linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amit Kucheria <amit.kucheria@linaro.org>
To: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>,
	gregkh@linuxfoundation.org,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Rob Herring <robh+dt@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	khilman@baylibre.com,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Saravana Kannan <skannan@codeaurora.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	seansw@qti.qualcomm.com, davidai@quicinc.com,
	Mark Rutland <mark.rutland@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	LKML <linux-kernel@vger.kernel.org>,
	lakml <linux-arm-kernel@lists.infradead.org>,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v4 5/7] interconnect: qcom: Add msm8916 interconnect provider driver
Date: Fri, 25 May 2018 11:27:41 +0300	[thread overview]
Message-ID: <CAHLCerNnoNowC6CfNc7O9Nbj+xy0GGw0qmadOxzGsy5iSrOtOg@mail.gmail.com> (raw)
In-Reply-To: <20180309210958.16672-6-georgi.djakov@linaro.org>

On Fri, Mar 9, 2018 at 11:09 PM, Georgi Djakov <georgi.djakov@linaro.org> wrote:
> Add driver for the Qualcomm interconnect buses found in msm8916 based
> platforms.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>  drivers/interconnect/Kconfig        |   5 +
>  drivers/interconnect/Makefile       |   1 +
>  drivers/interconnect/qcom/Kconfig   |  11 +
>  drivers/interconnect/qcom/Makefile  |   2 +
>  drivers/interconnect/qcom/msm8916.c | 482 ++++++++++++++++++++++++++++++++++++
>  include/linux/interconnect/qcom.h   | 350 ++++++++++++++++++++++++++
>  6 files changed, 851 insertions(+)
>  create mode 100644 drivers/interconnect/qcom/Kconfig
>  create mode 100644 drivers/interconnect/qcom/msm8916.c
>  create mode 100644 include/linux/interconnect/qcom.h
>
> diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig
> index a261c7d41deb..07a8276fa35a 100644
> --- a/drivers/interconnect/Kconfig
> +++ b/drivers/interconnect/Kconfig
> @@ -8,3 +8,8 @@ menuconfig INTERCONNECT
>
>           If unsure, say no.
>
> +if INTERCONNECT
> +
> +source "drivers/interconnect/qcom/Kconfig"
> +
> +endif
> diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile
> index 5edf0ae80818..5971b811c2d7 100644
> --- a/drivers/interconnect/Makefile
> +++ b/drivers/interconnect/Makefile
> @@ -1 +1,2 @@
>  obj-$(CONFIG_INTERCONNECT)             += core.o
> +obj-$(CONFIG_INTERCONNECT_QCOM)                += qcom/
> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
> new file mode 100644
> index 000000000000..86465dc37bd4
> --- /dev/null
> +++ b/drivers/interconnect/qcom/Kconfig
> @@ -0,0 +1,11 @@
> +config INTERCONNECT_QCOM
> +       bool "Qualcomm Network-on-Chip interconnect drivers"
> +       depends on INTERCONNECT
> +       depends on ARCH_QCOM || COMPILE_TEST
> +       default y
> +
> +config INTERCONNECT_QCOM_MSM8916
> +       tristate "Qualcomm MSM8916 interconnect driver"
> +       depends on INTERCONNECT_QCOM
> +       help
> +         This is a driver for the Qualcomm Network-on-Chip on msm8916-based platforms.
> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
> index 095bdef1ee6e..a0c13a25e8db 100644
> --- a/drivers/interconnect/qcom/Makefile
> +++ b/drivers/interconnect/qcom/Makefile
> @@ -1 +1,3 @@
>  obj-y += smd-rpm.o
> +
> +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += msm8916.o
> diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c
> new file mode 100644
> index 000000000000..d5b54f8261c8
> --- /dev/null
> +++ b/drivers/interconnect/qcom/msm8916.c
> @@ -0,0 +1,482 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Linaro Ltd
> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/interconnect-provider.h>
> +#include <linux/interconnect/qcom.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "smd-rpm.h"
> +
> +#define RPM_MASTER_FIELD_BW    0x00007762
> +#define RPM_BUS_MASTER_REQ      0x73616d62
> +#define RPM_BUS_SLAVE_REQ       0x766c7362
> +
> +#define to_qcom_provider(_provider) \
> +       container_of(_provider, struct qcom_icc_provider, provider)
> +
> +#define DEFINE_QNODE(_name, _id, _port, _buswidth, _ap_owned,          \
> +                       _mas_rpm_id, _slv_rpm_id, _qos_mode,            \
> +                       _numlinks, ...)                                 \
> +               static struct qcom_icc_node _name = {                   \
> +               .id = _id,                                              \
> +               .name = #_name,                                         \
> +               .port = _port,                                          \
> +               .buswidth = _buswidth,                                  \
> +               .qos_mode = _qos_mode,                                  \
> +               .ap_owned = _ap_owned,                                  \
> +               .mas_rpm_id = _mas_rpm_id,                              \
> +               .slv_rpm_id = _slv_rpm_id,                              \
> +               .num_links = _numlinks,                                 \
> +               .links = { __VA_ARGS__ },                               \
> +       }

Move this macro definition just above its use below.

> +enum qcom_qos_mode {
> +       QCOM_QOS_MODE_BYPASS = 0,
> +       QCOM_QOS_MODE_FIXED,
> +       QCOM_QOS_MODE_MAX,
> +};
> +
> +struct qcom_icc_provider {
> +       struct icc_provider     provider;
> +       void __iomem            *base;
> +       struct clk              *bus_clk;
> +       struct clk              *bus_a_clk;
> +};
> +
> +#define MSM8916_MAX_LINKS      8
> +
> +/**
> + * struct qcom_icc_node - Qualcomm specific interconnect nodes
> + * @name: the node name used in debugfs
> + * @links: an array of nodes where we can go next while traversing
> + * @id: a unique node identifier
> + * @num_links: the total number of @links
> + * @port: the offset index into the masters QoS register space
> + * @buswidth: width of the interconnect between a node and the bus

units?

