From: Pankaj Dubey <pankaj.dubey@samsung.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
linux-samsung-soc <linux-samsung-soc@vger.kernel.org>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org, s.nawrocki@samsung.com,
lee.jones@linaro.org
Subject: Re: [PATCH v2 2/6] drivers: soc: Add support for Exynos PMU driver
Date: Sat, 8 Nov 2014 22:45:46 +0530 [thread overview]
Message-ID: <CAGcde9HdX_sac3u554nwzk1ZcKLUmo69QG6CGPRkwT7uCNEX4Q@mail.gmail.com> (raw)
In-Reply-To: <1415452601-13078-3-git-send-email-amit.daniel@samsung.com>
Hi Amit,
On 8 November 2014 18:46, Amit Daniel Kachhap <amit.daniel@samsung.com> wrote:
> This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
> to "drivers/soc/samsung". This driver is mainly used for setting misc bits of
> register from PMU IP of Exynos SoC which will be required to configure
> before Suspend/Resume. Currently all these settings are done in
> "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
> support,there is a need of DT based implementation of PMU driver.
>
> This driver uses already existing DT binding information.
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
> arch/arm/mach-exynos/Makefile | 2 +-
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/samsung/Kconfig | 19 +++++++++++++++++++
> drivers/soc/samsung/Makefile | 1 +
> .../pmu.c => drivers/soc/samsung/exynos-pmu.c | 0
> 6 files changed, 23 insertions(+), 1 deletion(-)
> create mode 100644 drivers/soc/samsung/Kconfig
> create mode 100644 drivers/soc/samsung/Makefile
> rename arch/arm/mach-exynos/pmu.c => drivers/soc/samsung/exynos-pmu.c (100%)
>
> diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
> index bcefb54..b91b382 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -9,7 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)
>
> # Core
>
> -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
> +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
>
> obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
> obj-$(CONFIG_PM_SLEEP) += suspend.o
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index 76d6bd4..90f33b9 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -3,5 +3,6 @@ menu "SOC (System On Chip) specific Drivers"
> source "drivers/soc/qcom/Kconfig"
> source "drivers/soc/ti/Kconfig"
> source "drivers/soc/versatile/Kconfig"
> +source "drivers/soc/samsung/Kconfig"
>
> endmenu
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 063113d..44d220d 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -6,3 +6,4 @@ obj-$(CONFIG_ARCH_QCOM) += qcom/
> obj-$(CONFIG_ARCH_TEGRA) += tegra/
> obj-$(CONFIG_SOC_TI) += ti/
> obj-$(CONFIG_PLAT_VERSATILE) += versatile/
> +obj-$(CONFIG_ARCH_EXYNOS) += samsung/
> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
> new file mode 100644
> index 0000000..beb6dfc
> --- /dev/null
> +++ b/drivers/soc/samsung/Kconfig
> @@ -0,0 +1,19 @@
> +#
> +# SAMSUNG SOC drivers
> +#
> +menuconfig SOC_SAMSUNG
> + bool "Samsung SOC drivers support"
> +
> +if SOC_SAMSUNG
> +
> +config MFD_EXYNOS_PMU
MFD_EXYNOS_PMU? I think it should be only EXYNOS_PMU,
as we are moving here in drivers/soc giving reason as it does not fit
into MFD.
> + tristate "Support Exynos Power Management Unit"
I think this config should not be user visible config option, as I remember
same was pointed out by Tomasz some times back.
> + depends on ARM || ARM64
How about only making depends on ARCH_EXYNOS?
> + default y
> + help
> + Exynos SoC have Power Management Unit (PMU) which controls power and
> + operation state of Exynos SoC in two different ways. This driver
> + provides implementation of PMU driver and provides basic functionality
> + required during these operation state.
> +
> +endif #SOC_SAMSUNG
> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
> new file mode 100644
> index 0000000..9d30f61
> --- /dev/null
> +++ b/drivers/soc/samsung/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MFD_EXYNOS_PMU) += exynos-pmu.o
> diff --git a/arch/arm/mach-exynos/pmu.c b/drivers/soc/samsung/exynos-pmu.c
> similarity index 100%
> rename from arch/arm/mach-exynos/pmu.c
> rename to drivers/soc/samsung/exynos-pmu.c
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2014-11-08 17:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-08 13:16 [PATCH v2 0/6] exynos: Move pmu driver to driver/soc folder and add exynos7 support Amit Daniel Kachhap
2014-11-08 13:16 ` [PATCH v2 1/6] ARM: EXYNOS: Move pmu specific header files under "linux/soc/samsung" Amit Daniel Kachhap
2014-11-08 13:16 ` [PATCH v2 2/6] drivers: soc: Add support for Exynos PMU driver Amit Daniel Kachhap
2014-11-08 17:15 ` Pankaj Dubey [this message]
2014-11-10 5:07 ` amit daniel kachhap
2014-11-08 13:16 ` [PATCH v2 3/6] drivers: soc: samsung: Fix a spelling mistake Amit Daniel Kachhap
2014-11-08 15:56 ` Pankaj Dubey
2014-11-10 4:59 ` amit daniel kachhap
2014-11-08 13:16 ` [PATCH v2 4/6] soc: samsung: exynos-pmu: Register exynos-pmu driver as a mfd driver Amit Daniel Kachhap
2014-11-08 13:16 ` [PATCH v2 5/6] driver: soc: exynos-pmu: Add an API to be called after wakeup Amit Daniel Kachhap
2014-11-08 13:16 ` [PATCH v2 6/6] drivers: soc: samsung: Add support for Exynos7 pmu Amit Daniel Kachhap
2014-11-08 17:35 ` Pankaj Dubey
2014-11-10 5:10 ` amit daniel kachhap
2014-11-13 8:56 ` [PATCH v2 0/6] exynos: Move pmu driver to driver/soc folder and add exynos7 support amit daniel kachhap
2014-11-19 8:04 ` Kukjin Kim
2014-11-20 5:59 ` amit daniel kachhap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAGcde9HdX_sac3u554nwzk1ZcKLUmo69QG6CGPRkwT7uCNEX4Q@mail.gmail.com \
--to=pankaj.dubey@samsung.com \
--cc=amit.daniel@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).