# iperf3 -c 192.168.1.100 Connecting to host 192.168.1.100, port 5201 [ 5] local 192.168.1.175 port 50082 connected to 192.168.1.100 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 922 KBytes 7.55 Mbits/sec 0 105 KBytes [ 5] 1.00-2.01 sec 1.12 MBytes 9.32 Mbits/sec 0 153 KBytes [ 5] 2.01-3.00 sec 1.18 MBytes 9.95 Mbits/sec 0 206 KBytes [ 5] 3.00-4.18 sec 1.43 MBytes 10.2 Mbits/sec 0 270 KBytes [ 5] 4.18-5.00 sec 1.68 MBytes 17.1 Mbits/sec 0 342 KBytes [ 5] 5.00-6.10 sec 1.93 MBytes 14.6 Mbits/sec 0 426 KBytes [ 5] 6.10-7.00 sec 1.86 MBytes 17.4 Mbits/sec 0 433 KBytes [ 5] 7.00-8.00 sec 2.73 MBytes 22.9 Mbits/sec 0 433 KBytes [ 5] 8.00-9.00 sec 2.80 MBytes 23.5 Mbits/sec 0 433 KBytes [ 5] 9.00-10.00 sec 2.80 MBytes 23.5 Mbits/sec 0 433 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 18.4 MBytes 15.5 Mbits/sec 0 sender [ 5] 0.00-10.22 sec 17.5 MBytes 14.4 Mbits/sec receiver iperf Done. # iperf3 -c 192.168.1.100 -R Connecting to host 192.168.1.100, port 5201 Reverse mode, remote host 192.168.1.100 is sending [ 5] local 192.168.1.175 port 50086 connected to 192.168.1.100 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 584 KBytes 4.76 Mbits/sec [ 5] 1.00-2.04 sec 509 KBytes 4.02 Mbits/sec [ 5] 2.04-3.00 sec 549 KBytes 4.68 Mbits/sec [ 5] 3.00-4.00 sec 962 KBytes 7.88 Mbits/sec [ 5] 4.00-5.00 sec 749 KBytes 6.15 Mbits/sec [ 5] 5.00-6.00 sec 1.29 MBytes 10.8 Mbits/sec [ 5] 6.00-7.00 sec 427 KBytes 3.51 Mbits/sec [ 5] 7.00-8.01 sec 451 KBytes 3.65 Mbits/sec [ 5] 8.01-9.00 sec 601 KBytes 5.00 Mbits/sec [ 5] 9.00-10.00 sec 638 KBytes 5.20 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.27 sec 6.90 MBytes 5.64 Mbits/sec 8 sender [ 5] 0.00-10.00 sec 6.63 MBytes 5.56 Mbits/sec receiver iperf Done. #