> + * @ap_owned: the AP CPU does the writing to QoS registers
> + * @rpm: reference to the RPM SMD driver
> + * @qos_mode: QoS mode for ap_owned resources
> + * @mas_rpm_id:        RPM id for devices that are bus masters
> + * @slv_rpm_id:        RPM id for devices that are bus slaves
> + * @rate: current bus clock rate in Hz
> + */
> +struct qcom_icc_node {
> +       unsigned char *name;
> +       u16 links[MSM8916_MAX_LINKS];
> +       u16 id;
> +       u16 num_links;
> +       u16 port;
> +       u16 buswidth;
> +       bool ap_owned;
> +       struct qcom_smd_rpm *rpm;
> +       enum qcom_qos_mode qos_mode;
> +       int mas_rpm_id;
> +       int slv_rpm_id;
> +       u64 rate;
> +};
> +
> +struct qcom_icc_desc {
> +       struct qcom_icc_node **nodes;
> +       size_t num_nodes;
> +};
> +
> +DEFINE_QNODE(mas_video, 63, 8, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, 10000, 10002);
> +DEFINE_QNODE(mas_jpeg, 62, 6, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, 10000, 10002);
> +DEFINE_QNODE(mas_vfe, 29, 9, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, 10001, 10002);
> +DEFINE_QNODE(mas_mdp, 22, 7, 16, 1, -1, -1, QCOM_QOS_MODE_BYPASS, 2, 10000, 10002);
> +DEFINE_QNODE(mas_qdss_bam, 53, 11, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10009);
> +DEFINE_QNODE(mas_snoc_cfg, 54, 0, 16, 0, 20, -1, QCOM_QOS_MODE_BYPASS, 1, 10009);
> +DEFINE_QNODE(mas_qdss_etr, 60, 10, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10009);
> +DEFINE_QNODE(mm_int_0, 10000, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10003);
> +DEFINE_QNODE(mm_int_1, 10001, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10003);
> +DEFINE_QNODE(mm_int_2, 10002, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10004);
> +DEFINE_QNODE(mm_int_bimc, 10003, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10008);
> +DEFINE_QNODE(snoc_int_0, 10004, 0, 8, 0, 99, 130, QCOM_QOS_MODE_FIXED, 3, 588, 519, 10027);
> +DEFINE_QNODE(snoc_int_1, 10005, 0, 8, 0, 100, 131, QCOM_QOS_MODE_FIXED, 3, 517, 663, 664);
> +DEFINE_QNODE(snoc_int_bimc, 10006, 0, 8, 0, 101, 132, QCOM_QOS_MODE_FIXED, 1, 10007);
> +DEFINE_QNODE(snoc_bimc_0_mas, 10007, 0, 8, 0, 3, -1, QCOM_QOS_MODE_FIXED, 1, 10025);
> +DEFINE_QNODE(snoc_bimc_1_mas, 10008, 0, 16, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10026);
> +DEFINE_QNODE(qdss_int, 10009, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 2, 10004, 10006);
> +DEFINE_QNODE(bimc_snoc_slv, 10017, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 2, 10004, 10005);
> +DEFINE_QNODE(snoc_pnoc_mas, 10027, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10028);
> +DEFINE_QNODE(pnoc_snoc_slv, 10011, 0, 8, 0, -1, 45, QCOM_QOS_MODE_FIXED, 3, 10004, 10006, 10005);
> +DEFINE_QNODE(slv_srvc_snoc, 587, 0, 8, 0, -1, 29, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_qdss_stm, 588, 0, 4, 0, -1, 30, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_imem, 519, 0, 8, 0, -1, 26, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_apss, 517, 0, 4, 0, -1, 20, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_cats_0, 663, 0, 16, 0, -1, 106, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_cats_1, 664, 0, 8, 0, -1, 107, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(mas_apss, 1, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, 512, 10016, 514);
> +DEFINE_QNODE(mas_tcu0, 104, 5, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, 512, 10016, 514);
> +DEFINE_QNODE(mas_tcu1, 105, 6, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, 512, 10016, 514);
> +DEFINE_QNODE(mas_gfx, 26, 2, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 3, 512, 10016, 514);
> +DEFINE_QNODE(bimc_snoc_mas, 10016, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10017);
> +DEFINE_QNODE(snoc_bimc_0_slv, 10025, 0, 8, 0, -1, 24, QCOM_QOS_MODE_FIXED, 1, 512);
> +DEFINE_QNODE(snoc_bimc_1_slv, 10026, 0, 8, 1, -1, -1, QCOM_QOS_MODE_FIXED, 1, 512);
> +DEFINE_QNODE(slv_ebi_ch0, 512, 0, 8, 0, -1, 0, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_apps_l2, 514, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(snoc_pnoc_slv, 10028, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10012);
> +DEFINE_QNODE(pnoc_int_0, 10012, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 8, 10010, 10018, 10019, 10020, 10021, 10022, 10023, 10024);
> +DEFINE_QNODE(pnoc_int_1, 10013, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10010);
> +DEFINE_QNODE(pnoc_m_0, 10014, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10012);
> +DEFINE_QNODE(pnoc_m_1, 10015, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10010);
> +DEFINE_QNODE(pnoc_s_0, 10018, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, 620, 624, 579, 622, 521);
> +DEFINE_QNODE(pnoc_s_1, 10019, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, 627, 625, 535, 577, 618);
> +DEFINE_QNODE(pnoc_s_2, 10020, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, 533, 630, 629, 641, 632);
> +DEFINE_QNODE(pnoc_s_3, 10021, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 5, 536, 647, 636, 635, 634);
> +DEFINE_QNODE(pnoc_s_4, 10022, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, 596, 589, 590);
> +DEFINE_QNODE(pnoc_s_8, 10023, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, 614, 606, 613);
> +DEFINE_QNODE(pnoc_s_9, 10024, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 3, 609, 522, 598);
