linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hsin-Yi Wang <hsinyi@chromium.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
	<linux-arm-kernel@lists.infradead.org>,
	Devicetree List <devicetree@vger.kernel.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-mediatek@lists.infradead.org>,
	lkml <linux-kernel@vger.kernel.org>,
	Maoguang Meng <maoguang.meng@mediatek.com>,
	Yong Wu <yong.wu@mediatek.com>
Subject: Re: [PATCH v5 RESEND 1/3] dt-bindings: mediatek: convert mtk jpeg decoder/encoder to yaml
Date: Fri, 24 Sep 2021 14:02:22 +0800	[thread overview]
Message-ID: <CAJMQK-h090rkRJdzfq_4YkRqwwaU7Wn-p3i0Zc+8-7hVzx+8sA@mail.gmail.com> (raw)
In-Reply-To: <20210702102304.3346429-1-hsinyi@chromium.org>

On Fri, Jul 2, 2021 at 6:23 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Convert mediatek jpeg decoder and encoder bindings to yaml.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Rob Herring <robh@kernel.org>

Kindly ping on these patches.

> ---
>  .../bindings/media/mediatek-jpeg-decoder.txt  | 38 --------
>  .../bindings/media/mediatek-jpeg-decoder.yaml | 89 +++++++++++++++++++
>  .../bindings/media/mediatek-jpeg-encoder.txt  | 35 --------
>  .../bindings/media/mediatek-jpeg-encoder.yaml | 80 +++++++++++++++++
>  4 files changed, 169 insertions(+), 73 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
> deleted file mode 100644
> index 39c1028b2dfb4..0000000000000
> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -* Mediatek JPEG Decoder
> -
> -Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
> -
> -Required properties:
> -- compatible : must be one of the following string:
> -       "mediatek,mt8173-jpgdec"
> -       "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
> -       "mediatek,mt2701-jpgdec"
> -- reg : physical base address of the jpeg decoder registers and length of
> -  memory mapped region.
> -- interrupts : interrupt number to the interrupt controller.
> -- clocks: device clocks, see
> -  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> -- clock-names: must contain "jpgdec-smi" and "jpgdec".
> -- power-domains: a phandle to the power domain, see
> -  Documentation/devicetree/bindings/power/power_domain.txt for details.
> -- mediatek,larb: must contain the local arbiters in the current Socs, see
> -  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> -  for details.
> -- iommus: should point to the respective IOMMU block with master port as
> -  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
> -  for details.
> -
> -Example:
> -       jpegdec: jpegdec@15004000 {
> -               compatible = "mediatek,mt2701-jpgdec";
> -               reg = <0 0x15004000 0 0x1000>;
> -               interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
> -               clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
> -                         <&imgsys CLK_IMG_JPGDEC>;
> -               clock-names = "jpgdec-smi",
> -                             "jpgdec";
> -               power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> -               mediatek,larb = <&larb2>;
> -               iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
> -                        <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
> -       };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> new file mode 100644
> index 0000000000000..9b87f036f1785
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> @@ -0,0 +1,89 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek JPEG Decoder Device Tree Bindings
> +
> +maintainers:
> +  - Xia Jiang <xia.jiang@mediatek.com>
> +
> +description: |-
> +  Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - mediatek,mt8173-jpgdec
> +              - mediatek,mt2701-jpgdec
> +      - items:
> +          - enum:
> +              - mediatek,mt7623-jpgdec
> +          - const: mediatek,mt2701-jpgdec
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 2
> +    minItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: jpgdec-smi
> +      - const: jpgdec
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  mediatek,larb:
> +    $ref: '/schemas/types.yaml#/definitions/phandle'
> +    description: |
> +      Must contain the local arbiters in the current Socs, see
> +      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> +      for details.
> +
> +  iommus:
> +    maxItems: 2
> +    description: |
> +      Points to the respective IOMMU block with master port as argument, see
> +      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
> +      Ports are according to the HW.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - mediatek,larb
> +  - iommus
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt2701-clk.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/memory/mt2701-larb-port.h>
> +    #include <dt-bindings/power/mt2701-power.h>
> +    jpegdec: jpegdec@15004000 {
> +      compatible = "mediatek,mt2701-jpgdec";
> +      reg = <0x15004000 0x1000>;
