linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Torvalds <torvalds@linux-foundation.org>
To: Vlastimil Babka <vbabka@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>,
	Mike Rapoport <rppt@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Ingo Molnar <mingo@kernel.org>,
	Masami Hiramatsu <mhiramat@kernel.org>,
	Linux-MM <linux-mm@kvack.org>
Subject: Re: [GIT PULL] tracing: Fixes to bootconfig memory management
Date: Tue, 14 Sep 2021 16:29:27 -0700	[thread overview]
Message-ID: <CAHk-=wimTmUcYC_BPvwv-48OFwpzJhzrX-_9afk--ND6en81Xg@mail.gmail.com> (raw)
In-Reply-To: <4392e867-0cce-d04a-e3d1-cba152daaa1f@suse.cz>

On Tue, Sep 14, 2021 at 3:48 PM Vlastimil Babka <vbabka@suse.cz> wrote:
>
> Well, looks like I can't. Commit 77e02cf57b6cf does boot fine for me,
> multiple times. But so now does the parent commit 6a4746ba06191. Looks like
> the magic is gone. I'm now surprised how deterministic it was during the
> bisect (most bad cases manifested on first boot, only few at second).

Well, your report was clearly memory corruption by the invalid
memblock_free() just ending up causing random problems later on.

So it could easily be 100% deterministic with a certain memory layout
at a particular commit. And then enough other changes later, and it's
all gone, because the memory corruption now hits something else that
didn't even care.

The code for your oops was

   0: 48 8b 17              mov    (%rdi),%rdx
   3: 48 39 d7              cmp    %rdx,%rdi
   6: 74 43                je     0x4b
   8: 48 8b 47 08          mov    0x8(%rdi),%rax
   c: 48 85 c0              test   %rax,%rax
   f: 74 23                je     0x34
  11: 49 89 c0              mov    %rax,%r8
  14:* 48 8b 40 10          mov    0x10(%rax),%rax <-- trapping instruction

and that's the start of rb_next(), so what's going on is that
"rb->rb_right" (the second word of 'struct rb_node') ends up having
that value in %rax:

  RAX: 343479726f6d656d

which is ASCII "44yromem" rather than a valid pointer if I looked that up right.

And just _slightly_ different allocation patterns, and your 'struct
rb_node' gets allocated somewhere else, and you don't see the oops at
all, or you get it later in some different place.

Most memory corruption doesn't cause oopses, because most memory isn't
used as pointers etc.

What you _could_ try if you care enough is

 - go back to the thing you bisectted to where you can still hopefully
recreate the problem

 - apply that patch at that point with no other changes

and then the test would hopefully be closer to the state you could
re-create the problem.

And hopefully it would still not reproduce, just because the bug is
fixed, of course ;)

The very unlikely alternative is that your bisect was just pure random
bad luck and hit the wrong commit entirely, and the oops was due to
some other problem.

But it does seem unlikely to be something else. Usually when bisects
go off into the weeds due to not being reproducible, they go very
obviously off into the weeds rather than point to something that ends
up having a very similar bug.

           Linus

  reply	other threads:[~2021-09-14 23:29 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-14 14:56 [GIT PULL] tracing: Fixes to bootconfig memory management Steven Rostedt
2021-09-14 18:01 ` Linus Torvalds
2021-09-14 18:59   ` Steven Rostedt
2021-09-14 19:05     ` Linus Torvalds
2021-09-14 19:14       ` Steven Rostedt
2021-09-14 19:23       ` Linus Torvalds
2021-09-14 19:38         ` Linus Torvalds
2021-09-14 20:48           ` Linus Torvalds
2021-09-14 21:05             ` Steven Rostedt
2021-09-14 22:47               ` Vlastimil Babka
2021-09-14 23:29                 ` Linus Torvalds [this message]
2021-09-15  9:28                   ` Vlastimil Babka
2021-09-14 23:44               ` Masami Hiramatsu
2021-09-17 20:10   ` Mike Rapoport

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHk-=wimTmUcYC_BPvwv-48OFwpzJhzrX-_9afk--ND6en81Xg@mail.gmail.com' \
    --to=torvalds@linux-foundation.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhiramat@kernel.org \
    --cc=mingo@kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=rppt@kernel.org \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).