> +DEFINE_QNODE(slv_imem_cfg, 627, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_crypto_0_cfg, 625, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_msg_ram, 535, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_pdm, 577, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_prng, 618, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_clk_ctl, 620, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_mss, 521, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_tlmm, 624, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_tcsr, 579, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_security, 622, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_spdm, 533, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_pnoc_cfg, 641, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_pmic_arb, 632, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_bimc_cfg, 629, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_boot_rom, 630, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_mpm, 536, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_qdss_cfg, 635, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_rbcpr_cfg, 636, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_snoc_cfg, 647, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_dehr_cfg, 634, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_venus_cfg, 596, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_display_cfg, 590, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_camera_cfg, 589, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_usb_hs, 614, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_sdcc_1, 606, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_blsp_1, 613, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_sdcc_2, 609, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_gfx_cfg, 598, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(slv_audio, 522, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 0, 0);
> +DEFINE_QNODE(mas_blsp_1, 86, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10015);
> +DEFINE_QNODE(mas_spdm, 36, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10014);
> +DEFINE_QNODE(mas_dehr, 75, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10014);
> +DEFINE_QNODE(mas_audio, 15, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10014);
> +DEFINE_QNODE(mas_usb_hs, 87, 0, 4, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10015);
> +DEFINE_QNODE(mas_pnoc_crypto_0, 55, 0, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10013);
> +DEFINE_QNODE(mas_pnoc_sdcc_1, 78, 7, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10013);
> +DEFINE_QNODE(mas_pnoc_sdcc_2, 81, 8, 8, 0, -1, -1, QCOM_QOS_MODE_FIXED, 1, 10013);
> +DEFINE_QNODE(pnoc_snoc_mas, 10010, 0, 8, 0, 29, -1, QCOM_QOS_MODE_FIXED, 1, 10011);
> +
> +static struct qcom_icc_node *msm8916_snoc_nodes[] = {
> +       &mas_video,
> +       &mas_jpeg,
> +       &mas_vfe,
> +       &mas_mdp,
> +       &mas_qdss_bam,
> +       &mas_snoc_cfg,
> +       &mas_qdss_etr,
> +       &mm_int_0,
> +       &mm_int_1,
> +       &mm_int_2,
> +       &mm_int_bimc,
> +       &snoc_int_0,
> +       &snoc_int_1,
> +       &snoc_int_bimc,
> +       &snoc_bimc_0_mas,
> +       &snoc_bimc_1_mas,
> +       &qdss_int,
> +       &bimc_snoc_slv,
> +       &snoc_pnoc_mas,
> +       &pnoc_snoc_slv,
> +       &slv_srvc_snoc,
> +       &slv_qdss_stm,
> +       &slv_imem,
> +       &slv_apss,
> +       &slv_cats_0,
> +       &slv_cats_1,
> +};
> +
> +static struct qcom_icc_desc msm8916_snoc = {
> +       .nodes = msm8916_snoc_nodes,
> +       .num_nodes = ARRAY_SIZE(msm8916_snoc_nodes),
> +};
> +
> +static struct qcom_icc_node *msm8916_bimc_nodes[] = {
> +       &mas_apss,
> +       &mas_tcu0,
> +       &mas_tcu1,
> +       &mas_gfx,
> +       &bimc_snoc_mas,
> +       &snoc_bimc_0_slv,
> +       &snoc_bimc_1_slv,
> +       &slv_ebi_ch0,
> +       &slv_apps_l2,
> +};
> +
> +static struct qcom_icc_desc msm8916_bimc = {
> +       .nodes = msm8916_bimc_nodes,
> +       .num_nodes = ARRAY_SIZE(msm8916_bimc_nodes),
> +};
> +
> +static struct qcom_icc_node *msm8916_pnoc_nodes[] = {
> +       &snoc_pnoc_slv,
> +       &pnoc_int_0,
> +       &pnoc_int_1,
> +       &pnoc_m_0,
> +       &pnoc_m_1,
> +       &pnoc_s_0,
> +       &pnoc_s_1,
> +       &pnoc_s_2,
> +       &pnoc_s_3,
> +       &pnoc_s_4,
> +       &pnoc_s_8,
> +       &pnoc_s_9,
> +       &slv_imem_cfg,
> +       &slv_crypto_0_cfg,
> +       &slv_msg_ram,
> +       &slv_pdm,
> +       &slv_prng,
> +       &slv_clk_ctl,
> +       &slv_mss,
> +       &slv_tlmm,
> +       &slv_tcsr,
> +       &slv_security,
> +       &slv_spdm,
> +       &slv_pnoc_cfg,
> +       &slv_pmic_arb,
> +       &slv_bimc_cfg,
> +       &slv_boot_rom,
> +       &slv_mpm,
> +       &slv_qdss_cfg,
> +       &slv_rbcpr_cfg,
> +       &slv_snoc_cfg,
> +       &slv_dehr_cfg,
> +       &slv_venus_cfg,
> +       &slv_display_cfg,
> +       &slv_camera_cfg,
> +       &slv_usb_hs,
> +       &slv_sdcc_1,
> +       &slv_blsp_1,
> +       &slv_sdcc_2,
> +       &slv_gfx_cfg,
> +       &slv_audio,
> +       &mas_blsp_1,
> +       &mas_spdm,
> +       &mas_dehr,
> +       &mas_audio,
> +       &mas_usb_hs,
> +       &mas_pnoc_crypto_0,
> +       &mas_pnoc_sdcc_1,
> +       &mas_pnoc_sdcc_2,
> +       &pnoc_snoc_mas,
> +};
> +
> +static struct qcom_icc_desc msm8916_pnoc = {
> +       .nodes = msm8916_pnoc_nodes,
> +       .num_nodes = ARRAY_SIZE(msm8916_pnoc_nodes),
> +};
> +
> +static int qcom_icc_init(struct icc_node *node)
> +{
> +       struct qcom_icc_provider *qp = to_qcom_provider(node->provider);
> +       /* TODO: init qos and priority */
> +

