linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yang Shi <shy828301@gmail.com>
To: "Zach O'Keefe" <zokeefe@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Matthew Wilcox <willy@infradead.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linux MM <linux-mm@kvack.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [v3 PATCH 4/7] mm: khugepaged: use transhuge_vma_suitable replace open-code
Date: Fri, 10 Jun 2022 20:25:18 -0700	[thread overview]
Message-ID: <CAHbLzkrebC-jug86B4w2gkSxiiEUWWjrxBwjevX9q2adG04nzQ@mail.gmail.com> (raw)
In-Reply-To: <CAAa6QmT4mvpLMdtRV+tJJsPBBbPGuWVzKs5eoFBahG0s_Mba0Q@mail.gmail.com>

On Fri, Jun 10, 2022 at 5:28 PM Zach O'Keefe <zokeefe@google.com> wrote:
>
> On Fri, Jun 10, 2022 at 3:04 PM Yang Shi <shy828301@gmail.com> wrote:
> >
> > On Fri, Jun 10, 2022 at 9:59 AM Yang Shi <shy828301@gmail.com> wrote:
> > >
> > > On Thu, Jun 9, 2022 at 6:52 PM Zach O'Keefe <zokeefe@google.com> wrote:
> > > >
> > > > On Mon, Jun 6, 2022 at 2:44 PM Yang Shi <shy828301@gmail.com> wrote:
> > > > >
> > > > > The hugepage_vma_revalidate() needs to check if the address is still in
> > > > > the aligned HPAGE_PMD_SIZE area of the vma when reacquiring mmap_lock,
> > > > > but it was open-coded, use transhuge_vma_suitable() to do the job.  And
> > > > > add proper comments for transhuge_vma_suitable().
> > > > >
> > > > > Signed-off-by: Yang Shi <shy828301@gmail.com>
> > > > > ---
> > > > >  include/linux/huge_mm.h | 6 ++++++
> > > > >  mm/khugepaged.c         | 5 +----
> > > > >  2 files changed, 7 insertions(+), 4 deletions(-)
> > > > >
> > > > > diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
> > > > > index a8f61db47f2a..79d5919beb83 100644
> > > > > --- a/include/linux/huge_mm.h
> > > > > +++ b/include/linux/huge_mm.h
> > > > > @@ -128,6 +128,12 @@ static inline bool transhuge_vma_size_ok(struct vm_area_struct *vma)
> > > > >         return false;
> > > > >  }
> > > > >
> > > > > +/*
> > > > > + * Do the below checks:
> > > > > + *   - For non-anon vma, check if the vm_pgoff is HPAGE_PMD_NR aligned.
> > > > > + *   - For all vmas, check if the haddr is in an aligned HPAGE_PMD_SIZE
> > > > > + *     area.
> > > > > + */
> > > >
> > > > AFAIK we aren't checking if vm_pgoff is HPAGE_PMD_NR aligned, but
> > > > rather that linear_page_index(vma, round_up(vma->vm_start,
> > > > HPAGE_PMD_SIZE)) is HPAGE_PMD_NR aligned within vma->vm_file. I was
> > >
> > > Yeah, you are right.
> > >
> > > > pretty confused about this (hopefully I have it right now - if not -
> > > > case and point :) ), so it might be a good opportunity to add some
> > > > extra commentary to help future travelers understand why this
> > > > constraint exists.
> > >
> > > I'm not fully sure I understand this 100%. I think this is related to
> > > how page cache is structured. I will try to add more comments.
> >
> > How's about "The underlying THP is always properly aligned in page
> > cache, but it may be across the boundary of VMA if the VMA is
> > misaligned, so the THP can't be PMD mapped for this case."
>
> I could certainly still be wrong / am learning here - but I *thought*
> the reason for this check was to make sure that the hugepage
> to-be-collapsed is naturally aligned within the file (since, AFAIK,
> without this constraint, different mm's might have different ideas
> about where hugepages in the file should be).

The hugepage is definitely naturally aligned within the file, this is
guaranteed by how page cache is organized, you could find some example
code from shmem fault, for example, the below code snippet:

hindex = round_down(index, folio_nr_pages(folio));
error = shmem_add_to_page_cache(folio, mapping, hindex, NULL, gfp &
GFP_RECLAIM_MASK, charge_mm);

The index is actually rounded down to HPAGE_PMD_NR aligned.

The check in hugepage_vma_check() is used to guarantee there is an PMD
aligned area in the vma exactly overlapping with a PMD range in the
page cache. For example, you have a vma starting from 0x1000 maps to
the file's page offset of 0, even though you get THP for the file, it
can not be PMD mapped to the vma. But if it maps to the file's page
offset of 1, then starting from 0x200000 (assuming the vma is big
enough) it can PMD map the second THP in the page cache. Does it make
sense?

