linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Wang <sean.wang@kernel.org>
To: weiyi.lu@mediatek.com
Cc: drinkcat@chromium.org, Matthias Brugger <matthias.bgg@gmail.com>,
	sboyd@codeaurora.org, robh@kernel.org, jamesjj.liao@mediatek.com,
	srv_heupstream@mediatek.com, linux-kernel@vger.kernel.org,
	fan.chen@mediatek.com, linux-mediatek@lists.infradead.org,
	owen.chen@mediatek.com, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 02/11] clk: mediatek: add new member to mtk_pll_data
Date: Tue, 27 Nov 2018 02:41:29 -0800	[thread overview]
Message-ID: <CAGp9LzpT62GfaX53mrtBCQ_7qG4S1fFjkBkTi-PeCjMp0B7N0Q@mail.gmail.com> (raw)
In-Reply-To: <20181127034254.24721-4-weiyi.lu@mediatek.com>

>
> From: Owen Chen <owen.chen@mediatek.com>
>
> 1. pcwibits: The integer bits of pcw for plls is extend to 8 bits,
>    add a variable to indicate this change and
>    backward-compatible.
> 2. fmin: The pll freqency lower-bound is vary from 1GMhz to
>    1.5Ghz, add a variable to indicate platform-dependent.

The patch title seems much general. It should be more specific to
reflect the content,
such as add configurable parameters pcwibits and fmin to mtk_pll.

Apart from that: Acked-by: Sean Wang <sean.wang@kernel.org>

>
> Signed-off-by: Owen Chen <owen.chen@mediatek.com>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---
>  drivers/clk/mediatek/clk-mtk.h |  2 ++
>  drivers/clk/mediatek/clk-pll.c | 12 +++++++++---
>  2 files changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index f83c2bbb677e..11b5517903d0 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -214,8 +214,10 @@ struct mtk_pll_data {
>         unsigned int flags;
>         const struct clk_ops *ops;
>         u32 rst_bar_mask;
> +       unsigned long fmin;
>         unsigned long fmax;
>         int pcwbits;
> +       int pcwibits;
>         uint32_t pcw_reg;
>         int pcw_shift;
>         const struct mtk_pll_div_table *div_table;
> diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
> index f54e4015b0b1..1db161aced31 100644
> --- a/drivers/clk/mediatek/clk-pll.c
> +++ b/drivers/clk/mediatek/clk-pll.c
> @@ -32,6 +32,8 @@
>  #define AUDPLL_TUNER_EN                BIT(31)
>
>  #define POSTDIV_MASK           0x7
> +
> +/* default 7 bits integer, can be overridden with pcwibits. */
>  #define INTEGER_BITS           7
>
>  /*
> @@ -69,11 +71,13 @@ static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
>  {
>         int pcwbits = pll->data->pcwbits;
>         int pcwfbits;
> +       int ibits;
>         u64 vco;
>         u8 c = 0;
>
>         /* The fractional part of the PLL divider. */
> -       pcwfbits = pcwbits > INTEGER_BITS ? pcwbits - INTEGER_BITS : 0;
> +       ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> +       pcwfbits = pcwbits > ibits ? pcwbits - ibits : 0;
>
>         vco = (u64)fin * pcw;
>
> @@ -138,9 +142,10 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
>  static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
>                 u32 freq, u32 fin)
>  {
> -       unsigned long fmin = 1000 * MHZ;
> +       unsigned long fmin = pll->data->fmin ? pll->data->fmin : (1000 * MHZ);
>         const struct mtk_pll_div_table *div_table = pll->data->div_table;
>         u64 _pcw;
> +       int ibits;
>         u32 val;
>
>         if (freq > pll->data->fmax)
> @@ -164,7 +169,8 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
>         }
>
>         /* _pcw = freq * postdiv / fin * 2^pcwfbits */
> -       _pcw = ((u64)freq << val) << (pll->data->pcwbits - INTEGER_BITS);
> +       ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> +       _pcw = ((u64)freq << val) << (pll->data->pcwbits - ibits);
>         do_div(_pcw, fin);
>
>         *pcw = (u32)_pcw;
> --
> 2.18.0
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

  reply	other threads:[~2018-11-27 10:41 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-27  3:42 [PATCH v2 00/11] Mediatek MT8183 clock and scpsys support Weiyi Lu
2018-11-27  3:42 ` Weiyi Lu
2018-11-27  3:42 ` [PATCH v2 01/11] clk: mediatek: add new clkmux register API Weiyi Lu
2018-11-27  5:05   ` Nicolas Boichat
2018-11-27 10:13   ` Sean Wang
2018-11-27  3:42 ` [PATCH v2 02/11] clk: mediatek: add new member to mtk_pll_data Weiyi Lu
2018-11-27 10:41   ` Sean Wang [this message]
2018-11-27  3:42 ` [PATCH v2 03/11] clk: mediatek: Disable tuner_en before change PLL rate Weiyi Lu
2018-11-27 20:36   ` Sean Wang
2018-11-27 23:54     ` Nicolas Boichat
2018-11-28  0:58       ` Sean Wang
2018-11-27  3:42 ` [PATCH v2 04/11] soc: mediatek: add new flow for mtcmos power Weiyi Lu
2018-11-27  5:57   ` Nicolas Boichat
2018-11-27  3:42 ` [PATCH v2 05/11] dt-bindings: ARM: Mediatek: Document bindings for MT8183 Weiyi Lu
2018-11-27  3:42 ` [PATCH v2 06/11] clk: mediatek: Add dt-bindings for MT8183 clocks Weiyi Lu
2018-11-27  3:42 ` [PATCH v2 07/11] clk: mediatek: Add flags support for mtk_gate data Weiyi Lu
2018-11-27  3:42 ` [PATCH v2 08/11] clk: mediatek: Add MT8183 clock support Weiyi Lu
2018-11-27 10:42   ` kbuild test robot
2018-11-27 10:42   ` [PATCH] clk: mediatek: fix platform_no_drv_owner.cocci warnings kbuild test robot
2018-11-27  3:42 ` [PATCH v2 09/11] dt-bindings: soc: fix typo of MT8173 power dt-bindings Weiyi Lu
2018-11-27  3:42 ` [PATCH v2 10/11] dt-bindings: soc: Add MT8183 " Weiyi Lu
2018-11-27  3:42 ` [PATCH v2 11/11] soc: mediatek: Add MT8183 scpsys support Weiyi Lu
2018-11-27  6:11   ` Nicolas Boichat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAGp9LzpT62GfaX53mrtBCQ_7qG4S1fFjkBkTi-PeCjMp0B7N0Q@mail.gmail.com \
    --to=sean.wang@kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=fan.chen@mediatek.com \
    --cc=jamesjj.liao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=owen.chen@mediatek.com \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=weiyi.lu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).