Re: [PATCH 4/6] ARM: dts: sunxi: h3-h5: Add pinmux setting for CSI MCLK on PE1

[Chen-Yu Tsai <wens@csie.org>]

On Mon, Dec 3, 2018 at 5:46 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Fri, Nov 30, 2018 at 1:28 PM Chen-Yu Tsai <wens@csie.org> wrote:
> >
> > Some camera modules have the SoC feeding a master clock to the sensor
> > instead of having a standalone crystal. This clock signal is generated
> > from the clock control unit and output from the CSI MCLK function of
> > pin PE1.
> >
> > Add a pinmux setting for it for camera sensors to reference.
> >
> > Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> > ---
>
> On Fri, Nov 30, 2018 at 1:29 PM Chen-Yu Tsai <wens@csie.org> wrote:
> >
> > The CSI controller found on the H3 (and H5) is a reduced version of the
> > one found on the A31. It only has 1 channel, instead of 4 channels for
> > time-multiplexed BT.656. Since the H3 is a reduced version, it cannot
> > "fallback" to a compatible that implements more features than it
> > supports.
> >
> > Drop the A31 fallback compatible.
> >
> > Fixes: f89120b6f554 ("ARM: dts: sun8i: Add the H3/H5 CSI controller")
> > Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> > ---
>
> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

Not merging this one, as there are no boards in tree that directly use this.

ChenYu