Re: [PATCH V4 0/9] arm64: imx8mn: Enable more imx8m Nano functions

[Adam Ford <aford173@gmail.com>]

On Sun, Nov 28, 2021 at 7:19 AM Adam Ford <aford173@gmail.com> wrote:
>
> The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very
> different in others.  With the blk-ctrl driver for Mini in place,
> this series expands the blk-ctrl driver to support the Nano which
> opens the door for additional functions in the future.  As part of
> this series, it also addresses some issues in the GPCv2 driver and
> finally adds support for enabling USB and GPU.
>
> V4:  Rebase on top of [1] which fixes hangs caused from CSI and DSI reset
>      and add the same fixes for CSI and DSI to the Nano
> V3:  Fixes an the yaml example
> V2:  Fixes the clock count in the blk-ctrl
>
> [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html
>

Shawn,

This series should apply cleanly against your tree now that [1] has
been applied to your tree.  Should I submit this a resend or are you
able to test the build now?

adam
> Adam Ford (9):
>   soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
>   soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
>   dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
>   dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
>   soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
>   arm64: dts: imx8mn: add GPC node
>   arm64: dts: imx8mn: put USB controller into power-domains
>   arm64: dts: imx8mn: add DISP blk-ctrl
>   arm64: dts: imx8mn: Enable GPU
>
>  .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml     |  97 +++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi     | 103 ++++++++++++++++++
>  drivers/soc/imx/gpcv2.c                       |  26 +++++
>  drivers/soc/imx/imx8m-blk-ctrl.c              |  77 ++++++++++++-
>  include/dt-bindings/power/imx8mn-power.h      |   5 +
>  5 files changed, 307 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
>
> --
> 2.32.0
>