From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752826Ab3JILqB (ORCPT ); Wed, 9 Oct 2013 07:46:01 -0400 Received: from mail-pb0-f50.google.com ([209.85.160.50]:52645 "EHLO mail-pb0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751707Ab3JILp7 (ORCPT ); Wed, 9 Oct 2013 07:45:59 -0400 MIME-Version: 1.0 In-Reply-To: <2164701.s7N3W4ap0C@amdc1032> References: <1377668719-8602-2-git-send-email-ch.naveen@samsung.com> <1378268629-2886-3-git-send-email-ch.naveen@samsung.com> <2164701.s7N3W4ap0C@amdc1032> From: Naveen Krishna Ch Date: Wed, 9 Oct 2013 17:15:37 +0530 Message-ID: Subject: Re: [PATCH 3/3] thermal: samsung: Add TMU support for Exynos5420 SoCs To: Bartlomiej Zolnierkiewicz Cc: Naveen Krishna Chatradhi , linux-pm@vger.kernel.org, rui.zhang@intel.com, eduardo.valentin@ti.com, "linux-samsung-soc@vger.kernel.org" , linux-kernel@vger.kernel.org, amit.daniel@samsung.com, Kukjin Kim , devicetree@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello Bartlomiej, On 3 October 2013 18:12, Bartlomiej Zolnierkiewicz wrote: > > Hi, > > I would like to see few minor cleanup changes, please see below: Sure. > > On Thursday, October 03, 2013 05:31:42 PM Naveen Krishna Ch wrote: >> On 4 September 2013 09:53, Naveen Krishna Chatradhi >> wrote: >> > This patch adds the neccessary register changes and arch information >> > to support Exynos5420 SoCs >> > Exynos5420 has 5 TMU channels one for each CPU 0, 1, 2 and 3 and GPU >> > >> > Also updated the Documentation at >> > Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> > >> > Note: The platform data structure will be handled properly once the driver >> > moves to complete device driver solution. >> > >> > Signed-off-by: Naveen Krishna Chatradhi >> > --- >> > Changes since v1: >> > 1. modified the platform data structure in order to pass SHARED flag >> > for channels that need sharing of address space. >> > 2. https://lkml.org/lkml/2013/8/1/38 is merged into this patch. >> > As the changes are minimum and can be added here. >> > >> > .../devicetree/bindings/thermal/exynos-thermal.txt | 39 ++++++ >> > drivers/thermal/samsung/exynos_tmu.c | 14 ++- >> > drivers/thermal/samsung/exynos_tmu.h | 1 + >> > drivers/thermal/samsung/exynos_tmu_data.c | 130 ++++++++++++++++++++ >> > drivers/thermal/samsung/exynos_tmu_data.h | 7 ++ >> > 5 files changed, 189 insertions(+), 2 deletions(-) >> > >> > diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> > index 116cca0..d70f2a4 100644 >> > --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> > +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> > @@ -7,12 +7,23 @@ >> > "samsung,exynos4210-tmu" >> > "samsung,exynos5250-tmu" >> > "samsung,exynos5440-tmu" >> > + "samsung,exynos5420-tmu" > > it should come before "samsung,exynos5440-tmu" Done > >> > - interrupt-parent : The phandle for the interrupt controller >> > - reg : Address range of the thermal registers. For soc's which has multiple >> > instances of TMU and some registers are shared across all TMU's like >> > interrupt related then 2 set of register has to supplied. First set >> > belongs to each instance of TMU and second set belongs to second set >> > of common TMU registers. >> > + NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU >> > + channels 2, 3 and 4 >> > + >> > + TRIMINFO at 0x1006c000 contains data for TMU channel 3 >> > + TRIMINFO at 0x100a0000 contains data for TMU channel 4 >> > + TRIMINFO at 0x10068000 contains data for TMU channel 2 >> > + >> > + The misplaced register address is passed through devicetree as the >> > + second base >> > + >> > - interrupts : Should contain interrupt for thermal system >> > - clocks : The main clock for TMU device >> > - clock-names : Thermal system clock name >> > @@ -43,6 +54,34 @@ Example 2): >> > clock-names = "tmu_apbif"; >> > }; >> > >> > +Example 3): (In case of Exynos5420) >> > + /* tmu for CPU2 */ >> > + tmu@10068000 { >> > + compatible = "samsung,exynos5420-tmu"; >> > + reg = <0x10068000 0x100>, <0x1006c000 0x4>; >> > + interrupts = <0 184 0>; >> > + clocks = <&clock 318>; >> > + clock-names = "tmu_apbif"; >> > + }; >> > + >> > + /* tmu for CPU3 */ >> > + tmu@1006c000 { >> > + compatible = "samsung,exynos5420-tmu"; >> > + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; >> > + interrupts = <0 185 0>; >> > + clocks = <&clock 318>; >> > + clock-names = "tmu_apbif"; >> > + }; >> > + >> > + /* tmu for GPU */ >> > + tmu@100a0000 { >> > + compatible = "samsung,exynos5420-tmu"; >> > + reg = <0x100a0000 0x100>, <0x10068000 0x4>; >> > + interrupts = <0 215 0>; >> > + clocks = <&clock 318>; >> > + clock-names = "tmu_apbif"; >> > + }; >> > + >> > Note: For multi-instance tmu each instance should have an alias correctly >> > numbered in "aliases" node. >> > >> > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >> > index 3a55caf..6d34652 100644 >> > --- a/drivers/thermal/samsung/exynos_tmu.c >> > +++ b/drivers/thermal/samsung/exynos_tmu.c >> > @@ -186,7 +186,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev) >> > EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); >> > } >> > } else { >> > - trim_info = readl(data->base + reg->triminfo_data); >> > + /* On exynos5420 the triminfo register is in the shared space */ >> > + if (data->base_second && (data->soc == SOC_ARCH_EXYNOS5420)) >> > + trim_info = readl(data->base_second + >> > + reg->triminfo_data); >> > + else >> > + trim_info = readl(data->base + reg->triminfo_data); >> > } >> > data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; >> > data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & >> > @@ -499,6 +504,10 @@ static const struct of_device_id exynos_tmu_match[] = { >> > .compatible = "samsung,exynos5440-tmu", >> > .data = (void *)EXYNOS5440_TMU_DRV_DATA, >> > }, >> > + { >> > + .compatible = "samsung,exynos5420-tmu", >> > + .data = (void *)EXYNOS5420_TMU_DRV_DATA, >> > + }, > > it should come before 5440 entry Done > >> > {}, >> > }; >> > MODULE_DEVICE_TABLE(of, exynos_tmu_match); >> > @@ -637,7 +646,8 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> > >> > if (pdata->type == SOC_ARCH_EXYNOS || >> > pdata->type == SOC_ARCH_EXYNOS4210 || >> > - pdata->type == SOC_ARCH_EXYNOS5440) >> > + pdata->type == SOC_ARCH_EXYNOS5440 || >> > + pdata->type == SOC_ARCH_EXYNOS5420) > > please check for 5420 before 5440 Done > >> > data->soc = pdata->type; >> > else { >> > ret = -EINVAL; >> > diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h >> > index ebd2ec1..774ab03 100644 >> > --- a/drivers/thermal/samsung/exynos_tmu.h >> > +++ b/drivers/thermal/samsung/exynos_tmu.h >> > @@ -43,6 +43,7 @@ enum soc_type { >> > SOC_ARCH_EXYNOS4210 = 1, >> > SOC_ARCH_EXYNOS, >> > SOC_ARCH_EXYNOS5440, >> > + SOC_ARCH_EXYNOS5420, > > 5420 should come before 5440 Done > >> > }; >> > >> > /** >> > diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c >> > index 58570d0..a6d5cb5 100644 >> > --- a/drivers/thermal/samsung/exynos_tmu_data.c >> > +++ b/drivers/thermal/samsung/exynos_tmu_data.c >> > @@ -177,6 +177,136 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { >> > }; >> > #endif >> > >> > +#if defined(CONFIG_SOC_EXYNOS5420) >> > +static const struct exynos_tmu_registers exynos5420_tmu_registers = { >> > + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, >> > + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, >> > + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, >> > + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, >> > + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, >> > + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, >> > + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, >> > + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, >> > + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, >> > + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, >> > + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, >> > + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, >> > + .tmu_status = EXYNOS_TMU_REG_STATUS, >> > + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, >> > + .threshold_th0 = EXYNOS_THD_TEMP_RISE, >> > + .threshold_th1 = EXYNOS_THD_TEMP_FALL, >> > + .tmu_inten = EXYNOS_TMU_REG_INTEN, >> > + .inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK, >> > + .inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, >> > + .inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK, >> > + .inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT, >> > + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, >> > + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, >> > + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, >> > + /* INTEN_RISE3 Not availble in exynos5420 */ >> > + .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, >> > + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, >> > + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, >> > + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, >> > + .intclr_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT, >> > + .emul_con = EXYNOS_EMUL_CON, >> > + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, >> > + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, >> > + .emul_time_mask = EXYNOS_EMUL_TIME_MASK, >> > +}; >> > + >> > +#define EXYNOS5420_TMU_DATA \ >> > + .threshold_falling = 10, \ >> > + .trigger_levels[0] = 85, \ >> > + .trigger_levels[1] = 103, \ >> > + .trigger_levels[2] = 110, \ >> > + .trigger_levels[3] = 120, \ >> > + .trigger_enable[0] = true, \ >> > + .trigger_enable[1] = true, \ >> > + .trigger_enable[2] = true, \ >> > + .trigger_enable[3] = false, \ >> > + .trigger_type[0] = THROTTLE_ACTIVE, \ >> > + .trigger_type[1] = THROTTLE_ACTIVE, \ >> > + .trigger_type[2] = SW_TRIP, \ >> > + .trigger_type[3] = HW_TRIP, \ >> > + .max_trigger_level = 4, \ >> > + .gain = 8, \ >> > + .reference_voltage = 16, \ >> > + .noise_cancel_mode = 4, \ >> > + .cal_type = TYPE_ONE_POINT_TRIMMING, \ >> > + .efuse_value = 55, \ >> > + .min_efuse_value = 40, \ >> > + .max_efuse_value = 100, \ >> > + .first_point_trim = 25, \ >> > + .second_point_trim = 85, \ >> > + .default_temp_offset = 50, \ >> > + .freq_tab[0] = { \ >> > + .freq_clip_max = 800 * 1000, \ >> > + .temp_level = 85, \ >> > + }, \ >> > + .freq_tab[1] = { \ >> > + .freq_clip_max = 200 * 1000, \ >> > + .temp_level = 103, \ >> > + }, \ >> > + .freq_tab_count = 2, \ >> > + .type = SOC_ARCH_EXYNOS5420, \ >> > + .registers = &exynos5420_tmu_registers, \ >> > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ >> > + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ >> > + TMU_SUPPORT_EMUL_TIME) >> > + >> > +#define EXYNOS5420_TMU_DATA_SHARED \ >> > + .threshold_falling = 10, \ >> > + .trigger_levels[0] = 85, \ >> > + .trigger_levels[1] = 103, \ >> > + .trigger_levels[2] = 110, \ >> > + .trigger_levels[3] = 120, \ >> > + .trigger_enable[0] = true, \ >> > + .trigger_enable[1] = true, \ >> > + .trigger_enable[2] = true, \ >> > + .trigger_enable[3] = false, \ >> > + .trigger_type[0] = THROTTLE_ACTIVE, \ >> > + .trigger_type[1] = THROTTLE_ACTIVE, \ >> > + .trigger_type[2] = SW_TRIP, \ >> > + .trigger_type[3] = HW_TRIP, \ >> > + .max_trigger_level = 4, \ >> > + .gain = 8, \ >> > + .reference_voltage = 16, \ >> > + .noise_cancel_mode = 4, \ >> > + .cal_type = TYPE_ONE_POINT_TRIMMING, \ >> > + .efuse_value = 55, \ >> > + .min_efuse_value = 40, \ >> > + .max_efuse_value = 100, \ >> > + .first_point_trim = 25, \ >> > + .second_point_trim = 85, \ >> > + .default_temp_offset = 50, \ >> > + .freq_tab[0] = { \ >> > + .freq_clip_max = 800 * 1000, \ >> > + .temp_level = 85, \ >> > + }, \ >> > + .freq_tab[1] = { \ >> > + .freq_clip_max = 200 * 1000, \ >> > + .temp_level = 103, \ >> > + }, \ >> > + .freq_tab_count = 2, \ >> > + .type = SOC_ARCH_EXYNOS5420, \ >> > + .registers = &exynos5420_tmu_registers, \ >> > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ >> > + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ >> > + TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) > > EXYNOS5420_TMU_DATA and EXYNOS5420_TMU_DATA_SHARED are identical > besides .features content so to avoid code duplication please define > __EXYNOS5420_TMU_DATA with all shared entries and just do: > > #define EXYNOS5420_TMU_DATA \ > __EXYNOS5420_TMU_DATA \ > .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ > TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ > TMU_SUPPORT_EMUL_TIME) > > #define EXYNOS5420_TMU_DATA_SHARED \ > __EXYNOS5420_TMU_DATA \ > .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ > TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ > TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) yeah, It saves. > >> > +struct exynos_tmu_init_data const exynos5420_default_tmu_data = { >> > + .tmu_data = { >> > + { EXYNOS5420_TMU_DATA }, >> > + { EXYNOS5420_TMU_DATA }, >> > + { EXYNOS5420_TMU_DATA_SHARED }, >> > + { EXYNOS5420_TMU_DATA_SHARED }, >> > + { EXYNOS5420_TMU_DATA_SHARED }, >> > + }, >> > + .tmu_count = 5, >> > +}; >> > +#endif >> > + >> > #if defined(CONFIG_SOC_EXYNOS5440) >> > static const struct exynos_tmu_registers exynos5440_tmu_registers = { >> > .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, >> > diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h >> > index 8788a87..3ce94cd 100644 >> > --- a/drivers/thermal/samsung/exynos_tmu_data.h >> > +++ b/drivers/thermal/samsung/exynos_tmu_data.h >> > @@ -153,4 +153,11 @@ extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; >> > #define EXYNOS5440_TMU_DRV_DATA (NULL) >> > #endif >> > >> > +#if defined(CONFIG_SOC_EXYNOS5420) >> > +extern struct exynos_tmu_init_data const exynos5420_default_tmu_data; >> > +#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data) >> > +#else >> > +#define EXYNOS5420_TMU_DRV_DATA (NULL) >> > +#endif > > this should come before 5440 entry Done > >> > #endif /*_EXYNOS_TMU_DATA_H*/ >> > -- >> > 1.7.9.5 >> Hello All, >> >> Amit Daniel, has Acked these patches a while ago >> Any other review comments or updates on this patch ?? >> > >> >> >> Thanks & Regards, > > Best regards, Thanks for review and the suggestions. will post v4 right away. > -- > Bartlomiej Zolnierkiewicz > Samsung R&D Institute Poland > Samsung Electronics > -- Shine bright, (: Nav :)