From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: Sebastian Gottschall <s.gottschall@newmedia-net.de>
Cc: Ryder Lee <ryder.lee@mediatek.com>, Felix Fietkau <nbd@nbd.name>,
Roy Luo <royluo@google.com>, YF Luo <yf.luo@mediatek.com>,
Yiwei Chung <yiwei.chung@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>,
Chih-Min Chen <chih-min.Chen@mediatek.com>,
linux-wireless <linux-wireless@vger.kernel.org>,
linux-mediatek@lists.infradead.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
Date: Thu, 6 Jun 2019 18:19:37 +0200 [thread overview]
Message-ID: <CAJ0CqmVBogQrqf4Gckr5gQ6tCrdZG=p60ZiC+-WW-yxt93+40Q@mail.gmail.com> (raw)
In-Reply-To: <ade7ef01-8b06-ec7d-4caf-e581f4033819@newmedia-net.de>
>
> i tested your patch against a qca 9984 chipset using SAE and without
> encryption. both did not work. the devices are connecting, but no data
> connection is possible
Hi Sebastian,
I tested Ryder's patch using mt76x2 as mesh peer and it works fine for me.
Could you please provide some more info?
Regards,
Lorenzo
>
>
> Sebastian
>
> Am 03.06.2019 um 08:08 schrieb Ryder Lee:
> > Enable NL80211_IFTYPE_MESH_POINT and update its path.
> >
> > Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> > ---
> > Changes since v3 - fix a wrong expression
> > Changes since v2 - remove unused definitions
> > ---
> > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
> > drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
> > drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 4 +++-
> > drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 ------
> > 4 files changed, 10 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
> > index 59f604f3161f..f860af6a42da 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
> > @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = {
> > {
> > .max = MT7615_MAX_INTERFACES,
> > .types = BIT(NL80211_IFTYPE_AP) |
> > +#ifdef CONFIG_MAC80211_MESH
> > + BIT(NL80211_IFTYPE_MESH_POINT) |
> > +#endif
> > BIT(NL80211_IFTYPE_STATION)
> > }
> > };
> > @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev)
> > dev->mt76.antenna_mask = 0xf;
> >
> > wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
> > +#ifdef CONFIG_MAC80211_MESH
> > + BIT(NL80211_IFTYPE_MESH_POINT) |
> > +#endif
> > BIT(NL80211_IFTYPE_AP);
> >
> > ret = mt76_register_device(&dev->mt76, true, mt7615_rates,
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > index b0bb7cc12385..585e67fa2728 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
> >
> > switch (type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > /* ap use hw bssid 0 and ext bssid */
> > if (~mask & BIT(HW_BSSID_0))
> > return HW_BSSID_0;
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > index 43f70195244c..e82297048449 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
> >
> > switch (vif->type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > tx_wlan_idx = mvif->sta.wcid.idx;
> > conn_type = CONNECTION_INFRA_AP;
> > break;
> > @@ -968,7 +969,7 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> > .rx_wtbl = {
> > .tag = cpu_to_le16(WTBL_RX),
> > .len = cpu_to_le16(sizeof(struct wtbl_rx)),
> > - .rca1 = vif->type != NL80211_IFTYPE_AP,
> > + .rca1 = vif->type == NL80211_IFTYPE_STATION,
> > .rca2 = 1,
> > .rv = 1,
> > },
> > @@ -1042,6 +1043,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
> > {
> > switch (type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > if (conn_type)
> > *conn_type = CONNECTION_INFRA_STA;
> > break;
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
> > index e96efb13fa4d..0915cb735699 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
> > @@ -105,25 +105,19 @@ enum {
> > #define STA_TYPE_STA BIT(0)
> > #define STA_TYPE_AP BIT(1)
> > #define STA_TYPE_ADHOC BIT(2)
> > -#define STA_TYPE_TDLS BIT(3)
> > #define STA_TYPE_WDS BIT(4)
> > #define STA_TYPE_BC BIT(5)
> >
> > #define NETWORK_INFRA BIT(16)
> > #define NETWORK_P2P BIT(17)
> > #define NETWORK_IBSS BIT(18)
> > -#define NETWORK_MESH BIT(19)
> > -#define NETWORK_BOW BIT(20)
> > #define NETWORK_WDS BIT(21)
> >
> > #define CONNECTION_INFRA_STA (STA_TYPE_STA | NETWORK_INFRA)
> > #define CONNECTION_INFRA_AP (STA_TYPE_AP | NETWORK_INFRA)
> > #define CONNECTION_P2P_GC (STA_TYPE_STA | NETWORK_P2P)
> > #define CONNECTION_P2P_GO (STA_TYPE_AP | NETWORK_P2P)
> > -#define CONNECTION_MESH_STA (STA_TYPE_STA | NETWORK_MESH)
> > -#define CONNECTION_MESH_AP (STA_TYPE_AP | NETWORK_MESH)
> > #define CONNECTION_IBSS_ADHOC (STA_TYPE_ADHOC | NETWORK_IBSS)
> > -#define CONNECTION_TDLS (STA_TYPE_STA | NETWORK_INFRA | STA_TYPE_TDLS)
> > #define CONNECTION_WDS (STA_TYPE_WDS | NETWORK_WDS)
> > #define CONNECTION_INFRA_BC (STA_TYPE_BC | NETWORK_INFRA)
> >
next prev parent reply other threads:[~2019-06-06 16:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 6:08 [PATCH v3 1/2] mt76: mt7615: enable support for mesh Ryder Lee
2019-06-03 6:08 ` [PATCH v3 2/2] mt76: mt7615: fix slow performance when enable encryption Ryder Lee
2019-06-07 17:02 ` Felix Fietkau
2019-06-06 10:11 ` [PATCH v3 1/2] mt76: mt7615: enable support for mesh Sebastian Gottschall
2019-06-06 16:19 ` Lorenzo Bianconi [this message]
2019-06-07 6:03 ` Sebastian Gottschall
2019-06-09 14:36 ` Sebastian Gottschall
2019-06-10 5:11 ` possible fix for broken cmac crypto support Sebastian Gottschall
2019-06-06 10:14 ` [PATCH v3 1/2] mt76: mt7615: enable support for mesh Sebastian Gottschall
2019-06-06 15:18 ` Ryder Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJ0CqmVBogQrqf4Gckr5gQ6tCrdZG=p60ZiC+-WW-yxt93+40Q@mail.gmail.com' \
--to=lorenzo.bianconi@redhat.com \
--cc=chih-min.Chen@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=royluo@google.com \
--cc=ryder.lee@mediatek.com \
--cc=s.gottschall@newmedia-net.de \
--cc=sean.wang@mediatek.com \
--cc=yf.luo@mediatek.com \
--cc=yiwei.chung@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).