LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Miguel Ojeda Sandonis" <miguel.ojeda.sandonis@gmail.com>,
	"Peter Korsgaard" <peter.korsgaard@barco.com>,
	"Peter Rosin" <peda@axentia.se>,
	"Ulf Hansson" <ulf.hansson@linaro.org>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Dominik Brodowski" <linux@dominikbrodowski.net>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"Hartmut Knaack" <knaack.h@gmx.de>,
	"Peter Meerwald-Stadler" <pmeerw@pmeerw.net>,
	"Jiri Slaby" <jslaby@suse.com>, "Willy Tarreau" <w@1wt.eu>,
	"Geert Uytterhoeven" <geert@linux-m68k.org>,
	linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-mmc@vger.kernel.org, netdev@vger.kernel.org,
	linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-serial@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>,
	"Lukas Wunner" <lukas@wunner.de>,
	"Rojhalat Ibrahim" <imr@rtschenk.de>,
	"Russell King" <rmk+kernel@armlinux.org.uk>,
	"Tony Lindgren" <tony@atomide.com>,
	"Yegor Yefremov" <yegorslists@googlemail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Linux Samsung SOC" <linux-samsung-soc@vger.kernel.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>
Subject: Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
Date: Fri, 21 Sep 2018 13:26:25 +0200
Message-ID: <CAGfqbt6chUGTDQ-yjppMydet+LFLAjpVzzRsr4+ho3Nu9y_2UQ@mail.gmail.com> (raw)
In-Reply-To: <CAGfqbt7xJxGbq3oOJp9S0Sg7Z9=T6Dy52MDNWSDdsU==kPt1KQ@mail.gmail.com>

Hi Marek,

2018-09-21 12:51 GMT+02:00, Janusz Krzysztofik <jmkrzyszt@gmail.com>:
> Hi Marek,
>
> 2018-09-21 10:18 GMT+02:00, Marek Szyprowski <m.szyprowski@samsung.com>:
>> Hi Janusz,
>>
>> On 2018-09-20 18:21, Janusz Krzysztofik wrote:
>>> On Thursday, September 20, 2018 5:48:22 PM CEST Janusz Krzysztofik
>>> wrote:
>>>> On Thursday, September 20, 2018 12:11:48 PM CEST Marek Szyprowski
>>>> wrote:
>>>>> On 2018-09-02 14:01, Janusz Krzysztofik wrote:
>>>>>> Certain GPIO descriptor arrays returned by gpio_get_array() may
>>>>>> contain
>>>>>> information on direct mapping of array members to pins of a single
>>>>>> GPIO
>>>>>> chip in hardware order.  In such cases, bitmaps of values can be
>>>>>> passed
>>>>>> directly from/to the chip's .get/set_multiple() callbacks without
>>>>>> wasting time on iterations.
>>>>>>
>>>>>> Add respective code to gpiod_get/set_array_bitmap_complex()
>>>>>> functions.
>>>>>> Pins not applicable for fast path are processed as before, skipping
>>>>>> over the 'fast' ones.
>>>>>>
>>>>>> Cc: Jonathan Corbet <corbet@lwn.net>
>>>>>> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>>>>> I've just noticed that this patch landed in today's linux-next. Sadly
>>>>> it
>>>>> breaks booting of Exynos5250-based Samsung Snow Chromebook (ARM 32bit,
>>>>> device-tree source arch/arm/boot/dts/exynos5250-snow.dts).
>>>>>
>>>>> Booting hangs after detecting MMC cards. Reverting this patch fixes
>>>>> the
>>>>> boot. I will try later to add some debugs and investigate it further
>>>>> what
>>>>> really happens when booting hangs.
>>>> Hi Marek,
>>>>
>>>> Thanks for reporting. Could you please try the following fix?
>>> Hi again,
>>>
>>> I realized the patch was not correct, j, not i, should be updated in
>>> second
>>> hunk. Please try the following one.
>>>
>>> Thanks,
>>> Janusz
>>>
>>> >From a919c504850f6cb40e8e81267a3a37537f7c4fd4 Mon Sep 17 00:00:00 2001
>>> From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>>> Date: Thu, 20 Sep 2018 17:37:21 +0200
>>> Subject: [PATCH] gpiolib: Fix bitmap index not updated
>>> While skipping fast path bits, bitmap index is not updated with next
>>> found zero bit position. Fix it.
>>>
>>> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>>
>> This one also doesn't help. A quick compare of logs with this version and
>> a working system shows, that with your patch (and fix) there are no calls
>> to
>> gpx0-2 pin (which are a part of mmc pwrseq), what causes mmc failure. If
>> you need any more information (what kind of logs will help?), let me
>> know.