No need to set_rate here before enabling the clock?

> +       clk_prepare_enable(qp->bus_clk);
> +       clk_prepare_enable(qp->bus_a_clk);
> +
> +       return 0;
> +}
> +
> +static int qcom_icc_set(struct icc_node *src, struct icc_node *dst,
> +                       u32 avg, u32 peak)
> +{
> +       struct qcom_icc_provider *qp;
> +       struct qcom_icc_node *qn;
> +       struct icc_node *node;
> +       struct icc_provider *provider;
> +       u64 avg_bw;
> +       u64 peak_bw;
> +       u64 rate = 0;
> +       int ret = 0;
> +
> +       if (!src)
> +               node = dst;
> +       else
> +               node = src;
> +
> +       qn = node->data;
> +       provider = node->provider;
> +       qp = to_qcom_provider(node->provider);
> +
> +       /* convert from kbps to bps */
> +       avg_bw = avg * 1000ULL;
> +       peak_bw = peak * 1000ULL;
> +

Since the core uses kbps and various SoC HW might use bps (or other
units), perhaps consider providing a macro in the core header such as:

#define icc_units_to_bps(bw)  (bw * 1000ULL)

and then move this conversion to the top of the function where you
define the variable

u64 avg_bw = icc_units_to_bps(avg);
u64 peak_bw = icc_units_to_bps(peak);

Since other drivers will end up copying this driver, it might help
prevent silly errors in the drivers and has a side-effect of allowing
the core to change internal units w/o any driver changes down the
line, if needed.