>
> > >
> > > >
> > > > Also I wonder while we're at it if we can rename this to
> > > > transhuge_addr_aligned() or transhuge_addr_suitable() or something.
> > >
> > > I think it is still actually used to check vma.
> > >
> > > >
> > > > Otherwise I think the change is a nice cleanup.
> > > >
> > > > >  static inline bool transhuge_vma_suitable(struct vm_area_struct *vma,
> > > > >                 unsigned long addr)
> > > > >  {
> > > > > diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> > > > > index 7a5d1c1a1833..ca1754d3a827 100644
> > > > > --- a/mm/khugepaged.c
> > > > > +++ b/mm/khugepaged.c
> > > > > @@ -951,7 +951,6 @@ static int hugepage_vma_revalidate(struct mm_struct *mm, unsigned long address,
> > > > >                 struct vm_area_struct **vmap)
> > > > >  {
> > > > >         struct vm_area_struct *vma;
> > > > > -       unsigned long hstart, hend;
> > > > >
> > > > >         if (unlikely(khugepaged_test_exit(mm)))
> > > > >                 return SCAN_ANY_PROCESS;
> > > > > @@ -960,9 +959,7 @@ static int hugepage_vma_revalidate(struct mm_struct *mm, unsigned long address,
> > > > >         if (!vma)
> > > > >                 return SCAN_VMA_NULL;
> > > > >
> > > > > -       hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK;
> > > > > -       hend = vma->vm_end & HPAGE_PMD_MASK;
> > > > > -       if (address < hstart || address + HPAGE_PMD_SIZE > hend)
> > > > > +       if (!transhuge_vma_suitable(vma, address))
> > > > >                 return SCAN_ADDRESS_RANGE;
> > > > >         if (!hugepage_vma_check(vma, vma->vm_flags))
> > > > >                 return SCAN_VMA_CHECK;
> > > > > --
> > > > > 2.26.3
> > > > >
> > > > >

  reply	other threads:[~2022-06-11  3:25 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-06 21:44 [mm-unstable v3 PATCH 0/7] Cleanup transhuge_xxx helpers Yang Shi
2022-06-06 21:44 ` [v3 PATCH 1/7] mm: khugepaged: check THP flag in hugepage_vma_check() Yang Shi
2022-06-09 17:49   ` Zach O'Keefe
2022-06-10  7:09   ` Miaohe Lin
2022-06-06 21:44 ` [v3 PATCH 2/7] mm: thp: introduce transhuge_vma_size_ok() helper Yang Shi
2022-06-09 22:21   ` Zach O'Keefe
2022-06-10  0:08     ` Yang Shi
2022-06-10  0:51       ` Zach O'Keefe
2022-06-10 16:38         ` Yang Shi
2022-06-10 21:24           ` Yang Shi
2022-06-10  7:20   ` Miaohe Lin
2022-06-10 16:47     ` Yang Shi
2022-06-06 21:44 ` [v3 PATCH 3/7] mm: khugepaged: remove the redundant anon vma check Yang Shi
2022-06-09 23:23   ` Zach O'Keefe
2022-06-10  0:01     ` Yang Shi
2022-06-10  7:23   ` Miaohe Lin
2022-06-10  7:28     ` Miaohe Lin
2022-06-06 21:44 ` [v3 PATCH 4/7] mm: khugepaged: use transhuge_vma_suitable replace open-code Yang Shi
2022-06-10  1:51   ` Zach O'Keefe
2022-06-10 16:59     ` Yang Shi
2022-06-10 22:03       ` Yang Shi
2022-06-11  0:27         ` Zach O'Keefe
2022-06-11  3:25           ` Yang Shi [this message]
2022-06-11 21:43             ` Zach O'Keefe
2022-06-14 17:40               ` Yang Shi
2022-06-06 21:44 ` [v3 PATCH 5/7] mm: thp: kill transparent_hugepage_active() Yang Shi
2022-06-10  1:02   ` Zach O'Keefe
2022-06-10 17:02     ` Yang Shi
2022-06-13 15:06       ` Zach O'Keefe
2022-06-14 19:16         ` Yang Shi
2022-06-06 21:44 ` [v3 PATCH 6/7] mm: thp: kill __transhuge_page_enabled() Yang Shi
2022-06-10  2:22   ` Zach O'Keefe
2022-06-10 17:24     ` Yang Shi
2022-06-10 21:07       ` Yang Shi
2022-06-13 14:54         ` Zach O'Keefe
2022-06-14 18:51           ` Yang Shi
2022-06-14 23:55             ` Zach O'Keefe
2022-06-06 21:44 ` [v3 PATCH 7/7] mm: khugepaged: reorg some khugepaged helpers Yang Shi
2022-06-09 23:32 ` [mm-unstable v3 PATCH 0/7] Cleanup transhuge_xxx helpers Zach O'Keefe
2022-06-10  7:08 ` Miaohe Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHbLzkrebC-jug86B4w2gkSxiiEUWWjrxBwjevX9q2adG04nzQ@mail.gmail.com \
    --to=shy828301@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=vbabka@suse.cz \
    --cc=willy@infradead.org \
    --cc=zokeefe@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).