One more question. You said before that booting hanged after detecting MMC
cards.  Without the fix, I could imagine it keeps iterating with index not
updated and simply never returns from gpiod_get/set_array_bitmap_complex().
Is the behaviour you observe the same with the fix applied?

Thanks,
Janusz

> There is a debug message on array_info content available at the end of
> gpiod_get_array(), could you please activate it and post the message so
> we can understand better what is going on?
>
> On the other hand, I've had a look your device-tree configuration and
> it looks like that specific setup won't benefit from the fast bitmap path.
> You have pin 2 at position 0 and pin 1 at position 1 of the array.
> Hence, the fast bitmap path covers only pin 1, and pin 2 is processed
> by the old path with apparently buggy code for skipping over fast pins.
>
> As a temporary workaround, you could try to revert the order of pins in
> your dts file (pin 1 at position 0, pin 2 at 1) and the mmc pwrseq code
> should work for you again by taking the original old path, not skipping
> over fast pins.  Results of such check may also help us to better
> understand and resolve the issue.
>
> Thanks,
> Janusz
>
>>
>>> ---
>>>   drivers/gpio/gpiolib.c | 7 ++++---
>>>   1 file changed, 4 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
>>> index a53d17745d21..369bdd358fcc 100644
>>> --- a/drivers/gpio/gpiolib.c
>>> +++ b/drivers/gpio/gpiolib.c
>>> @@ -2880,7 +2880,7 @@ int gpiod_get_array_value_complex(bool raw, bool
>>> can_sleep,
>>>   			__set_bit(hwgpio, mask);
>>>
>>>   			if (array_info)
>>> -				find_next_zero_bit(array_info->get_mask,
>>> +				i = find_next_zero_bit(array_info->get_mask,
>>>   						   array_size, i);
>>>   			else
>>>   				i++;
>>> @@ -2905,7 +2905,8 @@ int gpiod_get_array_value_complex(bool raw, bool
>>> can_sleep,
>>>   			trace_gpio_value(desc_to_gpio(desc), 1, value);
>>>
>>>   			if (array_info)
>>> -				find_next_zero_bit(array_info->get_mask, i, j);
>>> +				j = find_next_zero_bit(array_info->get_mask, i,
>>> +						       j);
>>>   			else
>>>   				j++;
>>>   		}
>>> @@ -3192,7 +3193,7 @@ int gpiod_set_array_value_complex(bool raw, bool
>>> can_sleep,
>>>   			}
>>>
>>>   			if (array_info)
>>> -				find_next_zero_bit(array_info->set_mask,
>>> +				i = find_next_zero_bit(array_info->set_mask,
>>>   						   array_size, i);
>>>   			else
>>>   				i++;
>>
>> Best regards
>> --
>> Marek Szyprowski, PhD
>> Samsung R&D Institute Poland
>>
>>
>

