LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
To: Doug Anderson <dianders@chromium.org>
Cc: Jonathan Cameron <jic23@kernel.org>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Naveen Krishna Chatradhi <ch.naveen@samsung.com>,
	Olof Johansson <olof@lixom.net>,
	Guenter Roeck <linux@roeck-us.net>,
	Russell King <linux@arm.linux.org.uk>,
	Rahul Sharma <rahul.sharma@samsung.com>,
	Thomas Abraham <thomas.abraham@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow
Date: Wed, 27 Mar 2013 11:36:47 -0700
Message-ID: <CAHfPSqCNvX6PhWPYOh8whjV=TmOwy5B7FX0QAno_cfghYGx5_w@mail.gmail.com> (raw)
In-Reply-To: <CAHfPSqDnbfmHVeuDeDFZearm1sSVA9YsJ5668iwtKHUt_gEDRw@mail.gmail.com>

On 15 March 2013 08:42, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote:
> On 15 March 2013 15:54, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote:
>> Doug,
>>
>> On 14 March 2013 02:10, Doug Anderson <dianders@chromium.org> wrote:
>>> Hook up the exynos5250-snow thermistors via the device tree now that
>>> there's a driver available to use them.
>>>
>>> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Tested-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> used these changes to test on snow before submitting the ADC and NTC
> driver changes.
Kukjin, Any update on this patch. you want us to rebase it ?

>>> ---
>>> Changes in v2:
>>> - Match 'uV' -> 'uv' change in Naveen's bindings.
>>>
>>>  arch/arm/boot/dts/cros5250-common.dtsi |  4 ++++
>>>  arch/arm/boot/dts/exynos5250-snow.dts  | 31 +++++++++++++++++++++++++++++++
>>>  2 files changed, 35 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
>>> index 46c0980..f7cc835 100644
>>> --- a/arch/arm/boot/dts/cros5250-common.dtsi
>>> +++ b/arch/arm/boot/dts/cros5250-common.dtsi
>>> @@ -167,6 +167,10 @@
>>>                 status = "disabled";
>>>         };
>>>
>>> +       adc@12D10000 {
>>> +               vdd-supply = <&buck5_reg>;
>>> +       };
>>> +
>>>         hdmi {
>>>                 hpd-gpio = <&gpx3 7 0xf 1 3>;
>>>         };
>>> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
>>> index 17dd951..b78da7c 100644
>>> --- a/arch/arm/boot/dts/exynos5250-snow.dts
>>> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
>>> @@ -40,4 +40,35 @@
>>>                                 <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
>>>                 };
>>>         };
>>> +
>>> +       adc@12D10000 {
>>> +               ncp15wb473@3 {
>>> +                       compatible = "ntc,ncp15wb473";
>>> +                       pullup-uv = <1800000>;
>>> +                       pullup-ohm = <47000>;
>>> +                       pulldown-ohm = <0>;
>>> +                       io-channels = <&adc 3>;
>>> +               };
>>> +               ncp15wb473@4 {
>>> +                       compatible = "ntc,ncp15wb473";
>>> +                       pullup-uv = <1800000>;
>>> +                       pullup-ohm = <47000>;
>>> +                       pulldown-ohm = <0>;
>>> +                       io-channels = <&adc 4>;
>>> +               };
>>> +               ncp15wb473@5 {
>>> +                       compatible = "ntc,ncp15wb473";
>>> +                       pullup-uv = <1800000>;
>>> +                       pullup-ohm = <47000>;
>>> +                       pulldown-ohm = <0>;
>>> +                       io-channels = <&adc 5>;
>>> +               };
>>> +               ncp15wb473@6 {
>>> +                       compatible = "ntc,ncp15wb473";
>>> +                       pullup-uv = <1800000>;
>>> +                       pullup-ohm = <47000>;
>>> +                       pulldown-ohm = <0>;
>>> +                       io-channels = <&adc 6>;
>>> +               };
>>> +       };
>>>  };
>> Thanks for the upload, i've tested with a similar changes.
>>> --
>>> 1.8.1.3
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>> Please read the FAQ at  http://www.tux.org/lkml/
>>
>>
>>
>> --
>> Shine bright,
>> (: Nav :)
>
>
>
> --
> Shine bright,
> (: Nav :)



--
Shine bright,
(: Nav :)

      reply index

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-12 23:13 [PATCH 0/4] Get exynos adc driver running on on exynos5250-snow Doug Anderson
2013-03-12 23:13 ` [PATCH 1/4] iio: adc: Document the regulator/clocks for exynos-adc Doug Anderson
2013-03-12 23:13 ` [PATCH 2/4] iio: adc: Add dt support for turning on the phy in exynos-adc Doug Anderson
2013-03-12 23:13 ` [PATCH 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson
2013-03-12 23:13 ` [PATCH 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson
2013-03-13 20:39 ` [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work Doug Anderson
2013-03-13 20:39   ` [PATCH v2 1/4] iio: adc: Document the regulator/clocks for exynos-adc Doug Anderson
2013-03-15  8:05     ` Naveen Krishna Ch
2013-03-27 18:35     ` Naveen Krishna Ch
2013-03-27 18:40       ` Lars-Peter Clausen
2013-03-27 18:46         ` Doug Anderson
2013-03-28  6:31           ` Jonathan Cameron
2013-03-29  9:36           ` Jonathan Cameron
2013-03-13 20:40   ` [PATCH v2 2/4] iio: adc: Add dt support for turning on the phy in exynos-adc Doug Anderson
2013-03-15 11:45     ` Naveen Krishna Ch
2013-03-15 15:43       ` Naveen Krishna Ch
2013-03-27 18:37     ` Naveen Krishna Ch
2013-03-27 18:44       ` Doug Anderson
2013-03-13 20:40   ` [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson
2013-03-15 15:45     ` Naveen Krishna Ch
2013-03-13 20:40   ` [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson
2013-03-15 10:24     ` Naveen Krishna Ch
2013-03-15 15:42       ` Naveen Krishna Ch
2013-03-27 18:36         ` Naveen Krishna Ch [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHfPSqCNvX6PhWPYOh8whjV=TmOwy5B7FX0QAno_cfghYGx5_w@mail.gmail.com' \
    --to=naveenkrishna.ch@gmail.com \
    --cc=ch.naveen@samsung.com \
    --cc=dianders@chromium.org \
    --cc=jic23@kernel.org \
    --cc=kgene.kim@samsung.com \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linux@roeck-us.net \
    --cc=olof@lixom.net \
    --cc=rahul.sharma@samsung.com \
    --cc=thomas.abraham@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git