> +      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
> +      clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
> +                <&imgsys CLK_IMG_JPGDEC>;
> +      clock-names = "jpgdec-smi",
> +                    "jpgdec";
> +      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> +      mediatek,larb = <&larb2>;
> +      iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
> +               <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
> +    };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> deleted file mode 100644
> index 5e53c6ab52d01..0000000000000
> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -* MediaTek JPEG Encoder
> -
> -MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
> -
> -Required properties:
> -- compatible : "mediatek,mt2701-jpgenc"
> -  followed by "mediatek,mtk-jpgenc"
> -- reg : physical base address of the JPEG encoder registers and length of
> -  memory mapped region.
> -- interrupts : interrupt number to the interrupt controller.
> -- clocks: device clocks, see
> -  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> -- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
> -- power-domains: a phandle to the power domain, see
> -  Documentation/devicetree/bindings/power/power_domain.txt for details.
> -- mediatek,larb: must contain the local arbiters in the current SoCs, see
> -  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> -  for details.
> -- iommus: should point to the respective IOMMU block with master port as
> -  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
> -  for details.
> -
> -Example:
> -       jpegenc: jpegenc@1500a000 {
> -               compatible = "mediatek,mt2701-jpgenc",
> -                            "mediatek,mtk-jpgenc";
> -               reg = <0 0x1500a000 0 0x1000>;
> -               interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> -               clocks =  <&imgsys CLK_IMG_VENC>;
> -               clock-names = "jpgenc";
> -               power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> -               mediatek,larb = <&larb2>;
> -               iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
> -                        <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
> -       };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> new file mode 100644
> index 0000000000000..5e35ecfd21f1b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek JPEG Encoder Device Tree Bindings
> +
> +maintainers:
> +  - Xia Jiang <xia.jiang@mediatek.com>
> +
> +description: |-
> +  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - mediatek,mt2701-jpgenc
> +      - const: mediatek,mtk-jpgenc
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: jpgenc
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  mediatek,larb:
> +    $ref: '/schemas/types.yaml#/definitions/phandle'
> +    description: |
> +      Must contain the local arbiters in the current Socs, see
> +      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> +      for details.
> +
> +  iommus:
> +    maxItems: 2
> +    description: |
> +      Points to the respective IOMMU block with master port as argument, see
> +      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
> +      Ports are according to the HW.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - mediatek,larb
> +  - iommus
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt2701-clk.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/memory/mt2701-larb-port.h>
> +    #include <dt-bindings/power/mt2701-power.h>
> +    jpegenc: jpegenc@1500a000 {
> +      compatible = "mediatek,mt2701-jpgenc",
> +                   "mediatek,mtk-jpgenc";
> +      reg = <0x1500a000 0x1000>;
> +      interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> +      clocks =  <&imgsys CLK_IMG_VENC>;
> +      clock-names = "jpgenc";
> +      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> +      mediatek,larb = <&larb2>;
> +      iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
> +               <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
> +    };
> --
> 2.32.0.93.g670b81a890-goog
>

      parent reply	other threads:[~2021-09-24  6:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-02 10:23 [PATCH v5 RESEND 1/3] dt-bindings: mediatek: convert mtk jpeg decoder/encoder to yaml Hsin-Yi Wang
2021-07-02 10:23 ` [PATCH v5 RESEND 2/3] dt-bindings: mediatek: Add mediatek, mt8183-jpgenc compatible Hsin-Yi Wang
2021-07-02 10:23 ` [PATCH v5 RESEND 3/3] arm64: dts: mt8183: add jpeg enc node for mt8183 Hsin-Yi Wang
2021-09-24  6:02 ` Hsin-Yi Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJMQK-h090rkRJdzfq_4YkRqwwaU7Wn-p3i0Zc+8-7hVzx+8sA@mail.gmail.com \
    --to=hsinyi@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=maoguang.meng@mediatek.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=yong.wu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).