linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Gayatri Kammela <gayatri.kammela@intel.com>
Cc: Platform Driver <platform-driver-x86@vger.kernel.org>,
	Mark Gross <mgross@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	You-Sheng Yang <vicamo.yang@canonical.com>,
	"Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>,
	"Box, David E" <david.e.box@intel.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Tamar Mashiah <tamar.mashiah@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rajat Jain <rajatja@google.com>
Subject: Re: [PATCH v2 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder
Date: Thu, 8 Jul 2021 10:56:15 +0300	[thread overview]
Message-ID: <CAHp75VdFpJBEWBJMJexK3muvWt+EEqMMyVtxMvm9sSXhkysaww@mail.gmail.com> (raw)
In-Reply-To: <ffbbbc22605014d0de6eabaf7f1441a761456cb2.1625709047.git.gayatri.kammela@intel.com>

On Thu, Jul 8, 2021 at 5:10 AM Gayatri Kammela
<gayatri.kammela@intel.com> wrote:
>
> As part of collecting Intel x86 specific drivers in their own
> folder, move intel_pmc_core* files to its own subfolder there.

I'm fine with this, it is also possible I think to drop intel_pmc_
prefix from the file names (core.c, core.h, pltdrv.c). In any case it
may be done later on.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
> Cc: David Box <david.e.box@intel.com>
> Cc: You-Sheng Yang <vicamo.yang@canonical.com>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
> ---
>  drivers/platform/x86/Kconfig                  | 21 ------------------
>  drivers/platform/x86/Makefile                 |  1 -
>  drivers/platform/x86/intel/Kconfig            |  1 +
>  drivers/platform/x86/intel/Makefile           |  1 +
>  drivers/platform/x86/intel/pmc/Kconfig        | 22 +++++++++++++++++++
>  drivers/platform/x86/intel/pmc/Makefile       |  5 +++++
>  .../x86/{ => intel/pmc}/intel_pmc_core.c      |  0
>  .../x86/{ => intel/pmc}/intel_pmc_core.h      |  0
>  .../{ => intel/pmc}/intel_pmc_core_pltdrv.c   |  0
>  9 files changed, 29 insertions(+), 22 deletions(-)
>  create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
>  create mode 100644 drivers/platform/x86/intel/pmc/Makefile
>  rename drivers/platform/x86/{ => intel/pmc}/intel_pmc_core.c (100%)
>  rename drivers/platform/x86/{ => intel/pmc}/intel_pmc_core.h (100%)
>  rename drivers/platform/x86/{ => intel/pmc}/intel_pmc_core_pltdrv.c (100%)
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 7d385c3b2239..cae72922f448 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
>           To compile this driver as a module, choose M here: the module
>           will be called intel_mrfld_pwrbtn.
>
> -config INTEL_PMC_CORE
> -       tristate "Intel PMC Core driver"
> -       depends on PCI
> -       depends on ACPI
> -       help
> -         The Intel Platform Controller Hub for Intel Core SoCs provides access
> -         to Power Management Controller registers via various interfaces. This
> -         driver can utilize debugging capabilities and supported features as
> -         exposed by the Power Management Controller. It also may perform some
> -         tasks in the PMC in order to enable transition into the SLPS0 state.
> -         It should be selected on all Intel platforms supported by the driver.
> -
> -         Supported features:
> -               - SLP_S0_RESIDENCY counter
> -               - PCH IP Power Gating status
> -               - LTR Ignore / LTR Show
> -               - MPHY/PLL gating status (Sunrisepoint PCH only)
> -               - SLPS0 Debug registers (Cannonlake/Icelake PCH)
> -               - Low Power Mode registers (Tigerlake and beyond)
> -               - PMC quirks as needed to enable SLPS0/S0ix
> -
>  config INTEL_PMT_CLASS
>         tristate
>         help
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 7ee369aab10d..43d36f8c36f1 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)             += intel-uncore-frequency.o
>  obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)     += intel_bxtwc_tmu.o
>  obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)    += intel_chtdc_ti_pwrbtn.o
>  obj-$(CONFIG_INTEL_MRFLD_PWRBTN)       += intel_mrfld_pwrbtn.o
> -obj-$(CONFIG_INTEL_PMC_CORE)           += intel_pmc_core.o intel_pmc_core_pltdrv.o
>  obj-$(CONFIG_INTEL_PMT_CLASS)          += intel_pmt_class.o
>  obj-$(CONFIG_INTEL_PMT_TELEMETRY)      += intel_pmt_telemetry.o
>  obj-$(CONFIG_INTEL_PMT_CRASHLOG)       += intel_pmt_crashlog.o
> diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
> index f2eef337eb98..8ca021785f67 100644
> --- a/drivers/platform/x86/intel/Kconfig
> +++ b/drivers/platform/x86/intel/Kconfig
> @@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
>
>  source "drivers/platform/x86/intel/int33fe/Kconfig"
>  source "drivers/platform/x86/intel/int3472/Kconfig"
> +source "drivers/platform/x86/intel/pmc/Kconfig"
>
>  endif # X86_PLATFORM_DRIVERS_INTEL
> diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
> index 0653055942d5..49962f4dfdec 100644
> --- a/drivers/platform/x86/intel/Makefile
> +++ b/drivers/platform/x86/intel/Makefile
> @@ -6,3 +6,4 @@
>
>  obj-$(CONFIG_INTEL_CHT_INT33FE)                += int33fe/
>  obj-$(CONFIG_INTEL_SKL_INT3472)                += int3472/
> +obj-$(CONFIG_INTEL_PMC_CORE)           += pmc/
> diff --git a/drivers/platform/x86/intel/pmc/Kconfig b/drivers/platform/x86/intel/pmc/Kconfig
> new file mode 100644
> index 000000000000..b4c955a35674
> --- /dev/null
> +++ b/drivers/platform/x86/intel/pmc/Kconfig
> @@ -0,0 +1,22 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config INTEL_PMC_CORE
> +       tristate "Intel PMC Core driver"
> +       depends on PCI
> +       depends on ACPI
> +       help
> +         The Intel Platform Controller Hub for Intel Core SoCs provides access
> +         to Power Management Controller registers via various interfaces. This
> +         driver can utilize debugging capabilities and supported features as
> +         exposed by the Power Management Controller. It also may perform some
> +         tasks in the PMC in order to enable transition into the SLPS0 state.
> +         It should be selected on all Intel platforms supported by the driver.
> +
> +         Supported features:
> +               - SLP_S0_RESIDENCY counter
> +               - PCH IP Power Gating status
> +               - LTR Ignore / LTR Show
> +               - MPHY/PLL gating status (Sunrisepoint PCH only)
> +               - SLPS0 Debug registers (Cannonlake/Icelake PCH)
> +               - Low Power Mode registers (Tigerlake and beyond)
> +               - PMC quirks as needed to enable SLPS0/S0ix
> diff --git a/drivers/platform/x86/intel/pmc/Makefile b/drivers/platform/x86/intel/pmc/Makefile
> new file mode 100644
> index 000000000000..633a7598d6d6
> --- /dev/null
> +++ b/drivers/platform/x86/intel/pmc/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +
> +obj-$(CONFIG_INTEL_PMC_CORE)   += intel_pmc_core.o
> +obj-$(CONFIG_INTEL_PMC_CORE)   += intel_pmc_core_pltdrv.o
> diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel/pmc/intel_pmc_core.c
> similarity index 100%
> rename from drivers/platform/x86/intel_pmc_core.c
> rename to drivers/platform/x86/intel/pmc/intel_pmc_core.c
> diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel/pmc/intel_pmc_core.h
> similarity index 100%
> rename from drivers/platform/x86/intel_pmc_core.h
> rename to drivers/platform/x86/intel/pmc/intel_pmc_core.h
> diff --git a/drivers/platform/x86/intel_pmc_core_pltdrv.c b/drivers/platform/x86/intel/pmc/intel_pmc_core_pltdrv.c
> similarity index 100%
> rename from drivers/platform/x86/intel_pmc_core_pltdrv.c
> rename to drivers/platform/x86/intel/pmc/intel_pmc_core_pltdrv.c
> --
> 2.25.1
>


