linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vivek Gautam <gautamvivek1987@gmail.com>
To: linux-samsung-soc@vger.kernel.org
Cc: dianders@chromium.org, linux-arm-kernel@lists.infradead.org,
	devicetree-discuss@lists.ozlabs.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	kgene.kim@samsung.com, Grant Likely <grant.likely@secretlab.ca>,
	Vivek Gautam <gautam.vivek@samsung.com>
Subject: Re: [PATCH v3 1/2] ARM: Exynos5250: Enabling ehci-s5p driver
Date: Fri, 21 Dec 2012 13:46:28 +0530	[thread overview]
Message-ID: <CAFp+6iFSZjfVJp23j2dEz0hRap07RMo68GJpsQM7YqOMBCbqsQ@mail.gmail.com> (raw)
In-Reply-To: <CAFp+6iHoS4XJWHNrsyVsQS4bYZs1PUNEGsRr=EqAS7kpm2XGMQ@mail.gmail.com>

Hi all,


On Wed, Dec 19, 2012 at 7:20 PM, Vivek Gautam <gautamvivek1987@gmail.com> wrote:
> CC: Doug Anderson
>
>
> On Sat, Dec 15, 2012 at 12:53 PM, Grant Likely
> <grant.likely@secretlab.ca> wrote:
>> On Thu, 13 Dec 2012 22:06:01 +0530, Vivek Gautam <gautam.vivek@samsung.com> wrote:
>>> Adding EHCI device tree node for Exynos5250 along with
>>> the device base adress and gpio line for vbus.
>>>
>>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
>>> Acked-by: Jingoo Han <jg1.han@samsung.com>
>>> ---
>>>  .../devicetree/bindings/usb/exynos-usb.txt         |   25 ++++++++++++++++++++
>>>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |    4 +++
>>>  arch/arm/boot/dts/exynos5250.dtsi                  |    6 ++++
>>>  arch/arm/mach-exynos/include/mach/map.h            |    1 +
>>>  arch/arm/mach-exynos/mach-exynos5-dt.c             |    2 +
>>>  5 files changed, 38 insertions(+), 0 deletions(-)
>>>  create mode 100644 Documentation/devicetree/bindings/usb/exynos-usb.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
>>> new file mode 100644
>>> index 0000000..e8bbb47
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
>>> @@ -0,0 +1,25 @@
>>> +Samsung Exynos SoC USB controller
>>> +
>>> +The USB devices interface with USB controllers on Exynos SOCs.
>>> +The device node has following properties.
>>> +
>>> +EHCI
>>> +Required properties:
>>> + - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
>>> +   EHCI controller in host mode.
>>> + - reg: physical base address of the controller and length of memory mapped
>>> +   region.
>>> + - interrupts: interrupt number to the cpu.
>>> +
>>> +Optional properties:
>>> + - samsung,vbus-gpio:  if present, specifies the GPIO that
>>> +   needs to be pulled up for the bus to be powered.
>>> +
>>> +Example:
>>> +
>>> +     usb@12110000 {
>>> +             compatible = "samsung,exynos4210-ehci";
>>> +             reg = <0x12110000 0x100>;
>>> +             interrupts = <0 71 0>;
>>> +             samsung,vbus-gpio = <&gpx2 6 1 3 3>;
>>> +     };
>>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> index 711b55f..f990086 100644
>>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> @@ -218,4 +218,8 @@
>>>       i2s_2: i2s@12D70000 {
>>>               status = "disabled";
>>>       };
>>> +
>>> +     usb@12110000 {
>>> +             samsung,vbus-gpio = <&gpx2 6 1 3 3>;
>>> +     };
>>>  };
>>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
>>> index 581e57a..584bb9a 100644
>>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>>> @@ -299,6 +299,12 @@
>>>               rx-dma-channel = <&pdma0 11>; /* preliminary */
>>>       };
>>>
>>> +     usb@12110000 {
>>> +             compatible = "samsung,exynos4210-ehci";
>>> +             reg = <0x12110000 0x100>;
>>> +             interrupts = <0 71 0>;
>>> +     };
>>> +
>>>       amba {
>>>               #address-cells = <1>;
>>>               #size-cells = <1>;
>>> diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
>>> index cbb2852..b2c662f 100644
>>> --- a/arch/arm/mach-exynos/include/mach/map.h
>>> +++ b/arch/arm/mach-exynos/include/mach/map.h
>>> @@ -201,6 +201,7 @@
>>>  #define EXYNOS4_PA_EHCI                      0x12580000
>>>  #define EXYNOS4_PA_OHCI                      0x12590000
>>>  #define EXYNOS4_PA_HSPHY             0x125B0000
>>> +#define EXYNOS5_PA_EHCI                      0x12110000
>>>  #define EXYNOS4_PA_MFC                       0x13400000
>>>
>>>  #define EXYNOS4_PA_UART                      0x13800000
>>> diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
>>> index 462e5ac..b3b9af1 100644
>>> --- a/arch/arm/mach-exynos/mach-exynos5-dt.c
>>> +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
>>> @@ -110,6 +110,8 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
>>>                               "samsung-i2s.1", NULL),
>>>       OF_DEV_AUXDATA("samsung,samsung-i2s", 0x12D70000,
>>>                               "samsung-i2s.2", NULL),
>>> +     OF_DEV_AUXDATA("samsung,exynos4210-ehci", EXYNOS5_PA_EHCI,
>>> +                             "s5p-ehci", NULL),
>>
>> I'm assuming the above change is temporary. What is left to be done to
>> drop the auxdata in theses two patches?
>>
>> Otherwise the patch looks fine.
>>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>

Any more thought about this patch?
Or does this change seems fine?

>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>
>
>
> --
> Thanks & Regards
> Vivek



-- 
Thanks & Regards
Vivek

  reply	other threads:[~2012-12-21  8:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-13 16:36 [PATCH v3 0/2] Enable ehci and ohci devices for exynos5250 Vivek Gautam
2012-12-13 16:36 ` [PATCH v3 1/2] ARM: Exynos5250: Enabling ehci-s5p driver Vivek Gautam
2012-12-15  7:23   ` Grant Likely
2012-12-19 13:50     ` Vivek Gautam
2012-12-21  8:16       ` Vivek Gautam [this message]
2012-12-21 18:13         ` Doug Anderson
2013-02-08 21:41           ` Grant Likely
2012-12-13 16:36 ` [PATCH v3 2/2] ARM: Exynos5250: Enabling ohci-exynos driver Vivek Gautam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAFp+6iFSZjfVJp23j2dEz0hRap07RMo68GJpsQM7YqOMBCbqsQ@mail.gmail.com \
    --to=gautamvivek1987@gmail.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=dianders@chromium.org \
    --cc=gautam.vivek@samsung.com \
    --cc=grant.likely@secretlab.ca \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).