LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Miguel Ojeda Sandonis" <miguel.ojeda.sandonis@gmail.com>,
	"Peter Korsgaard" <peter.korsgaard@barco.com>,
	"Peter Rosin" <peda@axentia.se>,
	"Ulf Hansson" <ulf.hansson@linaro.org>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Dominik Brodowski" <linux@dominikbrodowski.net>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"Hartmut Knaack" <knaack.h@gmx.de>,
	"Peter Meerwald-Stadler" <pmeerw@pmeerw.net>,
	"Jiri Slaby" <jslaby@suse.com>, "Willy Tarreau" <w@1wt.eu>,
	"Geert Uytterhoeven" <geert@linux-m68k.org>,
	linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-mmc@vger.kernel.org, netdev@vger.kernel.org,
	linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-serial@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>,
	"Lukas Wunner" <lukas@wunner.de>,
	"Rojhalat Ibrahim" <imr@rtschenk.de>,
	"Russell King" <rmk+kernel@armlinux.org.uk>,
	"Tony Lindgren" <tony@atomide.com>,
	"Yegor Yefremov" <yegorslists@googlemail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Linux Samsung SOC" <linux-samsung-soc@vger.kernel.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>
Subject: Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
Date: Fri, 21 Sep 2018 12:51:34 +0200
Message-ID: <CAGfqbt7xJxGbq3oOJp9S0Sg7Z9=T6Dy52MDNWSDdsU==kPt1KQ@mail.gmail.com> (raw)
In-Reply-To: <20180921081806eucas1p182d4646e8510b5f0356214af7edba11e~WXF8Ptw4M0970709707eucas1p1p@eucas1p1.samsung.com>

Hi Marek,

2018-09-21 10:18 GMT+02:00, Marek Szyprowski <m.szyprowski@samsung.com>:
> Hi Janusz,
>
> On 2018-09-20 18:21, Janusz Krzysztofik wrote:
>> On Thursday, September 20, 2018 5:48:22 PM CEST Janusz Krzysztofik wrote:
>>> On Thursday, September 20, 2018 12:11:48 PM CEST Marek Szyprowski wrote:
>>>> On 2018-09-02 14:01, Janusz Krzysztofik wrote:
>>>>> Certain GPIO descriptor arrays returned by gpio_get_array() may
>>>>> contain
>>>>> information on direct mapping of array members to pins of a single
>>>>> GPIO
>>>>> chip in hardware order.  In such cases, bitmaps of values can be
>>>>> passed
>>>>> directly from/to the chip's .get/set_multiple() callbacks without
>>>>> wasting time on iterations.
>>>>>
>>>>> Add respective code to gpiod_get/set_array_bitmap_complex() functions.
>>>>> Pins not applicable for fast path are processed as before, skipping
>>>>> over the 'fast' ones.
>>>>>
>>>>> Cc: Jonathan Corbet <corbet@lwn.net>
>>>>> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>>>> I've just noticed that this patch landed in today's linux-next. Sadly
>>>> it
>>>> breaks booting of Exynos5250-based Samsung Snow Chromebook (ARM 32bit,
>>>> device-tree source arch/arm/boot/dts/exynos5250-snow.dts).
>>>>
>>>> Booting hangs after detecting MMC cards. Reverting this patch fixes the
>>>> boot. I will try later to add some debugs and investigate it further
>>>> what
>>>> really happens when booting hangs.
>>> Hi Marek,
>>>
>>> Thanks for reporting. Could you please try the following fix?
>> Hi again,
>>
>> I realized the patch was not correct, j, not i, should be updated in
>> second
>> hunk. Please try the following one.
>>
>> Thanks,
>> Janusz
>>
>> >From a919c504850f6cb40e8e81267a3a37537f7c4fd4 Mon Sep 17 00:00:00 2001
>> From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>> Date: Thu, 20 Sep 2018 17:37:21 +0200
>> Subject: [PATCH] gpiolib: Fix bitmap index not updated
>> While skipping fast path bits, bitmap index is not updated with next
>> found zero bit position. Fix it.
>>
>> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
>
> This one also doesn't help. A quick compare of logs with this version and
> a working system shows, that with your patch (and fix) there are no calls
> to
> gpx0-2 pin (which are a part of mmc pwrseq), what causes mmc failure. If
> you need any more information (what kind of logs will help?), let me know.