> +       /* set bandwidth */
> +       if (qn->ap_owned) {
> +               /* TODO: set QoS */
> +       } else {
> +               /* send message to the RPM processor */
> +               if (qn->mas_rpm_id != -1) {
> +                       ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> +                                                   RPM_BUS_MASTER_REQ,
> +                                                   qn->mas_rpm_id,
> +                                                   avg_bw);
> +               }
> +
> +               if (qn->slv_rpm_id != -1) {
> +                       ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> +                                                   RPM_BUS_SLAVE_REQ,
> +                                                   qn->slv_rpm_id,
> +                                                   avg_bw);
> +               }
> +       }
> +
> +       rate = max(avg_bw, peak_bw);
> +
> +       do_div(rate, qn->buswidth);
> +
> +       if (qn->rate != rate) {
> +               ret = clk_set_rate(qp->bus_clk, rate);
> +               if (ret) {
> +                       pr_err("set clk rate %lld error %d\n", rate, ret);
> +                       return ret;
> +               }
> +
> +               ret = clk_set_rate(qp->bus_a_clk, rate);
> +               if (ret) {
> +                       pr_err("set clk rate %lld error %d\n", rate, ret);
> +                       return ret;
> +               }
> +
> +               qn->rate = rate;
> +       }
> +
> +       return ret;
> +}
> +
> +static int qnoc_probe(struct platform_device *pdev)
> +{
> +       const struct qcom_icc_desc *desc;
> +       struct qcom_icc_node **qnodes;
> +       struct qcom_icc_provider *qp;
> +       struct resource *res;
> +       struct icc_provider *provider;
> +       size_t num_nodes, i;
> +       int ret;
> +
> +       /* wait for RPM */
> +       if (!qcom_icc_rpm_smd_available())
> +               return -EPROBE_DEFER;
> +
> +       desc = of_device_get_match_data(&pdev->dev);
> +       if (!desc)
> +               return -EINVAL;
> +
> +       qnodes = desc->nodes;
> +       num_nodes = desc->num_nodes;
> +
> +       qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
> +       if (!qp)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       qp->base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(qp->base))
> +               return PTR_ERR(qp->base);
> +
> +       qp->bus_clk = devm_clk_get(&pdev->dev, "bus_clk");
> +       if (IS_ERR(qp->bus_clk))
> +               return PTR_ERR(qp->bus_clk);
> +
> +       qp->bus_a_clk = devm_clk_get(&pdev->dev, "bus_a_clk");
> +       if (IS_ERR(qp->bus_a_clk))
> +               return PTR_ERR(qp->bus_a_clk);
> +
> +       provider = &qp->provider;
> +       provider->dev = &pdev->dev;
> +       provider->set = &qcom_icc_set;
> +       INIT_LIST_HEAD(&provider->nodes);
> +       provider->data = qp;
> +
> +       ret = icc_add_provider(provider);
> +       if (ret) {
> +               dev_err(&pdev->dev, "error adding interconnect provider\n");
> +               return ret;
> +       }
> +
> +       for (i = 0; i < num_nodes; i++) {
> +               struct icc_node *node;
> +               int ret;
> +               size_t j;
> +
> +               node = icc_node_create(qnodes[i]->id);
> +               if (IS_ERR(node)) {
> +                       ret = PTR_ERR(node);
> +                       goto err;
> +               }
> +
> +               node->name = qnodes[i]->name;
> +               node->data = qnodes[i];
> +               icc_node_add(node, provider);
> +
> +               dev_dbg(&pdev->dev, "registered node %p %s %d\n", node,
> +                       qnodes[i]->name, node->id);
> +
> +               /* populate links */
> +               for (j = 0; j < qnodes[i]->num_links; j++)
> +                       if (qnodes[i]->links[j])
> +                               icc_link_create(node, qnodes[i]->links[j]);
> +
> +               ret = qcom_icc_init(node);
> +               if (ret)
> +                       dev_err(&pdev->dev, "%s init error (%d)\n", node->name,
> +                               ret);
> +       }
> +
> +       platform_set_drvdata(pdev, provider);
> +
> +       return ret;
> +err:
> +       icc_del_provider(provider);
> +       return ret;
> +}
> +
> +static int qnoc_remove(struct platform_device *pdev)
> +{
> +       struct icc_provider *provider = platform_get_drvdata(pdev);
> +
> +       icc_del_provider(provider);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id qnoc_of_match[] = {
> +       { .compatible = "qcom,msm8916-pnoc", .data = &msm8916_pnoc },
> +       { .compatible = "qcom,msm8916-snoc", .data = &msm8916_snoc },
> +       { .compatible = "qcom,msm8916-bimc", .data = &msm8916_bimc },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, qnoc_of_match);
> +
> +static struct platform_driver qnoc_driver = {
> +       .probe = qnoc_probe,
> +       .remove = qnoc_remove,
> +       .driver = {
> +               .name = "qnoc-msm8916",
> +               .of_match_table = qnoc_of_match,
> +       },
> +};
> +module_platform_driver(qnoc_driver);
> +MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
> +MODULE_DESCRIPTION("Qualcomm msm8916 NoC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/interconnect/qcom.h b/include/linux/interconnect/qcom.h
