Re: [PATCH 4/4] clk: rockchip: add rk3288 cif_out clock

[Jacob Chen <jacobchen110@gmail.com>]

2017-01-13 21:53 GMT+08:00 Heiko Stuebner <heiko@sntech.de>:
> Hi Jacob,
>
> Am Dienstag, 10. Januar 2017, 19:59:20 CET schrieb Jacob Chen:
>> Add the clocks for the cif block of the rk3288
>>
>> Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
>> ---
>>  drivers/clk/rockchip/clk-rk3288.c | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3288.c
>> b/drivers/clk/rockchip/clk-rk3288.c index 8047cea..f071c24 100644
>> --- a/drivers/clk/rockchip/clk-rk3288.c
>> +++ b/drivers/clk/rockchip/clk-rk3288.c
>> @@ -192,6 +192,7 @@ PNAME(mux_uart1_p)        = { "uart1_src", "uart1_frac",
>> "xin24m" }; PNAME(mux_uart2_p)        = { "uart2_src", "uart2_frac", "xin24m" };
>>  PNAME(mux_uart3_p)   = { "uart3_src", "uart3_frac", "xin24m" };
>>  PNAME(mux_uart4_p)   = { "uart4_src", "uart4_frac", "xin24m" };
>> +PNAME(mux_cif_out_p) = { "cif_src", "xin24m" };
>>  PNAME(mux_vip_out_p) = { "vip_src", "xin24m" };
>>  PNAME(mux_mac_p)     = { "mac_pll_src", "ext_gmac" };
>>  PNAME(mux_hsadcout_p)        = { "hsadc_src", "ext_hsadc" };
>> @@ -448,6 +449,12 @@ static struct rockchip_clk_branch rk3288_clk_branches[]
>> __initdata = { RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS,
>>                       RK3288_CLKGATE_CON(3), 15, GFLAGS),
>>
>> +     COMPOSITE_NOGATE(0, "cif_src", mux_pll_src_cpll_gpll_p, 0,
>> +                     RK3288_CLKSEL_CON(26), 8, 1, MFLAGS, 9, 5, DFLAGS),
>> +     COMPOSITE_NODIV(SCLK_CIF_OUT, "sclk_cif_out", mux_cif_out_p, 0,
>> +                     RK3288_CLKSEL_CON(26), 15, 1, MFLAGS,
>> +                     RK3288_CLKGATE_CON(3), 7, GFLAGS),
>> +
>
> we already have vip_src and sclk_vip_out defined, which I guess are the clocks
> you are adding here and according to the TRM I have the names are also correct
> (clock diagram 2).
>
> But the clkid is not set yet, so I'd suggest adding SCLK_VIP_OUT and assigning
> to the existing clocks.
>
> Also, according to the clock diagram, the gate needs to be (and already is)
> part of the vip_src clock and not the sclk_vip_out.
>
>
> Heiko

Right, I didn't find that it have already been defined..