-- 
With Best Regards,
Andy Shevchenko

  reply	other threads:[~2021-07-08  7:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-08  2:07 [PATCH v2 0/5] Add Alder Lake PCH-S support to PMC core driver Gayatri Kammela
2021-07-08  2:07 ` [PATCH v2 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder Gayatri Kammela
2021-07-08  7:56   ` Andy Shevchenko [this message]
2021-07-09 17:39     ` Kammela, Gayatri
2021-07-08  2:07 ` [PATCH v2 2/5] platform/x86/intel: intel_pmc_core: Add Alderlake support to pmc_core driver Gayatri Kammela
2021-07-08  2:07 ` [PATCH v2 3/5] platform/x86/intel: intel_pmc_core: Add Latency Tolerance Reporting (LTR) support to Alder Lake Gayatri Kammela
2021-07-08  2:07 ` [PATCH v2 4/5] platform/x86/intel: intel_pmc_core: Add Alder Lake low power mode support for pmc_core Gayatri Kammela
2021-07-08  2:07 ` [PATCH v2 5/5] platform/x86/intel: intel_pmc_core: Add GBE Package C10 fix for Alder Lake PCH Gayatri Kammela
2021-07-08 17:32 ` [PATCH v2 0/5] Add Alder Lake PCH-S support to PMC core driver Rajneesh Bhardwaj
2021-07-09 17:40   ` Kammela, Gayatri
2021-07-09 18:30     ` Limonciello, Mario
2021-07-09 23:01       ` Kammela, Gayatri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHp75VdFpJBEWBJMJexK3muvWt+EEqMMyVtxMvm9sSXhkysaww@mail.gmail.com \
    --to=andy.shevchenko@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=david.e.box@intel.com \
    --cc=gayatri.kammela@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=irenic.rajneesh@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mgross@linux.intel.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rajatja@google.com \
    --cc=srinivas.pandruvada@intel.com \
    --cc=tamar.mashiah@intel.com \
    --cc=vicamo.yang@canonical.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).