From: Amit Kucheria <amit.kucheria@verdurent.com>
To: Anson Huang <Anson.Huang@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
kernel@pengutronix.de, Fabio Estevam <festevam@gmail.com>,
Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Leonard Crestez <leonard.crestez@nxp.com>,
linux@rempel-privat.de, Peng Fan <peng.fan@nxp.com>,
LKML <linux-kernel@vger.kernel.org>,
lakml <linux-arm-kernel@lists.infradead.org>,
Linux PM list <linux-pm@vger.kernel.org>,
dl-linux-imx <Linux-imx@nxp.com>
Subject: Re: [PATCH 1/3] dt-bindings: firmware: imx: Move system control into dt-binding headfile
Date: Thu, 23 Apr 2020 20:07:35 +0530 [thread overview]
Message-ID: <CAHLCerP3jGUZC+i2i6CEYhOtBjLYKAPe7M0bKUs1b5oQEsdfEg@mail.gmail.com> (raw)
In-Reply-To: <1587650406-20050-1-git-send-email-Anson.Huang@nxp.com>
On Thu, Apr 23, 2020 at 7:38 PM Anson Huang <Anson.Huang@nxp.com> wrote:
>
> i.MX8 SoCs DTS file needs system control macro definitions, so move them
> into dt-binding headfile.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Why am I seeing multiple versions of the same series?
You need to squash this series so that the swapping of the header file
happens in a single patch otherwise compilation will break with only
patch 1 applied.
> ---
> include/dt-bindings/firmware/imx/rsrc.h | 84 +++++++++++++++++++++++++++++++++
> include/linux/firmware/imx/sci.h | 1 -
> include/linux/firmware/imx/types.h | 65 -------------------------
> 3 files changed, 84 insertions(+), 66 deletions(-)
> delete mode 100644 include/linux/firmware/imx/types.h
>
> diff --git a/include/dt-bindings/firmware/imx/rsrc.h b/include/dt-bindings/firmware/imx/rsrc.h
> index 4e61f64..51906b9 100644
> --- a/include/dt-bindings/firmware/imx/rsrc.h
> +++ b/include/dt-bindings/firmware/imx/rsrc.h
> @@ -547,4 +547,88 @@
> #define IMX_SC_R_ATTESTATION 545
> #define IMX_SC_R_LAST 546
>
> +/*
> + * Defines for SC PM CLK
> + */
> +#define IMX_SC_PM_CLK_SLV_BUS 0 /* Slave bus clock */
> +#define IMX_SC_PM_CLK_MST_BUS 1 /* Master bus clock */
> +#define IMX_SC_PM_CLK_PER 2 /* Peripheral clock */
> +#define IMX_SC_PM_CLK_PHY 3 /* Phy clock */
> +#define IMX_SC_PM_CLK_MISC 4 /* Misc clock */
> +#define IMX_SC_PM_CLK_MISC0 0 /* Misc 0 clock */
> +#define IMX_SC_PM_CLK_MISC1 1 /* Misc 1 clock */
> +#define IMX_SC_PM_CLK_MISC2 2 /* Misc 2 clock */
> +#define IMX_SC_PM_CLK_MISC3 3 /* Misc 3 clock */
> +#define IMX_SC_PM_CLK_MISC4 4 /* Misc 4 clock */
> +#define IMX_SC_PM_CLK_CPU 2 /* CPU clock */
> +#define IMX_SC_PM_CLK_PLL 4 /* PLL */
> +#define IMX_SC_PM_CLK_BYPASS 4 /* Bypass clock */
> +
> +/*
> + * Defines for SC CONTROL
> + */
> +#define IMX_SC_C_TEMP 0U
> +#define IMX_SC_C_TEMP_HI 1U
> +#define IMX_SC_C_TEMP_LOW 2U
> +#define IMX_SC_C_PXL_LINK_MST1_ADDR 3U
> +#define IMX_SC_C_PXL_LINK_MST2_ADDR 4U
> +#define IMX_SC_C_PXL_LINK_MST_ENB 5U
