From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: Joel Stanley <joel@jms.id.au>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>,
Michal Marek <michal.lkml@markovi.net>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] kbuild: terminate Kconfig when $(CC) or $(LD) is missing
Date: Mon, 13 May 2019 11:49:45 +0900 [thread overview]
Message-ID: <CAK7LNAS71K4my-eyYryViy_uQ0LR5hbzyMjAwZUta99pU=0X9g@mail.gmail.com> (raw)
In-Reply-To: <CACPK8XdVZHtCtHzv9vmt8C877SBbZNqRPxT9iUe0+8-o7X9W7g@mail.gmail.com>
On Mon, May 13, 2019 at 11:35 AM Joel Stanley <joel@jms.id.au> wrote:
>
> On Mon, 13 May 2019 at 02:28, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> >
> > On Thu, May 9, 2019 at 4:36 PM Masahiro Yamada
> > <yamada.masahiro@socionext.com> wrote:
> > >
> > > If the compiler specified by $(CC) is not present, the Kconfig stage
> > > sprinkles 'not found' messages, then succeeds.
> > >
> > > $ make CROSS_COMPILE=foo defconfig
> > > /bin/sh: 1: foogcc: not found
> > > /bin/sh: 1: foogcc: not found
> > > *** Default configuration is based on 'x86_64_defconfig'
> > > ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> > > ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> > > ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> > > ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> > > ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> > > ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> > > ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
> > > ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
> > > init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
> > > #
> > > # configuration written to .config
> > > #
> > >
> > > Terminate parsing files immediately if $(CC) or $(LD) is not found.
> > > "make *config" will fail more nicely.
> > >
> > > $ make CROSS_COMPILE=foo defconfig
> > > *** Default configuration is based on 'x86_64_defconfig'
> > > scripts/Kconfig.include:34: compiler 'foogcc' not found
> > > make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
> > > make: *** [Makefile;557: defconfig] Error 2
> > >
> > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > > ---
> >
> > Applied to linux-kbuild.
>
> Thanks Masahiro! I had this in my inbox to test but you're too efficient.
>
> Testing your patch on linus' tree as of today (d7a02fa0a8f9) gives me
> this output:
>
> $ CROSS_COMPILE=foo make
> make: foogcc: Command not found
> scripts/kconfig/conf --syncconfig Kconfig
> scripts/Kconfig.include:34: compiler 'foogcc' not found
> make[2]: *** [scripts/kconfig/Makefile:69: syncconfig] Error 1
> make[1]: *** [Makefile:557: syncconfig] Error 2
> make: *** [include/config/auto.conf.cmd] Deleting file
> 'include/config/tristate.conf'
> make: Failed to remake makefile 'include/config/auto.conf'.
> SYSTBL arch/x86/include/generated/asm/syscalls_32.h
> SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h
> SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h
> SYSTBL arch/x86/include/generated/asm/syscalls_64.h
> SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
> SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
> SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h
> HOSTCC arch/x86/tools/relocs_32.o
> HOSTCC arch/x86/tools/relocs_64.o
> HOSTCC arch/x86/tools/relocs_common.o
> HOSTLD arch/x86/tools/relocs
> UPD include/config/kernel.release
> WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h
> WRAP arch/x86/include/generated/uapi/asm/poll.h
> WRAP arch/x86/include/generated/uapi/asm/socket.h
> WRAP arch/x86/include/generated/uapi/asm/sockios.h
> WRAP arch/x86/include/generated/asm/dma-contiguous.h
> WRAP arch/x86/include/generated/asm/early_ioremap.h
> WRAP arch/x86/include/generated/asm/export.h
> WRAP arch/x86/include/generated/asm/mcs_spinlock.h
> WRAP arch/x86/include/generated/asm/mm-arch-hooks.h
> WRAP arch/x86/include/generated/asm/mmiowb.h
> UPD include/generated/uapi/linux/version.h
> UPD include/generated/utsrelease.h
> HOSTCC scripts/selinux/genheaders/genheaders
> HOSTCC scripts/selinux/mdp/mdp
> HOSTCC scripts/kallsyms
> HOSTCC scripts/pnmtologo
> HOSTCC scripts/conmakehash
> HOSTCC scripts/sortextable
> HOSTCC scripts/asn1_compiler
> HOSTCC scripts/extract-cert
> You are building kernel with non-retpoline compiler.
> Please update your compiler.
> make: *** [arch/x86/Makefile:308: checkbin] Error 1
>
> Which is a little confusing.
>
> The second time is shorter, but the retpoline message is not ideal:
>
> $ CROSS_COMPILE=foo make
> make: foogcc: Command not found
> scripts/kconfig/conf --syncconfig Kconfig
> scripts/Kconfig.include:34: compiler 'foogcc' not found
> make[2]: *** [scripts/kconfig/Makefile:69: syncconfig] Error 1
> make[1]: *** [Makefile:557: syncconfig] Error 2
> make: Failed to remake makefile 'include/config/auto.conf'.
> You are building kernel with non-retpoline compiler.
> Please update your compiler.
I think you are seeing a different bug.
Please test after applying this as well:
https://patchwork.kernel.org/patch/10939845/
Thanks.
--
Best Regards
Masahiro Yamada
next prev parent reply other threads:[~2019-05-13 2:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-09 7:35 [PATCH] kbuild: terminate Kconfig when $(CC) or $(LD) is missing Masahiro Yamada
2019-05-13 2:27 ` Masahiro Yamada
2019-05-13 2:35 ` Joel Stanley
2019-05-13 2:49 ` Masahiro Yamada [this message]
2019-05-13 4:07 ` Joel Stanley
2019-05-13 4:47 ` Nathan Chancellor
2019-05-14 2:54 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAK7LNAS71K4my-eyYryViy_uQ0LR5hbzyMjAwZUta99pU=0X9g@mail.gmail.com' \
--to=yamada.masahiro@socionext.com \
--cc=joel@jms.id.au \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.lkml@markovi.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).