> new file mode 100644
> index 000000000000..2cd378d2f575
> --- /dev/null
> +++ b/include/linux/interconnect/qcom.h
> @@ -0,0 +1,350 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Qualcomm interconnect IDs
> + *
> + * Copyright (c) 2018, Linaro Ltd.
> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
> + */
> +
> +#ifndef __QCOM_INTERCONNECT_IDS_H
> +#define __QCOM_INTERCONNECT_IDS_H
> +
> +#define FAB_BIMC 0
> +#define FAB_SYS_NOC 1024
> +#define FAB_MMSS_NOC 2048
> +#define FAB_OCMEM_NOC 3072
> +#define FAB_PERIPH_NOC 4096
> +#define FAB_CONFIG_NOC 5120
> +#define FAB_OCMEM_VNOC 6144
> +
> +#define MASTER_AMPSS_M0 1
> +#define MASTER_AMPSS_M1 2
> +#define APPSS_MASTER_FAB_MMSS 3
> +#define APPSS_MASTER_FAB_SYSTEM 4
> +#define SYSTEM_MASTER_FAB_APPSS 5
> +#define MASTER_SPS 6
> +#define MASTER_ADM_PORT0 7
> +#define MASTER_ADM_PORT1 8
> +#define SYSTEM_MASTER_ADM1_PORT0 9
> +#define MASTER_ADM1_PORT1 10
> +#define MASTER_LPASS_PROC 11
> +#define MASTER_MSS_PROCI 12
> +#define MASTER_MSS_PROCD 13
> +#define MASTER_MSS_MDM_PORT0 14
> +#define MASTER_LPASS 15
> +#define SYSTEM_MASTER_CPSS_FPB 16
> +#define SYSTEM_MASTER_SYSTEM_FPB 17
> +#define SYSTEM_MASTER_MMSS_FPB 18
> +#define MASTER_ADM1_CI 19
> +#define MASTER_ADM0_CI 20
> +#define MASTER_MSS_MDM_PORT1 21
> +#define MASTER_MDP_PORT0 22
> +#define MASTER_MDP_PORT1 23
> +#define MMSS_MASTER_ADM1_PORT0 24
> +#define MASTER_ROTATOR 25
> +#define MASTER_GRAPHICS_3D 26
> +#define MASTER_JPEG_DEC 27
> +#define MASTER_GRAPHICS_2D_CORE0 28
> +#define MASTER_VFE 29
> +#define MASTER_VPE 30
> +#define MASTER_JPEG_ENC 31
> +#define MASTER_GRAPHICS_2D_CORE1 32
> +#define MMSS_MASTER_APPS_FAB 33
> +#define MASTER_HD_CODEC_PORT0 34
> +#define MASTER_HD_CODEC_PORT1 35
> +#define MASTER_SPDM 36
> +#define MASTER_RPM 37
> +#define MASTER_MSS 38
> +#define MASTER_RIVA 39
> +#define SYSTEM_MASTER_UNUSED_6 40
> +#define MASTER_MSS_SW_PROC 41
> +#define MASTER_MSS_FW_PROC 42
> +#define MMSS_MASTER_UNUSED_2 43
> +#define MASTER_GSS_NAV 44
> +#define MASTER_PCIE 45
> +#define MASTER_SATA 46
> +#define MASTER_CRYPTO 47
> +#define MASTER_VIDEO_CAP 48
> +#define MASTER_GRAPHICS_3D_PORT1 49
> +#define MASTER_VIDEO_ENC 50
> +#define MASTER_VIDEO_DEC 51
> +#define MASTER_LPASS_AHB 52
> +#define MASTER_QDSS_BAM 53
> +#define MASTER_SNOC_CFG 54
> +#define MASTER_CRYPTO_CORE0 55
> +#define MASTER_CRYPTO_CORE1 56
> +#define MASTER_MSS_NAV 57
> +#define MASTER_OCMEM_DMA 58
> +#define MASTER_WCSS 59
> +#define MASTER_QDSS_ETR 60
> +#define MASTER_USB3 61
> +#define MASTER_JPEG 62
> +#define MASTER_VIDEO_P0 63
> +#define MASTER_VIDEO_P1 64
> +#define MASTER_MSS_PROC 65
> +#define MASTER_JPEG_OCMEM 66
> +#define MASTER_MDP_OCMEM 67
> +#define MASTER_VIDEO_P0_OCMEM 68
> +#define MASTER_VIDEO_P1_OCMEM 69
> +#define MASTER_VFE_OCMEM 70
> +#define MASTER_CNOC_ONOC_CFG 71
> +#define MASTER_RPM_INST 72
> +#define MASTER_RPM_DATA 73
> +#define MASTER_RPM_SYS 74
> +#define MASTER_DEHR 75
> +#define MASTER_QDSS_DAP 76
> +#define MASTER_TIC 77
> +#define MASTER_SDCC_1 78
> +#define MASTER_SDCC_3 79
> +#define MASTER_SDCC_4 80
> +#define MASTER_SDCC_2 81
> +#define MASTER_TSIF 82
> +#define MASTER_BAM_DMA 83
> +#define MASTER_BLSP_2 84
> +#define MASTER_USB_HSIC 85
> +#define MASTER_BLSP_1 86
> +#define MASTER_USB_HS 87
> +#define MASTER_PNOC_CFG 88
> +#define MASTER_V_OCMEM_GFX3D 89
> +#define MASTER_IPA 90
> +#define MASTER_QPIC 91
> +#define MASTER_MDPE 92
> +#define MASTER_USB_HS2 93
> +#define MASTER_VPU 94
> +#define MASTER_UFS 95
> +#define MASTER_BCAST 96
> +#define MASTER_CRYPTO_CORE2 97
> +#define MASTER_EMAC 98
> +#define MASTER_VPU_1 99
> +#define MASTER_PCIE_1 100
> +#define MASTER_USB3_1 101
> +#define MASTER_CNOC_MNOC_MMSS_CFG 102
> +#define MASTER_CNOC_MNOC_CFG 103
> +#define MASTER_TCU_0 104
> +#define MASTER_TCU_1 105
> +#define MASTER_CPP 106
> +#define MASTER_AUDIO 107
> +
> +#define SNOC_MM_INT_0 10000
> +#define SNOC_MM_INT_1 10001
> +#define SNOC_MM_INT_2 10002
> +#define SNOC_MM_INT_BIMC 10003
> +#define SNOC_INT_0 10004
> +#define SNOC_INT_1 10005
> +#define SNOC_INT_BIMC 10006
> +#define SNOC_BIMC_0_MAS 10007
> +#define SNOC_BIMC_1_MAS 10008
> +#define SNOC_QDSS_INT 10009
> +#define PNOC_SNOC_MAS 10010
> +#define PNOC_SNOC_SLV 10011
> +#define PNOC_INT_0 10012
> +#define PNOC_INT_1 10013
> +#define PNOC_M_0 10014
> +#define PNOC_M_1 10015
> +#define BIMC_SNOC_MAS 10016
> +#define BIMC_SNOC_SLV 10017
> +#define PNOC_SLV_0 10018
> +#define PNOC_SLV_1 10019
> +#define PNOC_SLV_2 10020
> +#define PNOC_SLV_3 10021
> +#define PNOC_SLV_4 10022
> +#define PNOC_SLV_8 10023
> +#define PNOC_SLV_9 10024
> +#define SNOC_BIMC_0_SLV 10025
> +#define SNOC_BIMC_1_SLV 10026
> +#define MNOC_BIMC_MAS 10027
> +#define MNOC_BIMC_SLV 10028
> +#define BIMC_MNOC_MAS 10029
> +#define BIMC_MNOC_SLV 10030
> +#define SNOC_BIMC_MAS 10031
> +#define SNOC_BIMC_SLV 10032
> +#define CNOC_SNOC_MAS 10033
> +#define CNOC_SNOC_SLV 10034
> +#define SNOC_CNOC_MAS 10035
> +#define SNOC_CNOC_SLV 10036
> +#define OVNOC_SNOC_MAS 10037
> +#define OVNOC_SNOC_SLV 10038
> +#define SNOC_OVNOC_MAS 10039
> +#define SNOC_OVNOC_SLV 10040
> +#define SNOC_PNOC_MAS 10041
> +#define SNOC_PNOC_SLV 10042
> +#define BIMC_INT_APPS_EBI 10043
> +#define BIMC_INT_APPS_SNOC 10044
> +#define SNOC_BIMC_2_MAS 10045
> +#define SNOC_BIMC_2_SLV 10046
> +#define PNOC_SLV_5 10047
