LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: "Clément Péron" <peron.clem@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree <devicetree@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay
Date: Mon, 19 Oct 2020 12:08:42 +0800
Message-ID: <CAGb2v65szCZyu+Gm0igGmyRGZRwvTr+0O-QYAMyTk8n_V7Ne-Q@mail.gmail.com> (raw)
In-Reply-To: <CAJiuCce+VHusdYPv7QutYvCcCByz=nRcBotPNL6E=jA4U4=YoA@mail.gmail.com>

On Mon, Oct 19, 2020 at 1:57 AM Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi,
>
> On Sun, 18 Oct 2020 at 19:24, Clément Péron <peron.clem@gmail.com> wrote:
> >
> > Before the commit:
> > net: phy: realtek: fix rtl8211e rx/tx delay config
> bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
>
> With the hash for reference it's better :)
> Clement
>
> >
> > The software overwrite for RX/TX delays of the RTL8211e were not
> > working properly and the Beelink GS1 had both RX/TX delay of RGMII
> > interface set using pull-up on the TXDLY and RXDLY pins.
> >
> > Now that these delays are working properly they overwrite the HW
> > config and set this to 'rgmii' meaning no delay on both RX/TX.
> > This makes the ethernet of this board not working anymore.
> >
> > Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> > in the device-tree to keep the correct configuration.
> >
> > Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> > Signed-off-by: Clément Péron <peron.clem@gmail.com>

Acked-by: Chen-Yu Tsai <wens@csie.org>

For reference, the driver fix for dwmac enabling the other RGMII modes

    f1239d8aa84d ("net: stmmac: dwmac-sun8i: Allow all RGMII modes")

was merged in v5.5 and was backported to relevant stable kernels.

> > ---
> >  arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > index a364cb4e5b3f..6ab53860e447 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > @@ -99,7 +99,7 @@ &ehci0 {
> >  &emac {
> >         pinctrl-names = "default";
> >         pinctrl-0 = <&ext_rgmii_pins>;
> > -       phy-mode = "rgmii";
> > +       phy-mode = "rgmii-id";
> >         phy-handle = <&ext_rgmii_phy>;
> >         phy-supply = <&reg_aldo2>;
> >         status = "okay";
> > --
> > 2.25.1
> >

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-18 17:24 Clément Péron
2020-10-18 17:57 ` Clément Péron
2020-10-19  4:08   ` Chen-Yu Tsai [this message]
2020-10-22 15:59 ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAGb2v65szCZyu+Gm0igGmyRGZRwvTr+0O-QYAMyTk8n_V7Ne-Q@mail.gmail.com \
    --to=wens@csie.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=peron.clem@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git