linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Moore <paul@paul-moore.com>
To: rgb@redhat.com
Cc: linux-audit@redhat.com, linux-kernel@vger.kernel.org,
	Eric Paris <eparis@parisplace.org>,
	sgrubb@redhat.com, aviro@redhat.com
Subject: Re: [RFC PATCH ghak59 V1 1/6] audit: give a clue what CONFIG_CHANGE op was involved
Date: Thu, 28 Jun 2018 15:41:28 -0400	[thread overview]
Message-ID: <CAHC9VhTxjcmJGEq6XQmRV0Ouk8oOyHO2C8+HVQOy1qxw9yKyXw@mail.gmail.com> (raw)
In-Reply-To: <17f22b579c28c6cd9475a57e792b5d4fb4dde1dc.1529003588.git.rgb@redhat.com>

On Thu, Jun 14, 2018 at 4:23 PM Richard Guy Briggs <rgb@redhat.com> wrote:
> The failure to add an audit rule due to audit locked gives no clue
> what CONFIG_CHANGE operation failed.
> Similarly the set operation is the only other operation that doesn't
> give the "op=" field to indicate the action.
> All other CONFIG_CHANGE records include an op= field to give a clue as
> to what sort of configuration change is being executed.
>
> Since these are the only CONFIG_CHANGE records that that do not have an
> op= field, add them to bring them in line with the rest.

Normally this would be an immediate reject because this patch inserts
a field into an existing record, but the CONFIG_CHANGE record is so
variable (supposedly bad in its own right) that I don't this really
matters.

With that out of the way, I think this patch is fine, but I don't
think it is complete.  At the very least there is another
CONFIG_CHANGE record in audit_watch_log_rule_change() that doesn't
appear to include an "op" field.  If we want to make sure we have an
"op" field in every CONFIG_CHANGE record, let's actually add them all
:)

There appears to be another one in audit_mark_log_rule_change() ...
and one more in audit_receive_msg().  There may be more.

> Old records:
> type=CONFIG_CHANGE msg=audit(1519812997.781:374): pid=610 uid=0 auid=0 ses=1 subj=... audit_enabled=2 res=0
> type=CONFIG_CHANGE msg=audit(2018-06-14 14:55:04.507:47) : audit_enabled=1 old=1 auid=unset ses=unset subj=... res=yes
>
> New records:
> type=CONFIG_CHANGE msg=audit(1520958477.855:100): pid=610 uid=0 auid=0 ses=1 subj=... op=add_rule audit_enabled=2 res=0
>
> type=CONFIG_CHANGE msg=audit(2018-06-14 14:55:04.507:47) : op=set audit_enabled=1 old=1 auid=unset ses=unset subj=... res=yes
>
> See: https://github.com/linux-audit/audit-kernel/issues/59
> Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
> ---
>  kernel/audit.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/kernel/audit.c b/kernel/audit.c
> index e7478cb..ad54339 100644
> --- a/kernel/audit.c
> +++ b/kernel/audit.c
> @@ -403,7 +403,7 @@ static int audit_log_config_change(char *function_name, u32 new, u32 old,
>         ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE);
>         if (unlikely(!ab))
>                 return rc;
> -       audit_log_format(ab, "%s=%u old=%u", function_name, new, old);
> +       audit_log_format(ab, "op=set %s=%u old=%u", function_name, new, old);
>         audit_log_session_info(ab);
>         rc = audit_log_task_context(ab);
>         if (rc)
> @@ -1365,7 +1365,9 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
>                         return -EINVAL;
>                 if (audit_enabled == AUDIT_LOCKED) {
>                         audit_log_common_recv_msg(&ab, AUDIT_CONFIG_CHANGE);
> -                       audit_log_format(ab, " audit_enabled=%d res=0", audit_enabled);
> +                       audit_log_format(ab, " op=%s_rule audit_enabled=%d res=0",
> +                                        msg_type == AUDIT_ADD_RULE ? "add" : "remove",
> +                                        audit_enabled);
>                         audit_log_end(ab);
>                         return -EPERM;
>                 }
> --
> 1.8.3.1

-- 
paul moore
www.paul-moore.com

  reply	other threads:[~2018-06-28 19:41 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-14 20:21 [RFC PATCH ghak59 V1 0/6] audit: config_change normalizations and event record gathering Richard Guy Briggs
2018-06-14 20:21 ` [RFC PATCH ghak59 V1 1/6] audit: give a clue what CONFIG_CHANGE op was involved Richard Guy Briggs
2018-06-28 19:41   ` Paul Moore [this message]
2018-07-13  0:41     ` Richard Guy Briggs
2018-07-18 21:45       ` Paul Moore
2018-07-19 16:08         ` Richard Guy Briggs
2018-07-19 22:47           ` Paul Moore
2018-07-20 13:27             ` Richard Guy Briggs
2018-07-20 14:21               ` Paul Moore
2018-06-14 20:21 ` [RFC PATCH ghak59 V1 2/6] audit: add syscall information to CONFIG_CHANGE records Richard Guy Briggs
2018-06-28 21:47   ` Paul Moore
2018-06-28 22:10     ` Paul Moore
2018-06-14 20:21 ` [RFC PATCH ghak59 V1 3/6] audit: exclude user records from syscall context Richard Guy Briggs
2018-06-28 22:11   ` Paul Moore
2018-07-12 21:46     ` Richard Guy Briggs
2018-07-23 16:40       ` Richard Guy Briggs
2018-07-23 21:00         ` Paul Moore
2018-07-24 13:02           ` Richard Guy Briggs
2018-07-24 20:17             ` Paul Moore
2018-06-14 20:21 ` [RFC PATCH ghak59 V1 4/6] audit: hand taken context to audit_kill_trees for syscall logging Richard Guy Briggs
2018-06-28 22:23   ` Paul Moore
2018-07-13 21:44     ` Richard Guy Briggs
2018-06-14 20:21 ` [RFC PATCH ghak59 V1 5/6] audit: move EOE record after kill_trees for exit/free Richard Guy Briggs
2018-06-28 22:25   ` Paul Moore
2018-06-14 20:21 ` [RFC PATCH ghak59 V1 6/6] audit: extend config_change mark/watch/tree rule changes Richard Guy Briggs
2018-06-28 22:28   ` Paul Moore
2018-06-29 12:31     ` Steve Grubb

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHC9VhTxjcmJGEq6XQmRV0Ouk8oOyHO2C8+HVQOy1qxw9yKyXw@mail.gmail.com \
    --to=paul@paul-moore.com \
    --cc=aviro@redhat.com \
    --cc=eparis@parisplace.org \
    --cc=linux-audit@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rgb@redhat.com \
    --cc=sgrubb@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).