Re: [PATCH v2] PCI: Run platform power transition on initial D0 entry

["Rafael J. Wysocki" <rafael@kernel.org>]

On Mon, Mar 15, 2021 at 7:28 PM Maximilian Luz <luzmaximilian@gmail.com> wrote:
>
> On 3/15/21 4:34 PM, Rafael J. Wysocki wrote:
> > On Sun, Mar 14, 2021 at 1:06 AM Maximilian Luz <luzmaximilian@gmail.com> wrote:
> >>
> >> On some devices and platforms, the initial platform (e.g. ACPI) power
> >> state is not in sync with the power state of the PCI device.
> >>
> >> This seems like it is, for all intents and purposes, an issue with the
> >> device firmware (e.g. ACPI). On some devices, specifically Microsoft
> >> Surface Books 2 and 3, we encounter ACPI code akin to the following
> >> power resource, corresponding to a PCI device:
> >>
> >>      PowerResource (PRP5, 0x00, 0x0000)
> >>      {
> >>          // Initialized to zero, i.e. off. There is no logic for checking
> >>          // the actual state dynamically.
> >>          Name (_STA, Zero)
> >>
> >>          Method (_ON, 0, Serialized)
> >>          {
> >>              // ... code omitted ...
> >>              _STA = One
> >>          }
> >>
> >>          Method (_OFF, 0, Serialized)
> >>          {
> >>              // ... code omitted ...
> >>              _STA = Zero
> >>          }
> >>      }
> >>
> >> This resource is initialized to 'off' and does not have any logic for
> >> checking its actual state, i.e. the state of the corresponding PCI
> >> device. The stored state of this resource can only be changed by running
> >> the (platform/ACPI) power transition functions (i.e. _ON and _OFF).
> >
> > Well, there is _STA that returns "off" initially, so the OS should set
> > the initial state of the device to D3cold and transition it into D0 as
> > appropriate (i.e. starting with setting all of the power resources
> > used by it to "on").
> >
> >> This means that, at boot, the PCI device power state is out of sync with
> >> the power state of the corresponding ACPI resource.
> >>
> >> During initial bring-up of a PCI device, pci_enable_device_flags()
> >> updates its PCI core state (from initially 'unknown') by reading from
> >> its PCI_PM_CTRL register. It does, however, not check if the platform
> >> (here ACPI) state is in sync with/valid for the actual device state and
> >> needs updating.
> >
> > Well, that's inconsistent.
> >
> > Also, it is rather pointless to update the device's power state at
> > this point, because nothing between this point and the later
> > do_pci_enable_device() call in this function requires its
> > current_state to be up to date AFAICS.
> >
> > Have you tried to drop the power state update from
> > pci_enable_device_flags()?  [Note that we're talking about relatively
> > old code here and it looks like that code is not necessary any more.]
>
> I had not tried this before, as I assumed the comment was still
> relevant. I did test that now and it works! I can't detect any
> regressions.
>
> Do you want to send this in or should I do that?

I'll post it, thanks!