  reply index

Thread overview: 206+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18 23:57 [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 1/8] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-07-19  6:17   ` Boris Brezillon
2018-07-20 17:57     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 2/8] mtd: rawnand: ams-delta: Write protect device during probe Janusz Krzysztofik
2018-07-19  6:22   ` Boris Brezillon
2018-07-20 18:02     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-07-19  6:23   ` Boris Brezillon
2018-07-20 18:12     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 4/8] mtd: rawnand: ams-delta: Optimize pointer resolution on read/write Janusz Krzysztofik
2018-07-19  6:25   ` Boris Brezillon
2018-07-20 18:14     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 5/8] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-07-19  6:28   ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 6/8] gpio: omap: Add get/set_multiple() callbacks Janusz Krzysztofik
2018-07-29 20:29   ` Linus Walleij
2018-08-03  1:52     ` Grygorii Strashko
2018-08-03 16:47   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 7/8] mtd: rawnand: ams-delta: Check sanity of data GPIO resource Janusz Krzysztofik
2018-07-19  6:44   ` Boris Brezillon
2018-07-29 20:36     ` Linus Walleij
2018-07-29 21:16       ` Boris Brezillon
2018-07-29 20:33   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 8/8] mtd: rawnand: ams-delta: Use GPIO callbacks for data I/O Janusz Krzysztofik
2018-07-19  6:47   ` Boris Brezillon
2018-07-20 18:38     ` Janusz Krzysztofik
2018-07-20 19:48       ` Boris Brezillon
2018-07-19  6:15 ` [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors " Boris Brezillon
2018-07-20 17:55   ` Janusz Krzysztofik
2018-07-20 19:25     ` Boris Brezillon
2018-10-03 12:00   ` [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op() Janusz Krzysztofik
2018-10-03 12:30     ` Boris Brezillon
2018-10-03 13:55       ` Janusz Krzysztofik
2018-10-03 14:06         ` Boris Brezillon
2018-10-04 13:52           ` Janusz Krzysztofik
2018-10-04 13:59             ` Boris Brezillon
2018-10-04 14:11               ` Janusz Krzysztofik
2018-10-04 14:22                 ` Boris Brezillon
2018-10-12 20:41     ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Janusz Krzysztofik
2018-10-12 20:41       ` [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op() Janusz Krzysztofik
2018-10-13  6:05         ` Boris Brezillon
2018-10-13  5:55       ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Boris Brezillon
2018-10-15 19:41       ` [PATCH v3 1/3] " Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 2/3] mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/W Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 3/3] mtd: rawnand: ams-delta: Convert the driver to ->exec_op() Janusz Krzysztofik
2018-11-11 20:53         ` [PATCH v3 1/3] mtd: rawnand: Provide helper for polling GPIO R/B pin Miquel Raynal
2018-08-06 22:29 ` [RFC PATCH v2] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 01/12] mtd: rawnand: ams-delta: Assign mtd->dev.parent, not mtd->owner Janusz Krzysztofik
2018-08-06 23:54     ` Marek Vasut
2018-08-07 21:55       ` Janusz Krzysztofik
2018-08-07 16:57     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 02/12] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-10 10:10     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 04/12] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-07 17:00     ` Boris Brezillon
2018-08-10 10:11     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write Janusz Krzysztofik
2018-08-06 23:57     ` Marek Vasut
2018-08-07 17:06     ` Boris Brezillon
2018-08-07 17:11       ` Janusz Krzysztofik
2018-08-10 10:25     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 06/12] ARM: OMAP1: ams-delta: drop obsolete NAND resources Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-08-07 18:57     ` Boris Brezillon
2018-08-08 16:55       ` Janusz Krzysztofik
2018-08-08 17:42         ` Miquel Raynal
2018-08-06 22:29   ` [RFC PATCH v2 08/12] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-07 17:02     ` Boris Brezillon
2018-08-07 17:15       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 09/12] gpiolib: Identify GPIO descriptor arrays with direct mapping Janusz Krzysztofik
2018-08-06 23:29     ` Linus Walleij
2018-08-07 16:50       ` Janusz Krzysztofik
2018-08-07 17:10         ` Boris Brezillon
2018-08-07 17:14     ` Boris Brezillon
2018-08-07 17:19       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 10/12] gpiolib: Introduce bitmap get/set array API extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 11/12] mtd: rawnand: ams-delta: Use GPIO API bitmap extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 12/12] gpiolib: Add fast processing path to bitmap API functions Janusz Krzysztofik
2018-08-06 23:43     ` Linus Walleij
2018-08-07 17:29       ` Janusz Krzysztofik
2018-08-07 17:47         ` Boris Brezillon
2018-08-10 10:55           ` Linus Walleij
2018-08-13 22:34   ` [PATCH v3 0/7] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 1/7] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 2/7] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 4/7] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 5/7] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-16  7:30       ` Boris Brezillon
2018-08-13 22:34     ` [PATCH v3 6/7] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 7/7] mtd: rawnand: ams-delta: use GPIO API for data I/O Janusz Krzysztofik
2018-08-16  7:39       ` Boris Brezillon
2018-08-20 21:39     ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-24 12:57         ` Boris Brezillon
2018-09-05  6:47       ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-09-05 20:53         ` Janusz Krzysztofik
2018-09-07 16:45           ` Tony Lindgren
2018-09-19  8:46             ` Miquel Raynal
2018-09-19 22:52       ` [PATCH v5 " Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-09-23 11:35         ` [PATCH v5 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-08-20 23:43     ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-21  6:49         ` Peter Rosin
2018-08-21  6:52           ` Peter Rosin
2018-08-29 12:03         ` Miguel Ojeda