> +#define IMX_SC_C_PXL_LINK_MST1_ENB 6U
> +#define IMX_SC_C_PXL_LINK_MST2_ENB 7U
> +#define IMX_SC_C_PXL_LINK_SLV1_ADDR 8U
> +#define IMX_SC_C_PXL_LINK_SLV2_ADDR 9U
> +#define IMX_SC_C_PXL_LINK_MST_VLD 10U
> +#define IMX_SC_C_PXL_LINK_MST1_VLD 11U
> +#define IMX_SC_C_PXL_LINK_MST2_VLD 12U
> +#define IMX_SC_C_SINGLE_MODE 13U
> +#define IMX_SC_C_ID 14U
> +#define IMX_SC_C_PXL_CLK_POLARITY 15U
> +#define IMX_SC_C_LINESTATE 16U
> +#define IMX_SC_C_PCIE_G_RST 17U
> +#define IMX_SC_C_PCIE_BUTTON_RST 18U
> +#define IMX_SC_C_PCIE_PERST 19U
> +#define IMX_SC_C_PHY_RESET 20U
> +#define IMX_SC_C_PXL_LINK_RATE_CORRECTION 21U
> +#define IMX_SC_C_PANIC 22U
> +#define IMX_SC_C_PRIORITY_GROUP 23U
> +#define IMX_SC_C_TXCLK 24U
> +#define IMX_SC_C_CLKDIV 25U
> +#define IMX_SC_C_DISABLE_50 26U
> +#define IMX_SC_C_DISABLE_125 27U
> +#define IMX_SC_C_SEL_125 28U
> +#define IMX_SC_C_MODE 29U
> +#define IMX_SC_C_SYNC_CTRL0 30U
> +#define IMX_SC_C_KACHUNK_CNT 31U
> +#define IMX_SC_C_KACHUNK_SEL 32U
> +#define IMX_SC_C_SYNC_CTRL1 33U
> +#define IMX_SC_C_DPI_RESET 34U
> +#define IMX_SC_C_MIPI_RESET 35U
> +#define IMX_SC_C_DUAL_MODE 36U
> +#define IMX_SC_C_VOLTAGE 37U
> +#define IMX_SC_C_PXL_LINK_SEL 38U
> +#define IMX_SC_C_OFS_SEL 39U
> +#define IMX_SC_C_OFS_AUDIO 40U
> +#define IMX_SC_C_OFS_PERIPH 41U
> +#define IMX_SC_C_OFS_IRQ 42U
> +#define IMX_SC_C_RST0 43U
> +#define IMX_SC_C_RST1 44U
> +#define IMX_SC_C_SEL0 45U
> +#define IMX_SC_C_CALIB0 46U
> +#define IMX_SC_C_CALIB1 47U
> +#define IMX_SC_C_CALIB2 48U
> +#define IMX_SC_C_IPG_DEBUG 49U
> +#define IMX_SC_C_IPG_DOZE 50U
> +#define IMX_SC_C_IPG_WAIT 51U
> +#define IMX_SC_C_IPG_STOP 52U
> +#define IMX_SC_C_IPG_STOP_MODE 53U
> +#define IMX_SC_C_IPG_STOP_ACK 54U
> +#define IMX_SC_C_SYNC_CTRL 55U
> +#define IMX_SC_C_OFS_AUDIO_ALT 56U
> +#define IMX_SC_C_DSP_BYP 57U
> +#define IMX_SC_C_CLK_GEN_EN 58U
> +#define IMX_SC_C_INTF_SEL 59U
> +#define IMX_SC_C_RXC_DLY 60U
> +#define IMX_SC_C_TIMER_SEL 61U
> +#define IMX_SC_C_LAST 62U
> +
> #endif /* __DT_BINDINGS_RSCRC_IMX_H */
> diff --git a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h
> index 17ba4e4..3fa418a 100644
> --- a/include/linux/firmware/imx/sci.h
> +++ b/include/linux/firmware/imx/sci.h
> @@ -11,7 +11,6 @@
> #define _SC_SCI_H
>
> #include <linux/firmware/imx/ipc.h>
> -#include <linux/firmware/imx/types.h>
>
> #include <linux/firmware/imx/svc/misc.h>
> #include <linux/firmware/imx/svc/pm.h>
> diff --git a/include/linux/firmware/imx/types.h b/include/linux/firmware/imx/types.h
> deleted file mode 100644
> index 8082110..0000000
> --- a/include/linux/firmware/imx/types.h
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (C) 2016 Freescale Semiconductor, Inc.
> - * Copyright 2017~2018 NXP
> - *
> - * Header file containing types used across multiple service APIs.
