linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan Wu <cooloney@gmail.com>
To: Andreas Werner <andreas.werner@men.de>
Cc: lkml <linux-kernel@vger.kernel.org>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Lee Jones <lee.jones@linaro.org>,
	linux@roeck-us.net, lm-sensors@lm-sensors.org, wim@iguana.be,
	linux-watchdog@vger.kernel.org,
	"rpurdie@rpsys.net" <rpurdie@rpsys.net>,
	Linux LED Subsystem <linux-leds@vger.kernel.org>
Subject: Re: [PATCH v6 3/4] drivers/leds/leds-menf21bmc: introduce MEN 14F021P00 BMC LED driver
Date: Thu, 28 Aug 2014 10:54:58 -0700	[thread overview]
Message-ID: <CAK5ve-+zjZBw_HXWm9kGE5Vbv=R2SO4P2dB_0opzLHTAV-BQ0Q@mail.gmail.com> (raw)
In-Reply-To: <e91e4f47cda55c03fa1d0a54c0891341d73adfa6.1409161615.git.andreas.werner@men.de>

On Wed, Aug 27, 2014 at 10:52 AM, Andreas Werner <andreas.werner@men.de> wrote:
> Added driver to support the 14F021P00 BMC LEDs.
> The BMC is a Board Management Controller including four LEDs which
> can be switched on and off.
>

Please go ahead with my Ack
Acked-by: Bryan Wu <cooloney@gmail.com>

Lee, will you merge this through your tree? I think we do that in one
shot is better.