2018-08-29 18:01           ` Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-29  9:06       ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-08-29 18:16         ` Janusz Krzysztofik
2018-08-29 10:19       ` Ulf Hansson
2018-08-29 20:48       ` [PATH v5 " Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-30  4:30           ` Peter Rosin
2018-08-30  7:40           ` Geert Uytterhoeven
2018-08-30 11:10           ` Miguel Ojeda
2018-08-30 15:35             ` David Laight
2018-09-02 10:19             ` Janusz Krzysztofik
2018-08-31  9:14           ` Linus Walleij
2018-08-29 20:48         ` [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-29 20:49         ` [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-31 22:56         ` [PATH v6 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-31 22:56           ` [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-01  0:23             ` Peter Rosin
2018-09-04 15:28             ` kbuild test robot
2018-09-04 15:28             ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-31 22:56           ` [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-04 15:27             ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-02 12:01           ` [PATCH v7 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-02 13:21               ` Lukas Wunner
2018-09-03  4:31               ` Matthew Wilcox
2018-09-03 14:24                 ` Geert Uytterhoeven
2018-09-03 15:07               ` Geert Uytterhoeven
2018-09-04 15:29               ` kbuild test robot
2018-09-05  6:46               ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-03 14:21               ` Geert Uytterhoeven
2018-09-04 15:23               ` kbuild test robot
2018-09-05  7:11               ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
     [not found]               ` <CGME20180920101151eucas1p221f5a1715b8556bb9d99bf08fe09ce6f@eucas1p2.samsung.com>
2018-09-20 10:11                 ` Marek Szyprowski
2018-09-20 15:48                   ` Janusz Krzysztofik
2018-09-20 16:21                     ` Janusz Krzysztofik
2018-09-21  8:18                       ` Marek Szyprowski
2018-09-21 10:51                         ` Janusz Krzysztofik
2018-09-21 11:26                           ` Janusz Krzysztofik [this message]
2018-09-21 14:14                           ` Marek Szyprowski
2018-09-23 10:43                             ` Janusz Krzysztofik
2018-09-23 23:53                               ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Janusz Krzysztofik
2018-09-23 23:53                                 ` [PATCH 1/2] gpiolib: Fix missing updates of bitmap index Janusz Krzysztofik
2018-09-24  8:11                                   ` Linus Walleij
2018-09-29 12:20                                   ` [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit() Janusz Krzysztofik
2018-10-01  6:46                                     ` Marek Szyprowski
2018-10-01  9:37                                     ` Linus Walleij
2018-09-23 23:53                                 ` [PATCH 2/2] gpiolib: Fix array members of same chip processed separately Janusz Krzysztofik
2018-09-24  8:13                                   ` Linus Walleij
2018-09-24  9:43                                 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Marek Szyprowski
2018-09-24 11:08                                   ` Janusz Krzysztofik
2018-09-24 11:38                                     ` Marek Szyprowski
2018-09-24 14:18                                       ` Janusz Krzysztofik
2018-09-25 19:24                                         ` [PATCH] mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap Janusz Krzysztofik
2018-09-26  7:50                                           ` Linus Walleij
2018-09-26  8:14                                           ` Marek Szyprowski
     [not found]                                           ` <7a4906d9-ffb1-f2af-07e7-d5815dcd0d8c@samsung.com>
2018-09-26  8:27                                             ` Marek Szyprowski
2018-10-12 19:09                                           ` [RFT PATCH] " Janusz Krzysztofik
2018-10-15  8:32                                             ` Marek Szyprowski
2018-10-15 10:29                                             ` Ulf Hansson
2018-10-15 14:27                                             ` Linus Walleij
2018-09-20 18:05                     ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Dan Carpenter
2018-09-20 15:49                   ` Linus Walleij
2018-09-05 21:50             ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-13  9:22               ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-09-19 18:08                 ` Linus Walleij
2018-11-21 11:08     ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-11-23 17:02         ` Tony Lindgren
2018-11-21 11:08       ` [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 14:53         ` Boris Brezillon
2018-11-21 11:08       ` [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources Janusz Krzysztofik
2018-11-21 14:56       ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Boris Brezillon
2018-11-23 17:03         ` Tony Lindgren
2018-12-07  8:04           ` Miquel Raynal
2018-12-07 16:10             ` Tony Lindgren

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAGfqbt6chUGTDQ-yjppMydet+LFLAjpVzzRsr4+ho3Nu9y_2UQ@mail.gmail.com \
    --to=jmkrzyszt@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andrew@lunn.ch \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=f.fainelli@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=imr@rtschenk.de \
    --cc=jic23@kernel.org \
    --cc=jslaby@suse.com \
    --cc=kishon@ti.com \
    --cc=knaack.h@gmx.de \
    --cc=krzk@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux@dominikbrodowski.net \
    --cc=lukas@wunner.de \
    --cc=m.szyprowski@samsung.com \
    --cc=miguel.ojeda.sandonis@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=peter.korsgaard@barco.com \
    --cc=pmeerw@pmeerw.net \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=sebastien.bourdelin@savoirfairelinux.com \
    --cc=tony@atomide.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=ulf.hansson@linaro.org \
    --cc=w@1wt.eu \
    --cc=yegorslists@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git