linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Magnus Karlsson <magnus.karlsson@gmail.com>
To: Wang Hai <wanghai38@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	"Björn Töpel" <bjorn@kernel.org>,
	"Karlsson, Magnus" <magnus.karlsson@intel.com>,
	"Jonathan Lemon" <jonathan.lemon@gmail.com>,
	"Fijalkowski, Maciej" <maciej.fijalkowski@intel.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Alexei Starovoitov" <ast@kernel.org>,
	"Daniel Borkmann" <daniel@iogearbox.net>,
	"Jesper Dangaard Brouer" <hawk@kernel.org>,
	"John Fastabend" <john.fastabend@gmail.com>,
	"Andrii Nakryiko" <andrii@kernel.org>,
	"Martin KaFai Lau" <kafai@fb.com>,
	"Song Liu" <songliubraving@fb.com>, "Yonghong Song" <yhs@fb.com>,
	"KP Singh" <kpsingh@kernel.org>, bpf <bpf@vger.kernel.org>,
	"Network Development" <netdev@vger.kernel.org>,
	"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH bpf] samples/bpf: Fix xdpsock with '-M' parameter missing unload process
Date: Mon, 28 Jun 2021 16:50:52 +0200	[thread overview]
Message-ID: <CAJ8uoz37m=J+2s7v9PBMqYZNyso7f_MseKQYZjvM2pyDYx1FbA@mail.gmail.com> (raw)
In-Reply-To: <20210628091815.2373487-1-wanghai38@huawei.com>

On Mon, Jun 28, 2021 at 11:20 AM Wang Hai <wanghai38@huawei.com> wrote:
>
> Execute the following command and exit, then execute it again, the
> following error will be reported.
>
> $ sudo ./samples/bpf/xdpsock -i ens4f2 -M
> ^C
> $ sudo ./samples/bpf/xdpsock -i ens4f2 -M
> libbpf: elf: skipping unrecognized data section(16) .eh_frame
> libbpf: elf: skipping relo section(17) .rel.eh_frame for section(16) .eh_frame
> libbpf: Kernel error message: XDP program already attached
> ERROR: link set xdp fd failed
>
> commit c9d27c9e8dc7 ("samples: bpf: Do not unload prog within xdpsock")
> removed the unload prog code because of the presence of bpf_link. This
> is fine if XDP_SHARED_UMEM is disable, but if it is enable, unload prog
> is still needed.

Thank you Wang.

Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>

> Fixes: c9d27c9e8dc7 ("samples: bpf: Do not unload prog within xdpsock")
> Signed-off-by: Wang Hai <wanghai38@huawei.com>
> ---
>  samples/bpf/xdpsock_user.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
>
> diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c
> index 53e300f860bb..33d0bdebbed8 100644
> --- a/samples/bpf/xdpsock_user.c
> +++ b/samples/bpf/xdpsock_user.c
> @@ -96,6 +96,7 @@ static int opt_xsk_frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE;
>  static int opt_timeout = 1000;
>  static bool opt_need_wakeup = true;
>  static u32 opt_num_xsks = 1;
> +static u32 prog_id;
>  static bool opt_busy_poll;
>  static bool opt_reduced_cap;
>
> @@ -461,6 +462,23 @@ static void *poller(void *arg)
>         return NULL;
>  }
>
> +static void remove_xdp_program(void)
> +{
> +       u32 curr_prog_id = 0;
> +
> +       if (bpf_get_link_xdp_id(opt_ifindex, &curr_prog_id, opt_xdp_flags)) {
> +               printf("bpf_get_link_xdp_id failed\n");
> +               exit(EXIT_FAILURE);
> +       }
> +
> +       if (prog_id == curr_prog_id)
> +               bpf_set_link_xdp_fd(opt_ifindex, -1, opt_xdp_flags);
> +       else if (!curr_prog_id)
> +               printf("couldn't find a prog id on a given interface\n");
> +       else
> +               printf("program on interface changed, not removing\n");
> +}
> +
>  static void int_exit(int sig)
>  {
>         benchmark_done = true;
> @@ -471,6 +489,9 @@ static void __exit_with_error(int error, const char *file, const char *func,
>  {
>         fprintf(stderr, "%s:%s:%i: errno: %d/\"%s\"\n", file, func,
>                 line, error, strerror(error));
> +
> +       if (opt_num_xsks > 1)
> +               remove_xdp_program();
>         exit(EXIT_FAILURE);
>  }
>
> @@ -490,6 +511,9 @@ static void xdpsock_cleanup(void)
>                 if (write(sock, &cmd, sizeof(int)) < 0)
>                         exit_with_error(errno);
>         }
> +
> +       if (opt_num_xsks > 1)
> +               remove_xdp_program();
>  }
>
>  static void swap_mac_addresses(void *data)
> @@ -857,6 +881,10 @@ static struct xsk_socket_info *xsk_configure_socket(struct xsk_umem_info *umem,
>         if (ret)
>                 exit_with_error(-ret);
>
> +       ret = bpf_get_link_xdp_id(opt_ifindex, &prog_id, opt_xdp_flags);
> +       if (ret)
> +               exit_with_error(-ret);
> +
>         xsk->app_stats.rx_empty_polls = 0;
>         xsk->app_stats.fill_fail_polls = 0;
>         xsk->app_stats.copy_tx_sendtos = 0;
> --
> 2.17.1
>

  reply	other threads:[~2021-06-28 15:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-28  9:18 [PATCH bpf] samples/bpf: Fix xdpsock with '-M' parameter missing unload process Wang Hai
2021-06-28 14:50 ` Magnus Karlsson [this message]
2021-07-05 21:39 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJ8uoz37m=J+2s7v9PBMqYZNyso7f_MseKQYZjvM2pyDYx1FbA@mail.gmail.com' \
    --to=magnus.karlsson@gmail.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bjorn@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=hawk@kernel.org \
    --cc=john.fastabend@gmail.com \
    --cc=jonathan.lemon@gmail.com \
    --cc=kafai@fb.com \
    --cc=kpsingh@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.fijalkowski@intel.com \
    --cc=magnus.karlsson@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=songliubraving@fb.com \
    --cc=wanghai38@huawei.com \
    --cc=yhs@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).