> - */
> -
> -#ifndef _SC_TYPES_H
> -#define _SC_TYPES_H
> -
> -/*
> - * This type is used to indicate a control.
> - */
> -enum imx_sc_ctrl {
> - IMX_SC_C_TEMP = 0,
> - IMX_SC_C_TEMP_HI = 1,
> - IMX_SC_C_TEMP_LOW = 2,
> - IMX_SC_C_PXL_LINK_MST1_ADDR = 3,
> - IMX_SC_C_PXL_LINK_MST2_ADDR = 4,
> - IMX_SC_C_PXL_LINK_MST_ENB = 5,
> - IMX_SC_C_PXL_LINK_MST1_ENB = 6,
> - IMX_SC_C_PXL_LINK_MST2_ENB = 7,
> - IMX_SC_C_PXL_LINK_SLV1_ADDR = 8,
> - IMX_SC_C_PXL_LINK_SLV2_ADDR = 9,
> - IMX_SC_C_PXL_LINK_MST_VLD = 10,
> - IMX_SC_C_PXL_LINK_MST1_VLD = 11,
> - IMX_SC_C_PXL_LINK_MST2_VLD = 12,
> - IMX_SC_C_SINGLE_MODE = 13,
> - IMX_SC_C_ID = 14,
> - IMX_SC_C_PXL_CLK_POLARITY = 15,
> - IMX_SC_C_LINESTATE = 16,
> - IMX_SC_C_PCIE_G_RST = 17,
> - IMX_SC_C_PCIE_BUTTON_RST = 18,
> - IMX_SC_C_PCIE_PERST = 19,
> - IMX_SC_C_PHY_RESET = 20,
> - IMX_SC_C_PXL_LINK_RATE_CORRECTION = 21,
> - IMX_SC_C_PANIC = 22,
> - IMX_SC_C_PRIORITY_GROUP = 23,
> - IMX_SC_C_TXCLK = 24,
> - IMX_SC_C_CLKDIV = 25,
> - IMX_SC_C_DISABLE_50 = 26,
> - IMX_SC_C_DISABLE_125 = 27,
> - IMX_SC_C_SEL_125 = 28,
> - IMX_SC_C_MODE = 29,
> - IMX_SC_C_SYNC_CTRL0 = 30,
> - IMX_SC_C_KACHUNK_CNT = 31,
> - IMX_SC_C_KACHUNK_SEL = 32,
> - IMX_SC_C_SYNC_CTRL1 = 33,
> - IMX_SC_C_DPI_RESET = 34,
> - IMX_SC_C_MIPI_RESET = 35,
> - IMX_SC_C_DUAL_MODE = 36,
> - IMX_SC_C_VOLTAGE = 37,
> - IMX_SC_C_PXL_LINK_SEL = 38,
> - IMX_SC_C_OFS_SEL = 39,
> - IMX_SC_C_OFS_AUDIO = 40,
> - IMX_SC_C_OFS_PERIPH = 41,
> - IMX_SC_C_OFS_IRQ = 42,
> - IMX_SC_C_RST0 = 43,
> - IMX_SC_C_RST1 = 44,
> - IMX_SC_C_SEL0 = 45,
> - IMX_SC_C_LAST
> -};
> -
> -#endif /* _SC_TYPES_H */
> --
> 2.7.4
>
next prev parent reply other threads:[~2020-04-23 14:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-23 14:00 [PATCH 1/3] dt-bindings: firmware: imx: Move system control into dt-binding headfile Anson Huang
2020-04-23 14:00 ` [PATCH 2/3] firmware: imx: Remove unused include of linux/firmware/imx/types.h Anson Huang
2020-04-23 14:00 ` [PATCH 3/3] thermal: imx_sc: Include rsrc.h instead of types.h Anson Huang
2020-04-23 14:37 ` Amit Kucheria [this message]
2020-04-23 15:39 ` [PATCH 1/3] dt-bindings: firmware: imx: Move system control into dt-binding headfile Anson Huang
2020-04-23 15:13 ` Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHLCerP3jGUZC+i2i6CEYhOtBjLYKAPe7M0bKUs1b5oQEsdfEg@mail.gmail.com \
--to=amit.kucheria@verdurent.com \
--cc=Anson.Huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=daniel.lezcano@linaro.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).