From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Oleg Keri <ezhi99@gmail.com>
Cc: Ike Panhc <ike.pan@canonical.com>,
Darren Hart <dvhart@infradead.org>,
Andy Shevchenko <andy@infradead.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Platform Driver <platform-driver-x86@vger.kernel.org>
Subject: Re: [PATCH v2] platform/x86: ideapad-laptop: Add fn-lock setting
Date: Tue, 22 May 2018 12:28:14 +0300 [thread overview]
Message-ID: <CAHp75Vc++CPqQza43tsy2QYbC4rkJb5c+9tX0+KLFP08c7-6uA@mail.gmail.com> (raw)
In-Reply-To: <20180513160507.9136-1-ezhi99@gmail.com>
On Sun, May 13, 2018 at 7:05 PM, Oleg Keri <ezhi99@gmail.com> wrote:
> Some of latest Lenovo ideapad laptops do not have UEFI/BIOS setting for
> switching fn-lock mode. This commit adds related acpi calls to ideapad
> platform driver. However setting is available via sysfs.
>
Pushed to my review and testing queue, thanks!
> Signed-off-by: Oleg Keri <ezhi99@gmail.com>
> ---
> .../ABI/testing/sysfs-platform-ideapad-laptop | 13 +++++
> drivers/platform/x86/ideapad-laptop.c | 52 +++++++++++++++++--
> 2 files changed, 62 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
> index 597a2f3d..bc1e712d 100644
> --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
> +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
> @@ -25,3 +25,16 @@ Description:
> Control touchpad mode.
> * 1 -> Switched On
> * 0 -> Switched Off
> +
> +What: /sys/bus/pci/devices/<bdf>/<device>/VPC2004:00/fn_lock
> +Date: May 2018
> +KernelVersion: 4.17
> +Contact: "Oleg Keri <ezhi99@gmail.com>"
> +Description:
> + Control fn-lock mode.
> + * 1 -> Switched On
> + * 0 -> Switched Off
> +
> + For example:
> + # echo "0" > \
> + /sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock
> diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
> index 535199c9..2f4991fb 100644
> --- a/drivers/platform/x86/ideapad-laptop.c
> +++ b/drivers/platform/x86/ideapad-laptop.c
> @@ -43,6 +43,7 @@
> #define IDEAPAD_RFKILL_DEV_NUM (3)
>
> #define BM_CONSERVATION_BIT (5)
> +#define HA_FNLOCK_BIT (10)
>
> #define CFG_BT_BIT (16)
> #define CFG_3G_BIT (17)
> @@ -59,6 +60,8 @@ static const char *const ideapad_wmi_fnesc_events[] = {
> enum {
> BMCMD_CONSERVATION_ON = 3,
> BMCMD_CONSERVATION_OFF = 5,
> + HACMD_FNLOCK_ON = 0xe,
> + HACMD_FNLOCK_OFF = 0xf,
> };
>
> enum {
> @@ -139,11 +142,11 @@ static int method_gbmd(acpi_handle handle, unsigned long *ret)
> return result;
> }
>
> -static int method_sbmc(acpi_handle handle, int cmd)
> +static int method_int1(acpi_handle handle, char *method, int cmd)
> {
> acpi_status status;
>
> - status = acpi_execute_simple_method(handle, "SBMC", cmd);
> + status = acpi_execute_simple_method(handle, method, cmd);
> return ACPI_FAILURE(status) ? -1 : 0;
> }
>
> @@ -487,7 +490,7 @@ static ssize_t conservation_mode_store(struct device *dev,
> if (ret)
> return ret;
>
> - ret = method_sbmc(priv->adev->handle, state ?
> + ret = method_int1(priv->adev->handle, "SBMC", state ?
> BMCMD_CONSERVATION_ON :
> BMCMD_CONSERVATION_OFF);
> if (ret < 0)
> @@ -497,11 +500,51 @@ static ssize_t conservation_mode_store(struct device *dev,
>
> static DEVICE_ATTR_RW(conservation_mode);
>
> +static ssize_t fn_lock_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct ideapad_private *priv = dev_get_drvdata(dev);
> + unsigned long result;
> + int hals;
> + int fail = read_method_int(priv->adev->handle, "HALS", &hals);
> +
> + if (fail)
> + return sprintf(buf, "-1\n");
> +
> + result = hals;
> + return sprintf(buf, "%u\n", test_bit(HA_FNLOCK_BIT, &result));
> +}
> +
> +static ssize_t fn_lock_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct ideapad_private *priv = dev_get_drvdata(dev);
> + bool state;
> + int ret;
> +
> + ret = kstrtobool(buf, &state);
> + if (ret)
> + return ret;
> +
> + ret = method_int1(priv->adev->handle, "SALS", state ?
> + HACMD_FNLOCK_ON :
> + HACMD_FNLOCK_OFF);
> + if (ret < 0)
> + return -EIO;
> + return count;
> +}
> +
> +static DEVICE_ATTR_RW(fn_lock);
> +
> +
> static struct attribute *ideapad_attributes[] = {
> &dev_attr_camera_power.attr,
> &dev_attr_fan_mode.attr,
> &dev_attr_touchpad.attr,
> &dev_attr_conservation_mode.attr,
> + &dev_attr_fn_lock.attr,
> NULL
> };
>
> @@ -522,6 +565,9 @@ static umode_t ideapad_is_visible(struct kobject *kobj,
> } else if (attr == &dev_attr_conservation_mode.attr) {
> supported = acpi_has_method(priv->adev->handle, "GBMD") &&
> acpi_has_method(priv->adev->handle, "SBMC");
> + } else if (attr == &dev_attr_fn_lock.attr) {
> + supported = acpi_has_method(priv->adev->handle, "HALS") &&
> + acpi_has_method(priv->adev->handle, "SALS");
> } else
> supported = true;
>
> --
> 2.17.0
>
--
With Best Regards,
Andy Shevchenko
prev parent reply other threads:[~2018-05-22 9:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-09 18:16 [PATCH] platform/x86: ideapad-laptop: Add fn-lock setting Some of latest Lenovo ideapad laptops do not have UEFI/BIOS setting for switching fn-lock mode. This commit adds related acpi calls to ideapad platfrom driver. However setting is available via sysfs Oleg Keri
2018-05-11 9:41 ` Andy Shevchenko
2018-05-13 16:05 ` [PATCH v2] platform/x86: ideapad-laptop: Add fn-lock setting Oleg Keri
2018-05-22 9:28 ` Andy Shevchenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHp75Vc++CPqQza43tsy2QYbC4rkJb5c+9tX0+KLFP08c7-6uA@mail.gmail.com \
--to=andy.shevchenko@gmail.com \
--cc=andy@infradead.org \
--cc=dvhart@infradead.org \
--cc=ezhi99@gmail.com \
--cc=ike.pan@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).