There is a debug message on array_info content available at the end of
gpiod_get_array(), could you please activate it and post the message so
we can understand better what is going on?

On the other hand, I've had a look your device-tree configuration and
it looks like that specific setup won't benefit from the fast bitmap path.
You have pin 2 at position 0 and pin 1 at position 1 of the array.
Hence, the fast bitmap path covers only pin 1, and pin 2 is processed
by the old path with apparently buggy code for skipping over fast pins.

As a temporary workaround, you could try to revert the order of pins in
your dts file (pin 1 at position 0, pin 2 at 1) and the mmc pwrseq code
should work for you again by taking the original old path, not skipping
over fast pins.  Results of such check may also help us to better
understand and resolve the issue.

Thanks,
Janusz

>
>> ---
>>   drivers/gpio/gpiolib.c | 7 ++++---
>>   1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
>> index a53d17745d21..369bdd358fcc 100644
>> --- a/drivers/gpio/gpiolib.c
>> +++ b/drivers/gpio/gpiolib.c
>> @@ -2880,7 +2880,7 @@ int gpiod_get_array_value_complex(bool raw, bool
>> can_sleep,
>>   			__set_bit(hwgpio, mask);
>>
>>   			if (array_info)
>> -				find_next_zero_bit(array_info->get_mask,
>> +				i = find_next_zero_bit(array_info->get_mask,
>>   						   array_size, i);
>>   			else
>>   				i++;
>> @@ -2905,7 +2905,8 @@ int gpiod_get_array_value_complex(bool raw, bool
>> can_sleep,
>>   			trace_gpio_value(desc_to_gpio(desc), 1, value);
>>
>>   			if (array_info)
>> -				find_next_zero_bit(array_info->get_mask, i, j);
>> +				j = find_next_zero_bit(array_info->get_mask, i,
>> +						       j);
>>   			else
>>   				j++;
>>   		}
>> @@ -3192,7 +3193,7 @@ int gpiod_set_array_value_complex(bool raw, bool
>> can_sleep,
>>   			}
>>
>>   			if (array_info)
>> -				find_next_zero_bit(array_info->set_mask,
>> +				i = find_next_zero_bit(array_info->set_mask,
>>   						   array_size, i);
>>   			else
>>   				i++;
>
> Best regards
> --
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
>
>

