linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Henning Schild <henning.schild@siemens.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux LED Subsystem <linux-leds@vger.kernel.org>,
	Platform Driver <platform-driver-x86@vger.kernel.org>,
	linux-watchdog@vger.kernel.org,
	Srikanth Krishnakar <skrishnakar@gmail.com>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Gerd Haeussler <gerd.haeussler.ext@siemens.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Mark Gross <mgross@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>, Pavel Machek <pavel@ucw.cz>
Subject: Re: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
Date: Mon, 15 Mar 2021 12:48:19 +0200	[thread overview]
Message-ID: <CAHp75VcBdR8xqfWqKe+DwGAUYByVL7SBK0p7tHcKPs7m4Ay1iw@mail.gmail.com> (raw)
In-Reply-To: <20210315095710.7140-3-henning.schild@siemens.com>

On Mon, Mar 15, 2021 at 11:57 AM Henning Schild
<henning.schild@siemens.com> wrote:
>
> This driver adds initial support for several devices from Siemens. It is
> based on a platform driver introduced in an earlier commit.

...

> +struct simatic_ipc_led {
> +       unsigned int value; /* mask for io and offset for mem */

> +       char name[32];

Hmm... Dunno if LED framework defines its own constraints for the
length of the name.

> +       struct led_classdev cdev;
> +};
> +
> +static struct simatic_ipc_led simatic_ipc_leds_io[] = {
> +       {1 << 15, "simatic-ipc:green:" LED_FUNCTION_STATUS "-1" },
> +       {1 << 7,  "simatic-ipc:yellow:" LED_FUNCTION_STATUS "-1" },
> +       {1 << 14, "simatic-ipc:red:" LED_FUNCTION_STATUS "-2" },
> +       {1 << 6,  "simatic-ipc:yellow:" LED_FUNCTION_STATUS "-2" },
> +       {1 << 13, "simatic-ipc:red:" LED_FUNCTION_STATUS "-3" },
> +       {1 << 5,  "simatic-ipc:yellow:" LED_FUNCTION_STATUS "-3" },

Can you use BIT() macro here? And can it be sorted by the bit order?

> +       {0, ""},

{ } is enough (no comma for terminator lines in general, and no need
to show structure member assignments separately in particular).

> +};
> +
> +/* the actual start will be discovered with pci, 0 is a placeholder */

PCI

> +struct resource simatic_ipc_led_mem_res =
> +       DEFINE_RES_MEM_NAMED(0, SZ_4K, KBUILD_MODNAME);

One line?

...

> +static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
> +       {0x500 + 0x1A0, "simatic-ipc:red:" LED_FUNCTION_STATUS "-1"},
> +       {0x500 + 0x1A8, "simatic-ipc:green:" LED_FUNCTION_STATUS "-1"},
> +       {0x500 + 0x1C8, "simatic-ipc:red:" LED_FUNCTION_STATUS "-2"},
> +       {0x500 + 0x1D0, "simatic-ipc:green:" LED_FUNCTION_STATUS "-2"},
> +       {0x500 + 0x1E0, "simatic-ipc:red:" LED_FUNCTION_STATUS "-3"},
> +       {0x500 + 0x198, "simatic-ipc:green:" LED_FUNCTION_STATUS "-3"},
> +       {0, ""},

As per above.

> +};

...

> +       struct simatic_ipc_led *led =
> +               container_of(led_cd, struct simatic_ipc_led, cdev);

One line?

...

> +       struct simatic_ipc_led *led =
> +               container_of(led_cd, struct simatic_ipc_led, cdev);

One line?

...

> +       struct simatic_ipc_led *led =
> +               container_of(led_cd, struct simatic_ipc_led, cdev);

Ditto.


Btw, usually for such cases we create an inline helper
... to_simatic_ipc_led(...)
{
  return container_of(...);
}

...

> +static int simatic_ipc_leds_probe(struct platform_device *pdev)
> +{
> +       struct simatic_ipc_platform *plat;

const?

> +       struct device *dev = &pdev->dev;
> +       struct simatic_ipc_led *ipcled;
> +       struct led_classdev *cdev;
> +       struct resource *res;
> +       int err, type;
> +       u32 *p;

> +       plat = pdev->dev.platform_data;

Can be done directly in the definition block.

> +       switch (plat->devmode) {
> +       case SIMATIC_IPC_DEVICE_227D:
> +       case SIMATIC_IPC_DEVICE_427E:
> +               res = &simatic_ipc_led_io_res;
> +               ipcled = simatic_ipc_leds_io;
> +               /* the 227D is high on while 427E is low on, invert the struct
> +                * we have
> +                */
> +               if (plat->devmode == SIMATIC_IPC_DEVICE_227D) {

> +                       while (ipcled->value) {
> +                               ipcled->value = swab16(ipcled->value);
> +                               ipcled++;
> +                       }

This seems fishy. If you have a BE CPU it won't work the same way.
Better:
 a) to use cpu_to_le16 / be16
 b) create this as a helper that we may move to the generic header of byteorder.