> +#define PNOC_SLV_7 10048
> +#define PNOC_INT_2 10049
> +#define PNOC_INT_3 10050
> +#define PNOC_INT_4 10051
> +#define PNOC_INT_5 10052
> +#define PNOC_INT_6 10053
> +#define PNOC_INT_7 10054
> +
> +#define SLAVE_EBI_CH0 512
> +#define SLAVE_EBI_CH1 513
> +#define SLAVE_AMPSS_L2 514
> +#define APPSS_SLAVE_FAB_MMSS 515
> +#define APPSS_SLAVE_FAB_SYSTEM 516
> +#define SYSTEM_SLAVE_FAB_APPS 517
> +#define SLAVE_SPS 518
> +#define SLAVE_SYSTEM_IMEM 519
> +#define SLAVE_AMPSS 520
> +#define SLAVE_MSS 521
> +#define SLAVE_LPASS 522
> +#define SYSTEM_SLAVE_CPSS_FPB 523
> +#define SYSTEM_SLAVE_SYSTEM_FPB 524
> +#define SYSTEM_SLAVE_MMSS_FPB 525
> +#define SLAVE_CORESIGHT 526
> +#define SLAVE_RIVA 527
> +#define SLAVE_SMI 528
> +#define MMSS_SLAVE_FAB_APPS 529
> +#define MMSS_SLAVE_FAB_APPS_1 530
> +#define SLAVE_MM_IMEM 531
> +#define SLAVE_CRYPTO 532
> +#define SLAVE_SPDM 533
> +#define SLAVE_RPM 534
> +#define SLAVE_RPM_MSG_RAM 535
> +#define SLAVE_MPM 536
> +#define SLAVE_PMIC1_SSBI1_A 537
> +#define SLAVE_PMIC1_SSBI1_B 538
> +#define SLAVE_PMIC1_SSBI1_C 539
> +#define SLAVE_PMIC2_SSBI2_A 540
> +#define SLAVE_PMIC2_SSBI2_B 541
> +#define SLAVE_GSBI1_UART 542
> +#define SLAVE_GSBI2_UART 543
> +#define SLAVE_GSBI3_UART 544
> +#define SLAVE_GSBI4_UART 545
> +#define SLAVE_GSBI5_UART 546
> +#define SLAVE_GSBI6_UART 547
> +#define SLAVE_GSBI7_UART 548
> +#define SLAVE_GSBI8_UART 549
> +#define SLAVE_GSBI9_UART 550
> +#define SLAVE_GSBI10_UART 551
> +#define SLAVE_GSBI11_UART 552
> +#define SLAVE_GSBI12_UART 553
> +#define SLAVE_GSBI1_QUP 554
> +#define SLAVE_GSBI2_QUP 555
> +#define SLAVE_GSBI3_QUP 556
> +#define SLAVE_GSBI4_QUP 557
> +#define SLAVE_GSBI5_QUP 558
> +#define SLAVE_GSBI6_QUP 559
> +#define SLAVE_GSBI7_QUP 560
> +#define SLAVE_GSBI8_QUP 561
> +#define SLAVE_GSBI9_QUP 562
> +#define SLAVE_GSBI10_QUP 563
> +#define SLAVE_GSBI11_QUP 564
> +#define SLAVE_GSBI12_QUP 565
> +#define SLAVE_EBI2_NAND 566
> +#define SLAVE_EBI2_CS0 567
> +#define SLAVE_EBI2_CS1 568
> +#define SLAVE_EBI2_CS2 569
> +#define SLAVE_EBI2_CS3 570
> +#define SLAVE_EBI2_CS4 571
> +#define SLAVE_EBI2_CS5 572
> +#define SLAVE_USB_FS1 573
> +#define SLAVE_USB_FS2 574
> +#define SLAVE_TSIF 575
> +#define SLAVE_MSM_TSSC 576
> +#define SLAVE_MSM_PDM 577
> +#define SLAVE_MSM_DIMEM 578
> +#define SLAVE_MSM_TCSR 579
> +#define SLAVE_MSM_PRNG 580
> +#define SLAVE_GSS 581
> +#define SLAVE_SATA 582
> +#define SLAVE_USB3 583
> +#define SLAVE_WCSS 584
> +#define SLAVE_OCIMEM 585
> +#define SLAVE_SNOC_OCMEM 586
> +#define SLAVE_SERVICE_SNOC 587
> +#define SLAVE_QDSS_STM 588
> +#define SLAVE_CAMERA_CFG 589
> +#define SLAVE_DISPLAY_CFG 590
> +#define SLAVE_OCMEM_CFG 591
> +#define SLAVE_CPR_CFG 592
> +#define SLAVE_CPR_XPU_CFG 593
> +#define SLAVE_MISC_CFG 594
> +#define SLAVE_MISC_XPU_CFG 595
> +#define SLAVE_VENUS_CFG 596
> +#define SLAVE_MISC_VENUS_CFG 597
> +#define SLAVE_GRAPHICS_3D_CFG 598
> +#define SLAVE_MMSS_CLK_CFG 599
> +#define SLAVE_MMSS_CLK_XPU_CFG 600
> +#define SLAVE_MNOC_MPU_CFG 601
> +#define SLAVE_ONOC_MPU_CFG 602
> +#define SLAVE_SERVICE_MNOC 603
> +#define SLAVE_OCMEM 604
> +#define SLAVE_SERVICE_ONOC 605
> +#define SLAVE_SDCC_1 606
> +#define SLAVE_SDCC_3 607
> +#define SLAVE_SDCC_2 608
> +#define SLAVE_SDCC_4 609
> +#define SLAVE_BAM_DMA 610
> +#define SLAVE_BLSP_2 611
> +#define SLAVE_USB_HSIC 612
> +#define SLAVE_BLSP_1 613
> +#define SLAVE_USB_HS 614
> +#define SLAVE_PDM 615
> +#define SLAVE_PERIPH_APU_CFG 616
> +#define SLAVE_PNOC_MPU_CFG 617
> +#define SLAVE_PRNG 618
> +#define SLAVE_SERVICE_PNOC 619
> +#define SLAVE_CLK_CTL 620
> +#define SLAVE_CNOC_MSS 621
> +#define SLAVE_SECURITY 622
> +#define SLAVE_TCSR 623
> +#define SLAVE_TLMM 624
> +#define SLAVE_CRYPTO_0_CFG 625
> +#define SLAVE_CRYPTO_1_CFG 626
> +#define SLAVE_IMEM_CFG 627
> +#define SLAVE_MESSAGE_RAM 628
> +#define SLAVE_BIMC_CFG 629
> +#define SLAVE_BOOT_ROM 630
> +#define SLAVE_CNOC_MNOC_MMSS_CFG 631
> +#define SLAVE_PMIC_ARB 632
> +#define SLAVE_SPDM_WRAPPER 633
> +#define SLAVE_DEHR_CFG 634
> +#define SLAVE_QDSS_CFG 635
> +#define SLAVE_RBCPR_CFG 636
> +#define SLAVE_RBCPR_QDSS_APU_CFG 637
> +#define SLAVE_SNOC_MPU_CFG 638
> +#define SLAVE_CNOC_ONOC_CFG 639
> +#define SLAVE_CNOC_MNOC_CFG 640
> +#define SLAVE_PNOC_CFG 641
> +#define SLAVE_SNOC_CFG 642
> +#define SLAVE_EBI1_DLL_CFG 643
> +#define SLAVE_PHY_APU_CFG 644
> +#define SLAVE_EBI1_PHY_CFG 645
> +#define SLAVE_SERVICE_CNOC 646
> +#define SLAVE_IPS_CFG 647
> +#define SLAVE_QPIC 648
> +#define SLAVE_DSI_CFG 649
> +#define SLAVE_UFS_CFG 650
> +#define SLAVE_RBCPR_CX_CFG 651
> +#define SLAVE_RBCPR_MX_CFG 652
> +#define SLAVE_PCIE_CFG 653
> +#define SLAVE_USB_PHYS_CFG 654
> +#define SLAVE_VIDEO_CAP_CFG 655
> +#define SLAVE_AVSYNC_CFG 656
> +#define SLAVE_CRYPTO_2_CFG 657
> +#define SLAVE_VPU_CFG 658
> +#define SLAVE_BCAST_CFG 659
> +#define SLAVE_KLM_CFG 660
> +#define SLAVE_GENI_IR_CFG 661
> +#define SLAVE_OCMEM_GFX 662
> +#define SLAVE_CATS_128 663
> +#define SLAVE_OCMEM_64 664
> +#define SLAVE_PCIE_0 665
> +#define SLAVE_PCIE_1 666
> +#define SLAVE_PCIE_0_CFG 667
> +#define SLAVE_PCIE_1_CFG 668
> +#define SLAVE_SRVC_MNOC 669
> +#define SLAVE_USB_HS2 670
> +#define SLAVE_AUDIO 671
> +#define SLAVE_TCU 672
> +#define SLAVE_APPSS 673
> +#define SLAVE_PCIE_PARF 674
> +#define SLAVE_USB3_PHY_CFG 675
> +#define SLAVE_IPA_CFG 676
> +
> +#endif

