Re: [PATCH v3 0/5] Add support for Fujitsu USB host controller

From: Sneeker Yeh <sneeker.yeh@gmail.com>
To: Felipe Balbi <balbi@ti.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Grant Likely <grant.likely@linaro.org>,
	Huang Rui <ray.huang@amd.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	Andy Green <andy.green@linaro.org>,
	Jassi Brar <jaswinder.singh@linaro.org>,
	Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>
Subject: Re: [PATCH v3 0/5] Add support for Fujitsu USB host controller
Date: Tue, 10 Feb 2015 23:43:57 +0800	[thread overview]
Message-ID: <CAJ1gpc1PD0quDyeUcNr+CdCm78cFMua0dPhdBp-veLXWZAZe5w@mail.gmail.com> (raw)
In-Reply-To: <20150130163815.GG15318@saruman.tx.rr.com>

Hi

2015-01-31 0:38 GMT+08:00 Felipe Balbi <balbi@ti.com>:
> Hi,
>
> On Thu, Jan 29, 2015 at 10:23:12AM -0600, Felipe Balbi wrote:
>> On Tue, Jan 27, 2015 at 09:22:50AM -0600, Felipe Balbi wrote:
>> > Hi,
>> >
>> > On Sun, Jan 25, 2015 at 04:13:23PM +0800, Sneeker Yeh wrote:
>> > > These patches add support for XHCI compliant Host controller found
>> > > on Fujitsu Socs, and are based on http://lwn.net/Articles/629162/
>> > > The first patch is to add Fujitsu glue layer of Synopsis DesignWare USB3 driver
>> > > and last four patch is about quirk implementation of errata in Synopsis
>> > > DesignWare USB3 IP.
>> > >
>> > > Patch 1 introduces a quirk with device disconnection management necessary
>> > > Synopsys Designware USB3 IP with versions < 3.00a and hardware configuration
>> > > DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. It solves a problem where without the
>> > > quirk, that host controller will die after a usb device is disconnected from
>> > > port of root hub.
>> > >
>> > > Patch 2 is to set Synopsis quirk in xhci platform driver based on xhci platform
>> > > data.
>> > >
>> > > Patch 3 is to add a revison number 2.90a and 3.00a of Synopsis DesignWare USB3
>> > > IP core driver.
>> > >
>> > > Patch 4 introduces using a quirk based on a errata of Synopsis
>> > > DesignWare USB3 IP which is versions < 3.00a and has hardware configuration
>> > > DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, which cannot be read from software. As a
>> > > result this quirk has to be enabled via platform data or device tree.
>> > >
>> > > Patch 5 introduces Fujitsu Specific Glue layer in Synopsis DesignWare USB3 IP
>> > > driver.
>> > >
>> >
>> > Mathias, let me know how you want to handle this. Either I take them
>> > all, or you take them all. What do you prefer ?
>>
>> Mathias ?
>
> Mathias, a reminder on this series.

Would any problem is still in my patchset?
e.g. I might still not arrange these patch in a appropriate order so
that Mathias cannot review and accept these?

BR,
Sneeker, sincerely

>
> --
> balbi