But looking at the use of it, perhaps you rather need to redefine IO
accessors, i.e. ioread16()/iowrite16() vs. ioread16be()/iowrite16be().

> +                       ipcled = simatic_ipc_leds_io;
> +               }
> +               type = IORESOURCE_IO;
> +               if (!devm_request_region(dev, res->start,
> +                                        resource_size(res),
> +                                        KBUILD_MODNAME)) {
> +                       dev_err(dev,
> +                               "Unable to register IO resource at %pR\n",
> +                               res);
> +                       return -EBUSY;
> +               }
> +               break;
> +       case SIMATIC_IPC_DEVICE_127E:
> +               res = &simatic_ipc_led_mem_res;
> +               ipcled = simatic_ipc_leds_mem;
> +               type = IORESOURCE_MEM;
> +
> +               /* get GPIO base from PCI */
> +               res->start = simatic_ipc_get_membase0(PCI_DEVFN(13, 0));
> +               if (res->start == 0)
> +                       return -ENODEV;
> +
> +               /* do the final address calculation */
> +               res->start = res->start + (0xC5 << 16);

Magic. As I told you this is an actual offseet in the P2SB's bar for
GPIO registers.
I have a question, why we can't provide a GPIO driver which is already
in the kernel and, with use of the patch series I sent, to convert
this all magic to GPIO LEDs as it's done for all normal cases?

> +               res->end += res->start;
> +
> +               simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
> +               if (IS_ERR(simatic_ipc_led_memory))
> +                       return PTR_ERR(simatic_ipc_led_memory);
> +
> +               /* initialize power/watchdog LED */
> +               p = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */
> +               *p = (*p & ~1);
> +               p = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */
> +               *p = (*p | 1);
> +
> +               break;
> +       default:
> +               return -ENODEV;
> +       }

> +}

-- 
With Best Regards,
Andy Shevchenko

  reply	other threads:[~2021-03-15 10:49 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15  9:57 [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Henning Schild
2021-03-15  9:57 ` [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices Henning Schild
2021-03-15 10:31   ` Andy Shevchenko
2021-03-15 16:30     ` Henning Schild
2021-03-17 19:13     ` Henning Schild
2021-03-17 20:03       ` Hans de Goede
2021-03-18 11:30         ` Enrico Weigelt, metux IT consult
2021-03-18 11:45           ` Hans de Goede
2021-03-26  9:55             ` Henning Schild
2021-03-26 12:21               ` Hans de Goede
2021-03-15  9:57 ` [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs Henning Schild
2021-03-15 10:48   ` Andy Shevchenko [this message]
2021-03-15 11:19     ` Pavel Machek
2021-03-15 11:26       ` Andy Shevchenko
2021-03-15 12:40       ` Henning Schild
2021-03-18 11:38       ` Enrico Weigelt, metux IT consult
2021-03-27  9:46         ` Henning Schild
2021-04-01 16:20           ` Enrico Weigelt, metux IT consult
2021-03-27  9:56       ` Henning Schild
2021-03-18 10:27     ` Enrico Weigelt, metux IT consult
2021-03-18 12:40       ` Alexander Dahl
2021-03-23 17:45         ` Henning Schild
2021-03-26 16:33     ` Henning Schild
2021-03-18 10:25   ` Enrico Weigelt, metux IT consult
2021-03-27 11:16     ` Henning Schild
2021-03-27 11:41       ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs Henning Schild
2021-03-15 15:10   ` Guenter Roeck
2021-03-29 16:28     ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs Henning Schild
2021-03-15 10:14   ` Henning Schild
2021-03-15 10:19     ` Hans de Goede
2021-03-15 12:09       ` Henning Schild
2021-03-15 14:58       ` [PATCH] platform/x86: pmc_atom: use callback for all dmi quirk entries Henning Schild
2021-03-15 16:31         ` Hans de Goede
2021-03-15 17:00           ` Henning Schild
2021-03-15 18:01             ` Hans de Goede
2021-03-16  5:47               ` Henning Schild
2021-03-16  9:43                 ` Hans de Goede
2021-03-15 13:25   ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs kernel test robot
2021-03-15 10:55 ` [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Andy Shevchenko
2021-03-15 16:08   ` Henning Schild
2021-08-02  9:21   ` Henning Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHp75VcBdR8xqfWqKe+DwGAUYByVL7SBK0p7tHcKPs7m4Ay1iw@mail.gmail.com \
    --to=andy.shevchenko@gmail.com \
    --cc=gerd.haeussler.ext@siemens.com \
    --cc=hdegoede@redhat.com \
    --cc=henning.schild@siemens.com \
    --cc=jan.kiszka@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mgross@linux.intel.com \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=skrishnakar@gmail.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).