  parent reply	other threads:[~2018-05-25  8:27 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-09 21:09 [PATCH v4 0/7] Introduce on-chip interconnect API Georgi Djakov
2018-03-09 21:09 ` [PATCH v4 1/7] interconnect: Add generic " Georgi Djakov
2018-04-06 17:38   ` Matthias Kaehlcke
2018-04-12 13:06     ` Georgi Djakov
2018-05-11 21:30   ` Evan Green
2018-06-06 14:59     ` Georgi Djakov
2018-06-06 18:09       ` Georgi Djakov
2018-06-07  1:06         ` Evan Green
2018-05-25  8:26   ` Amit Kucheria
2018-06-06 15:08     ` Georgi Djakov
2018-06-08 15:57   ` Alexandre Bailon
2018-06-09 19:15     ` Georgi Djakov
2018-03-09 21:09 ` [PATCH v4 2/7] dt-bindings: Introduce interconnect provider bindings Georgi Djakov
2018-03-18 22:50   ` Bjorn Andersson
2018-03-19  9:34     ` Georgi Djakov
2018-04-12 13:15   ` Neil Armstrong
2018-06-06 15:23     ` Georgi Djakov
2018-03-09 21:09 ` [PATCH v4 3/7] interconnect: Add debugfs support Georgi Djakov
2018-03-09 21:09 ` [PATCH v4 4/7] interconnect: qcom: Add RPM communication Georgi Djakov
2018-05-11 21:30   ` Evan Green
2018-06-06 15:00     ` Georgi Djakov
2018-03-09 21:09 ` [PATCH v4 5/7] interconnect: qcom: Add msm8916 interconnect provider driver Georgi Djakov
2018-04-05 22:58   ` Matthias Kaehlcke
2018-04-12 13:09     ` Georgi Djakov
2018-05-11 21:29   ` Evan Green
2018-06-06 15:03     ` Georgi Djakov
2018-05-25  8:27   ` Amit Kucheria [this message]
2018-06-06 15:14     ` Georgi Djakov
2018-03-09 21:09 ` [PATCH v4 6/7] dt-bindings: Introduce interconnect consumers bindings Georgi Djakov
2018-03-18 22:49   ` Bjorn Andersson
2018-03-19  9:41     ` Georgi Djakov
2018-03-09 21:09 ` [PATCH v4 7/7] interconnect: Allow endpoints translation via DT Georgi Djakov
2018-05-11 21:29   ` Evan Green

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHLCerNnoNowC6CfNc7O9Nbj+xy0GGw0qmadOxzGsy5iSrOtOg@mail.gmail.com \
    --to=amit.kucheria@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davidai@quicinc.com \
    --cc=georgi.djakov@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=khilman@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=seansw@qti.qualcomm.com \
    --cc=skannan@codeaurora.org \
    --cc=vincent.guittot@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).