  reply index

Thread overview: 206+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18 23:57 [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 1/8] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-07-19  6:17   ` Boris Brezillon
2018-07-20 17:57     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 2/8] mtd: rawnand: ams-delta: Write protect device during probe Janusz Krzysztofik
2018-07-19  6:22   ` Boris Brezillon
2018-07-20 18:02     ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-07-19  6:23   ` Boris Brezillon
2018-07-20 18:12     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 4/8] mtd: rawnand: ams-delta: Optimize pointer resolution on read/write Janusz Krzysztofik
2018-07-19  6:25   ` Boris Brezillon
2018-07-20 18:14     ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 5/8] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-07-19  6:28   ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 6/8] gpio: omap: Add get/set_multiple() callbacks Janusz Krzysztofik
2018-07-29 20:29   ` Linus Walleij
2018-08-03  1:52     ` Grygorii Strashko
2018-08-03 16:47   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 7/8] mtd: rawnand: ams-delta: Check sanity of data GPIO resource Janusz Krzysztofik
2018-07-19  6:44   ` Boris Brezillon
2018-07-29 20:36     ` Linus Walleij
2018-07-29 21:16       ` Boris Brezillon
2018-07-29 20:33   ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 8/8] mtd: rawnand: ams-delta: Use GPIO callbacks for data I/O Janusz Krzysztofik
2018-07-19  6:47   ` Boris Brezillon
2018-07-20 18:38     ` Janusz Krzysztofik
2018-07-20 19:48       ` Boris Brezillon
2018-07-19  6:15 ` [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors " Boris Brezillon
2018-07-20 17:55   ` Janusz Krzysztofik
2018-07-20 19:25     ` Boris Brezillon
2018-10-03 12:00   ` [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op() Janusz Krzysztofik
2018-10-03 12:30     ` Boris Brezillon
2018-10-03 13:55       ` Janusz Krzysztofik
2018-10-03 14:06         ` Boris Brezillon
2018-10-04 13:52           ` Janusz Krzysztofik
2018-10-04 13:59             ` Boris Brezillon
2018-10-04 14:11               ` Janusz Krzysztofik
2018-10-04 14:22                 ` Boris Brezillon
2018-10-12 20:41     ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Janusz Krzysztofik
2018-10-12 20:41       ` [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op() Janusz Krzysztofik
2018-10-13  6:05         ` Boris Brezillon
2018-10-13  5:55       ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Boris Brezillon
2018-10-15 19:41       ` [PATCH v3 1/3] " Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 2/3] mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/W Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 3/3] mtd: rawnand: ams-delta: Convert the driver to ->exec_op() Janusz Krzysztofik
2018-11-11 20:53         ` [PATCH v3 1/3] mtd: rawnand: Provide helper for polling GPIO R/B pin Miquel Raynal
2018-08-06 22:29 ` [RFC PATCH v2] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 01/12] mtd: rawnand: ams-delta: Assign mtd->dev.parent, not mtd->owner Janusz Krzysztofik
2018-08-06 23:54     ` Marek Vasut
2018-08-07 21:55       ` Janusz Krzysztofik
2018-08-07 16:57     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 02/12] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-10 10:10     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 04/12] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-07 17:00     ` Boris Brezillon
2018-08-10 10:11     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write Janusz Krzysztofik
2018-08-06 23:57     ` Marek Vasut
2018-08-07 17:06     ` Boris Brezillon
2018-08-07 17:11       ` Janusz Krzysztofik
2018-08-10 10:25     ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 06/12] ARM: OMAP1: ams-delta: drop obsolete NAND resources Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-08-07 18:57     ` Boris Brezillon
2018-08-08 16:55       ` Janusz Krzysztofik
2018-08-08 17:42         ` Miquel Raynal
2018-08-06 22:29   ` [RFC PATCH v2 08/12] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-07 17:02     ` Boris Brezillon
2018-08-07 17:15       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 09/12] gpiolib: Identify GPIO descriptor arrays with direct mapping Janusz Krzysztofik
2018-08-06 23:29     ` Linus Walleij
2018-08-07 16:50       ` Janusz Krzysztofik
2018-08-07 17:10         ` Boris Brezillon
2018-08-07 17:14     ` Boris Brezillon
2018-08-07 17:19       ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 10/12] gpiolib: Introduce bitmap get/set array API extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 11/12] mtd: rawnand: ams-delta: Use GPIO API bitmap extension Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 12/12] gpiolib: Add fast processing path to bitmap API functions Janusz Krzysztofik
2018-08-06 23:43     ` Linus Walleij
2018-08-07 17:29       ` Janusz Krzysztofik
2018-08-07 17:47         ` Boris Brezillon
2018-08-10 10:55           ` Linus Walleij
2018-08-13 22:34   ` [PATCH v3 0/7] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 1/7] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 2/7] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 4/7] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 5/7] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-16  7:30       ` Boris Brezillon
2018-08-13 22:34     ` [PATCH v3 6/7] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 7/7] mtd: rawnand: ams-delta: use GPIO API for data I/O Janusz Krzysztofik
2018-08-16  7:39       ` Boris Brezillon
2018-08-20 21:39     ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-24 12:57         ` Boris Brezillon
2018-09-05  6:47       ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-09-05 20:53         ` Janusz Krzysztofik
2018-09-07 16:45           ` Tony Lindgren
2018-09-19  8:46             ` Miquel Raynal
2018-09-19 22:52       ` [PATCH v5 " Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-09-23 11:35         ` [PATCH v5 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-08-20 23:43     ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-21  6:49         ` Peter Rosin
2018-08-21  6:52           ` Peter Rosin
2018-08-29 12:03         ` Miguel Ojeda
