linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
Cc: kgene@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
	linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org,
	"linux-samsung-soc@vger.kernel.org" 
	<linux-samsung-soc@vger.kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	xc-racer2@live.ca
Subject: Re: [PATCH 4/7] ARM: s5pv210_defconfig: Enable drivers for Samsung Aries based phones
Date: Fri, 22 Jun 2018 09:54:20 +0200	[thread overview]
Message-ID: <CAJKOXPe3D5Qp_idZY57UJi2c10D7wEfTZ=W=PkzanK4NPf-WWg@mail.gmail.com> (raw)
In-Reply-To: <1529608199-5583-5-git-send-email-pawel.mikolaj.chmiel@gmail.com>

On 21 June 2018 at 21:09, Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> wrote:
> Enable config options required for Samsung Aries based phones..

Two dots.

> While we're here, also enable other useful options like:

Please split it. One set of changes needed for Aries and second set of
other useful changes with short explanation why they are needed. This
explanation might be for example:
1. because typical Linux distro or systemd requires them,
2. they are useful for debugging.

> - SYSVIPC
> - CGROUPS
> - DEVTMPFS
> - networking support
> - ext4 and autofs
>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
>  arch/arm/configs/s5pv210_defconfig | 49 +++++++++++++++++++++++++++++++++++---
>  1 file changed, 46 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
> index 09b5a7386414..a077597369f1 100644
> --- a/arch/arm/configs/s5pv210_defconfig
> +++ b/arch/arm/configs/s5pv210_defconfig
> @@ -1,5 +1,7 @@
> +CONFIG_SYSVIPC=y
>  CONFIG_NO_HZ=y
>  CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_CGROUPS=y
>  CONFIG_SYSFS_DEPRECATED=y
>  CONFIG_SYSFS_DEPRECATED_V2=y
>  CONFIG_BLK_DEV_INITRD=y
> @@ -13,28 +15,68 @@ CONFIG_SOLARIS_X86_PARTITION=y
>  CONFIG_ARCH_S5PV210=y
>  CONFIG_VMSPLIT_2G=y
>  CONFIG_PREEMPT=y
> -CONFIG_AEABI=y

I believe this comes from savedefconfig. In such case please make it a
separate commit, before all others, because it should not bring any
functional differences.

Best regards,
Krzysztof

> +CONFIG_ARM_APPENDED_DTB=y
>  CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
>  CONFIG_VFP=y
>  CONFIG_NEON=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IP_PNP_BOOTP=y
> +CONFIG_IP_PNP_RARP=y
> +CONFIG_CFG80211=m
> +CONFIG_MAC80211=m
>  CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
>  CONFIG_BLK_DEV_LOOP=y
>  CONFIG_BLK_DEV_RAM=y
>  CONFIG_BLK_DEV_RAM_SIZE=8192
>  CONFIG_SCSI=y
>  CONFIG_BLK_DEV_SD=y
>  CONFIG_CHR_DEV_SG=y
> +CONFIG_NETDEVICES=y
> +CONFIG_BRCMFMAC=m
>  CONFIG_INPUT_EVDEV=y
> -# CONFIG_INPUT_KEYBOARD is not set
> +CONFIG_KEYBOARD_GPIO=y
>  # CONFIG_INPUT_MOUSE is not set
>  CONFIG_INPUT_TOUCHSCREEN=y
>  CONFIG_SERIAL_8250=y
>  CONFIG_SERIAL_SAMSUNG=y
>  CONFIG_SERIAL_SAMSUNG_CONSOLE=y
>  CONFIG_HW_RANDOM=y
> +CONFIG_I2C_GPIO=y
> +CONFIG_POWER_SUPPLY=y
> +CONFIG_BATTERY_MAX17040=y
>  # CONFIG_HWMON is not set
> -# CONFIG_USB_SUPPORT is not set
> +CONFIG_MFD_MAX8998=y
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_MAX8998=y
> +CONFIG_DRM=y
> +CONFIG_DRM_EXYNOS=y
> +CONFIG_DRM_EXYNOS_FIMD=y
> +CONFIG_DRM_EXYNOS_DPI=y
> +CONFIG_USB=y
> +CONFIG_USB_OTG=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_EXYNOS=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_EXYNOS=y
> +CONFIG_USB_DWC2=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_S3C=y
> +CONFIG_MMC_SDHCI_S3C_DMA=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_MAX8998=m
> +CONFIG_PHY_SAMSUNG_USB2=m
> +CONFIG_PHY_S5PV210_USB2=y
>  CONFIG_EXT2_FS=y
> +CONFIG_EXT4_FS=y
> +CONFIG_AUTOFS4_FS=y
>  CONFIG_MSDOS_FS=y
>  CONFIG_VFAT_FS=y
>  CONFIG_TMPFS=y
> @@ -44,6 +86,7 @@ CONFIG_ROMFS_FS=y
>  CONFIG_NLS_CODEPAGE_437=y
>  CONFIG_NLS_ASCII=y
>  CONFIG_NLS_ISO8859_1=y
> +CONFIG_NLS_UTF8=y
>  CONFIG_DEBUG_INFO=y
>  CONFIG_MAGIC_SYSRQ=y
>  CONFIG_DEBUG_KERNEL=y
> --
> 2.7.4
>

  reply	other threads:[~2018-06-22  7:54 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-21 19:09 [PATCH 0/7] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
2018-06-21 19:09 ` [PATCH 1/7] ARM: dts: s5pv210: Add missing interrupt-controller property to gph2 Paweł Chmiel
2018-06-21 19:09 ` [PATCH 2/7] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones Paweł Chmiel
2018-06-22  7:41   ` Krzysztof Kozlowski
2018-06-22 10:15     ` Paweł Chmiel
2018-06-21 19:09 ` [PATCH 3/7] ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone Paweł Chmiel
2018-06-22  7:49   ` Krzysztof Kozlowski
2018-06-22  8:42     ` Paweł Chmiel
2018-06-22  8:51       ` Krzysztof Kozlowski
2018-06-21 19:09 ` [PATCH 4/7] ARM: s5pv210_defconfig: Enable drivers for Samsung Aries based phones Paweł Chmiel
2018-06-22  7:54   ` Krzysztof Kozlowski [this message]
2018-06-21 19:09 ` [PATCH 5/7] dt-bindings: samsung: Document bindings for Samsung aries boards Paweł Chmiel
2018-06-22  7:56   ` Krzysztof Kozlowski
2018-06-22  7:57     ` Krzysztof Kozlowski
2018-06-27 17:21   ` Rob Herring
2018-06-21 19:09 ` [PATCH 6/7] ARM: dts: s5pv210: Add initial DTS config for SGH-T959P phone Paweł Chmiel
2018-06-22  7:58   ` Krzysztof Kozlowski
2018-06-21 19:09 ` [PATCH 7/7] dt-bindings: samsung: Document binding for SGH-T959P board Paweł Chmiel
2018-06-22  7:59   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJKOXPe3D5Qp_idZY57UJi2c10D7wEfTZ=W=PkzanK4NPf-WWg@mail.gmail.com' \
    --to=krzk@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.mikolaj.chmiel@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=xc-racer2@live.ca \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).