> --
> Dmitry



-- 
한동훈 드림.