2018-08-29 18:01           ` Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-29  9:06       ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-08-29 18:16         ` Janusz Krzysztofik
2018-08-29 10:19       ` Ulf Hansson
2018-08-29 20:48       ` [PATH v5 " Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-30  4:30           ` Peter Rosin
2018-08-30  7:40           ` Geert Uytterhoeven
2018-08-30 11:10           ` Miguel Ojeda
2018-08-30 15:35             ` David Laight
2018-09-02 10:19             ` Janusz Krzysztofik
2018-08-31  9:14           ` Linus Walleij
2018-08-29 20:48         ` [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-29 20:49         ` [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-31 22:56         ` [PATH v6 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-31 22:56           ` [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-01  0:23             ` Peter Rosin
2018-09-04 15:28             ` kbuild test robot
2018-09-04 15:28             ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-31 22:56           ` [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-04 15:27             ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-02 12:01           ` [PATCH v7 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-02 13:21               ` Lukas Wunner
2018-09-03  4:31               ` Matthew Wilcox
2018-09-03 14:24                 ` Geert Uytterhoeven
2018-09-03 15:07               ` Geert Uytterhoeven
2018-09-04 15:29               ` kbuild test robot
2018-09-05  6:46               ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-03 14:21               ` Geert Uytterhoeven
2018-09-04 15:23               ` kbuild test robot
2018-09-05  7:11               ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
     [not found]               ` <CGME20180920101151eucas1p221f5a1715b8556bb9d99bf08fe09ce6f@eucas1p2.samsung.com>
2018-09-20 10:11                 ` Marek Szyprowski
2018-09-20 15:48                   ` Janusz Krzysztofik
2018-09-20 16:21                     ` Janusz Krzysztofik
2018-09-21  8:18                       ` Marek Szyprowski
2018-09-21 10:51                         ` Janusz Krzysztofik [this message]
2018-09-21 11:26                           ` Janusz Krzysztofik
2018-09-21 14:14                           ` Marek Szyprowski
2018-09-23 10:43                             ` Janusz Krzysztofik
2018-09-23 23:53                               ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Janusz Krzysztofik
2018-09-23 23:53                                 ` [PATCH 1/2] gpiolib: Fix missing updates of bitmap index Janusz Krzysztofik
2018-09-24  8:11                                   ` Linus Walleij
2018-09-29 12:20                                   ` [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit() Janusz Krzysztofik
2018-10-01  6:46                                     ` Marek Szyprowski
2018-10-01  9:37                                     ` Linus Walleij
2018-09-23 23:53                                 ` [PATCH 2/2] gpiolib: Fix array members of same chip processed separately Janusz Krzysztofik
2018-09-24  8:13                                   ` Linus Walleij
2018-09-24  9:43                                 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Marek Szyprowski
2018-09-24 11:08                                   ` Janusz Krzysztofik
2018-09-24 11:38                                     ` Marek Szyprowski
2018-09-24 14:18                                       ` Janusz Krzysztofik
2018-09-25 19:24                                         ` [PATCH] mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap Janusz Krzysztofik
2018-09-26  7:50                                           ` Linus Walleij
2018-09-26  8:14                                           ` Marek Szyprowski
     [not found]                                           ` <7a4906d9-ffb1-f2af-07e7-d5815dcd0d8c@samsung.com>
2018-09-26  8:27                                             ` Marek Szyprowski
2018-10-12 19:09                                           ` [RFT PATCH] " Janusz Krzysztofik
2018-10-15  8:32                                             ` Marek Szyprowski
2018-10-15 10:29                                             ` Ulf Hansson
2018-10-15 14:27                                             ` Linus Walleij
2018-09-20 18:05                     ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Dan Carpenter
2018-09-20 15:49                   ` Linus Walleij
2018-09-05 21:50             ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-13  9:22               ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-09-19 18:08                 ` Linus Walleij
2018-11-21 11:08     ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-11-23 17:02         ` Tony Lindgren
2018-11-21 11:08       ` [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 14:53         ` Boris Brezillon
2018-11-21 11:08       ` [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources Janusz Krzysztofik
2018-11-21 14:56       ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Boris Brezillon
2018-11-23 17:03         ` Tony Lindgren
2018-12-07  8:04           ` Miquel Raynal
2018-12-07 16:10             ` Tony Lindgren

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAGfqbt7xJxGbq3oOJp9S0Sg7Z9=T6Dy52MDNWSDdsU==kPt1KQ@mail.gmail.com' \
    --to=jmkrzyszt@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andrew@lunn.ch \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=f.fainelli@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=imr@rtschenk.de \
    --cc=jic23@kernel.org \
    --cc=jslaby@suse.com \
    --cc=kishon@ti.com \
    --cc=knaack.h@gmx.de \
    --cc=krzk@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux@dominikbrodowski.net \
    --cc=lukas@wunner.de \
    --cc=m.szyprowski@samsung.com \
    --cc=miguel.ojeda.sandonis@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=peter.korsgaard@barco.com \
    --cc=pmeerw@pmeerw.net \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=sebastien.bourdelin@savoirfairelinux.com \
    --cc=tony@atomide.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=ulf.hansson@linaro.org \
    --cc=w@1wt.eu \
    --cc=yegorslists@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git