From: Robert Foss <robert.foss@linaro.org>
To: trix@redhat.com
Cc: Todor Tomov <todor.too@gmail.com>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media <linux-media@vger.kernel.org>,
MSM <linux-arm-msm@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] media: camss: vfe: simplify vfe_get_wm_sizes()
Date: Tue, 31 Aug 2021 21:11:32 +0200 [thread overview]
Message-ID: <CAG3jFyu9QoXAsAxXx-YWhBCxk_jHOWKc10rL7o051Ehav+e4Kg@mail.gmail.com> (raw)
In-Reply-To: <20210818194105.1400766-1-trix@redhat.com>
Hey Tom,
Thanks for the patch!
On Wed, 18 Aug 2021 at 21:41, <trix@redhat.com> wrote:
>
> From: Tom Rix <trix@redhat.com>
>
> Static analysis reports this representative problem
> camss-vfe-4-1.c:333: The result of the left shift is undefined because
> the left operand is negative
> reg |= (height - 1) << 4;
> ~~~~~~~~~ ^
>
> The is a false positive. height is set in vfe_get_wm_sizes() which
> has a switch statement without a default.
>
> Reviewing the switch, the cases contain redundant assignments.
> So simplify to assignments.
>
> Signed-off-by: Tom Rix <trix@redhat.com>
> ---
> .../media/platform/qcom/camss/camss-vfe-4-1.c | 20 ++++++-------------
> .../media/platform/qcom/camss/camss-vfe-4-7.c | 10 +++-------
> .../media/platform/qcom/camss/camss-vfe-4-8.c | 9 +++------
> 3 files changed, 12 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> index 7b7c9a0aaab282..42047b11ba529e 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
> @@ -290,22 +290,14 @@ static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
> static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
> u16 *width, u16 *height, u16 *bytesperline)
> {
> - switch (pix->pixelformat) {
> - case V4L2_PIX_FMT_NV12:
> - case V4L2_PIX_FMT_NV21:
> - *width = pix->width;
> - *height = pix->height;
> - *bytesperline = pix->plane_fmt[0].bytesperline;
> + *width = pix->width;
> + *height = pix->height;
> + *bytesperline = pix->plane_fmt[0].bytesperline;
> +
> + if (pix->pixelformat == V4L2_PIX_FMT_NV12 ||
> + pix->pixelformat == V4L2_PIX_FMT_NV21)
> if (plane == 1)
> *height /= 2;
> - break;
> - case V4L2_PIX_FMT_NV16:
> - case V4L2_PIX_FMT_NV61:
> - *width = pix->width;
> - *height = pix->height;
> - *bytesperline = pix->plane_fmt[0].bytesperline;
> - break;
> - }
> }
>
> static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> index 2836b12ec98915..ab2d57bdf5e71c 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
> @@ -370,30 +370,26 @@ static int vfe_word_per_line_by_bytes(u32 bytes_per_line)
> static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
> u16 *width, u16 *height, u16 *bytesperline)
> {
> + *width = pix->width;
> + *height = pix->height;
> +
> switch (pix->pixelformat) {
> case V4L2_PIX_FMT_NV12:
> case V4L2_PIX_FMT_NV21:
> - *width = pix->width;
> - *height = pix->height;
> *bytesperline = pix->plane_fmt[0].bytesperline;
> if (plane == 1)
> *height /= 2;
> break;
> case V4L2_PIX_FMT_NV16:
> case V4L2_PIX_FMT_NV61:
> - *width = pix->width;
> - *height = pix->height;
> *bytesperline = pix->plane_fmt[0].bytesperline;
> break;
> case V4L2_PIX_FMT_YUYV:
> case V4L2_PIX_FMT_YVYU:
> case V4L2_PIX_FMT_VYUY:
> case V4L2_PIX_FMT_UYVY:
> - *width = pix->width;
> - *height = pix->height;
> *bytesperline = pix->plane_fmt[plane].bytesperline;
> break;
> -
> }
> }
>
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> index 19519234f727c1..7e6b62c930ac8a 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> @@ -343,27 +343,24 @@ static int vfe_word_per_line_by_bytes(u32 bytes_per_line)
> static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
> u16 *width, u16 *height, u16 *bytesperline)
> {
> + *width = pix->width;
> + *height = pix->height;
> +
> switch (pix->pixelformat) {
> case V4L2_PIX_FMT_NV12:
> case V4L2_PIX_FMT_NV21:
> - *width = pix->width;
> - *height = pix->height;
> *bytesperline = pix->plane_fmt[0].bytesperline;
> if (plane == 1)
> *height /= 2;
> break;
> case V4L2_PIX_FMT_NV16:
> case V4L2_PIX_FMT_NV61:
> - *width = pix->width;
> - *height = pix->height;
> *bytesperline = pix->plane_fmt[0].bytesperline;
> break;
> case V4L2_PIX_FMT_YUYV:
> case V4L2_PIX_FMT_YVYU:
> case V4L2_PIX_FMT_VYUY:
> case V4L2_PIX_FMT_UYVY:
> - *width = pix->width;
> - *height = pix->height;
> *bytesperline = pix->plane_fmt[plane].bytesperline;
> break;
> }
Reviewed-by: Robert Foss <robert.foss@linaro.org>
prev parent reply other threads:[~2021-08-31 19:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-18 19:41 [PATCH] media: camss: vfe: simplify vfe_get_wm_sizes() trix
2021-08-31 19:11 ` Robert Foss [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAG3jFyu9QoXAsAxXx-YWhBCxk_jHOWKc10rL7o051Ehav+e4Kg@mail.gmail.com \
--to=robert.foss@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=todor.too@gmail.com \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).