Re: [PATCH] scsi/dpt_i2o.c: Use dma_zalloc_coherent

From: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
To: aacraid@microsemi.com, jejb@linux.vnet.ibm.com,
	martin.petersen@oracle.com
Cc: Souptick Joarder <jrdr.linux@gmail.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Brajeswar Ghosh <brajeswar.linux@gmail.com>
Subject: Re: [PATCH] scsi/dpt_i2o.c: Use dma_zalloc_coherent
Date: Sat, 1 Dec 2018 18:45:23 +0530	[thread overview]
Message-ID: <CAJr6mf2Kvj0FJb2zf9FZUNEkyQtYZVbFNBwG+dH_LyhSDU92wg@mail.gmail.com> (raw)
In-Reply-To: <5bf00de4.1c69fb81.7dd65.5785@mx.google.com>

On Sat, Nov 17, 2018 at 6:17 PM Sabyasachi Gupta
<sabyasachi.linux@gmail.com> wrote:
>
> Replaced dma_alloc_coherent + memset with dma_zalloc_coherent
>
> Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>

Any comment on this patch?

> ---
>  drivers/scsi/dpt_i2o.c | 12 ++++--------
>  1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
> index 37de8fb..056383a 100644
> --- a/drivers/scsi/dpt_i2o.c
> +++ b/drivers/scsi/dpt_i2o.c
> @@ -1370,13 +1370,12 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
>                 schedule_timeout_uninterruptible(1);
>         } while (m == EMPTY_QUEUE);
>
> -       status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
> +       status = dma_zalloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
>         if(status == NULL) {
>                 adpt_send_nop(pHba, m);
>                 printk(KERN_ERR"IOP reset failed - no free memory.\n");
>                 return -ENOMEM;
>         }
> -       memset(status,0,4);
>
>         msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
>         msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
> @@ -2836,14 +2835,13 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
>
>         msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
>
> -       status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
> +       status = dma_zalloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
>         if (!status) {
>                 adpt_send_nop(pHba, m);
>                 printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
>                         pHba->name);
>                 return -ENOMEM;
>         }
> -       memset(status, 0, 4);
>
>         writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
>         writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
> @@ -2890,14 +2888,13 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
>                         pHba->reply_pool, pHba->reply_pool_pa);
>         }
>
> -       pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev,
> +       pHba->reply_pool = dma_zalloc_coherent(&pHba->pDev->dev,
>                                 pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
>                                 &pHba->reply_pool_pa, GFP_KERNEL);
>         if (!pHba->reply_pool) {
>                 printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
>                 return -ENOMEM;
>         }
> -       memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
>
>         for(i = 0; i < pHba->reply_fifo_size; i++) {
>                 writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
> @@ -3126,13 +3123,12 @@ static int adpt_i2o_build_sys_table(void)
>         sys_tbl_len = sizeof(struct i2o_sys_tbl) +      // Header + IOPs
>                                 (hba_count) * sizeof(struct i2o_sys_tbl_entry);
>
> -       sys_tbl = dma_alloc_coherent(&pHba->pDev->dev,
> +       sys_tbl = dma_zalloc_coherent(&pHba->pDev->dev,
>                                 sys_tbl_len, &sys_tbl_pa, GFP_KERNEL);
>         if (!sys_tbl) {
>                 printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");
>                 return -ENOMEM;
>         }
> -       memset(sys_tbl, 0, sys_tbl_len);
>
>         sys_tbl->num_entries = hba_count;
>         sys_tbl->version = I2OVERSION;
> --
> 2.7.4
>