Thanks,
-Bryan

> Signed-off-by: Andreas Werner <andreas.werner@men.de>
> ---
>  drivers/leds/Kconfig          |   9 +++
>  drivers/leds/Makefile         |   1 +
>  drivers/leds/leds-menf21bmc.c | 131 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 141 insertions(+)
>  create mode 100644 drivers/leds/leds-menf21bmc.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 27cf0cd..ec03457 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -458,6 +458,15 @@ config LEDS_OT200
>           This option enables support for the LEDs on the Bachmann OT200.
>           Say Y to enable LEDs on the Bachmann OT200.
>
> +config LEDS_MENF21BMC
> +       tristate "LED support for the MEN 14F021P00 BMC"
> +       depends on LEDS_CLASS && MFD_MENF21BMC
> +       help
> +         Say Y here to include support for the MEN 14F021P00 BMC LEDs.
> +
> +         This driver can also be built as a module. If so the module
> +         will be called leds-menf21bmc.
> +
>  comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
>
>  config LEDS_BLINKM
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 3c03666..cadc433 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -53,6 +53,7 @@ obj-$(CONFIG_LEDS_MAX8997)            += leds-max8997.o
>  obj-$(CONFIG_LEDS_LM355x)              += leds-lm355x.o
>  obj-$(CONFIG_LEDS_BLINKM)              += leds-blinkm.o
>  obj-$(CONFIG_LEDS_VERSATILE)           += leds-versatile.o
> +obj-$(CONFIG_LEDS_MENF21BMC)           += leds-menf21bmc.o
>
>  # LED SPI Drivers
>  obj-$(CONFIG_LEDS_DAC124S085)          += leds-dac124s085.o
> diff --git a/drivers/leds/leds-menf21bmc.c b/drivers/leds/leds-menf21bmc.c
> new file mode 100644
> index 0000000..89dd577
> --- /dev/null
> +++ b/drivers/leds/leds-menf21bmc.c
> @@ -0,0 +1,131 @@
> +/*
> + *  MEN 14F021P00 Board Management Controller (BMC) LEDs Driver.
> + *
> + *  This is the core LED driver of the MEN 14F021P00 BMC.
> + *  There are four LEDs available which can be switched on and off.
> + *  STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2
> + *
> + *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
> + *
> + *  This program is free software; you can redistribute  it and/or modify it
> + *  under  the terms of  the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the  License, or (at your
> + *  option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +#include <linux/i2c.h>
> +
> +#define BMC_CMD_LED_GET_SET    0xA0
> +#define BMC_BIT_LED_STATUS     BIT(0)
> +#define BMC_BIT_LED_HOTSWAP    BIT(1)
> +#define BMC_BIT_LED_USER1      BIT(2)
> +#define BMC_BIT_LED_USER2      BIT(3)
> +
> +struct menf21bmc_led {
> +       struct led_classdev cdev;
> +       u8 led_bit;
> +       const char *name;
> +       struct i2c_client *i2c_client;
> +};
> +
> +static struct menf21bmc_led leds[] = {
> +       {
> +               .name = "menf21bmc:led_status",
> +               .led_bit = BMC_BIT_LED_STATUS,
> +       },
> +       {
> +               .name = "menf21bmc:led_hotswap",
> +               .led_bit = BMC_BIT_LED_HOTSWAP,
> +       },
> +       {
> +               .name = "menf21bmc:led_user1",
> +               .led_bit = BMC_BIT_LED_USER1,
> +       },
> +       {
> +               .name = "menf21bmc:led_user2",
> +               .led_bit = BMC_BIT_LED_USER2,
> +       }
> +};
> +
> +static DEFINE_MUTEX(led_lock);
> +
> +static void
> +menf21bmc_led_set(struct led_classdev *led_cdev, enum led_brightness value)
> +{
> +       int led_val;
> +       struct menf21bmc_led *led = container_of(led_cdev,
> +                                       struct menf21bmc_led, cdev);
> +
> +       mutex_lock(&led_lock);
> +       led_val = i2c_smbus_read_byte_data(led->i2c_client,
> +                                          BMC_CMD_LED_GET_SET);
> +       if (led_val < 0)
> +               goto err_out;
> +
> +       if (value == LED_OFF)
> +               led_val &= ~led->led_bit;
> +       else
> +               led_val |= led->led_bit;
> +
> +       i2c_smbus_write_byte_data(led->i2c_client,
> +                                 BMC_CMD_LED_GET_SET, led_val);
> +err_out:
> +       mutex_unlock(&led_lock);
> +}
> +
> +static int menf21bmc_led_probe(struct platform_device *pdev)
> +{
> +       int i;
> +       int ret;
> +       struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
> +
> +       for (i = 0; i < ARRAY_SIZE(leds); i++) {
> +               leds[i].cdev.name = leds[i].name;
> +               leds[i].cdev.brightness_set = menf21bmc_led_set;
> +               leds[i].i2c_client = i2c_client;
> +               ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
> +               if (ret < 0)
> +                       goto err_free_leds;
> +       }
> +       dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n");
> +
> +       return 0;
> +
> +err_free_leds:
> +       dev_err(&pdev->dev, "failed to register LED device\n");
> +
> +       for (i = i - 1; i >= 0; i--)
> +               led_classdev_unregister(&leds[i].cdev);
> +
> +       return ret;
> +}
> +
> +static int menf21bmc_led_remove(struct platform_device *pdev)
> +{
> +       int i;
> +
> +       for (i = 0; i < ARRAY_SIZE(leds); i++)
> +               led_classdev_unregister(&leds[i].cdev);
> +
> +       return 0;
> +}
> +
> +static struct platform_driver menf21bmc_led = {
> +       .probe          = menf21bmc_led_probe,
> +       .remove         = menf21bmc_led_remove,
> +       .driver         = {
> +               .name           = "menf21bmc_led",
> +               .owner          = THIS_MODULE,
> +       },
> +};
> +
> +module_platform_driver(menf21bmc_led);
> +
> +MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
> +MODULE_DESCRIPTION("MEN 14F021P00 BMC led driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:menf21bmc_led");
> --
> 2.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-leds" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2014-08-28 17:55 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-27 17:51 [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series Andreas Werner
2014-08-27 17:51 ` [PATCH v6 1/4] drivers/mfd/menf21bmc: introduce MEN 14F021P00 BMC MFD Core driver Andreas Werner
2014-08-28  7:37   ` Lee Jones
2014-08-27 17:52 ` [PATCH v6 2/4] drivers/watchdog/menf21bmc_wdt: introduce MEN 14F021P00 BMC Watchdog driver Andreas Werner
2014-09-04  9:14   ` Lee Jones
2014-09-24 12:35   ` Lee Jones
2014-09-24 13:24     ` Guenter Roeck
2014-09-24 14:13       ` Lee Jones
2014-09-24 14:14         ` Lee Jones
2014-08-27 17:52 ` [PATCH v6 3/4] drivers/leds/leds-menf21bmc: introduce MEN 14F021P00 BMC LED driver Andreas Werner
2014-08-28 17:54   ` Bryan Wu [this message]
2014-08-29  6:59     ` Lee Jones
2014-08-29 11:38       ` Andreas Werner
2014-08-29 10:59         ` Lee Jones
2014-08-27 17:53 ` [PATCH v6 4/4] drivers/hwmon/menf21bmc_hwmon: introduce MEN14F021P00 BMC HWMON driver Andreas Werner
2014-08-27 18:38   ` Guenter Roeck
2014-08-28  8:16     ` Andreas Werner
2014-09-15  7:36 ` [PATCH] MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC Andreas Werner
2014-09-15 22:42   ` Lee Jones
2014-09-16  8:22     ` Andreas Werner
2014-09-24 13:45 ` [GIT PULL] Immutable branch between MFD, HWMON, LEDs and Watchdog Lee Jones
2014-09-24 14:48 ` [PATCH v6 0/4] Introduce MEN 14F021P00 BMC driver series Lee Jones
2014-09-24 15:45   ` Guenter Roeck
2014-09-24 16:18     ` Lee Jones
2014-09-24 16:28       ` Guenter Roeck
2014-09-24 16:33       ` Bryan Wu
2014-09-24 16:57         ` Guenter Roeck
2014-09-24 18:07           ` Bryan Wu
2014-09-24 18:41           ` Lee Jones
2014-09-25  6:58             ` Wim Van Sebroeck
2014-09-25  8:26             ` Andreas Werner
2014-09-25  7:42               ` Lee Jones
2014-09-24 14:49 ` [GIT PULL] MFD: Immutable branch between HWMON, LEDs and Watchdog Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAK5ve-+zjZBw_HXWm9kGE5Vbv=R2SO4P2dB_0opzLHTAV-BQ0Q@mail.gmail.com' \
    --to=cooloney@gmail.com \
    --cc=andreas.werner@men.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lm-sensors@lm-sensors.org \
    --cc=rpurdie@rpsys.net \
    --cc=sameo@linux.intel.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).